8003154730 or skivoipllc is a leading VoIP service provider.It provides high quality VoIP services at cheap costs. Skivoipllc is a global broadband telecommunications provider. We are serving corporate customers, small business and residential users throughout the US.
2. About us
âȘ Skivoipllc is a global broadband telecommunications provider.We are serving
corporates customers, small business and residential users throughout the US.
OurVoice-over-IP network allows anyone with a touch-tone phone and a broadband
connection to call anywhere in the world.
âȘ We provide unlimited nationwide calling plans and low international rates.We pride
ourselves as one of the FEW companies in theVoIP industry that does NOT have
HIDDEN FEES. Further,Voice quality is of utmost importance to us, which is not
compromised despite our extremely low prices.
âȘ Our mission is to provide a low-price, high-quality telephone service that is regarded
as having the BEST value to our consumers in comparison to other service providers.
3. Installation
Setting up your new SKIVOIPLLC service is simple.
Using the following installation instructions, you can be up and running within minutes! Make
phone calls to all of your friends and start setting up all of your cool new features to make
SKIVOIPLLC even more reliable and fun to use! Before you begin please make sure you have a
working and active Internet connection.
1 . Locate your Account Details that were sent after signing up.
2 . Call our toll free customer service to activate your linsys adapter on our network.
3 . Make sure that the address where the phone will be installed is correct with our
representative.This address will be sent to 911. Please double check address before you
activate your account.
4 .You will be asked to provide the MAC address of your device, it can be found on the bottom
of your device, as shown on the picture below.
5 . After activation of your account you can begin installation of your phone adapter.
4. INSTALLATION OFYOUR PHONE ADAPTER
âȘ 1. If your computer connected to modem through router you should do following:
A. Power off your network devices, including your modem and PC.
B. Disconnect cable between modem and router, from port marked asWAN on your phone
adapter, then connect it to port INTERNET on your phone adapter.
C. Connect one end of the Ethernet network cable (included) to the ETHERNET port of the
PhoneAdapter. Connect the other end to the Ethernet port of your router.
D. Connect one end of a different Ethernet network cable to the INTERNET port of the
PhoneAdapter. Connect the other end to your cable/DSL modem.
5. Connect any regular phone to port Phone1.
âȘ E. Power on your adapter.
F. Plugin, with 30 seconds interval, all your devices: modem, phone adapter, router,
computer.
G .Check if the internet on your computer is working.
H. On your phone adapter two green lights, Power and Network, will be on.
6. After finishing all steps, leave your adapter on; activation may take up to 60 minutes.Your phone will
be ready to use when light PHONE1 is green. If you bought two lines the PHONE2 light will be green
aswell. If after 60 minutues activation was not completed reconnect power on your phone addapter.
âąThe Linksys SPA 2102 is ready when the PHONE 1 light on the top of the adapter is blue.This may
take up to 1 hour, as the adapter needs to register with SKIVOIPLLC's system. Once the Power LED,
Ethernet LED, and Line 1 LED are solid blue then your phone is ready to make and receive calls. When
the PHONE 1 light is solid confirm your Internet connection .
2. If you do not have a router, you should do following:
A. Power off your network devices, including your modem and PC.
B. Disconnect cable between modem and computer, from port marked asWAN on your phone
adapter, then connect it to port INTERNET on your phone adapter.
C. Connect one end of the Ethernet network cable (included) to the ETHERNET port of the Phone
Adapter. Connect the other end to the Ethernet port of your PC.
D. Connect one end of a different Ethernet network cable to the INTERNET port of the Phone
Adapter. Connect the other end to your cable/DSL modem.
7. Connect any regular phone to port Phone1.
E. Power on your adapter.
F. Plugin, with 30 seconds interval, all your devices: modem, phone adapter, router, computer.
G. Check if the internet on your computer is working.
H. On your phone adapter two green lights, Power and Network, will be on.
ACTIVATION
8. âȘ Setting up your new SKIVOIPLLC service is simple.
Using the following installation instructions, you can be up and running within minutes! Make phone calls to all of
your friends and start setting up all of your cool new features to make SKIVOIPLLC even more reliable and fun to
use! Before you begin please make sure you have a working and active Internet connection.
1 . Locate your Account Details that were sent after signing up.
2 . Call our toll free customer service to activate your linsys adapter on our network.
3 . Make sure that the address where the phone will be installed is correct with our representative.This address will
be sent to 911. Please double check address before you activate your account.
4 .You will be asked to provide the MAC address of your device, it can be found on the bottom of your device, as
shown on the picture below.
5 . After activation of your account you can begin installation of your phone adapter.
9. âȘ INSTALLATIONOFYOUR PHONE ADAPTER
1. If your computer connected to modem through router you should do following:
A. Power off your network devices, including your modem and PC.
B. Disconnect cable between modem and router, from port marked asWAN on your phone adapter, then
connect it to port INTERNET on your phone adapter.
C. Connect one end of the Ethernet network cable (included) to the ETHERNET port of the Phone
Adapter. Connect the other end to the Ethernet port of your router.
D. Connect one end of a different Ethernet network cable to the INTERNET port of the PhoneAdapter.
Connect the other end to your cable/DSL modem.
10. âȘ Connect any regular phone to port Phone1.
E. Power on your adapter.
F. Plugin, with 30 seconds interval, all your devices: modem, phone adapter, router, computer.
G .Check if the internet on your computer is working.
H. On your phone adapter two green lights, Power and Network, will be on.
After finishing all steps, leave your adapter on; activation may take up to 60 minutes.Your phone
will be ready to use when light PHONE1 is green. If you bought two lines the PHONE2 light will be
green aswell. If after 60 minutues activation was not completed reconnect power on your phone
addapter.
âąThe Linksys SPA 2102 is ready when the PHONE 1 light on the top of the adapter is blue.This
may take up to 1 hour, as the adapter needs to register with SKIVOIPLLC's system.Once the
Power LED, Ethernet LED, and Line 1 LED are solid blue then your phone is ready to make and
receive calls.When the PHONE 1 light is solid confirm your Internet connection .
11. âȘ . If you do not have a router, you should do following:
A. Power off your network devices, including your modem and PC.
B. Disconnect cable between modem and computer, from port marked asWAN on your phone adapter,
then connect it to port INTERNET on your phone adapter.
C. Connect one end of the Ethernet network cable (included) to the ETHERNET port of the Phone
Adapter. Connect the other end to the Ethernet port of your PC.
D. Connect one end of a different Ethernet network cable to the INTERNET port of the PhoneAdapter.
Connect the other end to your cable/DSL modem.
Connect any regular phone to port Phone1.
12. âȘ E. Power on your adapter.
F. Plugin, with 30 seconds interval, all your devices: modem, phone adapter, router, computer.
G. Check if the internet on your computer is working.
H. On your phone adapter two green lights, Power and Network, will be on.
13. Contact us
To order Call : 800-315-4730
11407 SW Amu St. Suite # L1343
Tualatin, OR 97062