GTU SYLLABUS AND TEACHING SCHEME

1. GTU SYLLABUS AND TEACHING SCHEME
Prepared By Asst. Prof. Dhruvil A. Patel
(M.E. Structural Engineer)
HOD, Assistant Professor
Civil Engineering Department
Kalol Institute of Technology and Research Center,
Kalol, Gujarat.
DESIGN OF STRUCTURES
(3150612)

2. CONTENTS
Design of Structures (3150612) Prepared By Prof. Dhruvil Patel2
 Teaching, lecture and credit scheme of the subject
 Objective of the course
 Detailed Syllabus
 Text book
 Reference Books
PR
O
F.D
H
R
U
VIL
PATEL

3. TEACHING+ EXAM + CREDIT SCHEME
Design of Structures (3150612) Prepared By Prof. Dhruvil Patel3
PR
O
F.D
H
R
U
VIL
PATEL

4. OBJECTIVES OF THE COURSE
Design of Structures (3150612) Prepared By Prof. Dhruvil Patel4
 To build the Professional skills, Design of Building Elements and Also analysis of
building for RCC and Steel Structures.
PR
O
F.D
H
R
U
VIL
PATEL

5. DETAILED SYLLABUS
Design of Structures (3150612) Prepared By Prof. Dhruvil Patel5
Sr.No Topics
1 Introduction
1.1 Objectives, Properties of Reinforced Concrete and Structural Steel.
1.2 Loads & load combinations
1.3 Methods of Analysis, Codes & specifications.
1.4 Design Philosophies - Working stress Method.
1.5 Design Philosophies - Ultimate Load Method
1.6 Design Philosophies -Limit State Method
1.7 Design Philosophies - Plastic Method
PR
O
F.D
H
R
U
VIL
PATEL

6. Design of Structures (3150612) Prepared By Prof. Dhruvil Patel6
Sr.No Topics
2 Philosophy of Limit state design for RC structures
2.1 Limit state of collapse & serviceability
2.2 Partial safety factors for material & loading.
2.3 Limit State of Flexure: Stress-strain characteristics of concrete & reinforcing steel.
2.4 Type of section-under reinforced, over reinforced & balance section.
2.5 Neutral Axis depth, Moment of Resistance for singly reinforced.
2.6 Doubly reinforced and flanged sections.
2.7 Limit state of Axial, Shear and Torsion.
2.8 Limit state of combined flexure & torsion.
2.9 Limit state of Bond & Anchorage.
2.10 Development length, splicing.
PR
O
F.D
H
R
U
VIL
PATEL

7. Design of Structures (3150612) Prepared By Prof. Dhruvil Patel7
Sr.No Topics
3 Limit state design of RC structural Element
3.1 Design of Beams: Simply supported beams
3.2 Design of Beams: Cantilever and continuous beams
3.3 Design of Slab: One way slabs
3.4 Design of Slab: Two way simply supported slabs
3.5 Design of Slab: Continuous slabs
3.6 Design of Column: Classifications, Assumptions
3.7 Design of Column: Design of Short Columns under axial load
3.8 Design of Foundations: Design of isolated footing under axial load
3.9 Design of Foundations: Design of isolated footing uni-axial bending
3.10 Design of Foundations: Design of combined footing.
PR
O
F.D
H
R
U
VIL
PATEL

8. Design of Structures (3150612) Prepared By Prof. Dhruvil Patel8
Sr.No Topics
4 Philosophy of Limit state design for Steel
4.1 Limit state of collapse & serviceability, partial safety factor for material and loading
4.2 Type & behavior of sections – Plastic, compact, semi-compact, slender.
4.3 Connections: Bolted connections – bearing type, behavior of bolted joints,
4.4 Design strength of ordinary & HSFG bolts.
4.5 Welded connections- Fillet and Butt weld,
4.6 design of simple connections such as lap and butt joints, truss joint connections.
PR
O
F.D
H
R
U
VIL
PATEL

9. Design of Structures (3150612) Prepared By Prof. Dhruvil Patel9
Sr.No Topics
5 Limit state design of Steel components
5.1 Axial force design: Tension member: types of tension member, behavior, modes of failure.
5.2 Design of tension member.
5.3 Design of splices.
5.4 Design of lug angle.
5.5 Compression member: Behaviour, classification of sections.
5.6 Possible modes of failure, elastic buckling of slender member.
5.7 Design of compression member having single & built-up section, lacing & battening.
5.8 Design for Beams: Type of sections, classification, Lateral stability,
5.9 Design for Beam-Columns: Type of sections, classification, Lateral stability.
5.10
Design strength of laterally restrained and unrestrained beams, shear strength, deflection, web buckling &
crippling,
5.11 Design of simply supported beam.
5.12 Combined axial and flexural design of member Beam
5.13 Combined axial and flexural design of member Column
5.14 Footing : slab based, gusseted base foundation
PR
O
F.D
H
R
U
VIL
PATEL

10. Reference Books
Design of Structures (3150612) Prepared By Prof. Dhruvil Patel10
1. P. C.Vargheese, Limit State Design of Concrete structure,
2. Shah & Karve; Limit State Theory & Design of Reinforced Concrete; Structure
Pub., Pune
2. Dr. H.J. Shah; Reinforced concreteVol-I; Charotar Pub.Anand
3.A.K.Jain; Design of Concrete Structures, Nemchand Publication
3. IS: 456 - Code of practice for plain and reinforced concrete
4. IS: 875 (Part I toV) - Code of practice for structural safety of Buildings Loading
standards
5. IS: 1893 - Criteria for earthquake resistant design of structures
6. IS: 13920 -Code of Practice for ductile detailing of RC structure subjected to
seismic force
PR
O
F.D
H
R
U
VIL
PATEL

11. Design of Structures (3150612) Prepared By Prof. Dhruvil Patel11
PR
O
F.D
H
R
U
VIL
PATEL

12. Design of Structures (3150612) Prepared By Prof. Dhruvil Patel12
PR
O
F.D
H
R
U
VIL
PATEL

13. Design of Structures (3150612) Prepared By Prof. Dhruvil Patel13
THANK YOU
PR
O
F.D
H
R
U
VIL
PATEL