9. Step 4 - Remove Battery Connection:
Use the edge of a spudger to pry the Battery connector
upwards from its socket on the logic board.
10. It is useful to pry upward on both short sides of the
connector to "walk" it out of its socket. Be careful with the
corners of the connectors, they can be easily broken off.
11. Step 4:
Bend the battery cable slightly away from its socket on
the logic board so it does not accidentally connect itself
while you work.
12. Step 5 – Remove screw of the battery:
Remove two screws of the battery to make battery
free from Surface:
13. Step 6 – Remove The warning label of battery:
1. Carefully peel the battery warning label off the upper
case between the battery and the optical drive.
2. But do not remove the label from the battery.
14. Step 7 – Remove battery from laptop
Use the attached plastic pull tab to remove the battery
from the Upper case.
15. To reassemble your
device, follow these
instructions in reverse
order.
108 Deepdale Road
Preston, Lancashire, PR1
5AR, united kingdom