1. Page 1 of 2
Trainer & Assessor Profile
Section1 – PersonalDetails:
First Name Garry
Last Name Ronan
Department Minda Gaya Consultancy T/A Gazlan Safety and Training
Position ☒Trainer/Assessor ☐Trainer ☐Assessor ☐Under Supervision
Employment status ☐Full time ☐Part time ☐Casual ☒Co-provider
Contact Details:
Work Telephone 08 99212157
Mobile 0428642157
Email gazlan7@bigpond.com
Training Product/s Delivered
Code Title
CPCCLDG3001A Licence to Perform Dogging
CPCCLRG3001A Licence to Perform Rigging (Basic)
CPCCLRG3002A Licence to Perform Rigging (Intermediate)
CPCCLRG4001A Licence to Perform Rigging (Advanced)
TLILIC1208A Licence to Operate a Vehicle Loading Crane (Capacity ten metre/tonnes and above)
TLILIC608A Licence to Operate a Non Slewing Mobile Crane (Greater than 3 tonne capacity)
TLILIC808A Licence to Operate a Slewing Mobile Crane (Up to 20 tonnes)
TLILIC908A Licence to Operate a Slewing Mobile Crane (Up to 60 tonnes)
TLILIC1008A Licence to Operate a Slewing Mobile Crane (Up to 100 tonnes)
CPCCCM1016A Identify Requirements for Safe Tilt Up Work
MNMG237A Work Safely at Heights
RIIWHS202D Enter and Work in Confined Spaces
RIIWHS204D Work Safely at Heights
RIIMP0304A Conduct Wheeled Loader Operations
RIIMP0317A Conduct Roller Operations
RIIMP0318A Conduct Skid Steer Loader Operations
RIIMP0311A Conduct Haul Truck Operations
RIIMP0324A Conduct Grader Operations
RIIMP0326A Conduct Water Cart Operations
RIIMP0308A Operate a Bulldozer
RIIHAN309D Conduct Telescopic Materials Handler Operations
RIIWHS302D Implement Traffic Management Plans
2. Page 2
RIIWHS205D Control Traffic with a Stop/Slow Bat
TLIC2507B Operate a Four Wheel Drive Vehicle
RIIVEH305A Operate and Maintain a Four Wheel Drive Vehicle
RIIMP0301A Conduct Hydraulic Excavator Operations
FPICOT2206B Cross Cut Materials with a Hand Held Chainsaw
MNMG237A 2 Day Mine Surface Induction
SIR07/SIT07 Aussie Host
VU20006 Increase Personal Effectiveness
VU0008 Develop Action Plan for Career Planning
VU0007 Prepare for Employment
VU0009 Participate in Job Seeking Activities
TLIE1003A Participate in Basic Workplace Communications
BSBWHS201A Contribute to Health Safety of Self and Others
BSBITU101A Operate a Personal Computer
Short Courses
Angle Grinder Safety Awareness Training
Hand Held Concrete Cutting Saw
Pendant Gantry Crane
Aluminium Mobile Scaffolding
Job Safety Analysis JSA/Job Hazard Assessment JHA
Australian
Standards
AS2550.1-2011
Inspection of Rigging Equipment – Cranes, Hoists and Winches. (Powered & Hand
Operated) AS2550.1-2011
Australian
Standards
AS2550.1-2011
Inspection of Lifting Gear - Lifting Devices; Section 15 - Maintenance, Inspection
and Repair. AS2550.1-2011
Based on AS/NZS
1891.4:2009
Equipment/Inspection and Maintenance (Confined Space & Rescue) Industrial Fall Arrest
Systems and Devices - AS/NZS 1891.4:2009 Selection Use and Maintenance.
WHS/OS&H Legislation, Worksafe & Mines Safety and Inspection (Acts and Regulations)
Ergonomics and Manual Handling
Chemicals and Atmospheric Contaminants
Fire Fighting and Fire Prevention
Chain Slings-Grade T Part 2: Care and Use – AS 3775.2-2004
Wire Ropes & FSWR Slings – AS 1666.2-2009 Shackles – AS 2741-2002
Flat Synthetic – Webbing Slings – AS 1353.2-1997 Synthetic Round Slings – AS 4497.2-
1997 Wedge Sockets – AS 2740-2001 Tilt Up Concrete Constructions (Face
and Edge Lifters) – AS 3850-2003