For more classes visit www.snaptutorial.com Case Study: The Ethical Hacker Due Week 3 and worth 70 points Imagine for a moment that you are a hacker; an ethical one. You are called upon by law enforcement based on

1. CIS 534 Week 3 Case Study The Ethical
Hacker
For more classes visit
www.snaptutorial.com
Case Study: The Ethical Hacker
Due Week 3 and worth 70 points
Imagine for a moment that you are a hacker; an ethical one. You are
called upon by law enforcement based on your expertise to hack into
a network of a business known to be launching crimes against
humanity as its primary mission for operation and capital gain.
Assume you are not to be concerned with any politics of the job and
your actions are legal and ethically justified. This nefarious business
takes its own security seriously and therefore has implemented several
forms of network security such as firewalls, Web proxies for its Web
gateways, and VPNs for remote users. You also know that this
business exists much like any normal corporation, renting several
floors of office space to accommodate between 100-200 employees.
Also imagine that the business’s entire network topology is located in
that same location. Your goal is to infiltrate the security enough to
find evidence included in the local MSQL database. You need to
remain anonymous and operate within the reasonable parameters of
the law.
Write a four to five (4-5) page paper in which you:
1. Explain your method of attack and operation within reasonable
parameters of the law.
2. Discuss specific malware, social engineer, or any other type of
attacks you would deploy to achieve your desired goals.
3. Assess the hurdles you expect and how you plan to overcome
them.

2. 4. Determine how you would remain anonymous without blowing
your cover.
5. Use at least three (3) quality resources in this
assignment.Note: Wikipedia and similar Websites do not
qualify as quality resources.
Your assignment must follow these formatting requirements:
 Be typed, double spaced, using Times New Roman font (size
12), with one-inch margins on all sides; citations and references
must follow APA or school-specific format. Check with your
professor for any additional instructions.
 Include a cover page containing the title of the assignment, the
student’s name, the professor’s name, the course title, and the
date. The cover page and the reference page are not included in
the required assignment page length.
The specific course learning outcomes associated with this
assignment are:
 Explain the essentials of Transmission Control Protocol /
Internet Protocol (TCP / IP) behavior and applications used in IP
networking.
 Explain the concepts of network security and associated ethical
issues in addressing exploits.
 Use technology and information resources to research issues in
network security design.
Write clearly and concisely about Advanced Network Security Design
topics using proper writing mechanics and technical style
conventions.
*******************************************************

CIS 534 Week 4 Assignment 1 Defense in
Depth

3. For more classes visit
www.snaptutorial.com
Assignment 1: Defense in Depth
Due Week 4 and worth 70 points
Oftentimes, the process of implementing security opens one’s eyes to
other forms of security they hadn’t thought of previously. Well, in this
assignment you should experience just that. This assignment focuses
on a model of implementing security in layers which in many cases
requires a network that is designed accordingly. In this assignment,
you are to design a network to incorporate the following:
Corporate Site (Chicago)
 All servers exist here (Web server, file server, print server, mail
server, ftp server)
 Connection to the Internet (50mbps)
 300 employees who only need access to local corporate
resources and the Internet
1 Remote Site (8 miles away)
 20 employees who need access to all resources at corporate plus
the Internet
 Connection to the Internet (3mbps)
Write a four to five (4-5) page paper in which you:
1. Using Microsoft Visio or its open source alternative, design a
network diagram, particularly with defense in depth in mind
which depicts:
1. All network devices used (routers, switches, hubs,
firewalls, VPNs, proxies, and / or others)
2. The interconnections between network devices
3. The end user (client) devices (desktops, laptops)

4. 4. The Internet cloud, generically, to represent your
network’s interface to the Internet
Note: The graphically depicted solution is not included in the required
page length.
1. Describe the flow of data through your network, and explain
how your network design provides multiple layers of security.
2. Use at least three (3) quality resources in this
assignment.Note: Wikipedia and similar Websites do not
qualify as quality resources.
Your assignment must follow these formatting requirements:
 Be typed, double spaced, using Times New Roman font (size
12), with one-inch margins on all sides; citations and references
must follow APA or school-specific format. Check with your
professor for any additional instructions.
 Include a cover page containing the title of the assignment, the
student’s name, the professor’s name, the course title, and the
date. The cover page and the reference page are not included in
the required assignment page length.
 Include charts or diagrams created in Visio or an equivalent
such as Dia. The completed diagrams / charts must be imported
into the Word document before the paper is submitted.
The specific course learning outcomes associated with this
assignment are:
 Explain the essentials of Transmission Control Protocol /
Internet Protocol (TCP / IP) behavior and applications used in IP
networking.
 Identify network security tools and discuss techniques for
network protection.
 Use technology and information resources to research issues in
network security design.
Write clearly and concisely about Advanced Network Security Design
topics using proper writing mechanics and technical style
conventions.

5. *******************************************************

CIS 534 Week 8 Assignment 2 Mister Network
Engineer
For more classes visit
www.snaptutorial.com
Assignment 2: Mister Network Engineer
Due Week 8 and worth 70 points
Using the network diagram below, your task is to incorporate the
devices on the lower right into the diagram to create a secure
corporate network. The devices you need to incorporate into the
network diagram include: Web server, ftp server, vulnerability
scanner, anti-virus server (client-based / server-based), Web proxy,
intrusion detection system (IDS), and authentication server.
Note: All client-based / server-based devices work where a client is
installed on a workstation, which has bidirectional communication
with a corresponding server.
Write a four to five (4-5) page paper in which you:
1. Determine which devices you will use for both the current
network diagram infrastructure consisting of firewalls, routers,
and workstations as well as the device you need to incorporate.
Include the following for each:
1. Make or vendor’s name (e.g., Microsoft, Redhat, Cisco,
Juniper, Netgear, 3Com, etc.)
2. Model (e.g., Windows 7, ASA 5500, Cisco 3500, Squid,
etc.)

6. 3. IP address assigned to all devices
2. Establish the configuration for each device in which you:
1. Research each of the devices you chose and provide a basic
configuration you would use in your network.
2. Use IP addresses to describe your configuration.
3. Explain the impact that each of your configurations has on the
security of the entire network.
4. Highlight at least five (5) security features for each device,
including devices in network diagram.
1. VPN sessions (from laptop) are only allowed to access the
desktops in the IT department by IT department employees.
2. All VPN connections from the Internet cloud into the corporate
network terminate at the VPN server.
3. Users from Engineering and Finance and Accounting CANNOT
communicate.
4. Vulnerability scans occur daily in which all desktops are
scanned at least once per day.
5. Using Microsoft Visio or its open source alternative to create a
final network diagram that incorporates all devices into the
existing network and ensures the following:
6. Use at least three (3) quality resources in this
assignment.Note: Wikipedia and similar Websites do not
qualify as quality resources.
Your assignment must follow these formatting requirements:
 Be typed, double spaced, using Times New Roman font (size
12), with one-inch margins on all sides; citations and references
must follow APA or school-specific format. Check with your
professor for any additional instructions.
 Include a cover page containing the title of the assignment, the
student’s name, the professor’s name, the course title, and the
date. The cover page and the reference page are not included in
the required assignment page length.
 Include charts or diagrams created in Visio or an equivalent
such as Dia. The completed diagrams / charts must be imported
into the Word document before the paper is submitted.

7. The specific course learning outcomes associated with this
assignment are:
 Design a secure network to address a business problem.
 Use technology and information resources to research issues in
network security design.
 Write clearly and concisely about Advanced Network Security
Design topics using proper writing mechanics and technical
style conventions.


 *******************************************************
CIS 534 Week 10 Term Paper Project:
Designing a Secure Network
For more classes visit
www.snaptutorial.com
Term Paper Project: Designing a Secure Network
Due Week 10 and worth 190 points
This term paper involves putting together the various concepts learned
throughout this course. You are tasked with designing the most secure
network possible, keeping in mind your goal of supporting three (3)
IT services: email, file transfer (centralized), and VPN. Your first step
is to design a single network capable of supporting there three (3)
different services. Once you have fully designed your network, you
will need to provide three (3) workflow diagrams explaining how
your designed network handles the three (3) different transactions.
The first is an internal user sending an email using his / her corporate
email address to a user on the Yahoo domain with an arbitrary address
of user534@yahoo.com. The second workflow diagram should show

8. a user initiating an FTP session from inside your network to the
arbitrary site of ftp.netneering.com. The third workflow is an
externally located employee initiating a VPN session to corporate in
order to access files on the Windows desktop computer, DT-Corp534-
HellenS, at work.
Write a ten to fifteen (10-15) page paper in which you complete the
following three (3) Parts. Note: Please use the following page
breakdown to complete your assignment:
 Overall network diagram: One (1) page
 Datapath diagrams: Three (3) pages (one for each diagram)
 Write-up: six to ten (6-10) pages
Part 1
 Using Microsoft Visio or its open source alternative, create a
diagram showing the overall network you’ve designed from the
user or endpoint device to the Internet cloud, and everything in
between, in which you:
o Authentication server (i.e. Microsoft Active Directory)
o Routers
o Switches (and / or hubs)
o Local users
o Remote users
o Workstations
o Files share (i.e. CIFS)
o Mail server
o Web servers (both internal and external)
o Firewalls
o Internet cloud
o Web proxy
o Email proxy
o FTP server (for internal-to-external transport)
 Explain each network device’s function and your specific
configuration of each networking device.
 Design and label the bandwidth availability or capacity for each
wired connection.
 Follow the access, core, distribution layer model.
 Include at a minimum:
Part 2

9.  Using Microsoft Visio or its open source alternative, create a
Datapath Diagram for the following scenario:
Local user sends email to a Yahoo recipient. Local (corporate) user
having email address jonny.hill@Corp534.com sends an email to
user534@yahoo.com.
1. Document and label the diagram showing protocols and path of
the data flow as data traverses through your network from
source to destination.
2. Include path lines with arrows showing directions and layer 1, 2,
3, 4, 5, 6, and 7 (OSI) protocols that are used for each flow.
3. Show user authentication when necessary.
4. Using Microsoft Visio or its open source alternative, create a
Datapath Diagram for the following scenario:
Local user, Jonny Hill, transfers file using ftp through the Internet to
another company’s site (ftp.netneering.com). He has to access the
secure shell using his active directory credentials to authenticate to
the ftp server (linux running Redhat) on the DMZ. He needs to
transfer files from his desktop across the Internet
toftp.netneering.com.
1. Document and label the diagram showing protocols and path of
the data flow as data traverses through your network from
source to destination.
2. Include path lines with arrows showing directions and layer 1, 2,
3, 4, 5, 6, and 7 (OSI) protocols that are used for each flow.
3. Show user authentication when necessary.
4. Using Microsoft Visio or its open source alternative, create a
Datapath Diagram for the following scenario:
Remote user, Hellen Stover, connects via VPN from home through
the Internet to her corporate desktop, DT-Corp534-HellenS. Hellen
uses a browser to initiate her VPN connection. By browsing
tohttps://VPNaccess.corp534.com, she arrives at a login page where
she needs to authenticate using her Active Directory credentials
before the VPN tunnel is built.
1. Document and label the diagram showing protocols and path of
the data flow as data traverses through your network from
source to destination.

10. 2. Include path lines with arrows showing directions and layer 1, 2,
3, 4, 5, 6, and 7 (OSI) protocols that are used for each flow.
3. Show user authentication when necessary.
4. Explain how your overall design protects the organization from
both inside and outside attacks. Give examples.
5. Explain how your layered design compensates for possible
device failures or breaches in network security.
6. Determine whether any possible bottlenecks exist in your
design.
7. Explain how to make the file transfer process more secure.
Part 3
1. Use at least three (3) quality resources in this
assignment.Note: Wikipedia and similar Websites do not
qualify as quality resources.
Your assignment must follow these formatting requirements:
 Be typed, double spaced, using Times New Roman font (size
12), with one-inch margins on all sides; citations and references
must follow APA or school-specific format. Check with your
professor for any additional instructions.
 Include a cover page containing the title of the assignment, the
student’s name, the professor’s name, the course title, and the
date. The cover page and the reference page are not included in
the required assignment page length.
 Include charts or diagrams created in Visio or an equivalent
such as Dia. The completed diagrams / charts must be imported
into the Word document before the paper is submitted.
The specific course learning outcomes associated with this
assignment are:
 Explain the essentials of Transmission Control Protocol /
Internet Protocol (TCP / IP) behavior and applications used in IP
networking.
 Identify network security tools and discuss techniques for
network protection
 Describe the foundational concepts of VPNs.
 Design a secure network to address a business problem.
 Use technology and information resources to research issues in
network security design.

11.  Write clearly and concisely about Advanced Network Security
Design topics using proper writing mechanics and technical
style conventions.
*******************************************************