1. Curriculum Vitae
J P Sharma.
Resume Highlights:.
.
.
.
PDS & SP3D Sr. Piping Designer
AutoCAD and Micro station
.
.
Address:
Jai Prakash Sharma
S/o Shri Rameshwar Prasad,
H.No.- 977, Sector-55, NIT
Faridabad-121005
Email:jpsharma2010@gmail.com
Cell No.-9953692797
Career Objective:
I have experience of 14Years 6 Months as SP3D & PDS Piping Designer, Piping Layout, System
Isometrics, Fabrication Isometrics, MTO/BOQ, Isogen, Equipment Modeling, Frame Work Plus, Report
Manager, Drawing Manager,PDS, AutoCAD, Microstation, And Smart Plant Review, To pursue a career
in a professional organization, where I can develop my skills and strength in connection with the
company’s goals and objectives through hard work and dedication.
Total Working Experience-14 Years 6Months
 Diploma In Mechanical Engineering from Institute of Advance Study In Education
 I.T.I. Draftsman Mechanical fromG I.T.I Mathura, NCVT Board Lucknow.
 SP3D(Piping Modeling), PDS(Piping & Equipment Modeling), AUTOCAD Rel-14 to 2008, Micro
Station, Naviswork Review, Naviswork Freedom and SPR Review
 Matriculation from C.B.S.E Board Delhi in1997.
 ITI Draughtsman for MECHANICAL fromG I.T.I Mathura, NCVT Board
 Intermediatefrom U.P. Board Allahabad.
Currently Working in Air Liquide India Pvt Ltd Through GR Consultants From May-2014
Project: - Currently working in NWR (North West Refinery) project in SP3D Designed,
Erected and Commissioned by Air Liquide Mohan Estate Delhi
Project: - Previously working in GASAL Air Separation Unit (ASU) project in SP3D Designed,
Erected and Commissioned by Air Liquide, Mohan Estate Delhi.
JOB RESPONSIBILITY –
 Currently working in NWR Projec-Piping modeling as per P&ID, Plot Plan Instrument Hook ups and
Preliminary Equipment Datasheet in SP3D, IFC isometric updating as per stress comments, Checkers
Comments & extract Final isometric for fabrication and GAD extraction for NWR project. GASAL project
GAD Extraction through SP3D of All Project Area wise and released for site.
 Company’s Profile Flour Daniel India Pvt. Ltd., Feb 2014 to April 2014
Fluor India is an established quality provider of engineering, procurement, construction management (EPC)
and project management services for Fluor’s energy and chemicals, power, mining, and industrial projects, and
is a key support office for Fluor facilities located in North America,Africa, the Middle East,Europe, and Asia
Pacific.
Project: - Reliance World largest Oil & refinery Expansion Project.
JOB RESPONSIBILITY –As a Piping Checker
 Equipment Checking as per Mechanical datasheet, Vendor Drawing a, updated piping commented vendor
drawing, piping layout and latest P& ID. Supervise 4-5 Designers and Trainee Engineers.
 Isometric checking as per latest P&ID, Latest PMS, Updated piping layout & Latest Piping model.
 Prepare Compressor Area Equipment layout as per latest input from piping, Instrumentation and Vendor.
Techanical& Computer Qualifications :
Academic Qualifications:

2. Company’s Profile Valdel Engineers & Constructors Pvt. Ltd.
VEC is a leading Detail Engineering Consultancy Organization catering to Oil & Gas, Refinery, Petrochemical,
Chemical sectors both in domestic and overseas markets.VEC offers Pre-bid Engineering, Detail Engineering,
Procurement Engineering, Project Management Consultancy Services, Construction and Supervision management.
Work Experience:As Sr. PDS Piping Designer & Checker From October-2008 to Feb 2014
Project: - Previously working in HYCO Hydrogen Project BPCL Kochi, this is the Air Product
Project design by Technip India Ltd.
JOB RESPONSIBILITY –
 Equipment Checking as per Mechanical datasheet, Vendor Drawing a, updated piping commented vendor
drawing, piping layout and latest P& ID. Supervise 4-5 Designers and Trainee Engineers.
 Isometric checking as per latest P&ID, Latest PMS, Updated piping layout & Latest Piping model.
 Prepare P&ID Comments for process as per latest Model including piping comments for preparing new
Rev. P&ID.
 3D Equipment Modeling of High Pressure Steam Silencer as per mechanical Data Sheet and Vendor
Drawing, Prepare Layout of Battery Limit piping area and valve arrangement of all process services.
Piping Modeling of Main pipe rack piping connect all interconnecting process area as per P&ID,
Piping Layout, Design basis, client specification and Electrical & Instruments Details.
 Plant-1 and Plant-2 flare Header layout and connect all PSV outlets with sloped flare Header,HDR
connect with main pipe rack routed up to knock out drum.
 Hydrogen and Nitrogen Metering Skid 3D modeling and prepare piping layout as per P & ID & design
basis.
 Equipment Modeling of Cooling Tower and Cooling water supply and Return Main Header routed from
cooling Tower to main Pipe rack for using as common header.
 Isometric extraction for stress analysis and issued for checking after checking issued for Construction
Project: - Previously working in Phillips 66, OLD Ocean Texas Fractionation project.
JOB RESPONSIBILITY –
 Hot Oil Distribution pump, Horizontal Storage tank checking as per Mechanical datasheet, Vendor
Drawing a, updated piping commented vendor drawing, piping layout and updated latest P& ID.
 Isometric checking as per latest P&ID, Latest PMS, Updated piping layout & Latest Piping model
 3D Equipment Modeling of Hot Oil Surge Drum as per mechanical Data Sheet and Vendor Drawing.
 3D Equipment Modeling of Hot Oil Distribution Pumps as per mechanical Data Sheet and Vendor
Drawing
 3D Equipment Modeling of Hot Oil Heater as per mechanical Data Sheet and Vendor Drawing
 Thermal oxidizer 3D modeling and prepare piping layout as per design basis and p & id.
 Prepare Nozzle orientation of surge drum,hot oil heater and Thermal Oxidizer Vendor comments as per
Mech. Data sheet,Plot plan and P&ID.
 Preparing piping study of Hot oil surge drum and Hot oil Distribution pump suction and discharge as per
plot plan and P&ID.
 3D Equipment Modeling of Fractionation column and Piping Modeling as per Plot Plan, P&ID,
Mechanical Data Sheet and Vendor Drawing.
 Prepare Nozzle Orientation of Fractionation Column and Comments Sent to Vendor.
 Iso Extraction for stress analysis, issued for approval and issued for construction.
Project: - SHELL EPFR PROJECT (Shell Refinery U.S.A)
Project Description –Flare Gas Recovery Project
JOB RESPONSIBILITY –As a PDS Piping Designer
 Fractionating Tower, Re-boiler Equipment modeling and Piping layout as per Design Basis, plot plan and
P&IDs.
 Prepare Nozzle orientation of fractionating tower as per as Plot plan, P&ID,Instrument data and
mechanical datasheet.

3.  3D Equipment Modeling Vertical Vessel, Heat Exchanger & Boiler Feed Water Pump,
 Vertical Vessel,Horizontal Drum and piping study as per P& ID.
 Plan Nozzle orientation for Vertical Vessel(Knockout drum) and Horizontal Drum
 Preparation GA Drawing in Autocad.
 Preparation of Bulk Valve MTO.
 Pipe Rack Line Sequencing & Battery Limit Concept.
 Checking of MTO with respect to piping material class
 Utility Piping as per P& ID.
 Modeled Physical pipe supports in Equipment Model.
 Checking of MTO with respect to piping material class
 Clash Check in PDS.Model
 Iso Extraction for IFA and IFC of all lines.

Project: - PRAXAIR (Hydrogen Generation Plant)
Project Description –135MM SCFD H2 SMR ST. Charles Luisiana USA
JOB RESPONSIBILITY – As a PDS Piping Designer
 3D Equipment Modeling & Hor. Dearator platform planning and piping study as per Mechanical Data
sheet/Vendor drawing and P& ID.
 Equipment Modeling of Heat Exchanger & Boiler Feed Water Pump,Flare Stack, Vertical
Vessel,Horizontal Drum as per Mechanical Data sheet/Vendor Drawing & P& ID. Prepare Piping
 layout study and piping modeling 6” and above lines as per P&ID Plot plan, Design Basis and Client
Specification for 30% Model Review
 Prepare Nozzle Orientation & Platform Cut outs of Flare Stack and Deareator (Boiler Feed Water Knock
out Drum.
 Blowdown pump suction and discharge piping layout.
 Pipe Rack Line Sequencing & Battery Limit piping as per Plot plan Design basis, Client Specification,
P&ID and coordinates with battery limit vendor.
 Dearator,Flare stack, BFW pump Piping layout and modeling as per P & ID and Equipment layout.
 Model Physical pipe supports in Equipment and piping for Clash Check in PDS.Model
 Utility Piping based on P& ID
 Iso Extraction for IFA and IFC of all lines.
Project: - Lyondell Besell and Momentum Frac-II and Frac-III to Frac-V (Revamping Project)
JOB RESPONSIBILITY –
 checking of rail model as per, updated piping commented, piping layout and updated latest P& ID.
Isometric checking as per latest P&ID, Latest PMS, latest piping layout & latest Piping model
 3D Piping Modeling of Rail CAR Loading Area as per 2D Piping Layout provided by Aura.
 Flare stack modeling and Flare line routing as per P& ID based on Equipment layout.
 Pipe Rack Line Sequencing & Battery Limit Concept.
 Vertical Ro water Tank,Blow down water tank and Pump Piping and Supporting.
 Iso Extraction for IFA and IFC of main pipe rack,Tie-in Rack,
 Project: - PetroLogistics (Polypropylene Project)
 Project Description –World Largest Reactor based Polypropylene Project-
JOB RESPONSIBILITY –
 3D Equipment Modeling & WHB (Waste Heat Boiler), Heat Exchanger,Ventury, Gas Turbine and
Turbine Silencer,Pump House, Steam Drum, Boiler, piping as per P& ID and Data Sheet.
 Study Routing of stress critical piping, Steam Turbine Piping and Gas Turbine Piping as per P & ID based
on equipment layout.
 Modeling of technological structure in PDS Equipment modeling.
 Support modeling using PDS as software for stress critical lines as per support std. and support information
provided by stress department.
 Plan layout of 3way Pipe Rack, Battery Limit Valve & Operating, Maintenance Platform Arrangement.
 Clash check in PDS model.

4.  Checking of MTO with respect to piping material class.
 Modeled Physical pipe supports in Equipment Model.
 Co-ordination with other department.
 Isometric Extraction for IFA and IFC of working area lines.
Company Profile:Doosan Engineering & Services India Pvt. Ltd. Gurgaon, Haryana
Doosan is an Engineering, Procurement and Construction Company in the power Sector Doosan is
Established Domestic and Overseas Power Project like, Thermal Power plant, Gas Fired Power Plant,
Hydro power Plant etc.
Work Experience: As PDS Piping Designer , Sep2007 To Sep2008
Project: - GLOW (650MW x 2 Power Project)
Project Description –650MW x 2 Power project twine units for Domestic Clients
JOB RESPONSIBILITY –
 3D Equipment Modeling of Boiler Feed Water Pump,Plate Heat Exchanger ,Water Storage tank
& Deareator, Vertical Vessel and platform planning and piping study as per P& ID based on
equipment layout.
 Preparation of Study Drawing of 6” and above lines and utility Lines.
 Pipe Rack piping as per Equipment layout and P & ID
 Pipe Rack Line Sequencing & Battery Limit Concept.
 Clash check in PDS model.
 Checking of MTO with respect to piping material class.
 Modeled Physical pipe supports in Equipment Model.
 Co-ordination with other department.
 Isometric Extraction for IFA and IFC of all lines.
Company Profile:Futech Consultants Pvt. Ltd. Sarita Vihar, New Delhi
Futech Consultants is a multi faceted company that provides end to end engineering services to its customers which
include concept engineering, detailed engineering, procurement assistance,project management services,
inspection and quality control and commissioning assistance. Provide consultancy fire fighting system, planned fire
fighting system for Metro station, Industrial Plants, Power plants Export industry and others etc.
Work Experience:As Autocad Designer May-2007 to 30-Sep-2007
 JOB RESPONSIBILITY –
 Preparation of plant layout and GA Drawing for firefighting system.
 Preparation of Study Drawing of 6” and above lines in Autocad.
 3D Isometric drawing for firefighting system.
 Fire Water pump house P & ID and layout drawing.
 Water Storage tank equipment drawing and Piping as per P & ID
 Locate Hydrants and Sprinklers as defined location.
 Pipe Rack Line Sequencing & Battery Limit Concept.
 Utility Piping based on P& ID
 Preparation P & ID for firefighting system.

Company Profile:MACRO Furnaces Private Limited
Macro Furnaces (P) Ltd. is a leading manufacturer, supplier and exporter of industrial furnaces, combustion
equipment, waste heat recovery systems (Recuperator) and allied accessories. MFPL manufactures a variety of
efficient industrial furnaces like fuel oil fired and electrical resistant heated, MFPL waste heat recovery system
(Recuperator), MFPL combustion equipment like burner and compact burner, blower and induced draft fans,
heating and pumping unit, gas train, hydraulic pusher and hydraulic ejector. The company designs, fabricates and
supplies various kinds of industrial furnaces on a turnkey basis to meet the requirements of various industries alike
Work Experience: As Autocad Designer from 2 April-2005 to April 2007

5.  Prepare layout and General arrangement drawing of Rolling Mills & Steel Foundries.
 Prepare Assembly and Structural Detail Drawing of Forging Furnace. Prepare burner piping layout for fuel
supply and oxygen supply. Prepare detail drawing of Miter Band for big diameter low pressure pipeline.
 Prepare location plan in layout of all type of furnace like Forging furnace,Alluminium Melting Furnace
Annealing and Normalizing treatment plants.
Work Experience: As Freelancer from 2 Sep-2000 to April 2005
Providing Freelancing Service for the company for the company as a Autocad Designer Century Crane Engineers,
Faridabad
Providing Freelancing Service for the company for the company as a Autocad Designer Jotindra Steel Tubes Ltd,
Mathura Road Faridabad
Personal Details:
Date of Birth : 19 November 1982
Martial Status : Married
Nationality : Indian
Sex : Male
Strength : Hard working, Sincere, Honest and Target Achiever
Salary Drawn :
DECLARATION:
I hereby declare that the above mentioned information’s are fully correct to the best of my knowledge.
Date:
Place: J P Sharma