The document presents an overview of a water treatment plant. It includes a diagram labeling the various components of the treatment process from intake to distribution, including pumps, tanks, filters, and chlorination. It also shows the connections between the plant, intake, control room, and distribution system and how data is transmitted between them for monitoring and control.

1. Presentation
On
Water Treatment Plant
By Er. Anoop Kumar

2. M
INTAKE
L
S
L
T
Agitator
M
M M
PLC
M M
L
S
ESR
M
M
SEA WATER
To Pump
Sump UNA
Pump
Sump Ghogla

3. M
M M
M
WTP
From Sump Ghogla
Pump Aeration Tank
M
M
Flash Mixer
M
Alum
Dosing
Tank
TCL
Dosing
Tank
Air Blower
E
M
FIT
M
Sand
Gravel
M
M
M
E
M
M
E
M
M
PG PG
Rapid Sand Filter Chlorination Tank Gas Chlorinator
From Recirculation Sump
To Pure Water Tank
From Raw Water Pump
To Sludge Thickener
Primary Clarifier
PLC
L
T

4. Pump
Sludge Thickener
M LS
M
M M
M
Filter Wash Water Pump
M
Filter Wash Water Sump
M
M M
MM
To primary Clarifier To Aeration Tank
Recirculation Sump
From Rapid Sand Filter
From Primary Clarifier
M
M M
M
Booster Pump
M
Pure Water Tank
LS
LS
LS
Pure Water
To Disposal
From Chlorination Tank
PLC
WTP Cont….

5. IPS
IPS
Intake
CWPS at WTPWTP PHED Office,
ESR
ESR
ESR
ESR
Ranpur
ESR
ESR
ESR
ESR
ESR
ESRESR
ESR
ESR
ESR
ESR
ESR
Overview of the
Water Distribution
ESR

6. Description Of water Distribution
• Dark black line is mild steel (MS) pipe.
• Dotted lines are for transmitting data/pulse/information to local
PLC(IPS,INTAKE,WTP,WTP ).
• Red dotted line is for transmitting data to PHED Head office where
PLC & SCADA is Available for showing all process of water
treatment plant.
NOTE:- You can Combine Slide 1,2,3 on Paper
For better understanding.