2. Benefits > Cost-efficient shed material
> Hydrophobicity transfer and recovery
for the
> Semiflexible
manufacturer > Easy processing
> High tracking and erosion resistance
> No postcure
Material and Araldite® S-HCEP (Semiflexible and processing cost savings.
Hydrophobic Cycloaliphatic The system has a mix ratio
processing cost
Epoxy) Systems are suitable for of 1:1 volume which makes it
savings medium to high voltage insula- suitable for standard two-com-
tion applications offering manu- ponent meter mix equipment.
facturers substantial material
High performance Araldite® S-HCEP Systems are bicity, hydrophobicity transfer
new epoxy-based shed materi- and recovery similar to the
als for composite insulators. well-known Araldite® HCEP Sys-
They deliver intrinsic hydropho- tems.
Easy processing on > No premixing
> No vacuum preparation
standard equipment
> No degassing
> No heating
> No primer treatment
> No mold cooling
> Quick mold filling
> Low clamping forces
> No postcure
> Light and cheap equipment
> Low pump pressure
Hydrophobicity Araldite® S-HCEP Systems are bic properties after losses, e.g.
able to recover their hydropho- from electrical discharging.
recovery
Untreated sample: After plasma treatment: After 1 day: complete recovery of
hydrophobic surface hydrophilic surface hydrophobic surface
3. No primer Araldite® S-HCEP adheres well to
the glass fibre epoxy rod and to metal
required
without primer application.
Araldite ® S-HCEP Systems
Glass fibre reinforced rod made of
Araldite ® Pultrusion Systems
4. Key advantages
Araldite ® S-HCEP Systems Liquid silicone rubber
Viscosity low high
Primer treatment no yes
Flexibility semiflexible high
Hydrophobicity good very good
Tracking and erosion resistance high high
Bird attack resistance yes no
Leakage current low medium
Tear strength high low
Material cost medium high
220 kV hollow insulator made by Hübers –
with courtesy of Hübers, Germany
Composite bushing 72 kV
made by Huntsman, Switzerland –
with courtesy of Lapp, Germany
5. Track record, tests and approvals
High tracking and Araldite® S-HCEP Systems pro- Insulators made from Araldite®
vide excellent tracking and ero- S-HCEP Systems have passed
erosion resistance
sion resistance and good water the 1 000 hours salt fog test
diffusion break-down strength. according to IEC 61109 (FGH
Mannheim, Germany) and
showed extremely low leakage
current.
Araldite® S-HCEP Araldite® S-HCEP Systems used outdoor applications: KIPTS
for composite insulators have test (Koeberg Insulator Pollution
insulators passed
fully passed one of the most Test Station) in South Africa.
South Africa KIPTS stringent natural aging tests for
test and fit for use
in a coastal and
marine environment
Advancing contact angle (°)
160
Long-term stability Standard cycloaliphatic epoxies Hydrophobic
140
loose hydrophobicity after
of hydrophobicity
5 000 hours during accelerated 120
fluorescent UV and weathering 100
test whereas Araldite® S-HCEP 80
Systems keep their hydropho- 60
bicity even after extended UV 40
and weathering times. 1 000 20 Hydrophilic
standard sun hours fluorescent
0
UV correspond to 1 year in
0 5 000 10 000 15 000
nature. Exposure time (standard sun hours)
Araldite ® S-HCEP Systems
Araldite ® HCEP Systems
Standard cycloaliphatic epoxy system