The document proposes a lidar-based perimeter intrusion detection system (PIDS) with the following key points: 1. It uses lidar sensors that can scan 360 degrees and detect objects up to 300 meters away to monitor facility perimeters. 2. An integrated management platform analyzes lidar data and video surveillance to detect, track, and classify intrusions in four phases - detection, alert, intrusion, and tracking. 3. The solution is presented as more accurate, cost-effective, and weather-resistant than traditional security systems. It can identify intruders, predict intrusion paths, and automatically respond through configured workflows.

1. Proposal for Lidar Based
PIDS(Perimeter Intrusion Detection System)
Solution
MPOLE System

2. 1. Introduction
LiDAR (Light Detection And Ranging) Sensor?
It is a technology that can detect distance, direction, speed, and size of objects through 3D information by using values
returned from a target by a remote-detection laser. This can scan of 360° environment and detect range of
measurements up to 300m and it is a very precise sensor used as core technology for self-driving cars.
Channel 16
Detection Range 150m
Distance Accuracy ±3 cm
Scan Rate/Horizontal 5Hz、10Hz、20Hz
VFOD ±15°
HFOV 360°
Data receving speed
Max: 320K points per
second
Weight 1500g
Motion detection intrusion position
measurement
150m
Person or car speed measurement
Object size
measurement
150m

3. Precision-detectable Lidar technology enables separate space monitoring, and low-cost & high-efficiency
perimeter intrusion detection system can be provided by differentiated Lidar technology.
• Detection people MAP
display
• Direction, position,
speed check
• Real-time monitoring
• Alert event video pop-up and
auto release
• Alert event temporary display
• Audio broadcasting of access
not allowed area
• Direction, position, speed
check
• Real-time monitoring
• Intrusion area video pop-up
• Intrusion area E-Map
display
• Audio broadcasting & siren
interworking
• Intrusion notification into
agent (SMS, Call etc.)
Tracking Monitor
(Phase 4)
• Tracking of intrusion path and
position
• Expecting intrusion path video
pop-up
• Providing group type video
monitoring
• Situation management manual
pop-up
• History management menu
pop-up
Detection event
(Phase 1)
Alert event
(Phase 2)
Intrusion event
(Phase 3)
1 2 3 4
2. Solution Overview

4. 1. 제품 설명
Advanced
PIDS
Solution
360°
Lidar Scan
Video-based
Tracking on
Event
• 360° scan and detection for
facility area
(Measurement range Max. 300m)
• Interworking with real-time
video surveillance technology
actual event position check
• Advanced PIDS solution
installment based on IMP
Platform
Low-cost & High-efficiency Lidar sensor and
video surveillance technology based
Advanced PIDS Solution Installment
2. Solution Overview
[LiDAR Tracking Sample] [IMP Event E-map Display Sample]

5. 2. Solution Overview
• 360°scan for a wider range of detection than
traditional perimeter protection system
• Pursuit of malfunction 0%!! Providing 99% of
detection precision
• Cost savings over traditional sensors deployment
• Rain / Snow/ Night etc. Not dependent on
weather conditions
IMP
Integrated Management Platform
Advantages
• E-Map type event video pop-up based intuitive
management
• People or vehicles counting and real-time movement path
monitoring
• Providing position tracking feature & video interworking
• Phase 4 (Detection, Alert, Intrusion, Tracking) based
surveillance system installment
• Vehicle speed detection based video capture feature
Lidar based PIDS solution is new concept that analyzes the movement patterns of people and objects, identifies,
predicts, and controls the path of intrusion and escape path.
※ About 4km(1,200m X 900m) Area : 14 EA
- Shall be adjusted depending on site situation
900m
1,200m

6. 3. Service Scenario
Lidar based PIDS(Perimeter Intrusion Detection System) Solution
Interworking with IMP Lidar based PIDS solution can provide fast and accurate intrusion detection. And it can support
various service scenarios (Phase 1 ~ 4) for the intrusion of personnel and also provide work-flow for fast response and
post-processing.
Scenario Automation Through Work-Flow based Rule
[Lidar based PIDS solution and video surveillance service]
Intruder detection area E-Map Highlight Camera Pop-up on expected Path & Notification
ALARM
2 3
45
MMS
Security Agent
can check event
&
video
Intruder detection through Lidar sensor
1

7. 4. Applying Market
Airport Port
Power Plant Factory
Lidar based PIDS solution can be applicable to major facilities or areas requiring security such as Airport, Port,
Power Plant, Factory etc..

8. Appendix

9. Appendix. IMP Management System Diagram
VMS Sentio
IMP(Integrated Management Platform)
IMP Server IMP Client
L2 Switch
L2 Switch
L2 Switch
L2 Switch
L2 Switch
L2 Switch
L3 Core
Recording
Server
Monitoring
Client
Perimeter Intrusion
Detection
PIR Detector
thermometer &
hygrometer
Smoke & Flame
Data Receiver
Alarm Interface Unit
e-Map Monitoring Video Monitoring
Inspection & Classification MEC(Multi Event Control)
※ Integration of existing solutions can be possible, if API or SDK is provided.
Gas & Chemical
Person Tracking &
Counting
RFID,BLE,UWB
Gesture Recognition

10. Thank you
Contact : 02-6929-0778 newbiz@mpole.co.kr
#606, DMC R&D Center, 37, Maebongsan-ro, Mapo-gu, Seoul, Korea