1. 3504 Clubhouse Circle
Washington, PA 15301
(304) 421-4843
chrisrosebud2010@gmail.com
CHRISTOPHER ROSE, P.E.
Resume
I am a highly motivated and self-disciplined professional engineer with thirteen
years of experience ranging from industrial and commercial structure design to
bridge analysis. I also have the ability to problem solve. I have learned from each of
my experiences and they have cultivated the engineer I am today. I am actively
seeking a structural engineering position where my experience and knowledge will
be an asset while allowing continual growth and development.
Included in this document, you will find my resume. References and a list with
descriptions of sample completed projects are available upon request. Please feel
free to contact me by phone (304-421-4843) or by email
(chrisrosebud2010@gmail.com) at your earliest convenience.

2. CHRISTOPHER ROSE, P.E.
Education
 West Virginia University Institute of Technology, Montgomery, WV 1998-2002
B.S. Civil Engineering, Academic Dean’s List
Professional Experience
 CDMG, Canonsburg, PA 06/2012-03/2016
Design Engineer II
My main responsibilities included structural analysis and design of industrial structures including new buildings, building
additions, equipment foundations, pipe supports, and water treatment tanks. Most of the clients were in the steel, glass, and
water treatment industries. I acted as the lead engineer on many projects and was responsible for distributing tasks among
myself, other engineers, drafters, and designers. I assisted in producing construction documents. I provided post-engineering
services including shop drawing review, responding to RFIs, and approving contractor substitutions. I also developed
proposals and engineering/construction estimates. Finally, I visited job sites to gain additional field information and to meet
with clients directly and address their needs. I was the main point of contact for several of our clients.
 ZMM Architects and Engineers, Charleston, WV 09/2009-06/2012
Structural Engineer
I was the engineer of record for commercial structures including schools, office buildings, hospitals, and department of
defense structures. I was responsible for all aspects of structural design for steel, reinforced concrete, masonry, and
timber structures. I produced all structural construction documents for my projects. Additionally, I provided post-
design services including shop drawing review, approving contractor substitutions, and responding to RFIs. Finally, I
performed site visits to gather field dimensions and information.
 CDI Engineering Solutions, Charleston, WV 06/2006-09/2009
Structural Engineer
CDI’s main base of clients was in the chemical and petrochemical industries. I was responsible for structural analysis and
design of platforms, new buildings, building additions, equipment foundations, and pipe supports. I occasionally assisted in
editing and producing construction documents. I also visited job sites to gather field dimensions, assist with surveying, and
meet with clients. Finally, I was responsible for reviewing shop drawings, responding to RFIs, and performing engineering
estimates.
 West Virginia Department of Highways, Charleston, WV 01/2003-06/2006
Staff Engineer
I worked for the maintenance department which was responsible for the state’s bridge inspection programand issuing permits
for oversized and overweight vehicles. My main responsibilities were reviewing bridge inspection reports, analyzing and
load rating existing bridges, and assisting district personnel. I often used inspection reports to load rate bridges for new
conditions including damage and deterioration. I also analyzed bridges for overweight vehicles. I worked with many
different types of bridges including steel girder, pre-stressed beams, steel trusses, and timber decks. I acted as the liaison
between my department and the company that produced our custom load rating software. I worked in the state’s central
office and was also responsible for assisting each state district with complex analysis situations and providing analysis
software training.
Professional Organizations
 AISC, Member since 2012
Certification and Licensure
 Registered Professional Engineer in Pennsylvania and West Virginia
 NCEES Record Holder
Additional Skills
 STAAD, RAM Structural System, AutoCAD, AutoCAD Architectural, Revit Structure, Word, Excel, PowerPoint
References Available Upon Request