1. An Introduction to
Hytetra Services, Inc.

2. What does Hytetra Services do?
Hytetra Services specializes in cleaning
hard-to-clean equipment and substances
with a proprietary foam agitation process.

3. How is Hytetra Services different?
We use proprietary tools and technology to apply a
layer of foam that breaks down the molecular bonds
of the targeted substances.
Traditional methods typically involve high water
pressure and displacing chemicals that may disperse
targeted substances, but do not break them down.

4. Advantages of Foaming
Less water usage
Foaming action increases the affectivity of any
cleaning solution
Foam is applied at low pressure, so less damage to
surfaces being cleaned
Lower environmental impact

5. Main Focus Areas for Foam Cleansing
Cooling towers and HVAC systems
Bio-hazard and bio-odor remediation
Oil spill and hydrocarbon remediation

6. Focus Areas: Cooling Towers
Cooling towers function by cascading water over metal heat
exchangers in an outdoor environment.
Problems arise as calcium and other minerals become
deposited on the metal, which decreases the efficiency of the
cooling system.
Pressure washers can be used, but they usually damage the thin
metal of the heat exchange.
Hytetra covers the mineral build-up with low pressure foam and
then gently dislodges it from the heat exchange.

7. Focus Areas: Cooling Towers
An example of a heat exchange cleaned with our foam process

8. Focus Areas: Cooling Towers
Videos of a typical cleaning project (click on each video icon)
1. Problem build up before cleaning 2. Hytetra cleaning process

9. Focus Areas: Cooling Towers
Videos of a typical cleaning project (click on each video icon)
3. Heat exchanger after Hytetra cleaning
4. Removing the grime from
the catch basin

10. Key Highlights: Cooling Towers
95% less water usage
95% smaller waste stream
No toxic chemicals
Zero damage to equipment
Less down time, extended life of the equipment

11. Focus Area: Bio-hazard
and Bio-odor Remediation
Bio-chemicals such as urea, uric acid, and ammonia can
permeate into soil, concrete, and asphalt.
Pressure washers are typically used, but this process simply
masks the problem, but does not break down the problem
chemicals.
Hytetra uses foam to apply an EPA approved, bio-remediation
enzyme which attacks the odors and renders the offending
chemicals harmless.

12. Key Highlights: Bio Remediation
70% less water usage
No toxic chemicals
No need to remove top soil
Ease of application

13. Focus Area: Oil Spill Remediation
Hytetra uses foam to apply an EPA approved, oil
remediation enzyme which breaks down oil and
hydrocarbon into water and carbon dioxide.
Foam can be applied to oil sheens on water as well as
saturated soils.
Enzymes are harmless to plants and animals.

14. Key Highlights: Oil Remediation
98% less water usage
No waste stream
No toxic chemicals
No need to remove top soil
Ease of application