application in dental

1. envisiontec.com Dental

2. 08 envisiontec.com
Xtreme® 3SP® Ortho & Xede® 3SP® Ortho
3Dent®
ULTRA® 3SP® Ortho
Perfactory® 4 DDP Series
Perfactory® Pixcera / Desktop DDP
Perfactory® Vida Series
Photosensitive Resins

3. EnvisionTEC - German Precision 1
P
artial Denture
s
Crown
and Bridge W
axups
Temporaries
Sur
gical Drill Gui
des
Denture Bases
Orth
odontic Appli
ances
Models
With Remova
bleDies
Night
Guards Bite S
plints
Clear Aligners

4. 2 envisiontec.com

5. EnvisionTEC - German Precision 3
Critical success factors of the digital dental lab include:
• availability and ease of use of CAD software to design restorations and models from scan data
• highly accurate, reliable 3D printers to replicate that data reliably and accurately
• a wide variety of materials for a broad spectrum of dental applications
CAD-based dental restorations using EnvisionTEC 3D printers deliver labor and material cost reduction as well
as higher clinical quality and consistency throughout the manufacturing process. Labs need to compete with
offshore production. Our low-cost, high-throughput solutions offer the requisite quality to level the global
playing field and improve dental lab competitiveness.
Al Siblani - CEO EnvisionTEC, Inc.
Our Vision - The Fully Functional Digital Dental Lab

6. 4 envisiontec.com

7. Xede® 3SP® Ortho and Xtreme® 3SP® Ortho
• Xede® 3SP® Ortho and Xtreme® 3SP® Ortho dental model printers use
Scan, Spin, and Selectively Photocure (3SP®) Technology and feature
larger build envelopes for high-production facilities
• Features office friendly plug-and-play operation with a built-in
touch screen
• Simple user interface with built-in touch screen and low part
cost due to minimal material waste
• Low maintenance technology includes an imaging light source
with a two-year warranty
Machine Specification: Xede® 3SP® Ortho Xtreme® 3SP® Ortho
Maximum Build Envelope: 457 x 457 x 102 mm 254 x 362 x 102 mm*
Resolution in X & Y: 100 µm 100 µm
Dynamic Voxel** Resolution in Z: 50 - 100 µm*** 50 - 100 µm***
Footprint: 178 x 190 x 165 cm 165 x 165 x 165 cm
Electrical Requirement: 110-120/220-240 VAC, single-phase, 15 A.
System specifications are subject to change without notice. * Deviation of +/- 2mm possible. **A voxel is volumetric pixel.
*** Pre-Adjusted by each material module and material dependent.
EnvisionTEC - German Precision 5

8. 6 envisiontec.com

9. 3Dent® and ULTRA® 3SP® Ortho
• 3Dent and ULTRA 3SP Ortho dental model printers use Scan,
Spin, and Selectively Photocure (3SP) Technology
• Features office friendly plug-and-play operation with a
built-in touch screen
• Simple user interface with built-in touch screen and low
part cost due to minimal material waste
• Low maintenance technology includes an imaging light
source with a two-year warrantye
• Models for use in producing high quality orthodontic appliance
Machine Specification: 3Dent® ULTRA® 3SP® Ortho
Maximum Building envelope: 266 x 175 x 76 mm* 266 x 175 x 76 mm*
Voxel** resolution in X & Y: 50 µm 100 µm
Dynamic Voxel Resolution in Z: 50 - 100 µm***
Footprint: 74 x 76 x 117 cm
Electrical Requirement: 100 - 127 VAC, 50/60 Hz, single-phase 8A;
200 - 240 VAC, 50 Hz, single-phase 4A
System specifications are subject to change without notice.
* Deviation of +/- 2mm possible. ** A voxel is volumetric pixel.
*** Pre-Adjusted by each material module and material dependent.
EnvisionTEC - German Precision 7

10. 8 envisiontec.com

11. Perfactory® DDP4 Series
• Low cost, user-friendly 3D printer offering ease of maintenance
and outstanding reliability
• Produces finest detail in the shortest period of time
• Can print up to 95 units such as coping and crowns or
multiple unit bridges in less than 1 hour 45 minutes
(P3DDP - 70 units in less than 3 hours)
• Capable of printing long term temporaries for direct use in
the mouth using E-Dent material as well as printing partials and
models (full arches and quads)
Machine Specification: DDP4 DDP4 M DDP4 XL
Build Envelope*: 115 x 72 x 220 mm 160 x 100 x 180 mm 192 x 120 x 180 mm
Projector Resolution: 1920 x 1200 pixels
Native Voxel** Size XY: 60 µm 83 µm 100 µm
ERM Voxel Size XY***: 30 µm 42 µm 50 µm
Footprint: 73 x 48 x 135 cm
Weight Approx: 85 kg
Electrical Requirement: 100 - 120 VAC, 50/60 Hz, single-phase, 5.4A; 220 - 240 VAC, 50/60 Hz, single-phase, 2.4 A
A
System specifications are subject to change without notice. * Deviation of +/- 2mm possible. ** A voxel is volumetric pixel.
*** Pre-Adjusted by each material module and material dependent.
EnvisionTEC - German Precision 9

12. envisiontec.com10

13. Perfactory® PixCera and Desktop DDP
• Low-cost, high-resolution desktop 3D printers designed to
fit into small areas
• The Pixcera prints up to 20 copings and crowns or
seven bridges in under two hours
• The Desktop DDP prints a wide variety of dental
applications, including quadrants and dies, drill guides,
partials, and full arches.
• Can be operated unattended with maximum reliability
• Low power consumption
Machine Specification: Pixcera Desktop DDP
Maximum Build Envelope: 60 x 45 x 100 mm* 100 x 75 x 100 mm*
Native Voxel Size in XY 43 µm 71 µm
Projector Resolution: 1400 x 1050 Pixels
Dynamic Voxel** Resolution in Z: 25 - 50 µm*** 25 - 50 µm***
Footprint: 45 x 55 x 78cm 45 x 55 x 89cm
Weight Approx: 35kg 40kg
Electrical Requirement: 100 - 120 VAC, 50/60 Hz, single-phase, 2A / 220 - 240VAC, 50/60 Hz, single-phase, 1A
System specifications are subject to change without notice. * Deviation of +/- 2mm possible. **A voxel is volumetric pixel.
*** Pre-Adjusted by each material module and material dependent.
EnvisionTEC - German Precision 11

14. 12 envisiontec.com

15. EnvisionTEC - German Precision 13
Perfactory® Vida and Vida Hi-Res
• Compatible with 3Shape, Orchestrate 3D, Dental Wings
and Exocad design software
• Any STL file of a model designed from an impression
or an Intra Oral Scanner can be printed
• Capable of printing orthodontic models, partials,
surgical guides, and bite guards
• Changeover between materials is quick and easy
with no waste
• Long life LED light source with zero maintenance and
very low acquisition cost
Machine Specification: Vida Vida Hi-Res
Build Envelope* : 140 x 79 x 100 mm 98 x 55 x 100 mm
Native Pixel Resolution: 73 µm 50 µm
Dynamic Voxel** Resolution in Z : 25 µm to 150 µm
Footprint: 39.5 x 35.0 x 78.7 cm
Weight Approx: 34 kg
Electrical Requirement: 110V, 3A/ 220V , 2A
System specifications are subject to change without notice.
*Deviation of +/- 2mm possible. **A voxel is volumetric pixel.
***Pre-Adjusted by each material module and material dependent.

16. 14 envisiontec.com
Press-E-Cast
EnvisionTEC Press-E-Cast is a wax-filled photopolymer designed for use on EnvisionTEC printers. Press-E-Cast produces highly detailed anatomy
with crisp features. Its stiffness allows for the production of copings with extremely thin margins as well as full anatomical crowns. It is also possible
to produce a perfectly fitting multiple unit bridge up to 16 units. Press-E-Cast has a very low thermal expansion during burnout and produces a
high quality surface finish on cast or pressed parts. - For use with Perfactory®, Desktop (PixCera only) and Micro machines
E-Denstone
EnvisionTEC’s E-Denstone has been developed for dental model manufacturing. The peach color provides an attractive choice for modeling that is
similar in look and feel to common die stones used in labs. It may be used in traditional manufacturing settings or for CAD-based 3D printing. This
is the only material that enables die trimming and margin marking without concerns for layer lines. Die paint sticks to the dies just like plaster and
will not peel off.The material achieves the look and feel of traditional gypsum models, making it preferable to other resin-based materials currently
on the market.The low-viscosity formula combined with the use of a high-accuracy 3D printer produces superior results with no loss of anatomical
detail. - For use with Perfactory®, Desktop, Micro, ULTRA® 3SP® and 3Dent® machines
Photosensitive Resins
Ortho Tough
EnvisionTEC‘s Ortho Tough printing material is an
extremely tough resin for use in 3D printing solutions.
It’s primary use is for the production of dental models
used for manufacturing clear orthodontic aligners
with a thermoforming process. Ortho Tough builds
quickly without sacrificing the surface quality needed
for high-quality models.
E-Appliance
EnvisionTEC’s E-Appliance is a 3D printing material
that is ideal for the 3D printing of orthodontic
models. E-Appliance is a specially designed nano-
filled resin that will work reliably with both polyvinyl
alcohol based-separators and tin foil substitute for
cold curing acrylic resin technique of producing an
orthodontic appliance.

17. EnvisionTEC - German Precision 15
E-Dent
EnvisionTEC’s E-Dent is a light-cured micro-hybrid filled dental crown and bridge material for long-term temporaries. It may be used on the
Perfactory® DDP and Micro machines. Provisionals are photo-polymerized on a voxel by voxel basis within the liquid resin. E-Dent may be
used for the printing of very tough veneers that are extremely accurate with a very fine surface finish. E-Dent is currently available in three
shades - A1, A2 and A3. Structures may be cut back and then layered using any light-curable shade composite. E-Dent has earned United
States Food and Drug Administration (FDA) approval for one year in the mouth. - For use with Perfactory DDP, Desktop DDP and Micro DDP machines
E-Partial
EnvisionTEC’sE-Partialchemistrywasdevelopedforbuildingpartialswheresomeflexisrequiredwithoutdamage.E-Partialmaterialmaintains
flexural strength to ensure clasp flex with greater toughness and no brittleness. The stiffness of E-Partial allows for production of a very
hard retention grid with super-tight, thin clasps to deliver a metal partial with the perfect fit every time. E-Partial can be also used for the
production of copings and crowns and is is especially recommended for larger build envelopes. - For use with Perfactory, Desktop and Micro DDP machines
Clear Guide
EnvisionTEC’s Clear Guide is the clearest material currently available, allowing maximum visibility for the production of accurate drill guides
on the Perfactory® DDP machines. Clear Guide has met the requirements of USP Class VI* certification testing and is suitable for approved
applications in the medical industries. - For use with Perfactory® DDP, Desktop DDP and Micro DGP machines
*DISCLAIMER: It is the responsibility of each customer to determine that its use of any Class VI certified material is safe, lawful and technically suitable to the customer’s intended applications. Customers
should conduct their own testing to ensure that this is the case.

18. 16 envisiontec.com
Open Architecture And Full Integration
EnvisionTEC 3D printers are optimized for a number of materials representing a broad portfolio of dental and orthodontic applications. We are in constant
communication with the R&D teams of the most recognized dental CAD software companies to ensure a seamless workflow that delivers consistent
manufacturing quality. Whether using 3Shape CAMbridge™ or DWOS-RPM from Dental Wings, automatic preparation is optimized for all EnvisionTEC
printers. From optimal placement to orientation to support generation, job creation is one click away. Identification tags may be automatically placed
next to each item to minimize processing after printing. Design parameters in 3Shape and Dental Wings have been optimized to deliver a set of Standard
Operating Parameters that are application-specific and provided upon request.
Machines Waxups Temporaries Partials
Orthodontic Appliances
and Aligners Models Drill Guides
Vida Hi-Res
Pixcera
DDDP
*
P4 DDP
P4 DDP M
P4 DDP XL
3Dent®
ULTRA® 3SP® Ortho
Xede 3SP® Ortho
Xtreme 3SP® Ortho
Materials
Press-E-Cast *
E-Denstone
E-Dent (A1,A2,A3)
E-Partial *
Clear Guide
E-Appliance
Ortho Tough
Specifications are subject to change without notice. *Waxups may be made on the DDP4 M only with E-Partial(EC1000) but not with Press-E-Cast (WIC300)

19. EnvisionTEC - German Precision 17
EnvisionTEC GmbH
Brüsseler Straße 51
D-45968 Gladbeck
Germany
Phone: +49 2043 9875 0
envisiontec.com • info@envisiontec.de
EnvisionTEC, Inc
15162 South Commerce Drive
Dearborn, MI 48120
USA
Phone: +1 313 436 4300
envisiontec.com • northamerica@envisiontec.com

20. MK-IND-DentalBooklet-V201512-FN-EN