The document lists various power electronics projects in areas such as power converters, power drives and control, renewable energy sources, and power systems. Some example projects described include resonance propagation of parallel-operated dc-ac converters, peak current mode control for switching dc-dc converters, and sensorless control of permanent magnet synchronous motors. Other projects focus on grid-connected inverters for solar PV systems, battery energy storage for solar integration, and flexible ac transmission systems devices like UPFC and DVR.
Marel Q1 2024 Investor Presentation from May 8, 2024
Final year Ieee power electronics project titles 2013 2014
1. 1POINTER TECHNOLOGY
IEEE ELECTRICAL PROJECT LIST -2013-2014
POWER CONVERTERS
1) Resonance propagation of parallel-operated dc-ac converters with LCL filters
Charging applications
2) Peak current mode bi frequency control technique for switching dc–dc converters in DCM
with fast transient response and low emi
3) Single-switch soft-switched isolated dc–dc converter
4) Single-phase to three-phase power converters: state of the art
6) Reducing storage capacitor of a DCM boost PFC converter
7) Scheme for combined multiport dc/dc converters
8) On the limit of the output capacitor reduction in power-factor correctors by distorting the line
input current
10) Analysis and design of an ac-dc single-stage buck-boost full-bridge converter
11) Practical design considerations for a LLC multi-resonant dc-dc converter in battery
12) On the limit of the output capacitor reduction in power-factor correctors by distorting the line
input current
13) Very high power bidirectional dc-dc converter for aerospace applications
14) Non isolated zv-zcs resonant pwm dc–dc converter for high step-up and high-power
Applications
15) Ac/dc converter free led driver for lightings
16) Bidirectional dual active bridge series resonant converter with pulse modulation
17) A comparative study of a new ZCS dc–dc full-bridge boost converter with a ZVS activeclamp converter
18) High-frequency resonant SEPIC converter with wide input and output voltage ranges
19) Analysis of pwm frequency control to improve the lifetime of pwm inverter
20) A low cost fly back CCM inverter for ac module application
21) A novel quasi-resonant three-phase soft-switching inverter
22) Extended range ZVS active-clamped current- fed full-bridge isolated dc/dc converter for fuel
cell applications: analysis, design and experimental results
24) Generalized design of high performance shunt active power filter with output lcl filter
25) Direct single-stage power converter with power factor improvement for switched mode
power supply
26) Hybrid multilevel inverter using is pwm technique for fuel cell applications
27) A three-phase three-level voltage source inverter with a three-phase two-level inverter as a
main circuit
28) A multi-output high frequency cyclo inverter operation for induction-heating cooking
appliances - harmonic study
29) Analysis, design and control of zero-voltage switching quasi-resonant-positive output super
Lift Lou converter
30) A novel control scheme of synchronous buck converter for ZVS in light-load condition
31) Multilevel inverter for grid-connected PV system employing digital pi controller
32) Bridgeless high-power-factor buck converter
No: 41, Opposite to Nathella Jewellery, south usman Road, T.Nagar, Chennai-600 017.
Ph – 044 342323407; Mobile –9500139248, 9043350456
Email: onepointertechnology@gmail.com
website: www.1pointer.com
2. 1POINTER TECHNOLOGY
34) Digital simulation of an interline dynamic voltage
35) Isolated two-transistor zeta converter with reduced transistor voltage stress
37) Dc–ac cascaded h-bridge multilevel boost inverter with no inductors for electric/hybrid
electric vehicle applications
38) Analysis and implementation of a fixed-frequency LCLC resonant converter with c
capacitive output filter
39) A dual full bridge resonant class-e bidirectional dc-dc converter
40) Isolated Two-Transistor Zeta Converter with Reduced Transistor Voltage Stress
41) Resonance-assisted buck converter for offline driving of power led replacement lamps
42) Control of TI-SEPIC converter for optimal utilization of pv power
43) A novel capacitor-switched regenerative snubber for dc/dc boost converters
44) A low-power asynchronous step-down dc-dc converter for implantable devices
45) A Comparative Study of a New ZCS DC–DC Full-Bridge Boost Converter with a ZVS
Active-Clamp Converter
47) A Single-Phase Z-Source Buck–Boost Matrix Converter
48) Average Inductor Current Sensor for Digitally Controlled Switched-Mode Power Supplies
49) Design and Development of Very High Frequency Resonant DC–DC Boost converters
50) Dynamic Response Analysis of DC–DC Converter with Super capacitor for Direct
Borohydride Fuel Cell Power Conditioning System
51) High-Frequency Resonant SEPIC Converter with Wide Input and Output Voltage Ranges
52) High-Power Bidirectional DC–DC Converter for Aerospace Applications
53) Interleaved Buck Converter Having Low Switching Losses and Improved Step-Down
Conversion Ratio
57) Reducing Storage Capacitor of a DCM Boost PFC Converter
58) Sensor less Current Estimation and Sharing in multiphase Buck Converters
59) Single-Stage, Universal-Input AC/DC LED Driver with Current-Controlled Variable PFC
Boost Inductor
60) A Design Procedure for Optimizing the LLC Resonant Converter as a Wide Output Range
Voltage Source
62) A High-Dimming-Ratio LED Driver for LCD Backlights
63) A ZVS Interleaved Boost AC/DC Converter Used in Plug-in Electric Vehicles
64) Analysis on Center-Tap Rectifier Voltage Oscillation of LLC Resonant Converter
68) Efficiency Optimization in Digitally Controlled Fly back DC–DC Converters over Wide
73) Distortion Behavior Analysis of General Pulse-Width Modulated Zeta PFC Converter
Operating in Continuous Conduction Mode
74) Harmonic Distortion Optimization of Cascaded H-Bridge Inverters Considering Device
Voltage Drops and Non-Integer DC Voltage Ratios
75) Leakage Current Reduction in a Single-Phase Bidirectional AC–DC Full-Bridge Inverter
77) Single-Phase Dual-Output Inverters with Three-Switch Legs
78) Tapped-Inductor Buck HB-LED AC–DC Driver Operating in Boundary Conduction Mode
for Replacing Incandescent Bulb Lamps
77) A Five-Level Inverter Topology with Single-DC Supply by Cascading a Flying Capacitor
Inverter and an H-Bridge
78) A new Hybrid Cascaded H-Bridge Multilevel inverter - Performance analysis
No: 41, Opposite to Nathella Jewellery, south usman Road, T.Nagar, Chennai-600 017.
Ph – 044 342323407; Mobile –9500139248, 9043350456
Email: onepointertechnology@gmail.com
website: www.1pointer.com
3. 1POINTER TECHNOLOGY
79) A ZVS Interleaved Boost AC-DC Converter Used in Plug-in Electric Vehicles
80) A Voltage-Balancing Controller in Single-Phase Cascaded Multilevel Converters with
Coupling Effect Reduction
82) Single-Switch High Boost-up Converters by using Transformer Voltage Multiplier Cell
83) High Step-Up Non isolated ZVZCS Resonant PWM DC–DC Converter for and High-Power
Applications
84) Dynamic response improvement in H-bridge enhanced buck converter
85) Cascade dual-buck full-bridge inverter with hybrid PWM technique
86) Z-source three-phase four-switch inverter with DC link split capacitor and comprehensive
investigation of z-source three-phase four-switch inverters
87) Three-Phase Dual-Buck Inverter With Unified Pulse width Modulation
88) An customized PWM Method for DC-DC converter Based Modular Multilevel Converters
89) A New Modulation Method for the exemplary Multilevel Converter by using Fundamental
Switching Frequency
90) A cascaded Five-Level Inverter Topology with Single-DC Supply by a Flying Capacitor
Inverter and an H- Bridge
POWER DRIVES CONTROL
1) speed control of induction motor using fuzzy-pi controller
2) reduction of emi in ac drives through dithering within limited switching frequency
range
3) soft computing technique for double boost converter fed PMDC drive
4) A simple position sensor less control strategy for Four-switch three-phase
brushless dc motor drives
5) Input Admittance Expressions for Field-Oriented Controlled Salient PMSM Drives
6) A Simple Startup Strategy Based on Current Regulation for Back-EMF-Based
Sensor less Control of PMSM
7) Analysis and Mitigation of Torsional Vibration of PM Brushless AC/DC Drives
with Direct Torque Controller
8) Low-Cost Direct Torque Control Algorithm for Induction Motor Without AC Phase
Current Sensors
9) Simulation of SVPWM based FOC of CSI fed induction motor drive
10) Improvement of startup torque of three phase induction motor operating with
single phase supply
11) Loss-Minimizing Flux Level Control of Induction Motor Drives
12) Sensor less variable speed single-phase induction motor drive system
13) Speed control of induction motor drive using universal controller
14) A simple and low-cost method for three-phase induction motor control in highspeed applications
15) Z converter control of a V/f induction motor drive
16) Three-level inverter fed induction motor
17) A new approach for efficiency optimizing of single-phase induction motors
No: 41, Opposite to Nathella Jewellery, south usman Road, T.Nagar, Chennai-600 017.
Ph – 044 342323407; Mobile –9500139248, 9043350456
Email: onepointertechnology@gmail.com
website: www.1pointer.com
4. 1POINTER TECHNOLOGY
18) A Five-Level Diode-Clamped PWM Inverter With a DC-Voltage-Balancing Circuit
for a Motor Drive
19) Dynamic Response Analysis of DC–DC Converter using Super capacitor
20) Seamless Boost Converter Control under the Critical Condition for a dc Power
Conditioning System
21) Interleaved Buck Converter with Low Switching Losses and Improved Step-Down
22) Conversion Ratio
23) High Efficiency AC–AC Power Electronic Converter for Domestic Induction
Heating applications
24) No-Load Power Reduction Technique for AC/DC Adapters
25) PI and Sliding Mode Control of a CUK Converter
26) fuzzy sliding mode speed controller for pm synchronous motors with a load
torque observer
27) dc bus voltage clamp method to prevent over-voltage failures in adjustable speed
drives
RENEWABLE ENERGY SOURCE
1) Enhanced Decoupled Double Synchronous Reference Frame Current Controller for
Unbalanced Grid-Voltage Conditions A Stationary Reference Frame Grid
Synchronization System for Three-Phase Grid-Connected Power Converters Under
Adverse Grid Conditions
2) DC Offset Error Compensation for Synchronous Reference Frame PLL in Single-Phase
3) Grid-Connected Converters Robust Predictive Current Controller Based on a Disturbance
Estimator in a Three-Phase Grid-Connected Inverter
4) Battery Energy Storage for Enabling Integration of Distributed Solar Power Generation
5) High efficiency switched capacitor buck-boost converter for pv application
6) modified grid-connected current source inverter for multi-string pv system
7) digital simulation of single and interleaved soft switching boost converter for pv
8) interleaved soft-switching boost converter for photovoltaic power-generation system
9) single-phase seven-level grid-connected inverter for photovoltaic system
10) multilevel inverter for grid-connected pv system employing digital pi controller
11) an integrated four-port dc/dc converter for renewable energy applications
12) A Five-Level Single-Phase Grid-Connected Converter for Renewable Distributed
Systems
13) An Adaptive Control System for Three-Phase Photovoltaic Inverters Working in a
14) Polluted and Variable Frequency Electric Grid control Scheme for Photovoltaic ThreePhase inverters to Minimize Peak Currents During Unbalanced Grid-Voltage Sags
15) Full Feed forward of Grid Voltage for Discrete State Feedback Controlled GridConnected Inverter With LCL Filter
16) Design and performance analysis of water pumping using solar PV
17) Smart grid adds value to solar photovoltaic’s
18) Smart Solar Home System with Safety Device Low Voltage Alert
19) Single-stage boost inverter reliability in solar photovoltaic applications
No: 41, Opposite to Nathella Jewellery, south usman Road, T.Nagar, Chennai-600 017.
Ph – 044 342323407; Mobile –9500139248, 9043350456
Email: onepointertechnology@gmail.com
website: www.1pointer.com
5. 1POINTER TECHNOLOGY
20) A comprehensive assessment tool for solar PV impacts on low voltage three phase
distribution networks
21) Increasing the efficiency of steam power plant with the help of solar energy
22) Modeling of DC-DC converter for solar energy system applications
23) Wide input range hybrid DC-DC conversion system for solar energy harvesting
24) Solar photovoltaic power conversion using modular multilevel converter
25) A monitoring system for the use of solar energy in electric and hybrid electric vehicles
26) A High Efficiency Solar Array Simulator Implemented by an LLC Resonant DC-DC
Converter
27) Solar integrated current-fed quasi-Z-source inverter with power buck-boost
28) Power-electronic grid supply of AC railway systems
29) Modular single-phase trans-Z-source inverter for multi-input renewable energy system
30) Single-stage boost inverter reliability in solar photovoltaic applications
31) Single-Phase Grid-Connected DC Offset Error Compensation using Synchronous
Reference Frame PLL
32) A ZVS Grid-Connected Three-Phase Inverter
33) Design and Tuning of a Modified Power-Based PLL for Single-Phase Grid-Connected
Power Conditioning Systems
POWER SYSTEMS
1)
2)
3)
4)
5)
6)
single phase unified power flow controller (UPFC): simulation and construction
voltage sag/swell compensation in an interline dynamic voltage restorer
Control and testing of a dynamic voltage restorer (DVR) at medium voltage level
Emergency Control in Distribution Systems
power flow assessment in transmission lines using simulink model with UPFC
unified power quality conditioner (UPQC) with voltage dips and over-voltages
compensation Capability
7) Modeling and digital simulation of the UPFC using IDVR
8) A New Approach to Multifunctional Dynamic voltage Restorer Implementation for
9) A Novel DC Capacitor Voltage Balance Control Method for Cascade Multilevel
STATCOM
10) Probabilistic Worth Assessment of Distributed Static Series Compensators
No: 41, Opposite to Nathella Jewellery, south usman Road, T.Nagar, Chennai-600 017.
Ph – 044 342323407; Mobile –9500139248, 9043350456
Email: onepointertechnology@gmail.com
website: www.1pointer.com