1. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 1
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 1
Welcome by Endress+Hauser
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Subject:
Promass of Endress+Hauser
… more than just a Coriolis mass flow meter !
2. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 2
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 3
Flow measurement
Six innovative technologies
Instruments without any moving parts
for measurements in liquids, gas and steam
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 4
Applications Window – Liquids and Gases
Conductive
Liquids
Non-conductive
Liquids Gases Steam
Promag
Electromagnetic
Promass
Coriolis
Prowirl
Vortex
Prosonic Flow
Ultrasonic
T Mass
Thermal Mass
Deltatop
Differential Pressure
Low
viscosity
High
viscosity
Low
viscosity
High
viscosity
Fluid
Technology
3. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 3
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 5
Why Measure Mass?
Volume 1 Volume 2
Mass 1 = Mass 2
Masse 1
Volumen 1
Masse 2
Volumen 2
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 6
Mass Flow Measurement
Discontinuous, direct
m = Smi
Continuous, indirect
m = V • r
• •
•
V = Volume flow
r = Density
m = Mass flow
•
mi
4. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 4
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 7
Direct mass flow measurement of
liquids and gases
• Highest accuracy over a wide
flow range
• Multivariable technology:
additional process information
(density, temperature, volume,
concentration, …)
• Easy installation: no upstream
piping required
• Compact and robust design
• No moving parts
• Industry specific versions
• Safety first (ATEX, 3-A, EHEDG…)
Promass: Advantages at a glance
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Subject:
Coriolis Mass Flow Meter
From theory ...
PROline Promass 80/83
Applications
5. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 5
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 9
~ Qm
fR ~ r
~ T
= Mass flow
= Phase difference
r = Density
fR = Reference frequency
T = Temperature
= RTD resistance
Qm
fR
Qm
Coriolis Forces – Measuring Principle
6. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 6
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 11
m= Particles
w = Angular velocity
v = Radial velocity
Fc= Coriolis force
Fc = -2m • v • w
V = 0
V > 0
Fc
Fc
Coriolis Forces – Translation and Rotation
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 12
w = Angular velocity
Fc = Coriolis force
= Phase shift
A,B = Sensors
y = Amplitude
t = Time
~ Fc ~ m
•
Direct Mass Flow measurement
7. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 7
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 13
r
flfl
tfl
R
Vm
mm
c
f
2
1mt
fR mfl
fR = Resonant frequency
mt = Tube mass
mfl= Fluid mass
rfl = Fluid density
c = Constant
fR = ƒ(rfl)
Density Measurement
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Subject:
Coriolis Mass Flow Meter
… to vibrating systems adapted to
industrial environment.
PROline Promass 80/83
Applications
8. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 8
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 15
Features
• Mass, volume, temperature and
density information from one
measuring instrument
• High accuracy
• Large turndown
Installation
• Fit and forget design
• No inlet and outlet runs required
• Vibration compensated
• Compact design
Safety first
• Corrosive resistant materials
• Secondary enclosure as standard
• High-pressure design
• Hygienic design
• Fully Ex-certified
Traditional Coriolis Mass Flow Meters
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 16
Coriolis Flow Meter: Wide Application Field
Industries
Chemical
Oil & Gas
Pharmaceutical
Food & Beverages
Mining / Utility
Applications
Process: continuous direct mass / density
Concentration measurement
Transfer of liquid or gases
Custody Transfer of liquids or gases
Loading of tank trucks, trains, ships
High / Low pressure gases (Natural gas, CNG, ethylene)
Filling machines
9. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 9
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Subject:
Coriolis Mass Flow Meter
Which Sensor for which application?
PROline Promass 80/83
Applications
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 18
PROline Promass – Product segmentation
80 83
F
A
84
Custody
Transfer
Process
application
Basic
application
40
S
P
E
The Right Product for the Right Application
I
M
H
Promass F/A – Universal
• Highest accuracy
• Mass flow 0,05%
• Density 0,0005 g/cc
• DN: DN1 DN250
• T°< 200 350°C
Promass S/P – Optimized
S: Food / 3-A / EHEDG
P: Life Science / ASME-BPE
• Single measuring tube
• High accuracy
• Mass flow 0,1%
• Density 0,001 g/cc
• Low pressure drop
Promass E – Economic
Utility applications: demin, oils,
solvents, gases (N2, CO2)
• Replacement of mechanical
counters
• Short face to face length
Promass I/M/H - Application
I: Single straight tube
• Viscosity measurement
• Low pressure drop
• Minimal shear stress on fluid
M: Straight tubes
• High pressure
H: Tantalum wetted parts
• Highly corrosive media
10. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 10
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 19
Sensor/Transmitter Combinations Overview
Integral SSRemote Ex (Field)Integral Alu Remote (Wall)
83
80
83
8080
83 83
80
F/A Sensors S/P Sensors I/M/H Sensors E Sensor
Choose according to your Needs
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 20
High operating frequency 250 Hz
< fr < 1100 Hz
(typical piping frequency 50 Hz
< f < 150 Hz)
Balanced tube system (dual
tube or TMB)
Robust and Compact Secondary
Containment
Promass – High Immunity to Interferences
High operating frequency, balanced tube system and Containment
Dual tube TMB
11. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 11
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 21
Measurement
• Low pressure gases (e.g. natural
gas, air, ethylene, oxygen
• LPG (e.g. butane, propane)
• Cryogenics (e.g. liq. Nitrogen)
• Fuel oils and gasoline
• Alcohol
• Detergents and solvents
• Latex, Silicon oil
• Toluene, Benzene
And many more...
Ideal Sensor for gas
- most experience
- best zero point stability
- Stainless steel and Alloy C-22
versions
“The standard for almost
every application!”
Promass 80/83 F – The Most Universal Solution
DN8...250 :
0-100 kg/h up to 2.200 t/h
Temperature : -50 up to 350°C
Pressure : up to PN100
SIL 2
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 22
Promass F Sensor – Choice of Materials
Electrodynamic sensors
Exciter Secondary containment
Measuring tube
Promass A/F Promass H Promass I Promass E
A : DN1, 2 & 4
F : DN 8 - 250
Measuring tubes (2):
904L or Hastelloy C22
T° : -200 … +200°C
(special version up to
350°C)
Pressure : PN100 max
DN 15 – 25 (DN8/40/50
in prep)
Measuring tube (1):
Tantalum 2.5W
T° : -50 … +150°C
Pressure : PN40 max
DN 8 - 80
Measuring tube (1):
Titanium
T° : -50 … +150°C
Pressure : PN100 max
DN 8 - 50
Measuring tubes (2):
904L
T° : -50 … +125°C
Pressure : PN100 max
12. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 12
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 23
RDB palm oil
measurement at
50°C, 5.5 barg,
with 40st viscosity
and 0.9 SG
Olein Stearin RDB Palm Oil
Totalizer for the
blended oil
Steam tracing
Application
• Mass flow measurement of Olein,
Stearin and Palm oil
Requirements
• Mass measurement
• Accuracy batching, independant of
T° variations
• Hygienic design (3-A)
• Steam tracing
Solution
• Promass 80F
• Vertical installation for self
draining installation (batches)
Benefit:
• Improved quality of margarine due
to good ratio control
• Easy heat tracing
• Self draining
Blending: Continuous & Direct Mass, Heat Tracing,…
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 24
Transfer: Promass 83F / 6” for Rubber Cement
Application:
Hexane with rubber pellets. At the
process temperature the rubber pellets
are pretty soft and mix with the hexane.
Plugging was an issue with the PD
meters. Vertical installation was
preferred to avoid plugging and enable
easier draining. Upgrade to advanced
diagnostics was requested by the
customer after installation in order to
detect coating of the pipes.
Requested flow: 20 – 110 t/h
Pressure: 7 - 8 bar G
Temperature: 95°C
Density: 660 kg/m³
Viscosity: 3.500 cP
13. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 13
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 25
Application
• Flow measurement of highly
viscous fluid
• Flow rate : 300 kg/h (average)
from piston pump
• Viscosity : 40.000…150.000 cP
• T° : 20…90°C
• Pressure : 6 bar G
• Piping : DN100, suspended
Requirements
• Mass and T° for viscosity
control
Solution
• Promass 63F DN50
Full Scale = 70 t/h
Op. Flow = 300 kg/ (0.5% ofs)
7 cm/s in measuring tubes
Measuring results
• Specifications : 1.41 % or
• Dynamic PIPO: 0,50 % or
High viscous Fluids: Promass F Zero Point Stability
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 26
Promass F High temperature - Specifications
15. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 15
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 29
Truck/Train Loading: Promass on a Bio-Ethanol plant
Train Loading
Truck Loading
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 30
Truck Loading: Promass 84 on Bio-Diesel Loading
Promass 84F Coriolis Mass Flow Meter
The universal flow meter for custody transfer.
Together with the measured temperature
we are calculating standard volume by 15°C
16. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 16
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 31
Ship Loading/Unloading - Promass F DN250/10’’
• Direct mass measurement of flow rates up to 2200t/h
• Promass F is easy to install when space is limited
• Immune to disturbances (vibrations, flange misalignment, flow profile)
Support or straight pipe runs are not required
• High accuracy ± 0.1%
• Robust, reliable measurement
Promass F DN250/10” sensor made it possible
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 32
Promass F DN250 – The Big easy
Flange connections: DN250/10”:
DINPN16, 40, 64, ANSI Cl. 150,
300, 600, JIS10K, 20K
Reductions/expansion: DN150/6”, DN200/8”,DN300/12”
Flanges available on request
Maximum flow rate: 2200 t/h
Fluid temperature: -50...+200 °C
Ambient temperature: -20...+60 °C
Measuring tube material: 1.4404/316L
Accuracy:
• Mass flow rate (liq.)
• Mass flow rate (gas)
• Density
• Temperature
±0.1% o.r. (±zero point stability)
±0.35 % o.r. (±zero point stability)
±0.0005 kg/dm3
±0.5 °C
±0.005 x fluid temperature [°C]
Ex approvals: ATEX II2GD EEx D / EEx de
FM/CSA Cl I Div. 1
TIIS (in preparation)
Big in Flow, Small in Dimensions!
SIL2
17. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 17
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 33
Design with Modern Technology
Maximum
Amplitude
No
Mouvement
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 34
Technical Data
Flow splitter material (cast): CF3M Flange material: 316L
102,26 mm
19. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 19
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 37
National transportation
company
Ship loading &
unloading: Custody
transfer of gasoline,
diesel oil, kerosene
Ship loading & Unloading with Promass 83F DN250/10”
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 38
Density Measurement in a
by-pass with Promass F
In-line Density measurement
with Promass F
for measurement of milk fat content
Multivariable technology: Mass, Volume & Density
20. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 20
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 39
Application
• Measurement of sweet
condensate milk (10 t/h; 1,29-
1,30 g/cc; 55-60°C)
Requirements
• Mass AND density
• High accuracy required on both
variables
• Hygienic design (3-A)
• CIP and SIP up to 150°C
Solution
• Promass 83F DN80 with special
density calibration in factory
and Profibus DP
communication
• Triclamp with 3-A approval
Benefit:
• High accuracy
• Easy cleaning
Promass F: Highest Accuracy for Mass Flow and Density
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 40
Solution for an automatic Beer Extract Measurement
Special Software developed for Promass in
combination with an automated solution
done by a systempartner of Germany. This
solution enables an automated and
optimizes brew process.
No more manual spindling
necessary to detect the end of the
brew process.
• Germany
• Öttinger Brewery
• Solution for an:
Automatic beer extract
measurement
• Q1/2004
21. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 21
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 41
Not only Highly Viscous Fluids ... but also Gases!
Flow measurement of highly viscous fluid
Viscosity from 40.000 to 150.000 cP !!
300 k/g (pulsating) in a Promass 63F DN50
=> measuring error < 0.5% o.r.
Accurate measurement of Nitrogen
consumption
Nitrogen gas at 40 bar - 100 - 2000 Nm³/h
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 42
Natural gas: Promass 83F 6”/DN150
23. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 23
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 45
Promass 40/80/83 E – The Economic Solution
Measurement
• Gases (e.g. air, O2, N2, ...)
• Demin water
• Fuel oils and gasoline
• Vegetable oils, animal fats
• Alcohol
• Detergents and solvents
- Short face-to-face length
- Replacement of mechanical counters
2 sligthy bended tubes
DN8...80 : 0-100 up to 180 t/h
Temperature : -50 up to 140 °C
Pressure : up to PN100
(SS 904L/316L wetted parts)
“The Cost-effective solution for
utilities applications!”
Ra < 0.8 µm
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 46
Promass 80/83 A - When Every Drop Counts
Measurement
• High-pressure gases
• Low pressure gases
(e.g. helium, hydrogen, air)
• Additives and flavors
• Perfume
• DI-water
• Insulin
• Glue
“Sometimes the little things
in life count the most!”
Ra < 0.8 µm
Ra < 0.4 µm
1 sligthy bended tube
DN1, 2 & 4 :
0-100 g/h up to 450 kg/h
Temperature : -50 up to 200°C
Pressure : up to PN400
(SS 904L/316L or Alloy C22 wetted parts)
24. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 24
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 47
Promass 80/83 S – The Optimized Solution for F&B
Ra < 0.8 µm
Measurement
• Milk, cheese
• Beer, drinks
• Yogurt with or without fruit
pieces
• Syrup/Molasses
• Chocolate
• Detergents, solvents
- Single-tube design
- Drainable
- Low pressure loss
“The optimized Solution for
the Food Industry”
1 sligthy bended tube
DN8...50 :
0-100 up to 70 t/h
Temperature : -50 up to 150°C
Pressure : up to PN100
(Stainless Steel wetted parts)
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 48
Promass 80/83 P – The compliant Solution for LS
Ra < 0.4 µm, electropolished
Measurement
• WFI water, DI-water
• Insulin
• Blood plasma (sterile)
• Cosmetics, Perfume
• Fermentation
• Filtration
• Chromatography
• Media preparation
- Single-tube design
- ASME-BPE compliant
“The compliant solution for
Life Science applications”
1 sligthy bended tube
DN8...50 :
0-100 up to 70 t/h
Temperature : -50 up to 200°C
Pressure : up to PN100
(316L/1.4435, low delta ferrite)
25. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 25
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 49
Promass 80/83 I - The Specialist
Measurement
• Yogurt with fruit pieces
• Syrup/Molasses
• Chocolate with nut pieces
• Blood plasma (sterile)
• Colors
• Cosmetics
- Single straight measuring tube
- In-line Viscosity measurement
“The straight design for a
straight measurement!”
1 single straight tube
DN8…80 :
0-100 up to 180 t/h
Temperature : -50 up to 150°C
Pressure : up to PN100
(Titanium Gr2 or Gr9 wetted parts)
Ra < 0.8 µm
Ra < 0.4 µm
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 50
Promass I: Sensor Design
Electrodynamic sensors
Inner frame
Secondary containment
Measuring tubeExciter Counter pendulum
Nitrogen
Balanced single straight tube system
26. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 26
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 51
Transfer – Liquid Chocolate Mass Flow
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 52
Promass 83I - 4 x Measuring Parameters
D = Phase shift
m = Mass flow
W = RTD resistance
fR = Resonant frequency
r = Density
T = Temperature
= Dynamic viscosity
D = Tube damping
•
DD ~ m
fR ~ rr
WW ~ T
D ~
•
27. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 27
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 53
Exploitation of torsional oscillation
Principle of operation
The pendulum is attached to the middle of the oscillating measuring
tube, and induces torsional oscillations into the measuring tube by a
frequency about 800Hz
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 54
Velocity of
rotation v
q
Velocity
profile v(r)
q
measuring tube
fluid
Viscosity Measurement with Promass 83I
Torsional oscillation of the
measuring tube creates a shear rate
of the fluid
Shear force on the inside of the tube
is a function of shear rate and
viscosity
Shear force defines the necessary
drive power
Through measurement of the drive
current, the required drive power
and hence the viscosity can be
calculated
28. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 28
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 55
What you get....
-> PROline Promass 83I - Coriolis Mass Flow instrument
-> Viscosity calibration
-> Special density calibration
-> Flow calibration
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 56
Quality control
(comparison between lab and
process measurement)
Process control
Trend / logging of data incl.
viscosity
Quality control
(limit values determined in the
process)
OK
possible with some
efforts
Requires knowledge
about fluid in detail
Application areas for Process viscosity measurement
29. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 29
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 57
“Green” application: Detection of Lactoserum
Detection of lactoserum in a
yaourt process
Fluid
• White mass or Lactoserum (‘petit lait’)
Application
• Detection of lactosérum to prevent
quality problems
• Typical values for viscosity:
White mass = 50 cP
Lactoserum = 25 cP
Set point = 37 cP
Benefits
• Robust detection, hygienic design and one
single instrument for mass flow and
viscosity.
• Measurement more reliable than with
other principals: Density, Conductivity,
Optical
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 58
Heating of the Promass F compact
with a Heating Jacket
Immunity to Stress: Heating Jacket up to 350°C
Heating of the Promass M remote
with Heating jacket (new design)
30. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 30
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 59
Orientation when Heating
Ideal installation position,
- for all certified heating media
- for all certified temperature ranges.
Recommended in certain situation,
but NOT when using steam
OK if fluid T° <200°C
If fluid T°>200°C, the remote
version for heating is
recommended
Heating jacket,
New design
Remote version,
for heating
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Subject:
Coriolis Mass Flow Meter
Transmitter’s functionality's according
to the customers’ needs
PROline Promass 80/83
Applications
31. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 31
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 61
Promass 80 - The Cost-effective Solution
Communication
0/4..20mA; 0...1kHz
Digital communication: HART + Profibus PA
Service interface (Connection to Tooling)
Up to 5 cable glands
Human Machine Interface (HMI)
Quick Setup for a fast and easy commissioning
Push-button operation
2-line back-lit display: Display in plain text
Measuring values
m, V, r, T
Data storage
S-DAT™
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 62
Communication
Flexible I/O-Modules
HART, Profibus PA and DP, FF
Service interface (connection to Tooling)
Human Machine Interface (HMI)
Quick Setup for a fast and easy commissioning
Touch Control operation allows programming
without opening of electronics
4-line back-lit display
Modular Software concept
Concentration calculation, batching functions
and advanced diagnostics
Data storage
S-DAT™, T-DAT™, F-CHIP™
26 different
configurations
Promass 83 - The Taylor-Made Solution
32. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 32
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 63
Programming - Quick Setup
Quick Setup “Commissioning”
PROline
• Rapid and easy
commissioning
• Guided parameter
sequence
• Dynamic structure
(corresponding to
version)
Application-specific Quick Setup
for Promag 53 and Promass 83
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 64
Data Management - S-DAT , T-DAT and F-CHIP
F-CHIPTM
T-DATTM
S-DATTM
Sensor S-DAT™
Sensor data
• Calibration data
• Diameter
• Serial number
Transmitter T-DAT™
Transmitter data (manual backup)
• HART address
• Ranges
• Units / Values
Function F-CHIP™
• Batching Software
• ECC Software
• Advanced Diagnostics
33. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 33
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 65
Promag 53/Promass 83 - Pulsating Flow Measurement
mA
t
S
A
S = A
t
+Q
Working principle
Peristaltic hose pump
Delivery characteristic
Peristaltic hose pump
Measuring mode “pulsating flow”
signal output (current or frequency)
Flow components outside the output
range are buffered
Set off flow signal within measuring
range at signal output
• stable signal output
(regulation/control)
• net transfer flow quantity is output
(external totalizer)
-Q
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Subject:
Coriolis Flow Meter
Installation guidelines
PROline Promass 80/83
Applications
34. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 34
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 67
Installations Hints – Easy to Install
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 68
Installation – Vertical without special Supports
Vertical Installation
• No inlet and outlet runs
• No special supports
• Recommended for batch
processes (discontinuous)
35. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 35
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 69
Installation – Horizontal without special Supports
Horizontal Installation
• No inlet and outlet runs
• No special supports
• To be applied for continuous
processes
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Subject:
Coriolis Mass Flow Meter
Highest accuracy and repetability
PROline Promass 80/83
Applications
36. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 36
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 71
Our calibration rig is worth its weight in Gold !!
Accredited, only accredited calibrations are credible calibrations.
± 0,015%
measured error !!
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 72
An unbroken chain of trust - Traceability
The international Prototype Kilogram
(BIPM) Paris
Uncertainty = +/_ 0.000001%
+/- 10 microgram
The National Standard Kilo (National
Institute of Metrology METAS)
Uncertainty = +/_ 0.0001%
+/- 0.5g/500 kg, replica No 38
Gravimetric scales (E+H Flowtec)
Verification of scales every 2 weeks
Class F2 Weights +/- 0.8g/50 kg = 0.0016%
The calibration Rig (E+H Flowtec)
PremiumCal rigs in Reinach and Greenwood
Uncertainty +/- 0.015%
Accredited acc. to ISO 17025
The meter (in customer’s production plant)
Promass 83/84F DN 08 – 250
0ption 0.05% (only possible if the reference is far better !!)
37. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 37
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 73
PremiumCal - Calibration Rig for ALL Promass
FCP 7.1.5 (4 t scale) 0.015% gravimetric
FCP 7.1.5 (400kg scale) 0.015% gravimetric
FCP 6.5 (cylinder) 0.021% volumetric
4t Scale 400kg Scale Cylinder
DN100 … DN250 DN25 … DN150 DN8 … DN15
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 74
PremiumCal – Swiss Accreditation Service
Official download of certificate from the Swiss Accreditation Service website:
www.sas.ch or www.seco.admin.ch/sas/index.html?lang=en
38. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 38
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
Flow Measurement – Applications Window
Flow
Application window
Slide 75
High Accuracy - New ‘Flat’ specifications
New specification:
Old specification:
Example:
Promass 83F25
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 76
High Accuracy - New ‘Flat’ specifications
Linear specifications for a turndown of 25:1
linear specification 25:1
Accuracy on Mass Flow for Liquids for Gases
• F ± 0.05% o.r. ± ZS ± 0.35% o.r. ± ZS
• A ± 0.10% o.r. ± ZS ± 0.50% o.r. ± ZS
• E ± 0.20% o.r. ± ZS ± 0.75% o.r. ± ZS
39. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 39
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 77
Simple specification throughout the documentation
Screenshot from Applicator 10.07:
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 78
Density Measurement of Liquids - Specifications
Densityg/cc
Temperature °C
°0 °80°20 °40 °60
0.8
1.8
1.0
1.2
1.4
°200
Validity of E+H
Standard Density
Accuracy statement
± 0.01 g/cc
Validity of E+H
Field Density
Accuracy statement
± 0.0005 g/cc
Validity of E+H
Special Density
Accuracy statement
± 0.001 g/cc
40. VIK lezing - Go with the Flow 2012
Coriolis flowmetingen
Endress+Hauser SA/NV
Jean-Jacques Renaux – Product Manager Flow 40
Subject:
Owner:
Renaux Jean-Jacques
Creation date:
01/06/2004
PROline Promass Product Presentation
PROline Promass 80/83
Applications
Folie 79
Liquids & Gases: Influence of Medium Properties
Medium
characteristics
Effect on the accuracy of mass flow
Temperature When there is a difference between the temperature for zero point
adjustment and the process temperature, the typical measured error of
the Promass sensor is ±0.0002% of the full scale value / °C.
Static pressure Static pressure has a predictive effect on the accuracy of Coriolis mass
flow meters. This effects is dependant of the sensor type and nominal
diameter. Tables show the effect on accuracy of mass flow due to a
difference between calibration pressure and process pressure
Viscosity Viscosity has a negligible effect on the accuracy of Coriolis mass flow
meters. It has an effect on the Zero Point of the instrument. This effect
can be compensated by carrying out a static or dynamic zero point
adjustment during commisionning.
Density Density has a negligible effect on the accuracy of Coriolis mass flow
meters.