Create something unique this season with this Owl Applique Hoodie design. Spruce an old jacket, or add the owl to a new one as a gift for a loved one. No matter who wears the finished piece, it's sure to be a treasured one.

1. How To
Sew:
Hoodie with
Owl

2. Recommended Machine:
JK - SHIRLEY
Water-soluble fabric marker
Assorted fabric scraps
Appliqué pressing sheet
Fabric spray adhesive
Satin Foot
Pins
Darning/Embroidery Foot
Purchased hoodie
Thread
Fabric
Aqua Magic™ stabilizer
Fusible web
Scissors
Shopping List:

3. Sewing Directions:
1. Follow the Owl outline components onto the fusible web
with a texture marker. Generally removed the shapes.
2. Pull away the defensive "waxy" some portion of the paper
that does not have the outline on it. Put the sticky side of
the piece onto the wrong side of the texture scrap. Ensure
you can see the plan.
3. Press with an iron, yet don't utilize steam. Cut out the
outline on the drawn line. Rehash for all the Owl plan
design pieces.
4. At the point when all the plan pieces are removed,
mastermind them on the hoodie. At the point when situation
has been resolved, peel off the rest of the bit of defensive
waxy paper and put on the hoodie.

4. 5. Cover the outline with the appliqué squeezing sheet and
iron in place with the iron.
NOTE: BE WATCHFUL WITH THE APPLIQUÉ SQUEEZING SHEET,
AS IT WILL PROBABLY END UP PLAINLY HOT FROM SQUEEZING.
6. Put a bit of Aqua Magic™ stabilizer on the back of the
outline.
7. To set up the machine for a Satin Stitch (for the appliqué),
supplant the standard presser foot with a Satin Foot. Select
the crisscross line on the machine's Pattern Selector Dial,
at that point set the Stitch Width Dial to a medium-short
setting. The line length ought to be set to a short setting–
little enough that no texture appears between the lines,
however not so short that the texture stalls out under the
presser foot.

5. 8. Utilizing a piece of texture backed with stabilizer, test the
crisscross stitch. On the off chance that the lines still appear
to be too far separated, bring the fastens nearer together by
shortening the join length setting. In the event that the join
appear to be stalling out under the presser foot, make the
fastens more distant separated by protracting the fasten
length setting.
9. At the point when happy with the look of the Satin Stitch,
sew around the edges of the Owl outline.
10. One procedure that can be utilized to make surface is
free-movement sewing. To set up for freemotion sewing,
cover the feed dogs with the Darning Plate from the
embellishment compartment. Expel the presser foot and
shank, at that point append the Darning/Embroidery Foot.

6. 11. Select a Straight Stitch and start making round movements
on the appliqué piece until it is totally filled in. Do not stress
if the lines are not uniform. Cross the string lines and simply
have a fabulous time filling in the space. Keep in mind that
once the feed dogs are secured (or brought down), you
control where the texture goes and at what rate of speed.
Have a go at rehearsing on a piece of texture to get more
alright with the movement before moving to the venture.
12. Expel the overabundance stabilizer when wrapped up. The
remaining stabilizer will turn out the first run through the
hoodie is washed.

7. Inner Eyes
(White)
Outer Eyes
(Black)
Eyes on Mask
(White)
Cut Out
Owl Belly
Owl Body
Owl Mask
Branch
Leaves

8. www.candcenterprise.com