Cartucce filtranti Pall Red1000 in contenitori Hydac! Vita utile più estesa => minori tempi di manutenzione => minori stand by => minori costi ed incremento di produttività Energy Cost Saving! deltaP a filtro pulito consistentemente più basso rispetto ai prodotti Hydac

1. Pall Red1000 filter elements allow users of Hydac filters to
protect their systems with Pall high performance filtration
without having to replace existing filter housings.
Switching to Pall is simple
Pall Red1000 filter elements fit directly into Hydac filter
housings without the need for adaptors, in both low and
high collapse pressure designs. For element styles using
a bypass valve, either reusable or element integral bypass
valve options are available.
Upgrade to Pall Filtration
Pall Red1000 filter users realize many benefits:
• Advanced protection of critical system components
• Effective cleanliness control in real operating conditions
• Consistently clean fluid throughout filter service life
• Extended filter element change intervals
• Competitive pricing
Pall Red1000 filter elements for use
in Hydac* Filter Housings
Data Sheet M&ERED1000ENa
Pall Red1000 Series upgrade filter elements for Hydac Housings
A wide range of filter element configurations
Targeted for applications where enhanced filtration will
extend component life, reduce downtime, and increase
productivity, Red1000 elements series are available for a
wide range of Hydac filter housings. With multiple filter
grades and configurations, Pall Red1000 filter elements are
the smart choice for your system protection requirements.
Advanced protection by Design
• Proven media technology
- Small diameter, inert, inorganic fibers bonded for a
consistent pore structure
- Fixed pore construction for precise particle control
- Tapered pore structure for optimum dirt holding
capacity
• High strength pack for support and fatigue resistance
• Compatibility with a wide range of hydraulic fluids and
operating temperatures
Contact Pall sales representatives for the complete list of
Red1000 upgrade elements available for Hydac housings
installed in your hydraulic or lubricating applications. Red1000
elements range from 2” to 36” length, suitable for flows up to
2,600 l/min (690 USgpm).
Red1000
Medium Grade
Low Collapse Pressure
KP
KN
KS
KT
High Collapse Pressure
DP
DN
DS
DT
µm(c) Rating for ß value
ß1000 per ISO 16889
5
7
12
22
5
7
10
15
Advanced protection by Performance

2. Specifications
Note
Filter Media: Inert inorganic fibres, bonded with epoxy resins.
Filter Hardware: Corrosion protected carbon steel end caps and central core.
Fluid Compatibility: Compatible with mineral and petroleum oils, water glycols, water-oil
emulsions and those synthetic fluids rated for use with fluorocarbon seals.
Operating
Temperature Range: -43°C to 107°C (-45°F to 225°F) with nitrile seals
-29°C to 120°C (-20°F to 250°F) with fluorocarbon seals
Collapse Rating: 10 bar (145 psid) minimum differential pressure for low strength elements.
210 bar (3045 psid) minimum differential pressure for high strength
elements.
Element performance validated per ISO 16889, ISO 2941, ISO 2943,
ISO 3724, ISO 2942, ISO 3968.
Red1000 Filter Elements Contribute to Energy Cost Savings
Red1000 filter elements exhibit much lower clean DP values than competitors, leading to significantly lower energy
consumption throughout the filter element’s service life. This is due to the lower amount of energy required to drive the fluid
flow through the filter element.
Filter Element Differential Pressure Profile (example)
FilterElementP
Filter Element Changeout
P Indicator Actuates
Service Hours T
Pall Machinery and Equipment
25 Harbor Park Drive
Port Washington, NY 11050
+1 516 484 3600 telephone
+1 800 289 7255 toll free US
Portsmouth - UK
+44 (0)23 9233 8000 telephone
+44 (0)23 9233 8811 fax
industrialeu@pall.com
Visit us on the Web at www.pall.com
Pall Corporation has offices and plants throughout the world. For Pall representatives
in your area, please go to www.pall.com/contact
Because of technological developments related to the products, systems, and/or
services described herein, the data and procedures are subject to change without
notice. Please consult your Pall representative or visit www.pall.com to verify that
this information remains valid.
© Copyright 2012, Pall Corporation. Pall and are trademarks of Pall Corporation.
*Hydac is a registered trademark of Hydac Technologies GmbH
® indicates a trademark registered in the USA. ENABLING A GREENER FUTURE and
Filtration. Separation. Solution.SM are service marks of Pall Corporation.
MERED1000ENa Printed in the UK. January 2013
Hydac filter element
Pall Red1000 filter element
Area under P profile is a measure of the power [KW] required to “push” a fluid through the filter element, at a given flow
rate. A higher initial clean P will result in a substantial increase in energy consumption over the filter element’s service life.
The energy used over the service life of the filter element is determined as power multiplied by service hours [kWh]. This
energy can also be expressed in CO2 equivalent emissions (CO2e [g/kWh])