This kit is designed to replace the traditional method of Heatshrink Wrap-Around Sleeves, offering a single product capable of repairing any cable up to and including 170mm overall diameter. A totally enclosed mixing and pouring system enables a safer installation, and negates the need for naked flames or heat sources. The use of the resin outer encapsulation provides a secure mechanical protection, and is resistant to hydrocarbons and salt-water. The outer tape wrap and nozzle assembly can be cleanly removed, leaving a smooth profile suitable for cable-tray and bunched applications.

1. FEATURES
• No heat source required
• No specialist tools
• Enclosed mixing and pouring
• Suitable for cables up to 170mm diameter
as standard
• Suitable for use as a moisture seal
• Suitable for direct buried and vertical
applications
• Suitable as an outer seal on EPR, XLPE, PVC
and PILC LV and MV cable sheaths
• Void filling properties of the resin, negate the
requirement for additional mastic tapes or gap
fillers
• Kit contains all components required; including
the resin, tape, nozzles and gloves
• Suitable for use on LV, MV & HV cables
• Seawater resistant
• Hydrocarbon resistant
• Can be de-laminated (tape & blue injection valve
can be removed, once cured)
Product Name Cable diameter maximum (1 sheet of gauze) Cable diameter maximum (2 sheets of gauze) Order Unit
FiloSlim Repair kit – 170mm Ø 90mm Ø 170mm 1 repair kit
FiloSlim LV cable jointing system - Cable repair
Filoform UK Ltd, Unit K, Lambs Farm Business Park, Basingstoke Road, Swallowfield, Reading, Berkshire, RG7 1PQ
Tel: 01189 886 873 - Fax: 01189 886 576 - Email: info@filoform.co.uk - Web: www.filoform.co.uk
The FILOSLIM Sheath Repair Kit utilizes a totally enclosed
mix-and-pour polyurethane resin technology, designed for
use as a permanent repair of damaged cable sheaths.
The combination of the Filoform 3D Gauze and the
FILOSLIM Injection Resin, enables a quick and easy method
of sealing and protecting damaged areas; whilst the
hydrocarbon resistant outer sealing tape offers protection
in the tough conditions found in direct buried and free-
standing applications.
Cables can be buried immediately after the pouring of the
resin, and full cure is achieved after one hour. This makes it
a quick and reliable alternative to heatshrink repair sleeves
but with the added mechanical protection of a hard curing
resin. This lends itself to applications where there is a
probability or risk of moisture ingress or flooding.
The FILOSLIM LV cable jointing system is approved in
accordance with NEN EN 50393 and IEC 60455-3-8:2013
The FiloSlim cable repair set contains two pieces of each part.
When using one 3D gauze mat it is suitable for cables with a max. diameter of 90mm
When using two 3D gauze mats it is suitable for cables with a max. Diameter of 170mm.
oil HIGH
VOLTAGE
= =