Spray on biodegradable protection for the construction industry and industrial applications . Simply point and spray

1. PRODUCT SHEET
SURFACE ®
UP TO 4 MONTHS PROTECTION
INTERNAL USE ONLY
ULTRA TOUGH
EASY TO REMOVE
TEMPORARY INTERNAL SURFACE PROTECTION
WWW.INTELLIGENTMEMBRANES.CO.UKFOLLOW US ONLINE 20KG
SURFACE
**THIS PRODUCT IS NOT UV RESISTANT AND IS NOT WEATHER RESISTANT
*PATCH TEST ON SURFACE 3-7 DAYS BEFORE APPLICATION
O
U
R
TUBS ARE M
A
D
E
FRO
M
R
E C Y C L E D M AT
E
R
IAL
***THIS PRODUCT IS NOT FOR EXTERNAL USE

2. Peelable spray applied temporary protective coating for use on a
wide range of surfaces such as walls, tiled floors, shower trays,
and bath tubs. Remove as plastic film when
protection is no longer needed.
Airless spray device required. For inside use only.
1 OF 2WWW.INTELLIGENTMEMBRANES.CO.UKFOLLOW US ONLINE
DESCRIPTION
SURFACE PRO® is a natural polymer based liquid, which is applied with an airless
paint spray machine that dries to form a flexible and peel-able temporary protection
film for use on different types of porous and non-porous substrates such as painted
walls, concrete surfaces and bricks. This product is mainly used by companies
protecting their valuable bathroom shower trays, tubs, tiled floors, walls and
worktops from the damage usually caused during the construction process.
SURFACE PRO® is fit for use inside and does not contain solvents. SURFACE PRO® is
easily removed as a plastic film within 6 months after application and does not leave
any residue.
APPLICATION
PREPARATION: WHEN APPLYING TO POROUS SUBSTRATES SUCH AS STONE
ALWAYS USE STONESHIELD® TO IMPREGINATE THE SUBSTRATE FIRST BEFORE
APPLYING SURFACE PRO®. THIS WILL STOP THE SOAKING IN OF SURFACE PRO®
» Minimum application temperature during application and during drying: + 5°C.
» Perform a test to verify peel-ability and the absence of any negative effect to the
surfaces to be protected.
» Remove loose parts, dust and standing water.
» Mix well before use. Do not dilute with water or solvents.
» Apply SURFACE PRO® with an airless paint spray device
» Minimum consumption: 0,5 kg/m2.
» Protect surrounding surfaces from overspray during application.
» Avoid contact of SURFACE PRO® with water or other products in the drying phase.
» Cleaning of tools after application: use AW1-Cleaner which is an alkaline cleaning
agent, and rinse thoroughly with water afterwards.
SURFACE ®

3. PRODUCT CHARACTERISTICS AND CERTIFICATES
Chemical basis Polymer; solvent free.
Density +/- 1 kg/litre
Colour Wet state: pink; after drying: typical latex colour/colourless
Odour Neutral; slightly ammoniac
Minimum consumption 0,5 kg/m2
Elongation (EN 12311) 800%
Dart Drop Test (ASTM D 1709) Pass; film is not broken after projectile drop:
height: 1,50 meter; diameter 50mm.
Drying time 1 to 4 hours (standard conditions)
SURFACE ®
2 OF 2WWW.INTELLIGENTMEMBRANES.CO.UKFOLLOW US ONLINE
STORAGE
5 – 20 °C; store out of direct sunlight; Conservation: 6 months from date of production
in unopened and original packaging. ALWAYS USE STONESHIELD® on porous
substrates and 3-7 day patch test ANY substrate you wish to protect.
PACKAGING
Pail of 20kg – Pallet: 32 pails of 20kg/ Pail of 10kg – pallet: 44 pails of 10kg

4. C l o p t o n Fa r m , C r oyd o n , C a m b r i d g e s h i r e , s g 8 0 e f
w w w. i n t e l l i g e n t m e m b r a n e s . c o . u k
WWW.INTELLIGENTMEMBRANES.CO.UKFOLLOW US ONLINE
DATE OF THIS EDITION:
07/01/2020
Our general conditions of sale apply. This document does not
have a contractual value. This technical data sheet replaces and
cancels the previous edition. The information given in this sheet
has the purpose to inform and advice you. At every moment,
this sheet can be adapted because of technical evolution. All
information is given in good faith and without any warranty. The
application use and processing of these products are beyond our
control and therefore the entire responsibility of the user/cli-
ent/applicator. The user of the product must test the product’s
suitability and apply for the intended purpose. Established
liability if any for any reason is always limited to the value of the
goods supplied by INTELLIGENT MEMBRANES. The products and
systems are manufactured under total quality management.
INTELLIGENT MEMBRANES reserve the right to change the
properties of its products. Users must always refer to the most
recent issue of the local Product Data Sheet, copies of which will
be supplied on request.