Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.

Auto Tools Fyler – CarQuest – AutoBarn.ca

94 Aufrufe

Veröffentlicht am

Get the best Auto Tools at a discount from CARQUEST Autoparts. Visit Auto Barn in Essex Ontario for all the best in Auto Tools at the best prices possible! – Valid from Sept 27 till Dec 26

Veröffentlicht in: Automobil
  • Als Erste(r) kommentieren

  • Gehören Sie zu den Ersten, denen das gefällt!

Auto Tools Fyler – CarQuest – AutoBarn.ca

  1. 1. NEW RE S I S TAN T WATER P ROOF WATER TOOLS &EQUIPMENT Offers valid March 28, 2019 - June 26, 2019 For more information, contact your local delivery store. Longer financing available up to 60 months. Professional quality parts, service and solutions dedicated to your shop. 2nd Quarter 2019 – Canada Only NEW NEW NEW NEW TECH TIPSee p. 3 DeWALT® AND MILWAUKEE® POWER AND AIR TOOLS KEYS TO HVAC SYSTEM EVALUATION SA10 Rise: 74-1/2" Overall Height: 142-1/2" Overall Width: 137" Drive Through: 98-3/4" Arm Reach: 22" - 59" Challenger Lifts® SA10 10,000 lb. 2-Post Lift • Features 3-stage front arms which provide greater overall arms sweep with adjustable height and width options • Symmetric or True Asymmetric setup • Includes double telescoping screw pads, durable powder coat finish and plated arm restraints and pins CLL SA10 * Contact your local store for pricing and availability FINANCE IT Challenger Lifts® E-Series Heavy-Duty 12,000 lb. Symmetric 2-Post Lift • Features include telescoping arms, automatic arm restraints, rubber protective door guards, single point mechanical lock release system and padded overhead shut off system • Includes Stack Adapter Extension Kit • Optional 2' column height truck lift extensions that accommodate even higher profile vehicles are also available • Available in Red or Blue CLL E12 * Contact your local store for pricing and availability Rise: 78 Overall Height: 165 - 177 Overall Width: 140 Drive Through: 103 Arm Reach: 36 - 54 FINANCE IT E SERIES E-12 Bayco® USB Rechargeable EDC Flashlight • 275 lumen CREE® LED rated for 50,000+ hours • Momentary or constant-on • Sharp focused beam • IP-X7Waterproof,chemical,heat and impact resistant • Only 4-1/2 long and 3 oz. • Meets the requirements for NFPA-1971-8.6 (2013) • 2' USB cord with rechargeable lithium-ion battery (included) BAY USB-320 $ 7099 IN THE SPOTLIGHT A/C SERVICE SYSTEMS See p. 30-32 for A/C service, testing tools and chemicals from these leading brands. 3/8 DeWALT® Air Ratchet • Ergonomic handle with rubber cushion grip and touch control trigger SBD DWMT70776L $ 10095 Milwaukee® M18 FUEL™ 1/2 Compact Impact Wrench with Pin Detent Kit • Includes M18 FUEL™ 1/2 Compact Impact Wrench with Pin Detent, (2) M18™ RED LITHIUM™ Extended Capacity Batteries, Multi-Voltage Charger, Belt Clip and Hard Case • Delivers 220 ft/lbs of max torque • 4-mode DRIVE CONTROL™ provides greater control over output speed and power • Utilizes a pin detent design for maximum socket retention MLK 2755-22 $ 55267 See p. 1-3, 17-19, 22-23, and 46-47 for DeWALT® and Milwaukee® products
  2. 2. Services Financiers Affiliés Affiliated Financial Services FINANCING One CALL Does it ALL with Affiliated Financial Services Affiliated Financial Services (AFS),an industry leading financial services company across Canada,provides innovative lease-to own finance options for acquiring your NEWTools Equipment from CARQUEST® Auto Parts. Lease terms of 24 through 60 months are available.All leases are subject to credit approval, 1st advance lease payment and a one time non-refundable documentation fee of $100.00 will be charged on the 1st invoice upon completion of the executed agreement. Minimum financed amount is $1,000.00 as noted by sample payment information provided by each item. Please note that finance payments will vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All offers subject to change without notice. Select your Tools Equipment Call AFS at 1-855-209-0999 to complete the credit process Upon credit approval and documentation, order your new equipment www.groupesfa.com Financing your New Equipment is as easy as 1-2-3 with Affiliated Financial Services… 1 2 3 INDEX SALES POLICY 2 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. Participation in this promotional program by a Carquest® Auto Parts store is voluntary. Every promotion is a bona fide offer. Occasionally, an advertised item may not be available because of sales that exceed anticipated demand or circumstances beyond our control.We reserve the right to substitute an item of equal or better value in the event that stock of an advertised product is depleted. Prices may vary in different styles and from market to market. Additional delivery and freight charges may be incurred. Errors in prices, descriptions and/or illustrations are not the responsibility of the Carquest® Auto Parts store. PRICES GOOD IN CANADA ONLY. Additional freight charges may apply on drop ship orders. DIFM-20994171-CAN-ENG A/C Cooling Service . . . . . . . . . . . . . . . . . 30, 31, 32 Abrasives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Air Compressors . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21 Air Hose Air/Oil/Grease Reels . . . . . . . . . . . . 21, 22 Air Pressure Regulators. . . . . . . . . . . . . . . . . . . . 20, 21 Air Tools . . . . . . . . . . . . . . . . . . . . . . . . . . 1, 17, 18, 19 ATF Service Systems . . . . . . . . . . . . . . . . . . . . . . . . 33 Battery Service . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5, 6 Brake Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Chassis/Suspension Service . . . . . . . . . . . . . . . . . . . 6 Creepers/Shop Seats . . . . . . . . . . . . . . . . . . . . . . . 34 Diagnostic Tools . . . . . . . . . . . . . 24, 25, 26, 27, 28, 60 Drill Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Engine Drivetrain. . . . . . . . . . . . . . . . . . . . . . . . . 6, 7 EVAP Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Fluid Evacuators . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53, 55 Hand Tools . . . . . . . . . . . . . . . . . . . . 10, 11, 12, 13, 14 Heavy-Duty Service . . . . . . . . . . . . . . . . . . . . . . . 28, 29 Hybrid Service . . . . . . . . . . . . . . . . . . . . . . . . . . 30, 31 Jump Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Leak Detectors . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 32 Lifting Support . . . . . . . . . . . . . . . . . . 37, 38, 39, 40 Lighting . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43, 44, 45 Oil/Lube Service . . . . . . . . . . . . . . . 45, 46, 47, 48, 49 PBE . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 53, 54, 55 Power/Pressure Washers . . . . . . . . . . . . . . . . . . 34, 35 Power Tools . . . . . . . . . . . . . . . . . . . . . . 1, 2, 3, 22, 23 Power Steering Service Systems . . . . . . . . . . . . . . . 33 Pullers Slide Hammers . . . . . . . . . . . . . . . . . . . 9, 10 Service Systems . . . . . . . . . . . . . . . . . . . . . . . . . 32, 33 Shop Equipment Safety . . . . . . . . . . . . . . . . . . 55, 56 Specialty Tools . . . . . . 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Spray Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Tire Changers . . . . . . . . . . . . . . . . . . . . . 37, 38, 39, 40 Tire Service . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39, 40 Tool Boxes/Storage . . . . . . . . . . . . . . . . . . . . . . 15, 16 Trailer/Towing . . . . . . . . . . . . . . . . . . . . 49, 50, 51, 52 Transfer Pumps . . . . . . . . . . . . . . . . . . . . . . . . . 47, 48 TPMS Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Vacuums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 35 Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56, 57 Wheel Balancers . . . . . . . . . . . . . . . . . . . . . . . . 39, 40 Wire Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 NEW PRODUCTS POWER IMPACTS POWER IMPACTS DeWALT® 20V MAX 1/2 High Torque Impact Wrench Kit • Includes (1) 1/2 High Torque Impact, (1) Fast Charger, (2) 20V Li-Ion 4 Ah batteries and Kit Bag • 400 ft.-lbs. of maximum torque • Hog ring anvil for quick and easy socket changes NEW NEW NEW NEW NEW NEW NEW DeWALT® 12V MAX 3/8 Impact Wrench Kit • Includes (1) 3/8 impact wrench, (2) 12V li-ion battery packs, (1) fast charger and contractor bag • Hog Ring Anvil for fast socket changing • 3 LEDs with 20-second delay after trigger release • 1150 in.-lbs. of torque power SBD DCF813S2 $ 22403 DeWALT® 20V MAX 3/8 Impact Wrench Kits • Includes (1) Impact Wrench, (2) 20V Li-Ion 3 Ah batteries, (1) Fast Charger and kitbox • Hog ring anvil for quick and easy socket changes • 3 LED lights with 20-second delay after trigger release SBD DCF883M2 $ 43238 SBD DCF889HM2 $ 54806 Milwaukee® M18 FUEL™ 3/8 Compact Impact Wrench with Friction Ring • Delivers 210 ft/lbs max torque • 4-mode DRIVE CONTROL™ provides greater control over output speed and power • Friction Ring design ensures quick and easy socket changes NOTE: Battery not included MLK 2754-20 $ 25267 Milwaukee® M18 FUEL™ 3/8 Compact Impact Wrench with Friction Ring Kit • Includes M18 FUEL™ 3/8 Compact Impact Wrench with Friction Ring, (2) M18™ RED LITHIUM™ Extended Capacity Batteries, Multi-Volt Charger, Belt Clip and Hard Case • Delivers 210 ft/lbs max torque • 4-mode DRIVE CONTROL™ provides greater control over output speed and power • Friction Ring design ensures quick and easy socket changes MLK 2754-22 $ 55267 Milwaukee® M18 FUEL™ High Torque 1/2 Impact Wrench with Friction Ring • Delivers 1000 ft/lbs of fastening torque, 1400 ft/lbs of nut-busting torque • 4-mode DRIVE CONTROL™ provides greater control over output speed and power • Friction ring design ensures quick and easy socket changes • LED light to illuminate the work area NOTE: Battery not included MLK 2767-20 $ 37946 Milwaukee® M18 FUEL™ 1/2 Mid-Torque Impact Wrench with Friction Ring • Delivers up to 450 ft/lbs of fastening torque, 600 ft/lbs nut-busting torque • Compact length of 6.7 allows access in tight spaces • 3-Mode DRIVE CONTROL™ provides greater control over output speed and power of max 2,400 RPM NOTE: Battery not included MLK 2861-20 $ 32142
  3. 3. CTI TECH TIP For more information, contact your local delivery store. 3 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. Keys to proper HVAC system evaluation With Air Conditioning season rapidly returning, it is a good time to review some keys to proper system evaluation. Modern systems are finely tuned due to space and design targets. More systems use variable displacement compressors, while some use Artificial Neural Networks to enhance operation.The goal is to control the cabin environment without using unnecessary energy.This means that evaluation of the system should be done in a precise and repeatable manner. Manufacturers provide A/C performance tests that are specific to the make, model, and year of vehicle.These procedures will include system settings and details such as door condition (open or close) and window positions.With the vehicle properly conditioned according to the test, temperatures, pressures, and performance, the specific ambient conditions can be evaluated. Changing any part of the vehicle’s state can have a large impact on the results. Here are a couple of captures from a 2019 Chevy® Colorado. In the first capture, the system was running and stabilized with the doors and windows closed at idle. Notice the evapourator temperature sensor is showing 37 degrees and the compressor solenoid valve is commanded to 70% duty cycle.The next capture shows what happened in under two minutes after opening the driver door six inches.The compressor solenoid is not commanded at 100% duty cycle (max displacement) and the evapourator temperature has increased 10 degrees! This will change the vent temperature. These details and specifications will be the basis for repair verification and system evaluation. It can even help our clients understand the nature of system operation. NewProducts DeWALT® Heat Gun Kit • LCD display allows user to adjust temperature within 50° increments • Built-in overload protection shuts the heating element down and prevents burn up • Built-in innovative kickstand support provides greater stability and prevents tip over • Built-in hang ring adds a storage feature • Cord protector keeps the cord from tearing away from the housing • Ergonomic comfort grip provides greater comfort for long hours of use • Lightweight and compact design weighs only 2.3 lbs SBD D26960K $ 17884 NEW PRODUCTS DeWALT® 20V MAX Drill Driver and Impact Driver 2-Tool Combo Kit • Includes (1) 1/2 Drill/Driver, (1) 1/4 Impact Driver, (2) 20V MAX 1.3Ah battery packs, 20V MAX charger and Contractor Bag • 1/2 Drill driver features two-speed transmission and 1/2 single sleeve ratcheting chuck • 1/4 Impact features 3 LED light ring with 20 second delay • 1/4 Impact delivers 117 ft.-lbs. of max torque SBD DCK240C2 $ 30767 MILWAUKEE® M18 FUEL™ TOOL KITS Milwaukee® M18 FUEL™ 5 Tool Combo Kit Milwaukee® M18 FUEL™ 7 Tool Combo Kit • Includes M18 FUEL™ 1/2 Hammer Drill/Driver, M18 FUEL™ 1/4 Hex Impact Driver, M18 FUEL™ SAWZALL® Reciprocating Saw, M18 FUEL™ 6-1/2 Circular Saw, M18 FUEL™ 1/2 Mid-Torque Impact Wrench with Friction Ring, M18 FUEL™ 4-1/2/5 Grinder, Paddle Switch No-Lock, M18 FUEL™ Work Light, (2) M18™ RED LITHIUM™ Extended Capacity Batteries, Multi-Voltage Charger, Side Handle, 6 18 TPI Thin Kerf Ice Hardened™ SAWZALL® Blade, Circular Saw Blade, Grinding Disc, (3) Belt Clips, (2) Bit Holders and (2) Carrying Cases Milwaukee® M12™ Cordless LITHIUM-ION 3-Tool Combo Kit • Includes M12™ 3/8 Drill/Driver, M12™ 1/4 Hex Impact Driver, M12™ HACKZALL™ Reciprocating Saw, (2) M12™ RED LITHIUM CP1.5 Batteries, M12™ Battery Charger, and Tool Bag • Lightweight, hex impact driver delivers 1000 in/lbs of torque and 0-2000 RPM • Drill/driver delivers up to 275 in/lbs of torque and 0-400, 0-1500 RPM • On-board battery fuel gauge displays remaining run time MLK 2498-23 $ 64731 NEW NEW NEW NEW NEW• Includes M18 FUEL™ SAWZALL® Reciprocating Saw, M18 FUEL™ 1/2 Hammer Drill/Driver, M18 FUEL™ 1/4 Hex Impact Driver, M18 FUEL™ 6-1/2 Circular Saw, M18 FUEL™ Work Light, (2) M18™ RED LITHIUM Extended Capacity Batteries, Multi-Voltage Charger, Side Handle, (2) Belt Clips, (2) Bit Holders and Carrying Case MLK 2997-25 $ 127678 MLK 2997-27 $ 178571 FINANCE IT FINANCE IT
  4. 4. 4 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. BATTERY SERVICE BATTERY CHARGERS/MAINTAINERS Schumacher® 80A 12V Battery Charger/Engine Starter • 80A engine start/20A Boost • Charges standard,AGM and Gel, and deep-cycle batteries • Microprocessor-controlled, automatically adjust amperage rate, to charge and maintain • Multi-stage charging for precision, safety and battery life CBC SC1306 $ 7999 Schumacher® 6A 6/12V Battery Charger/Maintainer • Charges standard and AGM batteries • Microprocessor-controlled, automatically adjust amperage rate, to charge and maintain • Multi-stage charging for precision, safety and battery life • Float mode monitoring maintains optimum battery charge • Auto-volt detection – 6 or 12 volt CBC SC1320 $ 5899 Schumacher® 1.5A 6/12V Fully Automatic Battery Maintainer • Maintains standard,AGM and deep-cycle batteries • Microprocessor-controlled, automatically adjust amperage rate, to charge and maintain • Multi-stage charging for precision, safety and battery life • Float mode monitoring maintains optimum battery charge • Auto-volt detection – 6 or 12 volt CBC SC1355 $ 2999 Schumacher® 15A 6/12V Fully Automatic Battery Maintainer • Maintains standard,AGM and deep-cycle batteries • Microprocessor-controlled, automatically adjust amperage rate, to charge and maintain • Multi-stage charging for precision, safety and battery life • 15A rapid charge − 3A maintain • Auto-volt detection – 6 or 12 volt CBC SC1359 $ 7799 Schumacher® 1.5A 6/12V Fully Automatic Battery Maintainer • Specifically designed for vehicles in storage and cold weather • Includes double-sided adhesive and cable tie for mounting • Approved for under-the-hood mounting • Multi-stage charging and float mode monitoring CBC SC1300 $ 4699 SOLAR® BA7 12V Battery Starting/Charging System Tester • Tests multiple battery types including Conventional, Maintenance Free,AGM, Gel Cell, Marine and Deep Cycle batteries • Operating range: 100-1200 CCA • 20 Cables with reverse polarity and over-voltage protection • 1 Year Limited Warranty SLR BA7 $ 9999 BATTERY TESTERS DSR® Industrial Series 6V/12V Battery and 12/24V Charging System Tester with Built-in Printer • 3 testers in 1: battery, charging, starting • 3-button operation 16-character LCD with adjustable back-lit readout • Includes rugged carry case CBC PST-900X $ 62999 MIDTRONICS PBT-300 Battery Tester Automotive Battery and Electrical System Analyser • Test 12V wet batteries from 100-1400 CCA • Proven conductance algorithms ensure accuracy • Simple, battery pass/fail result plus voltage • Pass/fail result for starter and alternator • Bad-cell detection CBC PBT-300 $ 26499 MIDTRONICS MDX-P300 with Integrated Printer OTC® SABRE HP Battery Electrical System Diagnostic Tester • Digital circuitry controls battery test loads to accurately determine battery conditions •Tests FLA andAGM batteries accurately down to 1V • Includes SABRE HP,3' test leads,side-post terminal adapters,instruction manual,and moulded plastic carrying case OTC 3167 $ 72499 OTC® Digital Battery Tester • Tests 12V batteries (125-1400 CCAs) and analyses by measuring multiple parameters within the battery to deliver accurate results •Live voltmeter allows easy starting/charging system testing • Indicates the battery’s good/bad status, voltage, and available CCAs OTC 3183 $ 19999 Requires downloading the FREE OTC 3200 APP after purchase for full functionality. OTC 3200 $ 49999 OTC® 3200 Smart Battery Tester • Test battery, starting and charging systems in less than 3 minutes using your smartphone or tablet • A comprehensive, full colour data report is sent directly to your smart device • Smart devices (not included) must have a rear-facing camera to meet full requirements • How It Works: Download the OTC3200 App (compatible with iOS and Android devices) and scan the QR code on the battery tester to immediately see battery test results; To receive data about the starting and charging system, start the engine and scan the next QR code to receive results • Test 12V wet batteries from 100-1400 CCA • Proven conductance algorithms ensure accuracy • Simple, battery pass/fail result plus voltage • Pass/fail result for starter alternator • Bad-cell detection- AGM Gel battery modes • Test by CCA, CA, MCA, DIN, JIS, and more • Built-in thermal printer with customizable header • Multi-language – English, Spanish, French Japanese CBC MDX-P300 $ 59999
  5. 5. For more information, contact your local delivery store. 5 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. BATTERY SERVICE ES2500 900 Peak Amps • 12V jump starter, 300 cranking amps • Entry level professional jump starter SLR ES2500 $ 13999 ES5000 1500 Peak Amps • 12V jump starter, 400 cranking amps • For the professional who needs serious starting power SLR ES5000 $ 17999 • ES Series battery designed for vehicle jump starting • Battery status LEDs • Automatic charging, heavy duty flexible cables • Hot Jaw clamps SOLAR® BOOSTER PAC® ES6000 3000 Peak Amps, 12V Jump Starter, 800 Cranking Amps • Dual high performance ES Series batteries offer extended cranking power and superior performance • Automatic charging keeps Truck PAC® in an always-ready state • Includes 54 #4 AWG cables with Hot Jaw™ clamps • 1-Year Limited Warranty SLR ES6000 $ 42999 SOLAR® TRUCK PAC® ES1224 3000 Peak Amps, 12/24V Jump Starter, 750/400 Cranking Amps • Switches from 12 to 24V with the turn of a knob • Features automatic recharging, 60 cables and Industrial Grade Hot Jaw™ clamps • AWS Advanced Warning System™ alerts the operator to unsafe jump starting conditions • 1-Year Limited Warranty SLR ES1224 $ 67999 BatteryService JUMP STARTERS • Clore PROFORMER battery specifically designed for jump starting • Heavy-duty PowerJaw™ clamps with extra-long heavy-gauge 68 cables and a 1000A capacity • High intensity LED task light • Built-in 3A automatic charging system • Master On/Off switch • Dual USB ports: 1.1A and 2.1A • Coupon for out-of-warranty service SLR JNC770R $ 24159 Schumacher® 10A 12V Fully Automatic Battery Charger • Charges standard and AGM batteries • Features START/STOP push button interface and LED indicators • Microprocessor-controlled, automatically adjust amperage rate, to charge and maintain • Multi-stage charging for precision, safety and battery life CBC SC1339 $ 6499 Schumacher® 50A 12V Fully Automatic Battery Charger/Engine Starter • 50A Engine Start/10A Boost • Charges standard and AGM batteries • Microprocessor-controlled, automatically adjust amperage rate, to charge and maintain • Multi-stage charging for precision, safety and battery life • Float mode monitoring maintains optimum battery charge CBC SC1361 $ 6499 SOLAR® Jump-N-Carry® JNC770R 12V Jump Starter 425 Cranking Amps, 1700 Peak Amps BATTERY CHARGERS/ENGINE STARTERS SOLAR® Jump-N-Carry® JNC660 12V 425 Cranking Amps, 1700 Peak Amps • Built-in automatic charger, 46 cable reach and 12V outlet to power accessories • Weighs just 18 lbs • Features Clore PROFORMER battery • 1-Year Limited Warranty SLR JNC660 $ 18999 DSR121 12V 250A • 250A engine start, 15A fast charge CBC DSR121 $ 60999 DSR122 6/12V 275A • 125A(6V)/275A(12V) engine start, 15A fast charge CBC DSR122 $ 74999 DSR123 12/24V 250A • 250A (12V)/150A (24V) engine start, 15A fast charge CBC DSR123 $ 79999 DSR® PROSERIES BATTERY CHARGERS/ENGINE STARTERS • Charges standard,AGM and Gel, and deep-cycle batteries • Microprocessor-controlled, automatically adjust amperage rate, to charge and maintain • Multi-stage charging for precision, safety and battery life • Float mode monitoring maintains optimum battery charge • Reverse hook-up protection Schumacher® 200A 12V Automatic Battery Charger/Engine Starter • 200A Engine Start/40A Boost • Charges standard and AGM batteries • Fully-automatic, microprocessor-controlled • Reverse hook-up protection • Features 6’ power cord, retractable handle and durable steel case CBC SC1324 $ 20999 Schumacher® 250A 6/12V Automatic Battery Charger/Engine Starter • 250A Engine Start/40A Boost • Charges standard,AGM, gel and deep-cycle batteries • Microprocessor-controlled, automatically adjust amperage rate, to charge and maintain • Multi-stage charging for precision, safety and battery life • Float mode monitoring maintains optimum battery charge CBC SC1325 $ 20999
  6. 6. Since 1917 FINANCE IT ® ® ® ® 6 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. BRAKE SERVICE POWERBUILT® Brake Return Spring Tool • For removing and installing return springs on brakes where the return spring hooks over a post TLS 648411 $ 299 SPECIALTY HAND TOOLS A/C SERVICE Lisle® Master Disconnect Set • A complete set of (8) popular disconnect tools • Can be stored in a handy blow-moulded case LST 39900 $ 7789 Branick® 7600 Strut Spring Compressor CHASSIS SERVICE • Handles the heaviest coil-over-shocks, on light trucks and SUV's, without needing additional adapters • Longer handles for extra torque • Multi-positions upper spring hooks can be arranged for ultimate flexibility to fit factory coil spring configurations • Heavy duty acme thread •Wall,bench or mobile cart mounting options Max Spring Compression Capacity: 3,000 lbs Minimum Spring Diameter: 3-1/2 Maximum Spring Diameter: 11-1/2 BRN 7600 $ 109999 CALIPERS/MICROMETERS MEASURING TOOLS STORM™ Electronic Digital Caliper with Fractions Range: 0-6/0- 150mm Graduations: .001/64th’s/.01mm • Digital display, inch/metric conversion • Four measurements: inside, outside, depth and step STORM™ Digital Range: 0-6/0- 150mm Graduations: .0005/.01mm • Digital display, inch/metric conversion • Four measurements: inside, outside, depth and step STORM™ Digital Rotor Gauge Range: 0-5.50 or 0-140mm Graduations: .0005 or .01mm • Digital display, inch/metric conversion • Pointed anvil • 3.5 long arms CTI 3M430 $ 9289 CTI 3C351 $ 2389 CTI 3C301 $ 4289 CTI 3B530 $ 32999 STORM® Digital Drum Gauge Range: 6- 20.00/150mm - 500mm Graduations: .001/.01mm •Easy-to-read digital display with inch/metric conversion •Selectable depth stops for easier use •Pointed anvils and 4.25 long arms to inspect drums before turning or replacing •Plastic storage case POWERBUILT® Fender Cover • 35 X 24 • Durable vinyl exterior with soft inner liner • Special pleated double top ridge to hold cover in place while keeping tools secure CPM 640083 $ 1599 Lisle® Mini Tubing Cutter BATTERY SERVICE Schumacher® Digital Power Inverters 410 W CBC PID-410 $ 9489 Schumacher® Cigarette Lighter Plug-In Power Inverter 140 W CBC PI-140 $ 4489 ENGINE AND DRIVETRAIN POWERBUILT® Tubing Bender • Bends automotive line tubing from 3/16 to 3/8 diameter TLS 648484 $ 1489 POWERBUILT® Oxygen Sensor Socket Kit (3-Piece) • For removing and installing oxygen sensors • Sockets have a special cut-out design that prevents damage to wire leads • Includes a heavy-duty carrying case and a detail usage photo and instructions TLS 648625 $ 3589 02 Sensor Offset Puller TLS 648691 $15.89 POWERBUILT® Fuel and Transmission Line Disconnect Kit • For quick and easy separation of the special couplings found in fuel lines and transmission cooler lines on domestic vehicles TLS 648650 $ 5189 Lisle® Broken Spark Plug Remover for Ford 3 Valve • Removes broken spark plugs from 2004 and newer Triton 3 valve per cylinder engines (a common problem) • Includes a unique porcelain pusher tool and a tapered left-hand thread remover for removing the broken spark plug without leaving the porcelain in the engine cylinder • Porcelain pusher is used to press the porcelain piece, without breaking the porcelain, farther into the plug tip • Blow-moulded storage case included LST 65600 $ 9889 • For all types of metal tubing • Handles smallest tubing to 5/8 O.D. • Completely non-corrosive LST 50000 $ 889 Lisle® Spring Pliers • Use plier tips to stretch brake spring • Handle ends remove and install spring over anchor post LST 11260 $ 2789
  7. 7. For more information, contact your local delivery store. 7 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. SPECIALTY HAND TOOLS SpecialtyHandTools Lisle® Serpentine Belt Tool • Used to remove and install serpentine belts on systems using the spring loaded idler pulley • Fits 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and both 3/8 and 1/2 square drive sizes • 13mm and 16mm sockets are built into the handle • Eight low profile sockets and extension help to fit into tight spots • Includes 19mm socket for Honda and Toyota applications LST 59800 $ 6999 Lisle® 17-Piece Heavy-Duty End Cap Wrench Set • For use on the most popular domestic and import vehicles • Set Includes: 65mm - 14 flute, 65/67mm - 14 flutes, 68mm - 14 flutes,73-74mm - 14 flutes,74/76mm - 15 flutes, 76mm - 14 flutes, 76mm - 30 flutes, 80mm - 15 flutes, 82mm - 15 flutes, 86mm - 14 flutes, 86mm - 16 flutes, 88.4mm - 15 flutes, 93mm - 15 flutes, 93mm - 36 flutes, 93mm - 45 flutes, 96mm - 18 flutes, 100mm - 15 flutes end cap filter wrenches LST 61500 $ 13999 ENGINE AND DRIVETRAIN Heli-Coil® SAE Metric Spark Plug Thread Repair Kits • Kits contain a tap, installation tool, a quantity of inserts and detailed instructions • The inserts are precision formed coils of extremely hard stainless steel (18-8) diamond shaped wire • When installed into a tapped hole, the insert provides permanent conventional screw threads Metric Kits Size (Number of Inserts) M5 x 0.8 (12) HC 5546-5 $44.99 M6 x 1 (12) HC 5546-6 $39.99 M9 x 1.25 (12) HC 5546-9 $44.99 M8 x 1.25 (12) HC 5546-8 $41.29 M7 x 1 (12) HC 5546-7 $51.19 M10 x 1.5 (12) HC 5546-10 $44.99 M11 x 1.5 (6) HC 5546-11 $52.99 M12 x 1.75 (6) HC 5546-12 $62.79 M10 x 1.25 (12) HC 5543-10 $62.99 M12 x 1.25 (6) HC 5543-12 $79.01 1/4-20 (12) HC 5521-4 $29.99 5/16-18 (12) HC 5521-5 $29.99 5/8-11 (6) HC 5521-10 $69.99 1/2-13 (6) HC 5521-8 $38.99 7/16-14 (6) HC 5521-7 $29.99 3/8-16 (12) HC 5521-6 $29.99 1/2-20 (6) HC 5528-8 $55.29 7/16-20 (6) HC 5528-7 $49.69 3/8-24 (12) HC 5528-6 $49.69 5/16-24 (12) HC 5528-5 $49.69 SAE Kits Size (Number of Inserts) Heli-Coil ® M14 x 1.25 Sav-A-Thread Kit • Can be used to repair both taper seat and gasket type spark plug assemblies • Three insert lengths available to accommodate all spark plug reaches • Piloted reamer tap means no drilling is necessary and perfect alignment of the tapped hole HC 5334-14 $ 4729 Heli-Coil® Sav-A-Thread Kits • Contains a piloted reamer tap (no drilling necessary),an installation tool,and a quantity of inserts • Includes six insert lengths to accommodate all spark plug reaches M18 x 1.50 Thread Size 1/2 Reach Size HC 5523-18 $ 20999 OTC® Adjustable Hook Spanner Wrench • Use for turret adjusting or packing gland nuts • 1-1/2 - 4 capacity • 24 handle, 11/16 diameter OTC 885 $ 14999 ENGINE AND DRIVETRAIN OTC® Alternator Pulley Service Kit • Hold the alternator shaft still so the pulley can be removed or installed • Kit includes: Decoupler tool assembly, 17 mm hex drive, 17 mm Allen wrench, 110 mm socket extension, 28/21 mm hex cap nut driver, 28 /18 mm hex cap nut driver 22 mm hex cap nut driver OTC 6617 $ 7999 OTC® Valve Spring Compressor • Designed to compress valve springs on Ford 3V 4.6L 5.4L • Similar to OE p/n 303-1039 OTC 6684 $ 22999 OTC® Automatic Transmission Clutch Spring Compressor • For removing or installing the snap ring on a transmission rear clutch piston • For use on most American cars and light trucks OTC 7024 $ 16999 OTC® Fuel Injection Cleaner Canister • Designed for direct fuel rail and injection cleaning • Stainless Steel Construction with wide throat to reduce spillage - safely holds up to 22 oz. • Easy to read 3-1/2 Gauge for setting accurate delivery pressure • Includes blow-out fitting for use with shop air supply to remove residual chemical from hose - improving product life OTC 7448A $ 19999
  8. 8. TM 8 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. SPECIALTY HAND TOOLS Lisle® Oil Filter Pliers • Two-position, slip-joint handle produces the range of three separate conventional filter wrenches • Jaws are bent at a 20° angle to fit more applications • Sure grip teeth prevent slipping • Range: 2-1/4 to 4 LST 50750 $ 4189 Lisle® Truck Tractor Oil Filter Pliers • Fits most truck and tractor oil filters including: Case, Caterpillar, Cummins, Detroit Diesel, John Deere, Mack and other applications • Range: 3-5/8 to 6 LST 50950 $ 5889 OIL/LUBE SERVICE Lisle® Straight Handle Filter Wrench • 1 stainless steel band with special “teeth” grips tightly • Vinyl-covered handle provides firm, comfortable grip LST 53900 $ 889 Standard 3-1/2 - 3-7/8 LST 53700 $ 1089 Cummins Detroit Diesel 4-5/16 - 4-3/4 LST 54200 $ 1589 Small 2-3/8 - 2-5/8 LST 54400 $ 1189 Caterpillar 5-1/4 - 5-3/4 LST 54300 $ 1689 John Deere 4-3/4 - 5-3/16 LST 53200 $ 1589 Lisle® Truck Oil/Fuel Filter Wrenches • “Swivel Grip” handle makes it easy to turn in tight spots • Tough, stainless steel bands with special “teeth” for extra gripping power won’t slip • Handles made of tubular steel for increased strength Lisle® Adjustable Oil Filter Wrench • Stainless steel band with special teeth for extra gripping power • 1/2 square drive • Range: 4 3/8 - 5 5/8 (111.1 - 142.8mm) LST 53100 $ 1889 Standard 3-1/2 - 3-7/8 LST 53500 $ 1089 Large 4-1/8 - 4-1/2 LST 53250 $ 1289 Oil Filter Wrenches • Features the swivel handle, gripper “teeth” and 1 wide stainless steel band • Swivel handle makes it easy to turn filters in hard to reach locations • Vinyl covered handle Lisle® Big Range Filter Wrench • Range: Up to 6 • Use with 1/2 drive or 3/4 socket wrench LST 63500 $ 1189 Lisle® Import Car Filter Wrench • Range: 2-1/2 to 3-1/8 • Fits most all import car filters plus the common 3 domestic car filters • Use with 3/8 drive socket LST 63600 $ 1389 Lisle® Wide Range Filter Wrench • Range: 3-1/8 to 3-7/8 • Steel jaws grip filter without slipping • Use with 3/8 drive socket LST 63250 $ 1489 Lisle® 8 Qt. Dispenser with Lid and Cap • Includes spout cap and lid to keep out contaminants • Marked in quarts and litres • Flexible 8 pouring spout LST 19702 $ 3489 Lisle® 6 Qt. Oil Dispenser • Marked in quarts and litres • Flexible 8 pouring spout LST 19732 $ 2499 Lisle® 5-piece Filter Socket Set • Contains very low profile, 6 point 24mm, 27mm, 29mm, 32mmand 35/36mm sockets for use on oil and fuel filter canisters when replacing the lement. Use with 3/8 drive • 2009 and up ChevyAveo,Pontiac G3 and 2011 and up Chevy Cruze with 1.4L, 1.6L, 1.8L motor use the 24mm socket • Use with 3/8 drive LST 13300 $ 5489 Lisle® Oil Pan Plug Re-threading Kit • Includes a piloted drill, spring-loaded tapping tool and 5 magnetic drain plugs • Ensures the new thread will be perpendicular to the gasket surface to prevent leakage • Works on soft steel and aluminum oil pans with 1/2, 12mm 14mm threads LST 58850 $ 15899 OIL/LUBE SERVICE Lisle® Diesel Filter Wrenches for DAVCO Specially Designed for Removing and Replacing the Main Filter Collar and Vent Cap on Aftermarket Diesel Fuel Filter Systems. • Half-moon design provides easier access to the fuel filter • High strength steel prevents flexing while loosening filter collars • Four teeth grab the vent cap securely to prevent damage 5 Wrench • Works on diesel engines with fuel flow rates up to 60 gph, Class 4, 5, 6 trucks, pickup trucks, refrigeration units and some Biodiesel applications LST 61090 $ 3089 6 Wrench •Works on diesel engines found in Caterpillar CT660,CT11,CT13,CT15,Cummins, Detroit Diesel,International,Mercedes-Benz,Paccar,DaimlerTrucks North America,Kenworth,Mack,Navistar,Peterbilt,Thomas Built Buses andVolvo LST 61110 $ 3299 8 Wrench • Works on Detroit Diesel DD13, DD15 and DD16 engines found in Paccar, Daimler Trucks North America and Volvo LST 61130 $ 4189 Lisle® Diesel Filter Wrench for Paccar • Removes and installs bows on newer Paccar chassis mounted fuel filter assemblies • Half-moon design allows easier access to the fuel filter found on Kenworth, Peterbilt and Cummins diesels LST 61060 $ 2799
  9. 9. For more information, contact your local delivery store. 9 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. SPECIALTY HAND TOOLS SpecialtyHandTools POWERBUILT® Tie Rod Puller • For separating tie rod ends from tie rods • Can be to used for separating pitman arms from steering gear TLS 648692 $ 2189 PULLERS/SLIDE HAMMERS SPECIALTY HAND TOOLS Carquest® Gear Pullers 4 Jaw Midget, 2-Ton Max Spread: 4 Max Reach: 3-1/2 CPE 31533 $ 3449 6 Jaw Reversible, 5-Ton Max Spread: 6 Max Reach: 3-1/2 CPE 31534 $ 3489 9 Reversible 2-Jaw, 7-Ton Max Spread: 7 Max Reach: 5-1/2 CPE 31536 $ 7649 8-N-1 Puller 16 Pieces Makes 8-Different Pullers 2 or 3 Jaw Configurations, 2-Ton Max Spread: 7 Max Reach: 5-1/2 CPE 31541 $ 10289 POWERBUILT® Seal Puller • Designed for removing oil and grease seals • Two hardened tip sizes TLS 648494 $ 889 OTC® Brass Punch Set • Includes 2 punches: 8 punch (5/8 hex, tapered to 3/8) and 10” straight punch (3/4” diameter, chamfered at both ends) OTC 4602 $ 4929 OTC® 3-Piece Brass Hammer and Punch Set • Includes 24 oz. hammer, drift punch and tapered punch OTC 4606 $ 9999 OTC® 9-Piece Brass Hammer and Punch Set • Includes 2 hammers, 2 tapered punches, 1 hex tapered punch, 2 drift punches, and 2 pin punches OTC® Stinger Interchangeable Punch Chisel Set • Includes: (12) punches and chisels; (5) flat chisels; 1/2, 5/8, 3/4, 7/8 and 1 wide blades, (1) cape chisel; 1/4 wide blade, (2) taper punches; 1/8 and 1/4, (2) pin punches; 3/16 and 1/4, and (2) centre punches; 1/8 and 3/16 • Includes double-locking driver handle that holds the punch and chisel securely in place,and the easy grip handle also protects hands from being hit by hammer • Moulded case. OTC 4605 $ 9989 OTC® 4-Piece Short Pick and Hook Set • Includes four 6-1/2” soft-handled picks with assorted tip shapes • Designed for marking, removing o-rings, accessing snap rings and other assorted applications • Packaged in moulded tray OTC 8262 $ 2999 OTC® 4-Piece Long Pick and Hook Set • Includes four 9-1/4” soft-handled picks with assorted tip shapes • Designed for marking, removing o-rings, accessing snap rings and other assorted applications • Packaged in moulded tray OTC 8263 $ 2999 OTC® Pick/Hook and Hose Removal Set • Includes 6-Piece Hose Removal Set (8260), 4-Piece Short Pick and Hook Set (8262) and 4-Piece Long Pick and Hook Set (8263) • Packaged in moulded trays OTC 8260M $ 12999 OTC® Universal Outside Thread Chaser • Quickly restore threads to near new condition without expensive thread cutting equipment • Replaceable V-pads and dies • Use for 1-1/4” to 5” OD OTC 7402 $ 15899 SPECIALTY HAND TOOLS Utility Knife • Includes one blade Carbon Gasket Scraper • Features a 1 wide heat treated carbon steel blade with a corrosion resistant black oxide finish CPM 647367 $ 679 CPM 836317 $ 499 Lisle® Razor Blades • Stainless steel, single edge • 100-pack LST 52150 $ 1189 OTC® Grip-O-Matic 1-Ton Puller OTC® Pilot Bearing Puller • Designed to pull flywheel pilot bearings in close quarters where slide hammer cannot be used 1/2 to 1-1/2 OTC 7318 $ 12999 7/8” to 2” OTC 7319 $ 15999 • Max Reach 2-1/8”, Max Spread 3-1/4” • Screw Size 5/16”-24 x 3-7/8” • Jaw Thickness 9/64”,Width ¼” OTC 1020 $ 5999 OTC 4629 $ 16999
  10. 10. ® 10 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. HEX KEY SETS POWERBUILT® 9-Piece Ball End Long Arm Hex Key Sets Metric Set • Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm hex keys. TLS 640082 SAE Set • Includes 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 3/8 hex keys TLS 640081 YOUR CHOICE $ 1489 EACH SPECIALTY HAND TOOLS POWERBUILT® Micrometer Torque Wrenches • Locking handle prevents accidental setting changes 1/2 Drive Click Torque Wrench • 10-150 ft.-lbs. TLS 644999 $ 5899 CP89 Series Torque Wrenches 1/4 50 — 250 in.-lbs. CP CP8905 $ 19099 1/2 30 — 250 ft.-lbs. CP CP8917 $ 21979 • 54 fixed teeth ratchet head with quick socket release • Torque adjustment with manual locking in front of the handle • Fine scale graduation (1 Nm or 1 ft.-lbs.) • Lightweight but robust aluminum handle • Sensitive and sound signals when reaching the torque • Measurements saved for later download via email OTC® Tire Spoons • Unique Convex Slip Head curved design allows the spoon to slide easily into the tire bead while the spoon bump limits the depth for quick-and-easy operation Extending Tire Spoon 22, Extends to 34, 3/4 diameter • Twist-lock feature allows the spoon to be extended to any length and locked into position with a twist of the collar OTC 5724 $ 17499 HD Sliding Tire Spoon 38, Extends to 52, 3/4 diameter • Inner slide bar provides hammer action to easily insert and remove the spoon OTC 5716 $ 16599 Sliding Dual Tire Spoon 35, 3/4 diameter • Unique configuration provides mount and demount heads on either end with the aid of a slide hammer mounted mid bar, allowing for hammering either end in or out of the tire bead •Twist-lock feature locks 3.5 lb.slide weight in position OTC 5720 $ 18979 TIRE/WHEEL SERVICE POWERBUILT® TORX® Key Wrench Set 6-Piece Set TLS 640685 $ 1789 PULLERS/SLIDE HAMMERS OTC® Puller Leg Set • Extra set of 34” legs for Push-Puller (OTC 939) OTC 1113 $ 52999 OTC® Cylinder Sleeve Removal Plate • Bore size 4-7/8” • Removal plate will fit a full spectrum of cylinder sleeve sizes • Designed to work with sets 1200, 1202 and 1203 POWERBUILT® Harmonic Balance Installer Kit • For removing and installing harmonic balancers that have threaded holes • Fits balancers found on many automotive and light truck applications TLS 648994 $ 11789 OTC® Brake Drum and Rotor Puller • One person can easily set the tool in place and use for tough pulls even where there is little access to insert the jaws • Spread to 12-3/4 and 5 of reach. 7-tons of force, yet weighs less than 10 lbs • Can be used with air tools (not included) to reduce time and fatigue OTC 6980 $ 16999 OTC 1242 $ 16999 OTC® BLUE FORCE PRY BAR SETS • Dual due-meter handle for solid ergonomics • Striking cap contacts bar protecting handle 24, 36 and 48 bar shank lengths OTC 8203L $ 19999 8, 12 and 18 bar shank lengths OTC 8203S $ 7989 Lisle® 9-Piece Metric Hex Key Set • Includes 9 heat-treated alloy hex keys: 1.5mm— 10mm LST 42300 $ 999 Lisle® 12-Piece TORX® Bit Set • Includes the T-10 through T-50; and T-47,T-55 and T-60 bits • T-10 through T-30 are 1/4 drive,T-40 through T-55 are 3/8 drive,T-60 is 1/2 drive • Convenient vinyl holder included LST 27200 $ 4389 TORQUE WRENCHES STORM™ Torque Wrench • Chrome plated alloy steel • Reversible ratchet head 1/2 Drive • 25-250 ft.-lbs. CTI 3T425 $ 13999 1/2 Drive Needle Torque Wrench • 0-140 ft.-lbs. TLS 644044 $ 2189
  11. 11. For more information, contact your local delivery store. 11 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. TORX® / HEX BIT SETS POWERBUILT® 3/8 Drive Metric Hex Bit Socket Set 7-Piece Set • Includes 3mm-8mm and 10mm chrome vanadium bit sockets in reusable plastic holder TLS 648663 $ 1889 POWERBUILT® 3/8 Drive Extended Length TORX® Bit Socket Set 4-Piece Set •Includes T-40,T-45,T-47 and T-50 3/8 drive TORX bit sockets. •6 length for added reach TLS 647058 $ 1589 POWERBUILT® 1/4, 3/8 1/2 Drive TORX® Bit Socket Set 13-Piece Set • Includes 1/4; T-10 to T-30, 3/8; T-40 to T-55 1/2; T-60 T-70 bit sockets. TLS 940146 $ 3189 SPECIALTY HAND TOOLS SpecialtyHandTools HAMMERS • Heat-treated hardened steel head.Tough, shock-absorbing fibreglass handle. Lifetime warranty. 2.5lb. Club Hammer TLS 648332 $19.89 24 oz. Ball Pein Hammer TLS 648330 $22.99 16 oz. Ball Pein Hammer TLS 648329 $21.89 16 oz. Rubber Mallet TLS 648336 $18.99 16 oz. Claw Hammer TLS 640948 $19.95 16 oz. Soft Face Mallet TLS 648335 $21.89 648332 648336 640948 648335 648329 648330 6-Piece Precision Screwdriver Set • Swivel end handles contained in a plastic carry case • Contains: Slotted 1.4, 1.8, 2.4mm and Phillips #00, #0, #1 TLS 646507 $ 889 Lisle® Lock Ring Pliers Lisle® Convertible Internal External Snap Ring Pliers •Compresses internal rings in one position •Move the quick change reversing lever to expand external rings •Comes with four sets of tips in a plastic box LST 46000 $ 1789 • Spreads lock rings commonly found on transmissions,master cylinders,brakes,etc. • Jaws are knurled on the end to prevent slipping Jaw range: 3/32 closed, 15/16 open. LST 44900 $ 2189 Lisle® Hog Ring Pliers Spring loaded jaws hold the hog ring during use • Designed to close hog ring fasteners used on upholstery on many domestic and import vehicles • Steel pliers are durable and easy to use. Pliers have cushioned grips for comfort Straight LST 61400 Angled LST 61410 YOUR CHOICE $ 3189 EACH POWERBUILT® Combination Snap Ring Plier Set • For removing and installing internal and external snap rings TLS 648598 $ 1189 SPECIALTY PLIERS 5-Piece Torx® Screwdriver Set • Oversized Maxi-Grip handle for higher torque and added comfort • Sand-blasted and magnetized tip for better fastener grip • Contains: T-15 x 3,T-20 x 3,T-25 x 4,T-27 x 4'',T-30 x 5 TLS 646046 $ 3289 2-Piece Pocket Screwdriver Set • Oversized Maxi-Grip handle for higher torque and added comfort. Premium chrome vanadium shaft • Sand-blasted and magnetized tip for better fastener grip • Contains: Slotted 1/8 x 2-1/2 and Phillips #0 x 2-1/2. TLS 646048 $ 689 5-Piece Screwdriver Set • Oversized Maxi-Grip handle for higher torque and added comfort • Sand-blasted and magnetized tip for better fastener grip • Contains: Slotted 1/4 x 4, 3/16 x 3, 1/4 x 6 and Phillips #1 x 3, #2 x 4. TLS 646500 $ 1999 S-1x4 TLS 646053 $2.69 SCREWDRIVERS Robertson Screwdrivers S-2x4 TLS 646054 $2.89 S-3x4 TLS 646055 $2.89 OTC® 3-Piece Pin/Body Clip Plier Set • Includes three jaw configurations: straight, 45° and 90° • Safely remove and reuse fasteners without damaging anchor • Lifetime warranty OTC 2497 $ 6539 OTC® Straight Retaining Ring Pliers • Convertible pliers can be used on automotive snap rings • Size .070 diameter OTC 1340 $ 3999 OTC® 12-LB Double Face Indestructible Sledge Hammer • Drop-forged head is induction-hardened for long life • Ergonomic rubber grip handle reinforced with steel bars • Lifetime Marathon Warranty • Meets ANSI/BS876 specifications OTC 1230 $ 16999
  12. 12. 12 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. Curved Jaw with Wire Cutter Curved Jaw Straight Jaw Long Nose IRWIN® 5-Piece Original Locking Pliers Tool Bag Set • Set includes 10R, 10WR, 7CR, 5WR and 6LR in a heavy-duty tool bag. PET 2077704 $ 9999 IRWIN VICE GRIPS® SPECIALTY HAND TOOLS IRWIN® CLAMPS C-Clamp with Swivel Pads Sheet Metal Clamp 8 PET 23 $ 3299 Locking Chain Clamp 9 PET 27ZR $ 5899 Locking Welding Clamp 9 PET 25ZR $ 3999 Linesman 7 TLS 640391 $ 1689 POWERBUILT® PLIERS Long Reach Long Nose 11 TLS 640860 $ 1989 Long Nose Diagonal Groove Joint Slip Joint 8 TLS 640395 $ 1189 10 TLS 640389 $ 1589 12 TLS 640390 $ 2389 Long Nose Hose Jaw 11 TLS 640863 $ 1989 90-Degree Long Nose 11 TLS 640862 $ 1989 Mini Long Nose 5 TLS 640409 $ 889 6 TLS 640392 $ 1189 8 TLS 640393 $ 1689 6 TLS 640386 $ 1189 7 TLS 640387 $ 1889 7 TLS 646539 $ 1589 10 TLS 646540 $ 1689 Long Nose 6 TLS 645015 $ 1589 Locking Pliers •With ergonomic cushioned grips POWERBUILT® LOCKING PLIERS 6 PET 17 $ 2461 6 PET 18 $ 2909 11 PET 19 $ 2749 11 PET 20 $ 4769 C-Clamp 7 PET 4935578 $ 2299 10 PET 4935576 $ 2399 4 PET 1602L3 $ 2279 9 PET 1502L3 $ 2499 6 PET 1402L3 $ 1779 4 PET 1002L3 $ 1379 7 PET 702L3 $ 1699 5 PET 902L3 $ 1599 10 PET 0502L3 $ 1799 7 PET 7R-3 $ 1999 10 PET 0102L3 $ 1859 8 TLS 640388 $ 1989 OTC® Weather Pack Ratcheting Crimper Kit • Ratcheting crimp action to manage environmentally sealed connection systems on your vehicle • Includes 2 interchangeable dies: AWG 22/20-18 (DIN .35/0.5-0.8 mm²) andAWG 16-14/12 (Din 1.0-2.0/3.0 mm²) • Dies easily slip into place and are magnetically secure OTC 4484 $ 9499 Locking Panel Clamp 9PET 251 $ 3999 Locking Pliers with Pivot Jaw 10 TLS 645016 $ 1889 IRWIN® 3-Piece Snips Set • Contains a utility snip, multi-purpose extra cut snip with a 3-1/8 length and a thinner snip PET 2073704 $ 7559 IRWIN® PLIERS 8 PET 2078108 $ 2799 10 PET 2078110 $ 3199 12 PET 2078112 $ 3999 Groove Lock V-Jaw Diagonal Cutting Pliers 7 PET 2078307 $ 2459
  13. 13. For more information, contact your local delivery store. 13 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. POWERBUILT® Ratcheting Combo Set 7-Piece Set SAE Set • 5/16 to 3/4 TLS 640990 Metric Set • 8mm to 19mm TLS 640991 DRIVE SOCKET SETS 1/4 72-Tooth Gear-to-Gear Ratchet TLS 649985 $ 2189 10 TLS 644042 $ 1689 12 TLS 644043 $ 2289 YOUR CHOICE $ 12889 EACH SAE Set • Includes 5/32 to 9/16 sockets TLS 640497 $ 1089 Metric Set • Includes 4mm to 14mm sockets TLS 640498 $ 1389 1/4 Drive Metric SAE Socket Sets 11-Piece 6 pt. Set • Mirror polished chrome vanadium steel with dual grease rings and punched centre holes for added work depth 3/8 Drive 36 Tooth Quick Release Gear-to-Gear Ratchet TLS 641520 $ 2589 3/8 DRIVE RATCHETS 3/8 Drive Flex Handle 10 TLS 641504 $ 1089 3/8 Drive 41 Tooth Spin Disc Ratchet TLS 641505 $ 1689 POWERBUILT® 1/4 3/8 E-Torx Socket Set 10-Piece Set • Contains 1/4 Drive E-4 thru E-8 and 3/8 Drive E-10,E-12,E-14,E-16,E-18 TLS 648667 $ 2489 TLS 641509 $ 289 POWERBUILT® 3/8 Socket Rail • Holds 16 — 3/8 sockets. 1/2 Drive TLS 640856 $ 2189 WOBBLE EXTENSION SETS SOCKET ADAPTERS • Includes 3, 5 and 10 chrome vanadium extension bars • Operates at angles up to 25° from vertical 3/8 Drive TLS 640857 $ 1589 1/2 (F) x 3/8 (M) TLS 642500 $ 389 1/2 (F) x 3/4 (M) TLS 942501 $ 789 POWERBUILT® Socket Adapter Set 4-Piece Set TLS 640848 $ 789 12 TLS 642504 $ 1489 18 TLS 640853 $ 2389 24 TLS 640854 $ 3689 1/2 DRIVE RATCHETS 1/2 Drive Flex Handle Ratchet SPECIALTY HAND TOOLS SpecialtyHandTools POWERBUILT® Adjustable Wrenches • Extra thick 1 beam design WRENCHES 4 TLS 944039 $ 989 6 TLS 644040 $ 1089 8 TLS 644041 $ 1489 IRWIN® VISE-GRIP® Quick Adjusting Pipe Wrench • 2-1/4 jaw capacity • Ideal for pipe up to 1-1/2 diameter PET 274001SM $ 4499 POWERBUILT® Stubby Wrench Combo Set 7-Piece Set SAE Set • 3/8 to 3/4 TLS 640203 Metric SET • 10mm to 18mm TLS 640204 1/4 DRIVE RATCHETS 1/4 Drive 36-Tooth Quick Release Gear-to-Gear Ratchet TLS 640508 $ 1889 YOUR CHOICE $ 2589 EACH OTC® Chain Wrench • 13” handle with ½” to 4-3/4” capacity • Ratcheting head design allows user to turn in either direction without removing wrench from work OTC 7400 $ 6909 OTC® SOCKET SETS 5-Piece MORTORQ® Super Bit Socket Set • Approved for use on MORTORQ® Super Fasteners • Includes five popular sizes: MTS: 0, 1, 2, 3, 4 • Superior S2 material and durable design OTC 5933 $ 2599 8-Piece XZN “Super Short” Socket Bit Set • Short profile for fasteners in tight quarters • Includes sizes: 4, 5, 6, 8, 10, 12, 14 and 16mm • Use with internal square drive or external hex drive OTC 5942 $ 5439 1/2 Drive 45 Tooth Spin Disc Ratchet TLS 642505 $ 2189 1/2 Drive 36 Tooth Quick Release Gear-to-Gear Ratchet TLS 642509 $ 3789 3/8 Drive 72 Tooth Sealed Head Gear-to-Gear Ratchet TLS 649986 $ 2589
  14. 14. 14 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. SPECIALTY HAND TOOLS POWERBUILT® 82-Piece Tool Set 1/4, 3/8 1/2 Drive SAE/Metric Socket Wrench Set •1/4 drive: ratchet, 3 extension, 6 pt. SAE; 5/32 - 1/2 and Metric; 4mm - 13mm, deep well SAE; 1/4- 11/32, 12 pt. SAE; 3/16- 1/2 and Metric; 8mm - 13mm sockets. •3/8 drive: ratchet, 3 extension, 8 pt. SAE; 1/4, 5/16, 3/8, 12 pt. SAE; 3/8 - 13/16 and Metric; 9mm - 19mm; 6 pt. deep well SAE; 3/8 - 9/16 sockets and a 5/8 spark plug socket. •1/2 drive: ratchet, 12 pt. SAE; 1/2 - 7/8 sockets. •3/8 - 5/8 Combination wrenches and storage case. TLS 640076 $ 10789 EXTRACTOR SETS 6-Piece Set #1-#5 CPE 73414 $ 2189 CENTURY® Spiral Flute Extractor Set 6-Piece Set #1-#5 CPE 73215 $ 1589 6-Piece Set #1-#5 CPE 73415 $ 1489 CENTURY® Extractor Drill Set 10-Piece Set • Includes 5/64-17/64 quick cut-point drills and #1 - #5 spiral screw extractors CPE 88710 $ 2889 1/2 DRIVE IMPACT SOCKET SETS YOUR CHOICE $ 7989 YOUR CHOICE $ 9489 EACH EACH Metric Set •Includes 10 - 19mm, 21mm - 24mm, 27mm, 30mm, 32mm impact sockets, 5 impact extension, storage case. TLS 940838 SAE Set •Includes 5/16 - 1-5/16 impact sockets, 5 impact extension, storage case TLS 940837 SAE Set •Includes 3/8 - 1, deep well impact sockets TLS 647049 POWERBUILT® 1/2 Drive Deep Well Impact Socket Sets 11-Piece 6 pt. Set Metric Set •Includes 10mm -14mm, 16mm, 17mm, 19mm, 21mm - 24mm, deep well impact sockets TLS 647048 POWERBUILT® 1/2 Drive Impact Socket Sets 18-Piece 6 pt. Set POWERBUILT® 1/2 Drive Impact Adapter Universal Joint Set 7-Piece Set • Includes 1/4, 3/8 and 1/2 drive impact universal joints • 1/4 F x 3/8 M, 3/8 F x 1/4 M, 3/8 F x 1/2 M, and 1/2 F x 3/8 M impact adapters TLS 647095 $ 4789 1/2 (F) x 3/8 (M) TLS 647097$7.89 3/4 (F) x 1/2 (M) TLS 940586 $15.89 DEEP IMPACT SOCKET SETS DeWALT® 1/2 SAE Deep Impact Socket Set 7-Piece Set • Includes: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 SBD DWMT74448OSP $ 3845 DeWALT® 1/2 Metric Deep Impact Socket Set 7-Piece Set • Includes: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm SBD DWMT744490SP $ 3845 12-Piece Standard TORX® Socket Set • Includes the following sizes: 1/4 - T10,T15,T20,T25, T27,T30; 3/8- T40,T45,T47,T50,T55; 1/2 - T60 Disclaimer: Not rated for or to be used with impact tools OTC 6100 $ 4939 53-Piece Master TORX Bit Socket Set • Includes various sizes of TORX,TORX PLUS,Tamper Resistant TORX, Bit Sockets and External TORX Sockets in 1/4, 3/8 and 1/2 square drive • Packaged in hard plastic clamshell case for protection and organization Disclaimer: Not rated for or to be used with impact tools OTC 5900A-PLUS $ 10999 OTC® 9-Piece Power Driver Socket Extensions • 5/16 hex secures extension in your power tools collet • 1/4, 3/8 and 1/2 square drives attach to your standard and metric sockets • 2, 6 and 12 lengths let you control your tool application for any situation • Springloaded square drive ball bearing holds socket securely Disclaimer: Not rated for or to be used with impact drivers OTC 5943 $ 7999 OTC® SOCKET SETS CENTURY® 4-Piece File Set •Includes 6 mill bastard file, 6 round file, 6 X-slim taper file, handle and two inserts to fit all files included CPE 72470 $ 1489 CENTURY® 40-Piece SAE Tap Die Set • Sets include: 0 - 1/4 T-handle tap, 1/4 - 1/2 T-handle tap wrench, 0 - 1 adjustable tap wrench, 1 adjustable die stock, pitch gauge, and screwdriver • NC Dies: 4-40, 6-32, 8-32, 12-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 • NF Dies: 10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20 and NPT 1/8-27 CPE 98900 $ 11999 NEW
  15. 15. FINANCE ITFINANCE IT For more information, contact your local delivery store. 15 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. ToolStorage SPECIALTY HAND TOOLS CENTURY® BI-METAL COBALT HACKSAW BLADES Fine 12 x 32T CPE 04032 $3.89 Medium 12 x 24T CPE 04024 $3.89 Coarse 12 x 18T CPE 04018 $3.89 Fine 12 x 32T CPE 04432 $2.89 Medium 12 x 24T CPE 04424 $2.99 Coarse 12 x 18T CPE 04418 $3.89 WIRE SERVICE Mag-Torch 3-in-1 Butane Torch • Compact table-top torch can be used in a variety of applications MGT MT780 $ 3399 Mag-Torch Butane Cylinder 5.6 oz MGT MT150B-4 $4.99 TIRE/WHEEL SERVICE OTC® Hands Free Air Chuck Makes Bead-Seating a One-Man Job! • Perfect for applications where the tire valve is facing the floor while seating the tire bead, such as most dual wheel configurations • Hooks on the top bead seat of the wheel and the spring pressure holds the chuck on the tire valve pointing to the opposite side • Ball valve included to allow inflation only when needed OTC 5745 $ 6999 5/32 X 8-Spiral Cut CPE 04072 $2.89 3/16 X 8-Spiral Cut CPE 04073 $2.89 7/32 X 8-Spiral Cut CPE 04074 $2.99 CENTURY® CHAINSAW FILES TOOL STORAGE GRAY TOOLS PRO+ SERIES • Heavy-duty 100 lbs. bearing slides standard on all drawers. • Completely redesigned locking system with tubular key. • Smooth and quiet rolling premium 5”x 2”casters with precision sealed bearings and 360º top brake • Chrome plated cast drawer handles • Drawer liners included on all models • Dual metal rear drawer locking hook for positive locking • Automotive style powder coat paint finish for superior scratch and chemical resistance A A B D B C 6 Drawer Top Chest - PRO+ Series 26 x 16 x 16-1/8 • Capacity: 4,654 cu. in. GRY 93106 $ 54999 9 Drawer Top Chest - PRO+ Series 26 x 18-3/4 x 21 • Capacity: 7,130 cu. in. GRY 93109 $ 69799 C 9 Drawer Top Chest - PRO+ Series 41-1/2 x 18-1/2 x 23-1/2 • Capacity: 10,841 cu. in. GRY 93119 $ 121999 D 15 Drawer Roller Cabinet - PRO+ Series 42 x 19 x 43-1/2 • Capacity: 17,465 cu. in. GRY 93215 $ 176899 26 Tool Top Chests 42 Tool Top Chest and Roller Cabinet
  16. 16. FINANCE IT FINANCE IT 16 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. B A TOOL STORAGE D D E F E F C 28 Roller Cabinet – 7 Drawers 28 x 18 x 40 42 Top Chest – 8 Drawers 42 x 18 x 18 42 Roller Cabinet – 12 Drawers 42 x 18 x 41 GRAY TOOLS PRO+ SERIES DYNAMICS TOOLS • Heavy-duty 100 lbs. bearing slides standard on all drawers. • Completely redesigned locking system with tubular key. • Smooth and quiet rolling premium 5”x 2”casters with precision sealed bearings and 360º top brake • Chrome plated cast drawer handles • Drawer liners included on all models • Dual metal rear drawer locking hook for positive locking • Automotive style powder coat paint finish for superior scratch and chemical resistance A C B 12 Drawer Top Chest - PRO+ Series 26 x 18-3/4 x 21 11 Drawer Roller Cabinet - PRO+ Series 26-1/2 x 19 x 42 5 Drawer Roller Cabinet - PRO+ Series 26-1/2 x 19 x 36 26 Tool Top Chest 26 Rolling Tool Cabinets • Capacity: 6,997 cu. in. • Capacity: 11,307 cu. in. • Capacity: 9,316 cu. in. GRY 93120 $ 84999 GRY 93211 $ 121999 GRY 93250 $ 88499 • All drawers feature ball bearing slides for smooth operation • Easy to clean powder coat paint finish • Drawer liners included • Needle bearing casters with 360º brake • Heavy-duty steel construction • Load capacity per drawer is 88 lbs • Net weight: 129 lbs • Capacity: 8,881 cu. in. • All drawers feature ball bearing slides for smooth operation • Easy to clean powder coat paint finish • Drawer liners included • Heavy-duty steel construction • Load capacity per drawer is 88 lbs • Net weight: 123 lbs • Capacity: 7,831 cu. in. • All drawers feature ball bearing slides for smooth operation • Easy to clean powder coat paint finish • Drawer liners included • Needle bearing casters with 360º brake • Heavy-duty steel construction • Load capacity per drawer is 88 lbs • Net weight: 220 lbs • Capacity: 13,378 cu. in. GRY D069201 $ 74199 GRY D069204 $ 75999 GRY D069203 $ 122999
  17. 17. WORKFORCE™ SERIES For more information, contact your local delivery store. 17 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. 1/2 AIR IMPACTS 1/2 AIR IMPACTS CP 1/2 Extreme Torque Impact Wrench CP 1/2 Lightweight Impact CP 3/4 Air Impact CP 1/2 General-Duty Impact AIR TOOLS CP 3/8 Reversible Angle Air Drill • Compact,low profile head for confined areas • Reverse valve for easy directional changes • Teasing throttle for control from start-up through run-down Free Speed: 1,800 RPM CP CP879 $ 14889 • Differential regulator matches the required power to the job • Imported oil bath DynaPact™ clutch. Ultimate Torque: 425 ft.-lbs. CP CP734H $ 21899 CP 1/2 Super-Duty Impact • Oil bath Spring Hammer clutch mechanism for ultimate power, high durability and reduced vibration • One hand push button forward/reverse power regulator • Differential regulator with four positive power settings in forward and ultimate power in reverse Ultimate Torque: 610 ft.-lbs. CP CP749 $ 28999 • Composite housing features an aluminum back cap support • Thermoplastic rubber injected grip for comfort and durability Ultimate Torque: 922 ft.-lbs. CP CP7748 $ 25189 • Lightweight, only 3.95 lbs. and Compact size, 6.7 • Powerful with 955 ft.-lbs. of working torque • Comfortable, curved rubber injected thermo plastic handle • Features a power setting system with 1-hand operation behind the trigger Ultimate Torque: 955 ft.-lbs. CP CP7749 $ 29989 • Powerful performance and durability in a compact package • Twin hammer clutch for power and durability Ultimate Torque: 1,200 ft.-lbs. CP CP7763 $ 56999 COMPACT AIR IMPACTS CP Compact Stubby Impacts CP Ultra Compact Stubby Impacts • Compact and powerful at only 2.9 lbs. • 4.4 in length • Power and durability at 9,000 RPM • 3 power settings in forward reverse • Easy one-handed operation 3/8 Maximum Torque: 345 ft.-lbs. CP CP7731C • Compact and powerful at only 2.2 lbs. • Power and durability at 9,000 RPM • 4 power settings in forward reverse • Easy one-handed operation • 4.3 in length 3/8 Ultimate Torque: 415 ft.-lbs. CP CP7731 1/2 Ultimate Torque: 425 ft.-lbs. CP CP7732 YOUR CHOICE $ 19889 1/2 Maximum Torque: 460 ft.-lbs. CP CP7732C YOUR CHOICE $ 19889 EACH EACH Carquest® 1/2 Heavy-Duty Impact • Twin hammer clutch • Force feed lubrication • Cushion grip • Variable speed trigger control • Adjustable power regulatorUltimate Torque: 425 ft.-lbs. EQP 7418 $ 17689 ProValue™ 1/2 Impact • Features durable swinging weight clutch mechanism Ultimate Torque: 275 ft.-lbs. EQP 2374-PV $ 11189 3/4 AIR IMPACTS CP 3/4 Heavy-Duty Impact • One-hand push button forward/reverse regulator • Comfortable contoured handle grip Ultimate Torque: 1,000 ft.-lbs. CP CP772H $ 52999 CP 3/4 Air Impact • Includes ring retainer plus additional hole retainer • Lightweight composite housing • Simple one handed forward reverse switch (S2S) Ultimate Torque: 1,440 ft.-lbs. CP CP7769 $ 66999 Flexzilla® 1/2 Pro Mini Impact Wrench Kit • Includes Flexzilla Pro Mini Impact Wrench, field repairable 3/8 x 50' Flexzilla Pro Air Hose, and Flexzilla High Flow Couplers and Plugs • 800 ft-lbs. of breakaway torque and lightweight, compact design LEG AT8505FZ $ 35999 DeWALT® 1/2 Heavy-Duty Air Impact Wrench • One-hand operation-forward/reverse switch • Shock resistant housing bumpers help prevent scuffing Ultimate Torque: 650 ft.-lbs. SBD DWMT70773L $ 24999 DeWALT® 1/2 Medium-Duty Air Impact Wrench • Heavy duty twin-hammer mechanism • Composite body with shock resistant housing bumpers to prevent scuffing • Adjustable power regulator Ultimate Torque: 600 ft.-lbs. SBD DWMT70774 $ 16825 NEW AirTools
  18. 18. WORKFORCE™ SERIES 18 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. AIR TOOLS ProValue™ 3/8 Air Ratchet CP 3/8 Heavy Duty Ratchet 3/8 AIR RATCHETS • Ergonomic square handle for positive comfort grip • Teasing throttle for precise speed control • Free Speed: 160 RPMMaximum Torque: 60 ft.-lbs. EQP 2328-PV $ 7589 • Features anti-slip head design • Compact design weighing 1 lb. Ultimate Torque: 50 ft.-lbs. CP CP828 $ 17689 ProValue™ Rear Exhaust Die Grinder AIR GRINDERS AIR GRINDERS CP Compact Angle Die Grinder CP Standard-Duty Die Grinder • Excellent for tire scuffing, cleaning tire moulding, and general high-speed polishing and grinding Free Speed: 22,000 RPM CP CP872 $ 9189 • Standard safety lever • Variable speed throttle control Free Speed: 22,000 RPM EQP 2320-PV $ 4589 • Complete with 1/4 6mm collet • Built-in air regulator Free Speed: 22,500 RPM CP CP875 $ 8999 CP Pistol Grip Air Hammer 3,000 Blows Per Minute CP CP7111 $ 8489 CP Air Hammer Kits • Both include a heavy-duty pistol grip air hammer, standard .401 round shank, with teasing trigger for slow start-up • Moulded case CP7150K with 5 Chisels 2,300 Blows Per Minute CP CP7150K $ 11299 CP7110K with 4 Chisels and Posi-Lock Retainer 3,200 Blows Per Minute CP CP7110K $ 14189 • Standard .401 round shank • Easy change retainer for quick accessory change • Touch trigger for precision start and total control CP860 Heavy-Duty Die Grinder • Features an energy-efficient 1/2 hp motor • Rear exhaust directs air away from work • Square handle design for positive grip • Complete with 1/4 6mm collet Free Speed: 24,000 RPM CP CP860 $ 20739 CP Mini Straight Die Grinder • Features an easy access speed control and insulated grip Free Speed: 28,000 RPM CP CP9105Q-B $ 11789 CP Mini Angle Die Grinder • Powerful 1/4-HP die grinder with rear exhaust • Easy access speed regulator Free Speed: 23,000 RPM CP CP9106Q-B $ 12189 CP 120° Angle Die Grinder Free Speed: 23,000 RPM CP CP9108Q-B $ 14389 CP 1/4 Drive Standard Duty Ratchet • Square handle design for positive grip • Durable improved ratchet head with a convenient forward/reverse button for easy operation • Ball-type socket retainer for positive retention Maximum Torque: 15 ft.-lbs. CP CP825 $ 19999 Carquest® Gearless Angle Die Grinder • 1/4 Collet capacity • Tool accepts 1/4 3mm and 6mm arboursFree Speed: 25,000 RPM EQP 7446 $ 8499 Carquest® Angle Die Grinder • Features a teasing throttle with built-in power regulator Free Speed: 20,000 RPM EQP 7448 $ 8189 AIR HAMMERS ProValue™ Heavy-Duty Air Hammer ProValue™ 4-Piece Heat Treated Chisel Set EQP 2550-PV $21.89 • Accepts all standard .401 shank tool bits • Independent power regulator and teasing trigger for operator control 3,500 Blows Per Minute EQP 2375-PV $ 3189 Flexzilla® Pro Reactionless Mini Air Ratchet Kit • Includes 3/8 Flexzilla® Pro Reactionless MiniAir Ratchet,Flexzilla® Pro Custom Length Whip Hose with High Flow Ball Swivel,and Flexzilla® Pro High Flow Couplers and Plugs • Built-in air regulator and rear exhaust • High speed: 650 RPM •Torque: 45 ft-lbs LEG AT8535FZ $ 20999 CP Heavy Duty Extended Grinder • Highly efficient and powerful • Ideal for limited space applications • High operator comfortFree Speed: 28,000 RPM CP CP9110Q-B $ 13999 1/4 DeWALT Straight Die Grinder • Self-locking touch control trigger with cushion grip body Free Speed: 25,000 RPM SBD DWMT70783 $ 6249 NEW
  19. 19. WORKFORCE™ SERIES For more information, contact your local delivery store. 19 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. PLEWS® BLOW GUNS Tru-Flate 1/4 FNPT Input Safety Blowgun • Oil resistant, soft rubber tip seals tight and won’t mar finishes • With safety nozzle nozzle connected, limits air pressure to 30 psi CPM 18-215 $ 629 Plastic Pistol Grip Blowgrun • Lightweight plastic with ergonomic design • Brass valving and bushing ensure long life CPM 18-325 $ 329 MILTON® BLOW GUNS Siphon Spray Blow Gun Kit • 1/4 national pipe thread air inlet • Maximum working pressure of 150 PSI • 14 standard cubic feet per minute at 100 PSI • Buna-N seal MIL S157 $ 2699 1/4 NPT Lever Style Blow Gun 4' Extension CPM 18-219 $ 5450 2' Extension MIL 158 $ 3299 AIR TOOLS DeWALT Air Chisel Hammer • Medium barrel design with shock resistant housing bumpers and ergonomic handle • Comes with an assortment of chisels 2,600 Blows Per Minute SBD DWMT70785 $ 6249 NEW AIR HAMMERS CP Dual Action 6 Air Sander • Rotary and orbital motion for rapid removal as well as fine finishing Max RPM: 10,000 CP CP870 $ 9389 CP Heavy Duty Dual-Piston In-line Sander • Twin piston for smooth balanced power • Power to prevent stalling during heavy material removal • CP Pinch guard for safe operation Free Speed: 3000 strokes per minute CP CP7268 $ 16989 AIR SANDERS CP 7200-S Mini Random Orbital Sander Kit • Kit includes CP7200 random orbital sander, (1) 2 and 3 backing pads, (10) 2 320, 400 and 600 grit sand paper, (10) 3 320, 400 and 600 grit sand paper and spindle key CP CP7200S $ 15999 CP7255 6 Random Orbital Air Sander • Powerful .28 HP motor • Teardrop handle for great control • Low vibration • Easy access speed control CP CP7255 $ 23789 AIR NEEDLE SCALERS CP Mini Polisher Kit • Kit includes mini disc polisher plus (1) 3 backing pad, (2) 3-1/2 foam compounding pads (white/ yellow), (1) 3-1/2 wool buffing pad and spindle wrench packed in a heavy-duty carrying case CP CP7201P $ 18189 CP Needle Scaler • Adjustable for easier operation • Durable and versatile for vehicle and manufacturing equipment maintenance • Ideal tool for material removal on medium to large surfaces 4,000 Blows Per-Minute CP CP7125 $ 26969 Socket Retainer Ring CP CA088097 $5.69 Airolene Oil 591 mL CP CA000046 $11.89 AIR RECIPROCATING SAWS Contractor Bi-Metal Blades 6TX6 CPE 07606 $3.99 18TX6 CPE 7618 $2.99 24TX6 CPE 07624 $5.89 High Speed Steel Blades 14TX4 CPE 07814 $2.99 18TX6 CPE 07865 $2.49 24TX6 CPE 07866 $2.99 CENTURY® Reciprocating Saw Blades RECIPROCATING SAW BLADES CP Heavy-Duty Reciprocating Saw • Compact and lightweight for all general cutting • Adjustable guard guide • Includes 18T, 28T, 32T replacement blades • 3/8 stroke length CP CP7900 $ 18449 Flexzilla® Pro Reciprocating Mini Air Saw Kit • Includes Flexzilla® Pro Reciprocating Mini Air Saw, Flexzilla® Pro Custom Length Whip Hose with High Flow Ball Swivel, and Flexzilla® Pro High Flow Couplers and Plugs • Compact design with low vibration • High Speed: 9500 SPM LEG AT8565FZ $ 22999 • Maximum working pressure of 150 PSI • Safety nozzle offers 10.5 SCFM @ 100 PSI • Rubber tip offers 11.6 SCFM @ 100 PSI AirTools
  20. 20. FINANCE IT FINANCE IT 20 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. Milton® 1/4 NPT Polycarbonate Mini Piggyback FR Duo • 1/4 national pipe thread • Maximum 20 standard cubic feet per minute • Operating temperature range of 40 degrees Fahrenheit to 120 degrees Fahrenheit • Maximum working pressure up to 150 pounds per square inch • Polycarbonate bowl MIL S1142 $ 7999 MILTON® NPT FRL REGULATORS • Relieving type and offers a stable downstream air pressure over a wide range of air flows with accurate control, fast response time and minimal pressure drop • Maximum inlet pressure of 250 PSI and offers up to 50 SCFM • Maximum of 50 (1113),80 (1114) and 100 (1115) std.cubic feet per minute at 100 PSI 1/4 MIL 1113 $ 5999 1/2 MIL 1115 $ 6999 3/8 CPM 24-414 $ 12043 MILTON® NPT MINI PRESSURE REGULATORS 1/4 MIL S1146 $ 4539 Heavy Duty 1/4 MIL S1145 $ 3999 3-Gallon Light-Duty Air Compressor Oil Free, Low Maintenance Operation - 120 Volt - UL CSA Certification ASME Certified Tanks (3 to 20-Gallon) Great for Home DIY Projects! Toll Free Help Line 1-888-895-4549 Toll Free Help Line 1-888-895-4549 1 Year Limited Warranty Residential Use • 125 Max PSI • 1.0 RHP • 3.0 CFM@40 PSI • 2.0 CFM@90 PSI • Air Pressure Regulator, Gauges Quick-Connect COM VPP1080318 $ 18999 90 Day Limited Warranty Commercial Use MEDIUM-DUTY AIR COMPRESSORS Cast Iron - Twin Cylinder - Belt Drive - Oil Lubricated - Oil Level Sight Glass - ASME Certified Tanks 20-Gallon • 135 Max PSI • 1.6 RHP • 6.2 CFM@40 PSI • 5.3 CFM@90 PSI • 120/240 Dual Volt • Air Pressure Regulator, Gauges and Quick-Connect COM PP1682066.MN $ 64999 30-Gallon • 155 Max PSI • 1.6 RHP • 6.2 CFM@40 PSI • 5.3 CFM@90 PSI • 120/240 Dual Volt • Air Pressure Regulator, Gauges Quick-Connect COM PLA1683066 $ 80999 60-Gallon • 155 Max PSI • 3.7 RHP • 13.4 CFM@40 PSI • 11.5 CFM@90 PSI • 240 Volt COM PLA3706056 $ 86989 On All Medium- Duty Compressors 2 Year Limited Warranty Residential Use 90 Day Limited Warranty Commercial Use AIR COMPRESSORS Voltage Codes 1 = 115/60/1 3 = 230/60/1 21 = 115/230/60/1 43 = 208/230/60/3 45 = 460/60/3 69 = 575/60/3 77 = 208/230/460/60/3 MS = Magnetic Starter ASME Approved Air Receivers, Cast Iron Compressor Pump,Totally Enclosed OSHA Belt Guard, Unloaded Starting, Ball Valve Air Outlet, Splash Lubrication 2-Year Warranty SDI - STANDARD DUTY INDUSTRIAL AIR COMPRESSORS * Contact your local store for pricing and availability * Contact your local store for pricing and availability Line Code Item Number SCFM @ Max. Pressure HP Voltage/Phase Tank Capacity (Gallons) H (Horiz.) V (Vertical) DVR IS5-10080H-03 18 SCFM @ 150 PSI 5 HP 230/60/1 80G H DVR IS5-10080V-03 18 SCFM @ 150 PSI 5 HP 230/60/1 80G V DVR IS5-4060-03 13 SCFM @ 125 PSI 5 HP 230/60/1 60G V DVR IS5-5580-03 15.4 SCFM @ 150 PSI 5 HP 230/60/1 80G V DVR IS7-10080-03 22.7 SCFM @ 150 PSI 7.5 HP 230/60/1 80G V DVR IS7-100120-03 22.7 SCFM @ 150 PSI 7.5 HP 230/60/1 120G H DVR IS10-100120-69 31 SCFM @ 150 PSI 10 HP 575/60/3 120G H 7-Year Warranty HDI - HEAVY-DUTY INDUSTRIAL PISTON AIR COMPRESSORS Line Code Item Number CFM@ 150 PSI HP Voltage/Phase Tank Capacity (Gallons) H (Horiz.) V (Vertical) DVR TAPV-5052-03MS 19.8 CFM 5 HP 230/60/1 80G V DVR TAPV-5052-69MS 19.8 CFM 5 HP 575/60/3 80G V DVR TAS-5052-03MS 25.9 CFM 7.5 HP 230/60/1 80G H DVR TASV-5052-03MS 25.9 CFM 7.5 HP 230/60/1 80G V DVR VAV-5062-69MS 52.1 CFM 15 HP 600/60/3 120G H Available with or without mounted and wired magnetic starter. Optional constant RUN-STOP-START controls. Duplex and other custom products available. Gas Powered Air Compressor DVR TASE-5030 25.9 CFM 13 HP Gas 30G H • 1/4 national pipe thread • 1/8 national pipe thread gage ports • Low Pressure • Maximum inlet pressure of 250 PSI • 25 standard cubic feet per minute
  21. 21. WORKFORCE™ SERIES WORKFORCE™ SERIES For more information, contact your local delivery store. 21 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. AirCompressors AIR HOSE REELS Flexzilla® Open Face, Retractable Air Hose Reel with Hose • Features all steel construction and a multi-position guide arm • Four-way direction rollers allows the hose to be easily pulled from the reel 3/8 x 50', 1/4 NPT LEG L8611FZ $ 30999 3/8 x 50', 1/4 NPT CPE 31678 $ 3189 3/8 x 25', 1/4 NPT CPE 31677 $ 2589 1/4 x 25', 1/4 NPT CPE 31675 $ 1799 Carquest® Heavy-Duty Rubber Air Hose Max 200 PSI 1/4 x 25', 1/4 NPT CPE 31660 $ 1999 3/8 x 25', 1/4 NPT CPE 31662 $ 3099 1/4 x 50', 1/4 NPT CPE 31661 $ 4599 1/2 x 25', 1/2 NPT CPE 31664 $ 3999 1/2 x 50', 1/2 NPT CPE 31665 $ 7349 3/8 x 50', 1/4 NPT CPE 31663 $ 5189 Carquest ® Professional Rubber Air Hose Max 250 PSI FLEXZILLA ® AIR HOSES 3/8 x 25', 1/4 NPT LEG HFZ3825YW2 $ 2989 • Flexible hybrid polymer material, extreme all-weather flexibility (-40° to 140°F), won't kink under pressure 1/2 x 50', 3/8 NPT LEG HFZ1250YW3-N $ 8989 3/8 x 50', 1/4 NPT LEG HFZ3850YW2-N $ 6689 3/8 x 25', 1/4 NPT LEG HFZP3825YW2 $ 5189 Flexzilla® Pro Air Hoses • Field repairable – Reusable anodized aircraft aluminum fittings • Extreme all-weather flexibility (-40° to 140°F) 3/8 x 50', 1/4 NPT LEG HFZP3850YW2 $ 7899 LINCOLN® ALL-STEEL HOSE REELS • Features: all steel construction, spring-powered automatic recoil, 5-position adjustable outlet arm • 8-position ratchet gearing locks the reel at the desired hose length • Ball stop included 50' x 3/8 LIN 83753 $ 19299 50' x 1/2 LIN 83754 $ 21779 ZillaReel™ PRO with Levelwind™ • Features a Latching Mode Switch which allows user to choose from latching the hose every 3 ft.or switching to free run • Includes a 7-position locking bracket PRO 3/8 x 75', 1/4 NPT LEG L8306FZ $ 37999 MILTON® AIR PRESSURE GAUGES Dual Head Chuck Service Gauges • Plated brass tube and 4-sided nylon indicator bar • Max pressure of 160 PSI MIL S976 $ 2899 MIL S986 $ 3299 CARQUEST® AIR HOSES Straight Head Bayonet Style • 1/4 NPT with white nylon indicator bar • 12 hose with 10 - 120 PSI • Hose whips are interchangeable with Milton bayonet gauge MIL S520 $ 5959 3/8 x 25', 1/4 NPT LEG HWF3825BL2 $ 2499 3/8 x 50', 1/4 NPT LEG HWF3850BL2 $ 3759 1/4 x 25' 1/4 NPT LEG HWF1425BL2 $ 2499 1/4 x 50'1/4 NPT LEG HWF1450BL2 $ 3689 LEGACY WORKFORCE® BLUE PVC AIR HOSE • Oil and abrasion-resistant outer cover • Temperature range 15° to 150°F • Twin spiral braiding • Corrosion resistant brass fittings • 350 Max PSI PRO 3/8 x 50', 1/4 NPT LEG L8305FZ $ 30999 • Automatically layers hose back and forth across the reel and the Latching Mode Switch allows user to choose from latching the hose every 3 ft. or switching to free run • Includes a 7-position locking bracket • Can also be portable with the built-in handle and free- standing base • 350 PSI working pressure • 3 ft. lead-in hose is included • Made from durable UV stabilized polypropylene LEG L8310 $ 30999 LEGACY™ LEVELWIND™ 3/8 x 100' Retractable Air Hose Reel with PVC Hose Included ZILLA™AIR HOSES REELS Flexzilla® Enclosed Plastic Retractable Air Hose Reel with Hose •Auto Retract/Latch Hose Mechanism - Simplifies every job by keeping excess hose out of the work space 3/8 x 50', 1/4 NPT LEG L8250FZ $ 17489 • Comes pre loaded with Premium FLEXZILLA® air hose. Inflator Gauges • Full swivel chuck with 15 hose • Range: 10—160 PSI Dual Head Chuck MIL S506 $ 5999 Straight Foot Dual Head Chuck MIL S516 $ 6499 Dual Head Chuck Bayonet Style MIL S522 $ 4999 MILTON® NPT FRL MICRO FILTERS • Includes a porous bronze sintered 40 micron filter element • Maximum pressure of 150 PSI • Install upstream from regulators • Maximum of 48 std. cubic feet per minute at 100 PSI 1/4 Polycarbonate MIL 1018 $ 5699 3/8 Polycarbonate MIL 1019 $ 5699 1/2 Polycarbonate MIL 1020 $ 6999 PLEWS® COUPLERS AND AIR CHUCK Couplers 1/4 ARO 1/4 MNPT Coupler CPM 13-324 $11.99 1/2 T-Style 1/2 FNPT Coupler CPM 13-713 $10.99 Ball Foot Air Chuck CPM 17-353 $6.89
  22. 22. FINANCE IT 22 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. PLEWS® AIR HOSE PLUGS AND FITTINGS Plugs 1/4 MNPT 1/4 I/M Plugs 2 Pack CPM 12-225-2 $3.29 1/4 FNPT 1/4 I/M Plugs 2 Pack CPM 12-235-2 $3.29 1/4 FNPT 1/4 ARO Plugs 2 Pack CPM 12-335-2 $3.29 1/4 MNPT 1/4 ARO Plugs 2 Pack CPM 12-325-2 $3.39 HI FLO® 1/4 MNPT Plugs 10 pack CPM 12-924 $2.99 1/4 T Style 1/4 MNPT Plugs 2 Pack CPM 12-125-2 $3.39 3/8 T Style 3/8 MNPT Plugs 2 Pack CPM 12-603-2 $3.39 Hose Fittings Barb, 1/4 ID x 1/4 MNPT CPM 21-123 $2.29 1/4 ID Hose Splicer CPM 21-423 $2.99 3/8 ID Hose Splicer CPM 21-467 $2.99 POWER TOOLS POWER IMPACTS POWER GRINDERS Milwaukee® M18 FUEL™ 1/2 High Torque Impact Wrench With Friction Ring Kit • Kit includes: M18 1/2 High Torque Impact Wrench, (2) REDLITHIUM™ batteries and M18/M12 Dual Voltage Charger • Up to 1,400 ft-lbs. of nut-busting torque • Features friction ring to ensure quick and easy socket changes • 4-mode drive control with bolt removal mode MLK 2767-22 $ 71428 ITC® Heavy-Duty 1/2 Electric Impact Wrench • Motor: 120V, 7 Amps • 4 impact sockets: 11/16, 3/4, 13/16 and 7/8 • Impact rate: 2700 BPM • Maximum torque: 230 ft/lbs JET 011903 $ 16999 Milwaukee® M18 FUEL™ ONE-KEY™ High Torque 3/4 Impact Wrench With Friction Ring Kit • Includes M18 FUEL™ ONE-KEY™ High Torque 3/4 Impact Wrench, (2) M18™ RED LITHIUM Extended Capacity Batteries, Multi-Voltage Charger and Hard Case • Delivers up to 1200 ft/lbs of fastening torque, 1500 ft/lbs of nut- busting torque • ONE-KEY™ technology allows users to customize, track and manage tool’s performance and location • Friction ring design ensures quick and easy socket changes MLK 2864-22 $ 80356 Milwaukee® M18 FUEL™ ONE-KEY™ High Torque 1/2 Impact Wrench With Friction Ring Kit • Includes M18 FUEL™ ONE-KEY™ High Torque 1/2 Impact Wrench, (2) M18™ RED LITHIUM Extended Capacity Batteries, Multi-Voltage Charger and Hard Case • Delivers up to 1000 ft/lbs of fastening torque, 1 400 ft/lbs of nut-busting torque • ONE-KEY™ technology allows users to customize, t rack and manage tool’s performance and location • Friction ring design ensures quick and easy socket changes MLK 2863-22 $ 78035 Milwaukee® M18 FUEL™ ONE-KEY™ High Torque 3/4 Impact Wrench With Friction Ring • Delivers up to 1200 ft/lbs of fastening torque, 1500 ft/lbs of nut-busting torque • ONE-KEY™ technology allows users to customize, track and manage tool’s performance and location • Friction ring design ensures quick and easy socket changes NOTE: Battery not included MLK 2864-20 $ 47053 NEW NEW NEW NEW DeWALT® 4-1/2 Small Angle Grinder With One-Touch™ Guard • Includes 2-position side handle and depressed centre wheel • One-Touch™ Guard and hex wrench • No Load Speed of 12,000 rpm • 7.0 AC/DC Amps SBD DWE4011 $ 10095 ITC® 5 Angle Grinder • Motor: 120 volt, 8 amps • 5/8-11 tpi arbour.No-load speed: 11,000 rpm JET 011707 $ 8989 ITC® 4-1/2 Angle Grinder • Motor: 120 Volt, 4.3 Amps. 5/8–11 tpi arbour No load speed: 11,000 RPM JET 011704 $ 5859 Milwaukee® 1-5/8 Electromagnetic Drill Kit • Includes 1-5/8 Electromagnetic Drill Kit, Safety Strap, Lubrication Spray Bottle, Chuck Key, 3/4 Weldon to 1/2 Chuck adapter, (2) 1 retractable pilot pins and Hard Carrying Case • 13A motor delivers fast drilling with annular cutters or twist drill bits • 2-speed gear box: 475/730 RPM MLK 4272-21 $ 156249 POWER DRILLS DeWALT® 20V MAX 1/2 Compact Drill Driver Kit • Includes (1) 1/2 Compact Drill/ Driver, (2) 20V MAX Batteries, (1) Battery Charger and Contractor Bag • 2-speed - 450 and 1,500 RPM • 1/2 single sleeve ratcheting chuck SBD DCD771C2 $ 24038
  23. 23. For more information, contact your local delivery store. 23 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. M18™ RED LITHIUM™ XC5.0 Extended Capacity Battery Pack Single Pack MLK 48-11-1850 $ 20535 PowerTools BENCH GRINDERS MILWAUKEE® BATTERY PACKS NEW NEW NEW NEW NEW Milwaukee® M18 FUEL™ 4-1/2/5 Grinder With Slide Switch Lock-On • Delivers maximum power and up to 10X longer motor life • Slide switch reduces user fatigue • Compatible with all M18 batteries NOTE: Battery not included MLK 2781-20 $ 28571 Milwaukee® M18 FUEL™ 4-1/2/5 Grinder With Slide Switch Lock-On Kit • Includes M18 FUEL™ 4-1/2/5 Grinder, (2) M18™ RED LITHIUM Extended Capacity Batteries, Multi-Voltage Charger, Spanner Wrench,Wheel Guard, Flange Nuts and Hard Case • Delivers maximum power and up to 10X longer motor life • Slide switch reduces user fatigue MLK 2781-22 $ 62499 POWER GRINDERS Milwaukee® M12 FUEL™ 3/8 Cordless Ratchet • Up to 55 ft/lbs max. torque • Delivers 200 RPM for increased productivity • Recessed head profile for access in tight spaces MLK 2557-20 $ 25267 DeWALT® 7 / 9 Variable Speed Polisher with Soft Start • Powerful 12A motor with electronic control • Non-mar rubber gear case reduces surface imperfections • 1,250 Max Watts Output • Wool ingestion shield increases tool life • Comes with Professional Velcro Polishing Pad • No Load Speed of 0-600 / 0-3,500 SBD DWP849X $ 36538 Carquest® 7 Variable Speed Electric Polisher • Spindle Size: 5/8 - 11, Variable Speed: 1,000 - 3,000 RPM EQP 7452 $ 16999 POWER TOOLS DeWALT® 8 Bench Grinder • 3/4HP 600 RPM induction motor • Rear exhaust ports in wheel guards • Cast iron base and housing • Precision-machined aluminum tool rests SBD DW758 $ 21923 JET® Heavy Duty Bench Grinder • Steel wheel covers with rear dust exhaust ports • Eye shields and spark guards for operator safety • Includes coarse and medium grinding wheels • CSA electrics 6” 1/3 HP - JET 240153 $ 19299 8” 1/2 HP - JET 240154 $ 25799 Two Pack MLK 48-11-1852 $ 30356 M18™ RED LITHIUM™ HIGH DEMAND™ 9.0 Battery Pack MLK 48-11-1890 $ 30356 M12™ RED LITHIUM™ XC6.0 Battery MLK 48-11-2460 $ 14285 HIGH SPEED DRILL BIT SETS CENTURY® 13-Piece Cobalt Drill Bit Set • Extremely heat resistant • Must be used and operated in power units that have a RPM speed of 1500 or more for maximum efficiency • Includes: 1/16 - 1/4 bits CPE 26513 $ 4789 CENTURY® 135° Quick Cut Points 21-Piece High Speed Bit Set • Includes: 1/16 - 23/64 bits CPE 88721 $ 3589 29-Piece High Speed Bit Set • Includes: 1/16 - 1/2 bits CPE 88729 $ 7789 • Self-centreing • Penetrate faster with less pressure • Will not walk or wander at the starting surface CENTURY® 5-Piece Left Hand Drill Bit Set • Includes 1/8 to 3/8 • Stubby mechanics length drill bit for additional strength CPE 74105 $ 1999 CENTURY® Cobalt Drill Bits 1/8 CPE 26408 $2.89 3/16 CPE 26412 $3.89 1/4 CPE 26416 $4.89 M18™ RED LITHIUM™ XC5.0 Starter Kit • Includes M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery and Multi-Voltage Charger MLK 48-59-1850 $ 26785 DeWALT® 18/20V MAX Cordless/Corded Wet-Dry Vac • HEPA rated wet/dry filter traps dust with 99.97% efficiency at 0.3 microns • 2-gallon capacity wet or dry • Includes on-board hose,cord and accessory storage SBD DCV581H $ 20191
  24. 24. 24 Offers valid March 28, 2019 - June 26, 2019 * Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services. Electronic Supplies Professional Infrared Thermometers EST-65 • Reads surface temps up to 1022° F and 550° C • Built-in laser pointer and backlit LCD display • Resolution is 0.1 degrees • Includes carrying case. ESI EST-65 $ 9999 EST-67 • Features a twin laser aiming system for more accurate results - lasers converge at optimum measuring distance • Reads temps up to 1112° F and 600° C • Includes carrying case. ESI EST-67 $ 9869 Infrared Thermometer MTP-1325 • Single laser targeting • Automatic data hold, auto power off • White backlit LCD display • Range of -50 to 450°C (-58 to 842°F) and ratio of 12:1 MTP MT1325 $ 11299 INFRARED THERMOMETERS MULTIMETERS Electronic Specialties Deluxe Automotive Meter • Includes two sets of test leads, RPM pick-up, temperature probe and soft storage case • Features analogue bar graph,12 testing functions and 45 test ranges •Auto-ranging on DC/ACVolts and Ohms. ESI 585K $ 11999 Automotive Hybrid Multimeter Kit • New Hybrid safety voltage standard 1000V CAT III • Measurement functions include, DC / AC Voltage, DC / AC Current (up to 20A), Resistance, Dwell Angle, Frequency, Capacitance, RPM (TACH), Duty Cycle, Temperature (k), and Pulse Width MTP MT1551 $ 17999 OTC® 1000V CAT III Hybrid Multimeter • Full function Multimeter with an insulation test feature is used to test for voltage leaks through insulation found on Hybrid and ElectricVehicles • Features: Hybrid Insulation Resistance Test,True RMS,Auto Ranging, Diode Test, Continuity Buzzer, Data Hold and Logging, Display Backlight, Min/Max and Sleep Mode, Low Battery Display • Kit Includes: Heavy-Duty Class III test leads with alligator clips, short lead, K type temperature adapter and manual OTC 3990 $ 36999 Non Contact A/C Voltage Sensor MTP MTPVT-6 $ 1479 • Very bright LED and buzzer alarm informs you that voltage is present • Detects A/C voltage without connecting into the wire circuit • Ideal for electrical troubleshooting, detecting a live A/C source and locating a burned-out bulb in a series • 90-240 Volts AC/CA 50-60 Hz. Tachometer Contact/Non-Contact MTP MTAT8 $ 18139 Relay Buddy 12/24 • Tests both 12V and 24V relays in 10 seconds • Just plug in the relay and press the test button - green light for pass,red light for fail • If relay fails, one of 3 trouble codes is displayed • Switch contacts are loaded to detect excessive resistance • Quick off-the-car relay tester ESI 192 $ 7999 Carbon Monoxide Detector MTP MTCO180 $ 29079 OTC® Fuel Injection Pulse Tester • Check cylinder balance by firing individual injectors at 1/2-second increments in (3) different ranges: 1 pulse of 500 milliseconds, 50 pulses of 10 milliseconds, 100 pulses of 5 milliseconds. • Power and output lights indicate test activation • Includes wiring harness adapter and instructions OTC 3398 $ 17999 DIAGNOSTIC TOOLS AC/DC CLAMP METERS AC Clamp Meter 400A AC MTP MTP3093 $ 11459 AC/DC Clamp Meter 400A AC/DC Both units feature:1.2 Clamp opening, 4000 count digital LCD display, data hold, REL (zero) function auto power off. TRMS AC Clamp Meter AC True RMS, 1000A AC MTP MTP3095 $ 18999 TRMS AC/DC Clamp Meter AC/DC True RMS 1000A AC/DC MTP MTP3096 $ 24999 Both units feature: 1.5 clamp opening, max/min, data hold, REL (zero) function,6000 count digital LCD display with back-light Analogue bar graph (61 seg.). MTP MTP3094 $ 19499 OTC® AMP CLAMPS Mid- and High-Range • Test charging current and starting current draw • 31mm clamp diameter fits most vehicle applications • 0-200A, 0-1000A Measurement ranges; 1mV/A output.Accuracy: ± 1% of reading ± 500mA. Resolution: 100mA • Power: Internal, replaceable 9V battery, low battery indicator • 0-200A 0-1000A measurement ranges; 1mV/A output OTC 3174 $ 28999 Low Amp Clamp • 0–60 Amp range, measures to 90 Amp, 100mV/A • High accuracy, and low noise interference • Non-intrusive AC/DC current measurement • Resolution: 10mA average responding, RMS calibrated • Includes display for use without a multimeter OTC 3820-13 $ 32999

×