Pavers can be used in a number of settings in order to enhance the landscape or the features of a patio pavers Aventura or area on a property.

1. Proper Uses of Thin Brick Pavers
A common question that we encounter is whether you can use a thin paver on top of base material.
The answer is not absolute. In reality, it depends on the circumstances of the project and the
proficiency of the crew or individual installing the pavers in the first place. The one aspect of the
project that must remain constant if considering the use of thin pavers over base is that the area to be
paved must only be used as a pedestrian area that won't endure the weight of vehicular traffic.
Using a thin paver on compacted base is typically frowned upon within the paver industry. They are
normally used to remodel an existing concrete, tile, or acrylic surface. The only difference, however,
between using a thin paver and thick paver over compacted base is that you cannot compact the thin
paver once the project is complete. In both instances, the base material is compacted, but once a
thick paver project is completed it is standard practice to spread joint sand over top and compact the
field once or twice.
The quality, thickness, and careful compaction of the base material is truly what gives any
new driveway pavers Broward County area its longevity and as long as this crucial step is tended to
appropriately, then the longevity of the paver project will not be compromised, regardless of the paver
thickness.Most paver projects will vary depending on access, site conditions, project size and of
course, the weather. These situations can have an overall impact on your project from a timing stand
point. Careful consideration should be taken to determine the time to start the paver installation.
Always try to minimize or avoid any traffic on the prepared areas.
When starting to install pavers it is best to snap a true straight chalk line on the surface of the bedding
sand or pull a true straight string line above the surface of the bedding sand at the finished elevation
of the pavers. This will help as a guide for maintaining straight joint lines and will also allow the
installer to make adjustments in the alignment of the pavers.Buildings and concrete curbing are
generally not straight and should not be used for establishing straight joint lines. The use of string
lines is essential to determine the true straightness of the edge as well.
There are some brick pavers Broward County with spacer bars on their sides. These will maintain a

2. minimum joint width and allow the bedding and jointing sand to enter between each paver. Pavers
with spacer bars are generally not laid in snug against each other since a string line will provide
consistent joint spacing.One of the most widely used methods for the installation of pavers is hand
installation of each paver. It is best to install a single row of pavers along one of the true straight lines
that you have pulled or above the bedding sand.
This will give you a straight and true line off which to work. Once this row is established, you can
continue to work outward into the field with the rest of the pavers. Always make sure to periodically
check your joint lines to make sure they are true and straight. If not, adjustments to the pavers can be
made as you continue installing. Pavers should be installed hand tight. The best method is to place a
paver against another one and let it slide down into the bedding sand. Do not kick or tap the pavers
into place as this can throw your lines out of true straightness.
Several types of pervious pavements are used and readily available, including pervious concrete,
pervious asphalt, concrete grid pavers, plastic grid pavers and resin coated gravel. Each of these
green types of pervious pavements has its own benefits and recommended uses. A Landscape
Architect can help you determine which system is best for you and can help you with the design.As
the paver installation progresses, the string lines will help minimize the need for small trim pieces.