presentation.

1. Presentation
on
semi jacquard knitting machine

2. Main cylinder

3. There are 39 pegs . top 3 are fixed or common butts. rest 36 for design
(means in a repeat of a course there may be 36 wales maximum)

4. Needles of different butt positions . each peg controlles a single
needle.

6. o Each peg box makes a single course like a feeder and can
produce 36 wales in a repeat of a course

7. There are 38 pegs . top 2 are fixed
Left right

8.  As cylinder moves anti clockwise ,needles get peg
of a peg box at the left side first.
 If no peg is pressed all needles are active and can
produce all knit loops.
 If left (peg) is pressed , it press selector and
disconnect corresponding needle and forms miss
loop
 If only right (peg) is pressed , it press selector
and disconnect corresponding needle after
forming a half loop and it forms tuck loop

9. All knit loops.

11. 1st box produce all knit loops.
2nd box will produce as per design.
Design will be

14. Cam box

15. All parts are attached without cam box.

16. Cam box

17. Pin or connector

18. jack

19. needle

20. needle
Selector @ jack

21. Md . Abdullah al mamun
2010 1 051