1. Date
11.01.17
Location: blue screen Task being assessed: Students taking photos in college
General Risk assessment
Student Name:
Tatum Gascoigne
HAZARDS DEGREE OF RISK CONTROL MEASURES ACTION PLAN
Hazard
Regardless of control measures
Persons
at risk
*1
Worst
outcome
*2
Probability
*3
Risk
Rating
A-E
Existing control measures taken
against the risk
What further control
measures are required when
and by whom
• The model accidently
knocking into the blue
screen and knocking it
over and hitting someone
• Model accidently trips
over the equipment
around the blue screen
St
St
nr
nr
Ps
ps
E
E
• Model stands quite close
against the blue screen, but
not applying pressure so
that the screen isn’t
carrying any weight and
can’t tip over onto
somebody
• Tell the model to move in
front of the blue screen
from the middle instead of
going round the sides
where the equipment is to
avoid them
• Making sure the blue
screen is secure onto
the floor and is strong
by asking a specialist
to ensure it doesn’t fall
onto the model and
hurt them
• .Ask to see whether its
possible to move the
equipment out a bit so
it’s not as close the
model and therefore
the chances of tripping
over it are reduced
2. Date
11.01.17
Location: Metal railings Task being assessed: Students taking photos in college
General Risk assessment
Student Name:
Tatum Gascoigne
HAZARDS DEGREE OF RISK CONTROL MEASURES ACTION PLAN
Hazard
Regardless of control measures
Persons
at risk
*1
Worst
outcome
*2
Probability
*3
Risk
Rating
A-E
Existing control measures taken
against the risk
What further control
measures are required when
and by whom
• Someone slipping off the
metal railing due to the
metal being wet from
weather conditions
• Getting up and down the
metal bars as someone
could fall and hurt
themselves
St
St
min
min
Ps
ps
d
d
• Using the bars when the
weather is clear and hasn’t
been raining so it can be
assured that they’re dry.
• Testing out whether the
model can easily get up and
down or if they need extra
help from someone before
the shoot to ensure they
don’t hurt themselves
• Using a towel to wipe
down the bars to
ensure that they are dry
so the models can use
them as support to get
up and down without
slipping and falling
• I could use a stool so
the models can easily
get up and down the
metal bars without
reaching or jumping.
