1. MY CV DAHALAN
PERSONAL DETAILS
FULL NAME : DAHALAN BIN OMAR
NATIONALITY : MALAYSIAN
DATE OF BIRTH : 31st JANUARY1959
MARITAL STATUS : SINGLE
ADDRESS : 198 JALAN RAJA SYED SAFFI,01000 KANGAR,PERLIS,MALAYSIA
MOBILE PHONE : +60 0195152363
GMAIL : bluediamond.bd33@gmail.com
PROFILE
My carrer has led me to specialiseincreasingly in the Technical Fields,SalesMarketingCoordinator and
Estimator ,Project Managements and Maintenance in Shiprepairer and Shipbuildings,Logistic Managements
and the managements of complex multicultural projectand their staff atthe international level.
I have experiance in Quality Managements System,Enviromenetal Managements System,Ocupational Healty
and Safety Managements System and Information Security Managements System accordingto Iso Standard
9001,14001,18001 and 27001.
SKILL BASE
 Proven Leaderships * Top and Overhaul Marines Engines
 Budgets and cost Control * Overhaul Reduction Gears
 Sales and Marketing Strategy *Hydraulic,Pneuamatic
 Planningand schedule *Main Switch Board,DB and SDB
 Internet : Word,Excel,Publishingand Windows *Project Management Coordinator
 Clean from any drugs *Logistic Coordinator
 Clean Drivinglicense *Maintenance Ships/Plants/Hotel
PROFESSIONAL CARRER
Apperanticeships atDestination Marines Services Sdn Bhd.
1stJanuary 1977 to 31stDecember 1978
 Carried out Top and Major Overhaul of Marines Engines (internal combustion engines) as per Original
Engineering Manufacturer as directs by top level.
 Carried out Overhaul of Marines Reduction Gears as per Original EngineeringManufacturer as directs
by top level.
 Carried out workshop bench of Marines Engines and Reduction Gears,reinstall on board and carried
out onboard test,harbour acceptence trials and sea acceptence trials.
 Carried out overhaul various typeof Marines valves,Oil and PetroleumValves includeof seat
skimming,replaceof steering shaft,replaceof brass ringseats and steering.
 Carried out Pipingsystem functional testto rectified leakagesystem.

2.  Carried out maintenance 3phaseand 1phaseof AC system shortage/problems of Main Swich
Board,Distribution Board and Sub Distribution Board includingrerun of wiring.
 Carried out Arc welding,Tig weldingand Mig weldingin caseof emergency needed.
Maintenance Fitters at Destination Marines Services Sdn Bhd.
1stJanuary 1979 to 31stDecember 1983
 Carried out Top and Major Overhaul of Marines Engines (internal combustion engines) as per Original
Engineering Manucfacturer as directs by top level.
 Carried out overhaul Marines Reduction Gears as per Original EngineeringManufacturer as directs by
top level.
 Carried out workshop bench test,re install on board and carried outonboard test,harbour acceptence
trials and sea acceptencetrials.
 Carried out overhaul various typeof Marines Valves,Oil and Petroleum Valves includeseat
skimming,replaceof steering shaft,replaceof bras ringseatand steering.
 Carried out Pipingsystem functional testto rectified leakagesystem.
 Carried out maintenance of 3phaseand 1phaseAC system shortage/problem Main Switch
Board,Distribution Board and sub Distribution Board.
 Carried out Arc weld,Tig weld and Mig Weld in caseof emergency needed.
Maintenance Fitters at Kejuruteraan Kapal Masai Sdn Bhd.
1stJanuary 1984 to 31stDecember 1986
 Carried out Top and Major overhaul Marines Engines (internal combustion engines) as per original
Engineering Manufacturer as directby top level.
 Carried out Overhaul of Marines Reduction Gears as per original engineeringmanufacturer as directs
by top level.
 Carried out workshop bench test,re installation on board and carried outonboard test,harbour
acceptence trials and sea acceptencetrials.
 Carried out overhaul various ypeof Marines Valves,Oil and Petroleumvalves includeof seat
skiming,replaceof steering shaft,replaceof brass ringseatand steering.
 Carried out Pipingsystem functional testto rectified leakagesystem.
 Carried out Arc weld,Tig and Mig weld in caseof emergency needed.
Maintenance Fitters Supervisor at Kejuruteraan Kapal Masai Sdn Bhd.
1stJanuary 1987 to 31stDecember 1996
 Manage maintenance fitters section in works of Top and Major overhaul of Marines Engines and
Reduction Gears accordingto Original EngineeringManufacturer as directby top level.
 Manage all spares parts requestprocedure,receiving,outstanding stocks in hand and follows up to
manufacturer and supplier.
 Monitor standard and procedure in fittingand comissioning of MarineEngines and Reduction Gears as
per Workshop manual instruction by manufacturer and conduct workshop bench test.
 Manage and monitor re installation to their position of engines and reduction gears to onboard
includefittingand comissioningof system.
 Manage Electrical Section in connection and disconnectof AC/DC wiringsystemin ways to onboard
test.
 Checks all survey reported submitby all section,parts and equipments replace, review Main Scope of
works and Additional Scopeof Works and submitall detailsto claimdepartment.
 Coordinateday to day progress works,Works Progress Scheduleand Completion works Schedule and
informtop level.

3. Sales,MarketingCoordinator And Estimator at Kejuruteraan Kapal Masai Sdn Bhd.
1stJanuary 1997 to 31stDecember 2003
 Sales Coordinator
 Prepare temporary invoiceand refer to all section survey reports,purchaseinvoice,purchase
order,Main Scope of Works,Additional Scopeof works and tariff.
 Submit temporary to owner and operator for approval,negotiatefor final amounts and submitfinal
invoicefor claimas per negotation agreed by both parties.
 To do correction on final invoiceif mistakefound, submit Credit and Debits Note to account
department and to informowner and operator the status of amount.
 Marketing Coordinator
 Meeting with clients and offer Company Business,Typeof services and Expertise in works of
Shipbuilding,shiprepair,refurbishments works,maintenanceand contract .
 Meeting on Tender/Contract offer by clients,preparefor contractdocuments,contractagreements,rules
and regulations of contracts offer and liase to classification bodies for approval.
 Joints survey of works for comfirmation,preparefor Main Scopeof works,Additional Scopeof works and
submit and meeting with owner and operator for approval.
 Estimator
 Carried outbudgets,costs controls,break down details costs,duaration to completion of works and refer
to tariff.
 Metting and to table all estimation works to top level for approval.
 To submit Tender/Contract offer by owner and operator for approval.
 Coordinateto all section and departments in budgets,costs controls to increasecompany profitmargin
in every projects.
 To table unexpected costs to decrease company profit loss.
Maintenance Fitters at Imej Klasik Sdn Bhd (New York Hotel – 3 Star Hotel)
1st January 2004 to 31st December 2008.
 Carried out maintenance/overhaul A/cond system CoolingTower,cleaningincomingand outgoingfresh
water system,inspect/maintenancepipingsysytem,inspect/maintenanceall control valves and conduct
system functional test.
 Carried out maintenance/overhaul 3phase and 1phase Electrical driven rotation motors,inspect
rotor,fields coil,replace front and rear bearings,check incoming and outgoing AC current system,re
install to position and conduct load test.
 Carried out maintenance/overhaul 3phase and 1phase HVAC,AHU and FCU,cleaning incoming and
outgoing sistem,chemical clean Evaporator,adjust driven belt,cleaning inner and outer room and
conduct load test.
 Carried out maintenance/overhaul 3phase and 1phase AC system shortage/problem of Main switch
Board,distribution Board and Sub distribution board and conduct test.
 Carried out Maintenance 3phaseand 1phase all Table Chiller,Chiller Room,Room Freezer and Warmer
 Re run wiringand install to position CCTV camera to all hotel level and conduct system test to rectified
system operation in good condition.
 To manage and carried maintenance factories,apartments and hotel in Malaysia and Singaporebelong
to Company Chairman.
 To do reports and submit to Chairman, situation of assets in Malaysia and Singapore for his action.

4. Maintenance Fitter at Grand Bluewave Hotel And Apartments ( 5 Star Hotel)
1st January 2009 to 31st December 2010
 Caried out maintenance/overhaul Air Cond ColingTower,piping system and control valves,incoming
and outgoing f/water system and conduct system functional test.
 Carried out maintenance/overhaul 3phaseand 1phaseElectrical Driven Rotation Motor,inpect
rotor,fields coil,replaced frontand rear bearing,check AC Current incomingand outgoing system,re
install to position and conductload test.
 Carrid outmaintenance HVAC and system,AHU and system and FCU system,chemical clean
Evaporator,cleaningroomunit,adjustdriven belt and conduct load test.
 Carried out maintenance/overhaul 3phaseand 1phaseAC current shortage/problem of Main switch
Board,Distribution Board and sub Distribution Board and conducttest.
 Carried out maintenance/overhaul 3phaseand 1phaseTable Chiller,Chiller Room,Room Freezer and
warmer.
 To do reported and submit to the top level all the situation of Engineering Department.
Coordinator atPerlis Marine Engineering Sdn Bhd
1stJanuary 2011 to 31stDecember 2012
 To attend Board Of Executive meeting on Tender requirements,Contract Documents,Contract
Agreements,Term of contract,Penalties,Liquidated Damages and other factor of requirements.
 To review Details of Drawing,Approved Drawing,Ammenmends of Drawing,Classification Approved
and coordinatein preparation on projectstartingdate.
 Manage and monitor equipments and materials purchaseas per classification approved,satgeof fitting
and comissioning,Cuttingand weldingfollows standard and procedures.
 To onduct Inspection,X Ray and ultrasonic testby agreed contractor in stage of projectrequest,to
informand liasewith classification bodies surveyor,submitall detailsneeded as per contract
agreements.
 To conductFitingand Comissioningof Main Engine with Reduction Gears,Propel
Systems,Electrical,hydraulic and Pneumatic system,to ensure the opeartingsystem in good working
order and approve by Classfication bodies and ContractDocuments.
 To conducttest Onboard System functional in good workingorder as per contracts
agreements,conduct harbour trialsand Sea Acceptence Trials atsea statemention by contract
agreements.
 Manage in Hand Over of Vessel to Owner and Operator as per Contract Documents,Contracts
Agreements,Term of Contracts,classification Approved includinghand over of Vessel Documentation
and Referances.
 Manage and Coordinateall projectstageaccordingto ISO 9001,14001,18001 and 27001,Coordinate
and manage procedure of QA,QC,HSSE and safety and healthy of project from earliar to completion of
works.
 Mnange and coordinateday to day works,Progress Schedule,Completion Works Schedule and to
ensure all the done in smooth operations witout penalties/Liquidated Damage.
 To coordinateto all supervisory level in PlanningOf Works to ensure all thejobs done in time without
delays.
 To control all theproject Budgets and costs to increasecompany profits
 To tableunexpected costs to miniseprofitand loss
Logistic Coordinator at Vectratec Sdn Bhd
15th March 2013 to 31stDecember 2015
 Manage in Import and Export documentation,Custom Tax,custom clearanceand haulage.

5.  Manage in goods receivingfrom Contract factories for Export,stuffing into Containers,custom
Tax,custom clearancefor export,documentation and truckingby haulage.
 Manage and deliver clients goods,arrangelocal transportation and agents,documantation and
delivery note.
 Manage all claims to Contractfactories and negatiate on rates and hours charges.
 Manage all claimfromStuffing and Unstuffing contractors,haulage,container agents and shipping
agents.
 Feedback to all Haulage,Transportation and all Contracts Factories on every scheduleand ETA & ETD
of Ships to miniseprofitloss
 To imform Port Master,Harbour Master and ShippingAgents on delay of shipments
 Managingand monitoring all goods fromcustomers arein good conditions in receivingand deliveries
 Managingall Staff to follows Standard And Procedures in Logistic Inter Distribution Standard
 Manage all warehousespaces for Safety Procedure in every time operation and to follows ISO
Standars in Logistic/WarehouseManagements
 Liaseto all departments inner and outer sidefor smooth operations.
Education
 Sekolah Menengah Syed Hassan,Kangar,Perlis,Malaysia
 SPM 3th Grade – equipvalent to Diploma
Technical Certificate.
 Apperanticeships Certificate Destination Marines services Sdn Bhd 0550-01-78
 Maintenance Fitter Certificate Destination MarineServices Sdn Bhd 0569-01-83
 Maintenance Fitter Certificate Kejuruteraan Kapal Masai Sdn Bhd 86-0021 (1)
 Maintenance Fitters Supervisor Cert. Kejuruteraan Kapal Masai Sdn Bhd 96-0021 (1)
 Sales,MarketingCoordinator And
Estimator certificate Kejuruteraan Kapal Masai Sdn Bhd 03-0021 (1)
 Maintenance Fitters Certificate Imej Klasik Sdn Bhd (New York Hotel) 0801
 Maintenance Fitters Certificate Grand Bluewave Hotel And Apartment 10-99
 Project Coordinator certificate Perlis MarineEngineeringSdn Bhd 11-99
 Logistic Coordinator Certificate Vectratec Sdn Bhd 16-28
Member/Association
 Association Of MarineIndustries Of Malaysia KKM ( ASROM before)
 Emergency Squat for oil Pollution DMS
References
 Mr Khalid Ghouse ManagingDirector DMS 073314346
 Mr Ithnin Abd Malik ManagingDirector KKM 072711340
 Mr Tong Sin See BOD/Head Maintenance IKSB 073311588
 Mr M.Kumar Group Gen. Manager GBWH 072216666
 Mr Norsaki Kassim General Manager PME 049855361
 Mr Azman Mohamad General Manager VSB 072510179
 Mr Ramlan Awang Senior Surveyor ABS 0124901725