1. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE® Closure Series: Section
1
Section 1 – COYOTE® Closure Series
Table of Contents Page
COYOTE Closure Overview ....................................................................1-2
COYOTE GLC (Ground Level Closure) ..................................................1-4
COYOTE Dome Closure ..........................................................................1-9
COYOTE In-Line RUNT..........................................................................1-10
COYOTE Terminal Closure – Dual Chamber.......................................1-11
COYOTE Terminal Closure – Single Chamber....................................1-12
COYOTE Terminal Closure ...................................................................1-13
COYOTE Aerial Drop Closure...............................................................1-15
COYOTE LCC (Low Count Closure).....................................................1-16
COYOTE Splice Tray Capacity Charts .................................................1-18
COYOTE Silicone Grommet Kits ..........................................................1-20
COYOTE DTC (Drop Termination Closure) .........................................1-21
COYOTE Taut Closure ..........................................................................1-22
COYOTE RUNT Closure ........................................................................1-23
COYOTE PUP Closure...........................................................................1-24
COYOTE Closure ...................................................................................1-25
COYOTE Closure End Plates and Accessories ..................................1-27
COYOTE Cross-Connect and Cross-Connect/Express Closure .......1-33
COYOTE Drop Cable Closure ...............................................................1-36
COYOTE Closures for High Fiber Count Applications ......................1-37
COYOTE Retrofit Closure .....................................................................1-38
COYOTE Closures (ADOBE™ Series) ...................................................1-39
2. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE Closure Overview ®
Choose a member of the COYOTE Closure
Family that Best Suits your Application......
It all began with the development of a new breed of fiber optic unique solutions to the varied requirements of an ever-evolving
closure. Craft friendly. Easily installed. Competitively priced. fiber optic network. From aerial to underground to every step
And designed to go wherever fiber optic cable takes you. Over of the last mile, the COYOTE family of fiber optic closures is
the years the philosophy has remained constant, and the fam- there to provide performance you can count on.
ily has grown with each successive member offering its own
COYOTE GLC (Ground Level Closure) COYOTE Terminal Closure (Dual Chamber) (Page 1-11)
Pedestal System (Page 1-4)
T h e C OYO T E
The COYOTE GLC Pedestal Terminal Closure is
System is the first truly her- available in two
metically sealed pedestal configurations –
system. With its patented Dual and Single
segmented end plate design, Chamber:
it allows you to make adjust-
ments on site or move to an The unique dual
enclosed work environment. chamber design
The design also permits a RUS LISTED provides two dis-
high volume of uncut slack tinct chambers that
cable storage if needed. can be configured differently to support up to 24 externally
mounted hardened connections, internally mounted cross-
RUS LISTED
connect bulkhead connections or a combination of both. A
window designed within the closure interior allows fibers to
COYOTE Dome Closure (Page 1-9) be passed between chambers. High drop capacity out each
T h e C OYOT E D o m e of the eight cable ports and the ability to use standard or
Closure was specifically hardened adapter covers, provides infinite options to support
designed for applications your network design.
where a domed-st yle
configuration is preferred. COYOTE Terminal Closure (Single Chamber) (Page 1-12)
It features an innovative The COYOTE Terminal
end plate design with Closure (Single Chamber)
segmented sections that is the ideal choice for net-
allow for individual access work designs requiring
RUS LISTED of each cable without hardened adapter termina-
disruption to surrounding tion. Externally mounted
cables. A full line of multi-hole grommets ensures the ultimate OptiTap* hardened adapt-
level of flexibility to meet the demands of ever evolving ers allow for future instal-
communications networks. RUS LISTED
lation of up to 12 hardened
drops without closure reentry. Compact size allows the closure
COYOTE In-Line RUNT (Page 1-10) to be installed into pedestals and small hand holes. Additional
The COYOTE In-Line RUNT drop capacity through the 4 entry ports of the closure base,
Closure has the versatility and provide added flexibility for the closure to act as a distribution
features that make it a perfect point for closures deeper in your network.
choice for distribution, node and
fiber to the premises networks. COYOTE Aerial Drop Closure (Page 1-15)
The compact size allows the The COYOTE Aerial
closure to be installed into ped- Drop Closure is a
estals and small hand holes, value priced solution.
keeping your installation costs Features include its
down. High drop capacity and compact size and
RUS LISTED the capability to be converted to ease of installation –
a terminal closure will allow room no special tools need-
for expansion long after the ed. It is capable of
initial installation. higher splice capaci-
ties and is designed for PLP’s easy-to-use grommet system.
Included is the universal mounting bracket, which permits pole
mounting with straps, strand mounting with strand clamps or
suspension from “J” hooks secured to a pole.
1-2
*OptiTap™ is a trademark of Corning Cable Systems.
3. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE® Closure Series: Section
1
COYOTE Closure Overview ®
Closure Overview
COYOTE®
COYOTE LCC (Low Count Closure) (Page 1-16) COYOTE Closure (Page 1-25)
The COYOTE LCC is Setting the bar against which all
designed specifically other fiber closures are measured
for low fiber count in- was no small task for our design
stallations and repairs team. But years of research &
within your Fiber-to- development eventually paid off in
the-Home, Node or the form of a rugged and reliable
Curb deployments. design that has become legend.
The closure's compact After over ten years of field use and
RUS LISTED size, use of the versa- several hundred thousand units
tile grommet system sold, the original COYOTE Closure
and internal LITE-GRIP® Splice Platform, make this rugged still remains one of the most highly
closure the economical choice for your network. Designed with RUS LISTED regarded and widely used fiber
ease of use in mind and maximum versatility. Kits have also optic closures in the industry.
been created to support copper applications.
COYOTE Cross-Connect and Cross-Connect/
COYOTE DTC (Drop Termination Closure) (Page 1-21) Express Closure (Page 1-33)
This new closure design is The COYOTE Cross-Connect
constructed to support butt or C l o s u re wa s d e s i g n e d fo r
inline low count splice applica- applications requiring connector-
tions in a direct buried or below ization or cross connecting in the
grade environment and pole/ outside plant network. Addition-
wall mounted applications ally, the COYOTE Cross-Connect/
near the end of you network. Express Closure was configured
The closures’ compact size to allow for convenient and safe
and rugged exterior allow for storage of uncut buffer tubes in
installation in tight spaces without compromising functionality. the feeder cable, while providing
individual connectivity to the fibers
COYOTE Taut Closure (Page 1-22) of the drop cables.
The COYOTE Taut Closure
simplifies branch cable taps
or repairs of taut fiber optic COYOTE Retrofit Closure (Page 1-38)
cables. Features the innova- The COYOTE Retrofit Closure is
tive End Plate from the Dome the right choice for replacement or
Closure and full line of multi expansion of existing fiber optic
hole grommets. closures.
COYOTE RUNT Closure (Page 1-23)
T h e c o m p a c t C OYOT E COYOTE® MPC (Multi-Purpose Closure) (Page 16-3)
RUNT Closure is ideal for low
The COYOTE MPC focuses
fiber count, (up to 48 splices),
on the MDU environment,
end-of-the-line, node and fiber-
providing a flexible platform
to-the-curb installations. It will
to address the multitude of
easily fit into most pedestals
applications that exist in
and hand holes, and the rug-
residential and commercial
ged design allows it to be used
FTTx installations. Con-
in all environments.
structed of durable, UV
RUS LISTED stabilized, flame-retardant
RUS LISTED polymer, the closure permits
interior or exterior applica-
COYOTE PUP Closure (Page 1-24) tions. Accepting an easy-to-use grommet system and standard
The COYOTE PUP Closure commercially available fittings, eight cable entrance ports are
offers the perfect choice for low available around the closure exterior. The MPC’s interior
fiber count distribution applica- can be configured to address slack storage, splicing, cross
tions involving butt and inline connect, hardened adapter application or a combination of
installations.The compact size all. In addition, to minimize installation labor, the closure is
and rugged design allow the available in pre-terminated configurations.
closure to be applied in below
grade, aerial and buried instal-
lations. Supported by a full line
of COYOTE accessories, this
RUS LISTED closure can grow along with
1-3
your network.
5. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE® Closure Series: Section
1
COYOTE GLC (Ground Level Closure)
®
(Ground Level Closure)
COYOTE® GLC
Configuration Selection
COYOTE® GLC (Ground Level Closure)
Base with Flat Cover (C1) C1
• Ideal for slack storage of fiber optic cable with diameters
up to .60" (15.24 mm) during initial construction
• Base can store 100 ft of slack cable
• Exterior Base Dimensions: 19.5" L x 19.5" W x 13" H
(49 cm x 49 cm x 33 cm)
• Protective cable routing channel on base exterior
• Slots provided in base for securing cable
• Split base to allow for installation/replacement without
disrupting previously installed GLC components
• Base retention stakes available to secure base in ground
(see Accessories Selection)
• Base height can be increased with the use of spacers
(see Accessories Selection) Cat. No.: COYGLC-C1-000
• Durable flat cover with integrated handles
COYOTE GLC Dome Assembly with Platform (C2)
• Used for splicing cable stored in a previously installed GLC C2
base with flat cover
• Dome Assembly includes: (1) GLC dome, (1) collar, (1) fiber
organizer (see Fiber Organzier Selection), & (1) platform
• Dome Assembly provides a hermetical seal to keep out water,
insects, and rodents
• Dome Size: 9.5" W x 17" L (24 cm x 43 cm)
• Collar system provides quick re-entry. No special tools required.
• Integrated handles in collar allow for ease of handling when
installing/removing dome assembly with platform from base
• Collar latch allows for other security devices to be used
• Platform allows dome assembly to be attached/detached from
GLC base
• Split platform to allow for installation/replacement without
disrupting previously installed GLC components
Cat. No.: COYGLC-F1-000 Cat. No.: COYGLC-F3-000
Cat. No.: COYGLC-F2-000 Cat. No.: COYGLC-F4-000
Full COYOTE GLC Assembly (C3)
• Used for splicing and storing cable during initial construction C3
• Allows for fiber splicing at a fixed or remote location such as a
splice trailer
• Dome Assembly provides a hermetical seal to keep out water,
insects, rodents, and other harmful elements
• Various fiber organizers available to suit your splicing needs
(see Fiber Organizer Selection)
• Full GLC Assembly includes: (1) GLC Dome, (1) Collar, (1)
fiber organizer (see Fiber Organzier Selection), (1) platform,
and (1) base
• All GLC components are modular and can easily be replaced
• GLC base allows for storage of 50 ft (1524 cm) cable legs
• Base retention stakes available to secure base in ground
(see Accessory Selection)
• Base height can be increased with the use of spacers
(see Spacer Selection)
Cat. No.: COYGLC-F1B-000 Cat. No.: COYGLC-F3B-000
Cat. No.: COYGLC-F2B-000 Cat. No.: COYGLC-F4B-000 1-5
6. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE GLC (Ground Level Closure)
®
Fiber Organization Selection
Buffer Tube and Unitube/Ribbon Organizer (F1)
F1 • Ideal for traditional single fusion or mass fusion/
ribbon splicing
• Patented segmented end plate allows for cables
to be added without disrupting previously
• Accommodates up to 96ct buffer tube cable installed cables
or 144ct unitube/ribbon cable measuring .60" • Provided with 4 port end plate
(15.2 mm) or smaller • 7 port end plate available upon request
• Organizer includes: (1) 4-port end plate with • Adaptable to larger handholes; if greater below
universal organizer, (1) gasket, (4) grommets*, ground storage or if larger cable diameters are
(4) strength member brackets, (1) LITE-GRIP® required for your application
Short Splice Tray for Single Fusion, and
miscellaneous hardware *Standard Kit Grommets include (2)8003663
• See Splice Tray Section Chart on pg. 1-8 (1)8003664 (1)8003665 – Custom grommet
• Features the latest, easy to use grommet combinations available upon request
sealing system
Buffer Tube Organizer for Increased Tray and Storage Capacity (F2)
F2 • Ideal for traditional single fusion splicing where
more expressed buffer tube storage and/or
• Patented segmented end plate allows for cables
to be added without disrupting previously
splice tray capacity is needed installed cables
• Accommodates up to 96ct buffer tube cable • Provided with 4 port end plate
measuring .60" (15.2 mm) or smaller • 7 port end plate available upon request
• Organizer includes: (1) 4-port end plate with • Adaptable to larger handholes; if greater below
buffer tube organizer, (1) gasket, (4) grommets*, ground storage or if larger cable diameters are
(4) strength member brackets, (1) LITE-GRIP required for your application
Short Splice Tray for Single Fusion, and
miscellaneous hardware *Standard Kit Grommets include (2)8003663
• See Splice Tray Section Chart on pg. 1-8 (1)8003664 (1)8003665 – Custom grommet
• Features the latest, easy to use grommet combinations available upon request
sealing system
Cross-Connect Organizer for Buffer Tube and Unitube/Ribbon (F3)
F3 • Ideal for traditional single fusion or mass fusion/
ribbon splicing where cross-connect capabilities
• Features the latest, easy to use grommet
sealing system
are needed • Patented segmented end plate allows for
• Accommodates up to 96ct buffer tube cable cables to be added without disrupting previously
or 144ct unitube/ribbon cable measuring .60" installed cables
(15.2 mm) or smaller • Provided with 4 port end plate
• Organizer includes: (1) 4-port end plate with • 7 port end plate available upon request
cross-connect organizer, (1) gasket, (4) • Adaptable to larger handholes; if greater below
grommets*, (4) strength member brackets, (1) ground storage or if larger cable diameters are
LITE-GRIP Short Splice Tray for Single Fusion, required for your application
and miscellaneous hardware
• Accommodates up to 4 SC, ST, LC, or FC *Standard Kit Grommets include (2)8003663
adapter plate modules (1)8003664 (1)8003665 – Custom grommet
• Can support pre-connectorized splitters combinations available upon request
• See Splice Tray Section Chart on pg. 1-8
OptiTap™ Organizer for Buffer Tube and Unitube/Ribbon (F4)
F4 • Ideal for traditional single fusion or mass fusion/
ribbon splicing where OptiTap connections
• Features the latest, easy to use grommet
sealing system
might be needed • Patented segmented end plate allows for cables
• Accommodates up to 96ct buffer tube cable to be added without disrupting previously
or 144ct unitube/ribbon cable measuring .60" installed cables
(15.2 mm) or smaller • Provided with 4 port end plate
• Organizer includes: (1) 4-port end plate with • Adaptable to larger handholes; if greater below
OptiTap organizer and shroud, (1) gasket, (4) ground storage or if larger cable diameters are
grommets*, (4) strength member brackets, (1) required for your application
LITE-GRIP Short Splice Tray for Single Fusion,
and miscellaneous hardware *Standard Kit Grommets include (2)8003663
• Accommodates up to 8 OptiTap adapters (1)8003664 (1)8003665 – Custom grommet
• Can support pre-connectorized splitters combinations available upon request
1-6 • See Splice Tray Section Chart on pg. 1-8
7. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE® Closure Series: Section
1
COYOTE GLC (Ground Level Closure)
®
(Ground Level Closure)
COYOTE® GLC
Spacer Selection
Standard Spacer (S1)
• Ideal for adjusting the GLC base height to ground level during S1
the back filling process of the installation of the base
• Split design allows for installation/replacement without
disrupting previously installed GLC components
• Can be stacked to achieve desired base height
• Each spacer increases the base height by 3" (7.6 cm)
• Standard Spacer Kit includes: (2) standard spacer halves,
(4) spacer studs, and (2) self tapping bolts
Grounding Spacer (S2)
• Ideal for isolated ground testing without having to re-enter the
splice enclosure
S2
• Provides up to 7 isolated ground connections
• Removable access plate on spacer exterior conceals
grounding plate
• Screw-on terminal head for #6 ground wire allows for quick
connection to grounding plate
• 2.5 ft (76.2 cm) flexible ground leads make connecting ground
studs of splice enclosure to the grounding plate in spacer easy
• Easily removable busbar permits quick ground isolation
• Split design allows for installation/replacement without
disrupting previously installed GLC components
• Can be stacked on top of multiple standard spacers (S1) to
achieve desired base height
• Grounding spacer increases the base height by 3" (7.6 cm)
• Grounding Spacer Kit includes: (1) standard spacer half,
(1) grounding spacer half, (1) removable access plate,
(1) grounding plate, (1) removable buss bar, (4) ground leads,
(1) screw-on terminal head (4) spacer studs, and (2) self
tapping bolts
Dual Grounding Spacer (S3)
• Includes all the features and benefits as a standard grounding
spacer (S2)
S3
• Provides up to 14 isolated ground connections
• Removable access plates on spacer exterior conceal
grounging plates
• Screw on terminal head for #6 ground wire allows for quick
connection to grounding plate
• Dual Grounding Spacer Kit includes: (2) grounding
spacer halves, (2) removable access plates, (2) ground-
ing plates, (2) removable buss bars, (8) ground leads,
(2) screw-on terminal heads (4) spacer studs, and
(2) self tapping bolts
1-7
8. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE GLC (Ground Level Closure)
®
Grommet Selection Accessory Selection
Catalog Cable Range Catalog
Description Grommets Description Accessory
Number Inches (mm) Number
.40 - .60 1-hole
8003691 80809005 Dome
(10.7 - 15.2) grommet
.42 - .60 2-hole 80809006 Dome Collar
8003663
(10.7 - 15.2) grommet
.50 - .60 (12.7 - 15.2) 80809775 Dome Gasket
4-hole
8003990 .125 - .25 (3.2 - 6.4)
grommet
and Flat Drop
Dome Collar
80809793
.30 - .43 4-hole Lock Assembly
8003664
(7.6 - 10.9) grommet
80809781 Cover Kit
.125 - .25
6-hole
8003665 (3.2 - 6.4)
grommet
and Flat Drop
42" Base Retention Stake
80809788
.42 - .60 (10.7 - 15.2) with Anchor Plate
7-hole
8003676 .125 - .25 (3.2 - 6.4)
grommet
and Flat Drop Base Retention Stake
80809791
.125 - .25 Driver Cap
8-hole
8003677 (3.3 - 6.4)
grommet LITE-GRIP Splice Blocks
®
and Flat Drop
LGSBS8-5 for Single Fusion (Yellow) -
5 splice blocks
Flat Drop 4-hole
8003989
Cable Only grommet LITE-GRIP Splice Blocks for
LGSBR3-5 Mass Fusion/Ribbon
(Purple) - 5 splice blocks
Flat Drop 12-hole
8003796
Cable Only grommet COYOTE ®
800013213
Cross-Connect Tray
Express Fiber Storage Ring
80808613
Splice Tray Selection for LITE-GRIP Splice Tray
GLC Fiber Parking Lot for
Organizer 80808817 Cross-Connect Organizer –
Reference Holds 6 Connectors
Splice Code
Catalog Count/ Splice CORNING OptiTap TM
Number Type Description Tray F1 F2 F3 F4 80808152
Adapter
16 Single LITE-GRIP®
LGSTS16 2 6 2 2
Fusion Short Tray 80807972 OptiTap Installation Tool
40 Single LITE-GRIP
80808945 2 6 2 2
Fusion Short Tray 80809766 Shield Connector
144 Mass
LITE-GRIP
LGSTR144 Fusion/ 2 6 2 2 Contact PLP
Short Tray COYOTE PLC Splitter
Ribbon for details
12 Single
80806033 Standard 3 8 3 3 Contact PLP
Fusion Adapter Modules
for details
12 Single
80807701 Low Profile 4 13 4 4
Fusion Contact PLP
Pigtail Cable Assemblies
for details
Contact PLP Optical Drop Cable
for details Assembly
1-8
10. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE In-Line RUNT Closure
®
Evolution of the Breed Continues… COYOTE IN-LINE RUNT Closure Kits
Catalog
Number Description
8006951 Hermetically Sealed
8006952 Free Breathing
80061004 Express, Hermetically Sealed
80061049 Flame Retardant Hermetically Sealed
COYOTE IN-LINE RUNT Accessories
Catalog
Number Description
Splice Tray Kits
12 Count Low Profile Tray w/plastic splice block –
80807701
single fusion splices
12 Count Standard Tray w/Elastomeric splice block
80806033
– single fusion & mechanical fusion
16/40* Count Tray w/LITE-GRIP® splice blocks for
LGSTS16
single fusion splice
144/180* Count Tray w/LITE-GRIP splice blocks for
LGSTR144
ribbon splices
24 Count Low Profile Tray w/plastic splice blocks for
8003468 single fusion splices
Versatile NOTE: Requires 8003757 Tray Conversion Kit
72 Count Ribbon Tray w/Elastomeric Splice Block for
The COYOTE® In-Line RUNT Closure has the versatility and 80807114
Mass Fusion
features that make it a perfect choice for distribution and
Cover Kit
fiber to the premise networks. The compact size allows the
8003719 COYOTE In-Line RUNT Cover Kit
closure to be installed into pedestals and small hand holes,
keeping your installation costs down. High drop capacity and Miscellaneous Accessory Kits
the capability to be converted to a terminal closure will allow 8003733 End Plate Kit
room for expansion long after the initial installation. 80807794 Hardware Bag
8003713 Express Brackets
Rugged and Reliable 8003757 24 Count, Low Profile Splice Tray Conversion Kit
The COYOTE In-Line RUNT Closure is tested in accordance 80807571 Spiral Tube Kit; 6' Length
with the demanding requirements of Telcordia GR-771- Transport Tube Kit .135" ID; includes (6) 34" long
80805293
transport tubes
CORE for all aerial, buried and underground environments.
Manufactured in accordance with ISO 9001:2008 proce- Transport Tube Kit .25" ID; kit includes (3) 6'
80808639
transport tubes
dures and backed by the experience and field support that
80807989 Transport Tube 100' reel 0.170" ID
PLP has been noted for since 1947.
80807991 Transport Tube 100' reel 0.25" ID
8003862 Fiber Organizer Kit for Ribbon Applications
Key Features:
Mounting Hardware Kits
• Compact Size: 17.5" L x 10" W x 3.5" H
8003703 Pole/Wall Mount Bracket
(44 cm x 25 cm x 9 cm)
8003797 Aerial Hanger Bracket
• High drop capacity – See grommet chart
8003706 Swing Arm for Hand Holes
• 4 entry ports, each accept 1-1/4" maximum cable diameter Pedestal Mounting Bracket for Emerson PRO12
8003714
• Hermetically sealed, free breathing, express and flame Pedestal PLP Fiber Optic Products
retardant configurations available Universal Mounting Bracket Kit for Handhole
8003835
• Quick and easy assembly – no special tools required Applications
• Simple-to-use grommet sealing system
• Hinged cover reduces number of parts required upon Capacities
re-entry Splice Tray Splices Trays per Splice
Depth Description per tray Closure capacity
• Internal organizer manages buffer tube or ribbon cable
Low Profile Single Fusion 12 4 48
• Integrated air valve to test assembly seal
Single Fusion or
• Convertible to a COYOTE Terminal Closure with available Standard 12 2 24
Mechanical
cover kits – request COYOTE Terminal brochure Ribbon Mass Fusion 72 2 144
• Full line of mounting hardware available *50% more storage for midsheath (express) applications, but 50% less
splice capacity
• Tested in accordance to Telcordia GR-771-CORE
1-10 • RUS Listed
11. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE® Closure Series: Section
1
COYOTE Terminal Closure (Dual Chamber)
®
Terminal Closure
COYOTE®
Evolution of the Breed Continues…
The COYOTE Terminal Closure (Dual Chamber) is the
choice for network designs requiring ultimate flexibility. The
unique dual chamber design provides two distinct chambers
that can be configured differently to support externally
mounted OptiTap™ style hardened adaptors, internally
mounted cross-connect bulkhead connections or a combi-
nation of both. A window designed within the closure inte-
rior allows fibers to be passed between chambers. High
drop capacity from each of the eight cable ports and the
ability to use standard or hardened adapter covers, provides
infinite options to support your network design.
Terminal Closure (Dual Chamber) with hardened adaptors
Key Features:
• Compact Size: 17.5" L x 10" W x 12" H
(44 cm x 25 cm x 30 cm)
• Accepts up to 24 hardened adapters
• Eight Entry ports each accept 1-1/4" maximum
cable diameter
• High drop capacity – 8 through each port
• Available in hermetically sealed, free breathing
and express configurations
• Quick and easy assembly – no special tools required
• Simple to use grommet sealing system
Terminal Closure (Dual Chamber) with hardened • Provided standard with SC/APC pigtails
adaptors installed in both covers • Capability to field install or remove hardened
adapter assemblies
• Internal organizer manages buffer tube or ribbon cable
• Integrated air valve provides field flash test point
• Full line of hardware available for strand, pole and
hand-hole installations
• Tested in accordance to Telcordia GR-771 CORE
• RUS Listed
Splice Compartment – Terminal Closure
(Dual Chamber) with Internal Bulkhead
Drop Cable Chamber – Terminal Closure
(Dual Chamber) with Internal Bulkhead
1-11
*OptiTap™ is a trademark of Corning Cable Systems
12. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE Terminal Closure (Single Chamber)
®
Evolution of the Breed Continues…
The COYOTE Terminal Closure (Single Chamber) is the
ideal choice for network designs requiring hardened
adapter termination. Externally mounted OptiTap* style
hardened adapters allow for future installation of up to 12
hardened drops without closure reentry. Compact size
allows the closure to be installed into pedestals and small
hand holes. Additional drop capacity through the four entry
ports of the closure base, provide added flexibility for the
closure to act as a distribution point for closures deeper in
your network.
Key Features:
• Compact Size: 17.5" L x 10" W x 6" H
(44 cm x 25 cm x 15 cm)
Outside View – Terminal Closure (Single Chamber) • Accepts up to 12 hardened adapters
• Four Entry ports each accept 1¼" maximum
cable diameter
• High drop capacity – 8 through each port
• Available in hermetically sealed, free breathing
and express configurations
• Quick and easy assembly – no special tools required
• Simple to use grommet sealing system
• Provided standard with SC/APC pigtails
• Port identification numbers to simplify assembly
• Capability to field install or remove hardened
adapter assemblies
• Internal organizer manages buffer tube or
ribbon cable
• Integrated air valve provides field flash test point
End Plate with Distribution Cable
and 6-port Drop Cable Grommet • Full line of hardware available for strand, pedestal, pole
and hand-hole installations
• Tested in accordance to Telcordia GR-771 CORE
• RUS Listed
Inside View – Terminal Closure (Single Chamber) Drop wire with mating connectors for terminal are
available in various lengths. Contact your local PLP
representative or customer service for more details.
1-12
*OptiTap™ is a trademark of Corning Cable Systems
13. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE® Closure Series: Section
1
COYOTE Terminal Closure ®
Terminal Closure
COYOTE®
Evolution of the Breed Continues…
Installation of Hardened COYOTE Terminal
Connectors Closure – Hand
Hole Application
COYOTE Terminal Closure –
Pedestal Application
Coyote Terminal Closure Kits
Catalog Chamber Adapter Plug Cover Type
Number Description Type Qty Qty Terminal Standard
800012002 COYOTE Terminal Closure – 2 Port Single 2 4 1 0
8006993 COYOTE Terminal Closure – 3 Port Single 3 3 1 0
8006953 COYOTE Terminal Closure – 4 Port Single 4 2 1 0
8006954 COYOTE Terminal Closure – 6 Port Single 6 0 1 0
8006955 COYOTE Terminal Closure – 8 Port Single 8 1 1 0
800012003 COYOTE Terminal Closure – 9 Port Single 9 0 1 0
80061067 COYOTE Terminal Closure – 12 Port Single 12 0 1 0
80061029 COYOTE Terminal Dual Chamber – 6 Port Dual 6 0 1 1
8006991 COYOTE Terminal Dual Chamber – 8 Port Dual 8 1 1 1
800012140 COYOTE Terminal Dual Chamber – 9 Port Dual 9 0 1 1
80061030 COYOTE Terminal Dual Chamber – 10 Port Dual 10 2 2 0
800011830 COYOTE Terminal Dual Chamber – 12 Port Dual 12 0 2 0
800012605 COYOTE Terminal Dual Chamber – 24 Port Dual 24 0 2 0
800011839 COYOTE Terminal Dual Chamber – EMPTY Dual 0 0 0 2
8006956 COYOTE Terminal Closure w/6 SCAPC Internal Bulkhead Dual 0 0 0 2
Terminal includes SC/AP Adapters and (1) Splice Tray
1-13
14. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE Terminal Closure ®
COYOTE In-line RUNT & Terminal Closure Accessories
Terminal
Catalog In-Line Single Dual
Number Description RUNT Chamber Chamber
Splice Tray Kits
80807701 12 Count Low Profile Tray w/plastic splice block – single fusion splices X X X
80807531 12 Count Low Profile Tray (Blank) – no splice block X X X
80806033 12 Count Standard Tray w/elastomeric splice block – fusion & mechanical splices X X X
80806182 12 Count Standard Tray (Blank) – no splice X X X
80807114 72 Count Ribbon Tray w/elastomeric splice block for mass fusion X X X
80808160 Ribbon Tray (Blank) – no splice block X X X
LGSTS16 16/40* Count LITE-GRIP® Tray (Short) for single fusion X X X
LGSTR144 144/180* Count LITE-GRIP Tray (Short) for Ribbon X X X
*Requires additional LITE-GRIP Splice Block kit for enhanced capacity
Cover Kits
8003719 COYOTE In-Line RUNT Cover Kit* X X X
8003742 COYOTE Terminal Closure Cover Kit 2-Port with Hardened Adapters X X X
8003739 COYOTE Terminal Closure Cover Kit 3-Port with Hardened Adapters X X X
8003720 COYOTE Terminal Closure Cover Kit 4-Port with Hardened Adapters X X X
8003721 COYOTE Terminal Closure Cover Kit 6-Port with Hardened Adapters X X X
8003722 COYOTE Terminal Closure Cover Kit 8-Port with Hardened Adapters X X X
8003735 COYOTE Terminal Closure Cover Kit 9-Port with Hardened Adapters X X X
8003810 COYOTE Terminal Closure Cover Kit 12-Port with Hardened Adapters X X X
Adapter Accessory Kits
8003715* Hardened Adapter Kit – Field Installable – Includes 80807972 X X
8003724* Port Plug Kit-Field Installable – Includes 80807972 X X
80807972 Hardened Adapter Installation Tool X X
80808157 Fiber Optic Pigtail Kit (2-Pigtails) X X
80807939 Fiber Optic Pigtail Kit (3-Pigtails) X X
80807806 Fiber Optic Pigtail Kit (4-Pigtails) X X
80807807 Fiber Optic Pigtail Kit (6-Pigtails) X X
80807808 Fiber Optic Pigtail Kit (8-Pigtails) X X
80808158 Fiber Optic Pigtail Kit (9-Pigtails) X X
80808700 Fiber Optic Pigtail Kit (12-pigtails) X X
Miscellaneous Accessory Kits
8003733 End Plate Kit X X X
80807794 Hardware bag X X X
80807972 Adapter Installation Tool X X
Transport Tube Kit .135" ID: includes six 34" long transPort with Hardened
80805293 X X X
Adapters tubes, used to bring fiber from transition compartment to splice tray
Transport Tube Kit .25" ID: includes six 34" long transPort with Hardened Adapters
80806439 X X X
tubes, used to bring fiber from transition compartment to splice tray
80807989 Transport Tube 100' coil 0.135" ID X X X
80807991 Transport Tube 100' coil 0.25" ID X X X
Mounting Hardware Kits
8003713 Express Bracket Kit X X X
Pole/Wall mount bracket kit for In-Line RUNT and Terminal
8003703 X X X
(Standard and Dual Chamber)
8003704 Aerial Hanging Bracket Kit for COYOTE In-Line RUNT and Terminal Closure X X
8003705 Aerial Hanging Bracket Kit for COYOTE Terminal Dual Chamber X
8003706 Swing Arm Bracket for COYOTE In-Line RUNT and Terminal Closures X X X
Pedestal Mounting Bracket for COYOTE In-Line RUNT and Terminal Closure
8003714 X X
(Emerson PRO12 Pedestal)
*Hardened Adapter Kit or Plug kit can only be used with terminal closure covers
1-14
15. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE® Closure Series: Section
1
COYOTE Aerial Drop Closure
®
Aerial Drop Closure
COYOTE®
A Simple Solution, a Breed Apart
The COYOTE® Aerial Drop Closure Kit Components
Key Features: COYOTE Aerial Fiber Drop Closure Kits
• Compact Size – 9” W x 16.5” L x 2.5” D
Catalog
• Feature rich and value priced solution Number Description
• Easy to install – no special tools required COYOTE Aerial Fiber Drop Closure Kit
COYDAC03 Includes: Cover, Base and components
• Easy-to-use grommet sealing system
shown above
• Includes splicing platform
COYOTE Splice Platform Kits
• Accepts 2 splice platforms for a splice capacity
Splice Plate Kit – 12 Count Splice Block –
of 24 fibers 8003792
Single Fusion
• Capable of higher splice capacities with alternative Splice Plate Kit – 12 Count Splice Block –
8003751
splice holders. Consult a PLP representative for details. Unprotected Single Fusion
• Includes universal mounting bracket with features to Splice Plate Kit – 24 Count LITE-GRIP Splice
8003793
permit pole mounting with straps, strand mounting with Block – Single Fusion
strand clamps or suspension from “J” hooks secured Splice Plate Kit – 72 Count LITE-GRIP Splice
8003794
to a pole Block – Ribbon
COYOTE Aerial Fiber Drop Accessory Kits
PLP Reliability 80808256 12 Entry Grommet Kit with Bobbin
End Plate Kit – includes (2) End Plates,
The COYOTE Fiber Optic Aerial Drop Closure is manufac- 8003753
Bolts and Tether
tured in accordance with ISO 9001-2008 procedures to
Strength Member Bracket Kit for Single
assure quality and is backed by the experience and field 8003777
Cable Entry
support that Preformed Line Products has been noted for
80808257 Fiber Organizer Clip Kit
in fiber optic closures for over 20 years.
8003775 Hanger Bracket Kit
1-15
17. PREVIOUS SECTION CONTENTS SEARCH NEXT
COYOTE® Closure Series: Section
1
COYOTE LCC (Low Count Closure)
®
(Low Count Closure)
COYOTE® LCC
COYOTE LCC Installation Options
Part Number
Application Type and Description
8003832
Aerial Aerial Mounting Bracket
(Strand Mount)
8003830
Pole/Wall Mount Pole/Wall Mount
Bracket Kit
8003835
Below Grade
Large Vault/Hand Hole Universal Mounting Bracket Kit
for Hand Hole Applications
COYOTE LCC:
COYLCC-XXXX
Below Grade COYOTE GLC Base
Small Hand Hole COYGLC-C1-000
Butt Applications Only
For small drop and flat drop
applications only
Direct Buried No Mounting Brackets
Needed
COYOTE LCC
Custom for Coax
Contact PLP for Details
COYOTE LCC
Custom Cross-Connect
Contact PLP for Details
COYOTE LCC
Custom with Terminal Block
Contact PLP for Details
1-17