SlideShare ist ein Scribd-Unternehmen logo
1 von 2
Lindsay Meyer
Chris Devigny
Laboratory Report, Final – 8 March 2006
University of Notre Dame
CHEM 21224
Spring 2006
Title of Experiment: “Reduction of an Aldehyde or Ketone”
Purpose: The purpose of completing this laboratory experiment was to devise a method for
reducing an aldehyde or ketone based on: a substrate, reagent(s), and reaction mechanisms.
Equation:
Procedure:
Reagents were obtained: 9-fluorenone = 1.034g; sodium borohydride = 0.543g. An
initial TLC was taken for the purposes of determining reaction progress. Ether was chosen as the
solvent and added in the amount of roughly 10mL. The reaction was performed in an
Erlenmeyer, which was kept cool on ice. The mixture was mechanically stirred on high for 45
mins, with the progress being monitored every 10-15 mins. While it is likely that the reaction
did not go to completion as the “dots” never converged to signal the formation of 9-fluorenol, the
progress was notable. Due to time constraints, the reaction was halted. Weak hydrochloric acid
(3.0M) was added to the mixture to decompose the excess sodium borohydride. Water, in an
equivalent amount was also added to extract the organic product. The aqueous layer was
removed and the ether layer was Roto-vapped to collect the crude product, 9-fluorenol, which
had a distinct yellow color. An initial melting point was experimentally determined to be: 70-
72°C. Recrystallization was not performed since it would have been irrelevant and futile in
producing a product with an enhanced –OH character.
Observations/Data/Interpretations:
Mass 9-fluorenone = 1.034g
Mass sodium borohydride = 0.534g
MP1 = 70-72°C
Color = bright yellow
IR = see attached; showed a broad, but weak peak at 3209, in the –OH region. Another peak
occured at 1715, in the carbonyl region. The rest of the IR showed the aromatic stretch.
--
Stoichiometric Calculations
Number of moles start = 1.0g C13H8O * 1 mol C13H8O / 180g C13H8O = 0.0056mol C13H8O
Theoretical Yield = 0.0056mol C13H8O * (4mol C13H10O / 1mol C13H8O) * (178g C13H10O / 1 mol
C13H10O) = 3.95g C13H10O
Moles NaBH4 start = 0.0056mol C13H8O * 1mol NaBH4 / 4mol C13H8O) = 0.014mol NaBH4
Grams NaBH4 start = 0.014mol NaBH4 * 37.84g NaBH4 / 1mol NaBH4 = 0.5298g NaBH4
--
The melting point of the product, what was to be 9-fluorenol, was lower than the
expected value for the reagent, 9-fluorenone. A critical appraisal of the experimental techniques
showed that the correct quantities of reagents were used (see stoichiometric calculations above).
The disparity was likely introduced in the sodium borohydride, a reagent that quickly
decomposes in air. Taking reagent from a weigh boat near the balance was a poor idea, because
it had probably been saturated and rendered useless, in terms of reactivity. This explains the
melting point of the “product” – a figure that was less than the expected melting point of the
starting material. Impurities were introduced which ultimately lowered the melting point. The
“peak” we see in the –OH region, could possibly be due to residual water in the product. The
sodium borohydride was mostly to blame in this experiment in terms of error. In the future,
recalling this unfruitful experience, will serve as a helpful reminder to take care in controlling
reagents, especially those that decompose. However, the process that was used to reduce the
ketone to an alcohol was in principle correct. The methodology was sound, a good solvent was
chosen, and the measurements were correct.
The final “product” – as it was obtained from Roto-vapping off the ether solvent, was
likely mostly reagent 9-fluorenone, based on the melting points and an IR of functional groups.
The carbonyl peak was very distinct and large, whereas the alcohol peak was not distinct, and
may have been due to water. The unknown factor in this experiment was the extent to which
sodium borohydride decomposed. It seems that nearly all of it was useless, based on the amount
of –OH character seen in the IR spectrum. Repeating this experiment under much tighter
controls would prevent any future problems regarding reagent reactivity. With the developed
procedure, future attempts would most likely produce 9-fluorenol, the alcohol, in much higher
yields. This could be determined again, with an IR, and taking a melting point. The theoretical
melting point for 9-fluorenol is 152-158°C and we would expect the melting point to be slightly
under that value (to account for unavoidable impurities introduced experimentally).
Recrystallization would also be utilized, to help purify the product further. In this trial,
recrystallization was not attempted as it would not have been useful. The –OH character was so
weak, that perhaps recrystallization would have introduced additional impurities that would have
degraded the alcoholic nature of the product. Although this is debatable, it is certainly a delicate
balance and again – very unnecessary since there wasn’t a lot of physical 9-fluorenol product to
purify. Essentially, the entire procedure was one extended purification of 9-fluorenone, and
recrystallization would not have rendered any more alcohol product, from the predominating
ketone.

Weitere ähnliche Inhalte

Was ist angesagt?

Dakin rearrangemnt
Dakin rearrangemntDakin rearrangemnt
Dakin rearrangemntVIJAYS222
 
Preparation of p-bromoaniline from Acetanilide
Preparation of p-bromoaniline from AcetanilidePreparation of p-bromoaniline from Acetanilide
Preparation of p-bromoaniline from AcetanilideDr. Krishna Swamy. G
 
Pinacol pinacolone rearrangement
Pinacol pinacolone rearrangementPinacol pinacolone rearrangement
Pinacol pinacolone rearrangementSavitaKumari48
 
Heterocyclic chemistry
Heterocyclic chemistry Heterocyclic chemistry
Heterocyclic chemistry Taj Khan
 
Preparing alcohols
Preparing alcoholsPreparing alcohols
Preparing alcoholsSiti Alias
 
Hydrogenation (3)
Hydrogenation (3)Hydrogenation (3)
Hydrogenation (3)Usman Shah
 
Preparation and standardization of various molar and normal solutions
Preparation and standardization of various molar and normal  solutionsPreparation and standardization of various molar and normal  solutions
Preparation and standardization of various molar and normal solutionsnehla313
 
Pyridine - Syntheis, Reactions and Medicinal uses
Pyridine - Syntheis, Reactions and Medicinal usesPyridine - Syntheis, Reactions and Medicinal uses
Pyridine - Syntheis, Reactions and Medicinal usesDr Venkatesh P
 
Stereoselective & stereospecific reaction B.Pharm
Stereoselective & stereospecific reaction B.Pharm Stereoselective & stereospecific reaction B.Pharm
Stereoselective & stereospecific reaction B.Pharm AZCPh
 
Polynuclear Hydrocarbons
Polynuclear Hydrocarbons Polynuclear Hydrocarbons
Polynuclear Hydrocarbons Nilesh Thakare
 
Permanganometry, iodometry in analytical technique, P K MANI
Permanganometry, iodometry in analytical technique, P K MANIPermanganometry, iodometry in analytical technique, P K MANI
Permanganometry, iodometry in analytical technique, P K MANIP.K. Mani
 
Iodimetry & iodometry
Iodimetry & iodometryIodimetry & iodometry
Iodimetry & iodometryRenjithaJR1
 
Organic Chemistry Name Reaction with mechanisms 140
Organic Chemistry Name Reaction with mechanisms 140Organic Chemistry Name Reaction with mechanisms 140
Organic Chemistry Name Reaction with mechanisms 140TusharRanjanNath
 
Oxyacids of sulphur
Oxyacids of sulphurOxyacids of sulphur
Oxyacids of sulphurRabia Aziz
 

Was ist angesagt? (20)

Dakin rearrangemnt
Dakin rearrangemntDakin rearrangemnt
Dakin rearrangemnt
 
Organophosphorous compounds
Organophosphorous compoundsOrganophosphorous compounds
Organophosphorous compounds
 
Preparation of p-bromoaniline from Acetanilide
Preparation of p-bromoaniline from AcetanilidePreparation of p-bromoaniline from Acetanilide
Preparation of p-bromoaniline from Acetanilide
 
Pinacol pinacolone rearrangement
Pinacol pinacolone rearrangementPinacol pinacolone rearrangement
Pinacol pinacolone rearrangement
 
Iodine value
Iodine valueIodine value
Iodine value
 
Heterocyclic chemistry
Heterocyclic chemistry Heterocyclic chemistry
Heterocyclic chemistry
 
Preparing alcohols
Preparing alcoholsPreparing alcohols
Preparing alcohols
 
Hydrogenation (3)
Hydrogenation (3)Hydrogenation (3)
Hydrogenation (3)
 
Preparation and standardization of various molar and normal solutions
Preparation and standardization of various molar and normal  solutionsPreparation and standardization of various molar and normal  solutions
Preparation and standardization of various molar and normal solutions
 
Pyridine - Syntheis, Reactions and Medicinal uses
Pyridine - Syntheis, Reactions and Medicinal usesPyridine - Syntheis, Reactions and Medicinal uses
Pyridine - Syntheis, Reactions and Medicinal uses
 
Stereoselective & stereospecific reaction B.Pharm
Stereoselective & stereospecific reaction B.Pharm Stereoselective & stereospecific reaction B.Pharm
Stereoselective & stereospecific reaction B.Pharm
 
Polynuclear Hydrocarbons
Polynuclear Hydrocarbons Polynuclear Hydrocarbons
Polynuclear Hydrocarbons
 
Methoxy group
Methoxy groupMethoxy group
Methoxy group
 
Permanganometry, iodometry in analytical technique, P K MANI
Permanganometry, iodometry in analytical technique, P K MANIPermanganometry, iodometry in analytical technique, P K MANI
Permanganometry, iodometry in analytical technique, P K MANI
 
FATS AND OILS UNIT-3.pptx
FATS AND OILS UNIT-3.pptxFATS AND OILS UNIT-3.pptx
FATS AND OILS UNIT-3.pptx
 
Iodimetry & iodometry
Iodimetry & iodometryIodimetry & iodometry
Iodimetry & iodometry
 
HYDROGEN PEROXIDE
HYDROGEN PEROXIDEHYDROGEN PEROXIDE
HYDROGEN PEROXIDE
 
Acid value
Acid valueAcid value
Acid value
 
Organic Chemistry Name Reaction with mechanisms 140
Organic Chemistry Name Reaction with mechanisms 140Organic Chemistry Name Reaction with mechanisms 140
Organic Chemistry Name Reaction with mechanisms 140
 
Oxyacids of sulphur
Oxyacids of sulphurOxyacids of sulphur
Oxyacids of sulphur
 

Ähnlich wie “Reduction of an Aldehyde or Ketone”

Synthesis of Iodo Ester Azide
Synthesis of Iodo Ester AzideSynthesis of Iodo Ester Azide
Synthesis of Iodo Ester Azideweston manter
 
example.docxExampleQualitative Analysis GoalsUtilize p.docx
example.docxExampleQualitative Analysis GoalsUtilize p.docxexample.docxExampleQualitative Analysis GoalsUtilize p.docx
example.docxExampleQualitative Analysis GoalsUtilize p.docxSANSKAR20
 
Water_Determination_by_Karl_Fischer_Titr.pdf
Water_Determination_by_Karl_Fischer_Titr.pdfWater_Determination_by_Karl_Fischer_Titr.pdf
Water_Determination_by_Karl_Fischer_Titr.pdfMunazzaSohail2
 
Detection Fatty Acid In Khng Khao( Peneus Merguiiensis
Detection  Fatty Acid In Khng Khao(  Peneus MerguiiensisDetection  Fatty Acid In Khng Khao(  Peneus Merguiiensis
Detection Fatty Acid In Khng Khao( Peneus MerguiiensisPhisitasak Wisatsukun
 
Antti Vuori ANPSG2001 .pdf
Antti Vuori ANPSG2001 .pdfAntti Vuori ANPSG2001 .pdf
Antti Vuori ANPSG2001 .pdfssuserae3155
 
14 titration of h2 o2
14 titration of h2 o214 titration of h2 o2
14 titration of h2 o2Student
 
A New Method for the Analysis of ppb
A New Method for the Analysis of ppb A New Method for the Analysis of ppb
A New Method for the Analysis of ppb Jennifer Maclachlan
 
Pyrogen testing 112070804005
Pyrogen testing  112070804005Pyrogen testing  112070804005
Pyrogen testing 112070804005Patel Parth
 
Lab at Mahidol
Lab at MahidolLab at Mahidol
Lab at MahidolDan Betts
 
CHE235L4Spring2017.pdfFW (gmol)mp (oC.docx
CHE235L4Spring2017.pdfFW (gmol)mp (oC.docxCHE235L4Spring2017.pdfFW (gmol)mp (oC.docx
CHE235L4Spring2017.pdfFW (gmol)mp (oC.docxchristinemaritza
 
Mahidol Intership Powerpoint
Mahidol Intership PowerpointMahidol Intership Powerpoint
Mahidol Intership Powerpointjomovie
 
Slide share of atropine
Slide share of atropineSlide share of atropine
Slide share of atropineMushtaqKhan84
 
Advanced oxidation of phenolic compounds
Advanced oxidation of phenolic compoundsAdvanced oxidation of phenolic compounds
Advanced oxidation of phenolic compoundsRaafat Alnaizy, PhD
 
14181_FORMALDEHYDE_SEPT_03_.PPT
14181_FORMALDEHYDE_SEPT_03_.PPT14181_FORMALDEHYDE_SEPT_03_.PPT
14181_FORMALDEHYDE_SEPT_03_.PPTzahidur rahman
 

Ähnlich wie “Reduction of an Aldehyde or Ketone” (20)

RamaleyPosterFinal_KRA
RamaleyPosterFinal_KRARamaleyPosterFinal_KRA
RamaleyPosterFinal_KRA
 
Orgo II synthesis Lab
Orgo II synthesis LabOrgo II synthesis Lab
Orgo II synthesis Lab
 
Synthesis of Iodo Ester Azide
Synthesis of Iodo Ester AzideSynthesis of Iodo Ester Azide
Synthesis of Iodo Ester Azide
 
example.docxExampleQualitative Analysis GoalsUtilize p.docx
example.docxExampleQualitative Analysis GoalsUtilize p.docxexample.docxExampleQualitative Analysis GoalsUtilize p.docx
example.docxExampleQualitative Analysis GoalsUtilize p.docx
 
Water_Determination_by_Karl_Fischer_Titr.pdf
Water_Determination_by_Karl_Fischer_Titr.pdfWater_Determination_by_Karl_Fischer_Titr.pdf
Water_Determination_by_Karl_Fischer_Titr.pdf
 
Detection Fatty Acid In Khng Khao( Peneus Merguiiensis
Detection  Fatty Acid In Khng Khao(  Peneus MerguiiensisDetection  Fatty Acid In Khng Khao(  Peneus Merguiiensis
Detection Fatty Acid In Khng Khao( Peneus Merguiiensis
 
Antti Vuori ANPSG2001 .pdf
Antti Vuori ANPSG2001 .pdfAntti Vuori ANPSG2001 .pdf
Antti Vuori ANPSG2001 .pdf
 
14 titration of h2 o2
14 titration of h2 o214 titration of h2 o2
14 titration of h2 o2
 
A New Method for the Analysis of ppb
A New Method for the Analysis of ppb A New Method for the Analysis of ppb
A New Method for the Analysis of ppb
 
Pyrogen testing 112070804005
Pyrogen testing  112070804005Pyrogen testing  112070804005
Pyrogen testing 112070804005
 
Lab at Mahidol
Lab at MahidolLab at Mahidol
Lab at Mahidol
 
Final Report
Final ReportFinal Report
Final Report
 
Research paper
Research paperResearch paper
Research paper
 
CHE235L4Spring2017.pdfFW (gmol)mp (oC.docx
CHE235L4Spring2017.pdfFW (gmol)mp (oC.docxCHE235L4Spring2017.pdfFW (gmol)mp (oC.docx
CHE235L4Spring2017.pdfFW (gmol)mp (oC.docx
 
Mahidol Intership Powerpoint
Mahidol Intership PowerpointMahidol Intership Powerpoint
Mahidol Intership Powerpoint
 
Venkatesh
VenkateshVenkatesh
Venkatesh
 
Slide share of atropine
Slide share of atropineSlide share of atropine
Slide share of atropine
 
Mercury_JECE
Mercury_JECEMercury_JECE
Mercury_JECE
 
Advanced oxidation of phenolic compounds
Advanced oxidation of phenolic compoundsAdvanced oxidation of phenolic compounds
Advanced oxidation of phenolic compounds
 
14181_FORMALDEHYDE_SEPT_03_.PPT
14181_FORMALDEHYDE_SEPT_03_.PPT14181_FORMALDEHYDE_SEPT_03_.PPT
14181_FORMALDEHYDE_SEPT_03_.PPT
 

Mehr von Lindsay Meyer

Negotiating the Deal
Negotiating the DealNegotiating the Deal
Negotiating the DealLindsay Meyer
 
Dummy Cap Table & Returns Analysis - Round B
Dummy Cap Table & Returns Analysis - Round BDummy Cap Table & Returns Analysis - Round B
Dummy Cap Table & Returns Analysis - Round BLindsay Meyer
 
2013 HealthTech Conference Notes
2013 HealthTech Conference Notes2013 HealthTech Conference Notes
2013 HealthTech Conference NotesLindsay Meyer
 
Collision Forces: Scientific Integrity Meets the Capital Markets
Collision Forces: Scientific Integrity Meets the Capital MarketsCollision Forces: Scientific Integrity Meets the Capital Markets
Collision Forces: Scientific Integrity Meets the Capital MarketsLindsay Meyer
 
The Status of the Regulatory and Economic Landscape for Innovation in Big Pha...
The Status of the Regulatory and Economic Landscape for Innovation in Big Pha...The Status of the Regulatory and Economic Landscape for Innovation in Big Pha...
The Status of the Regulatory and Economic Landscape for Innovation in Big Pha...Lindsay Meyer
 
Three-dimensional Ultrasound: Techniques and Applications in Obstetrics
Three-dimensional Ultrasound: Techniques and Applications in ObstetricsThree-dimensional Ultrasound: Techniques and Applications in Obstetrics
Three-dimensional Ultrasound: Techniques and Applications in ObstetricsLindsay Meyer
 
The Science of What's In the Bottle: Factors Which Influence pH of White Wine
The Science of What's In the Bottle: Factors Which Influence pH of White WineThe Science of What's In the Bottle: Factors Which Influence pH of White Wine
The Science of What's In the Bottle: Factors Which Influence pH of White WineLindsay Meyer
 
The Science of What’s in the Bottle: Factors Which Influence pH of White Wine
The Science of What’s in the Bottle: Factors Which Influence pH of White WineThe Science of What’s in the Bottle: Factors Which Influence pH of White Wine
The Science of What’s in the Bottle: Factors Which Influence pH of White WineLindsay Meyer
 
$ANF Valuation Model
$ANF Valuation Model$ANF Valuation Model
$ANF Valuation ModelLindsay Meyer
 
Death prompts a review of gene therapy vector
Death prompts a review of gene therapy vectorDeath prompts a review of gene therapy vector
Death prompts a review of gene therapy vectorLindsay Meyer
 
Prenatal exposure to isotretinoin
Prenatal exposure to isotretinoinPrenatal exposure to isotretinoin
Prenatal exposure to isotretinoinLindsay Meyer
 
Rock Health Demo Day June 2012
Rock Health Demo Day June 2012Rock Health Demo Day June 2012
Rock Health Demo Day June 2012Lindsay Meyer
 
Rock Health Demo Day Notes
Rock Health Demo Day NotesRock Health Demo Day Notes
Rock Health Demo Day NotesLindsay Meyer
 
BoxWorks SuperSession: “The Future of Healthcare and the Cloud”
BoxWorks SuperSession: “The Future of Healthcare and the Cloud”BoxWorks SuperSession: “The Future of Healthcare and the Cloud”
BoxWorks SuperSession: “The Future of Healthcare and the Cloud”Lindsay Meyer
 
May 2013 EHR Market Share
May 2013 EHR Market ShareMay 2013 EHR Market Share
May 2013 EHR Market ShareLindsay Meyer
 
Predictive Analytics in Venture Investing
Predictive Analytics in Venture InvestingPredictive Analytics in Venture Investing
Predictive Analytics in Venture InvestingLindsay Meyer
 

Mehr von Lindsay Meyer (18)

Negotiating the Deal
Negotiating the DealNegotiating the Deal
Negotiating the Deal
 
Dummy Cap Table & Returns Analysis - Round B
Dummy Cap Table & Returns Analysis - Round BDummy Cap Table & Returns Analysis - Round B
Dummy Cap Table & Returns Analysis - Round B
 
2013 HealthTech Conference Notes
2013 HealthTech Conference Notes2013 HealthTech Conference Notes
2013 HealthTech Conference Notes
 
The #1 Ball in Golf
The #1 Ball in GolfThe #1 Ball in Golf
The #1 Ball in Golf
 
Collision Forces: Scientific Integrity Meets the Capital Markets
Collision Forces: Scientific Integrity Meets the Capital MarketsCollision Forces: Scientific Integrity Meets the Capital Markets
Collision Forces: Scientific Integrity Meets the Capital Markets
 
The Status of the Regulatory and Economic Landscape for Innovation in Big Pha...
The Status of the Regulatory and Economic Landscape for Innovation in Big Pha...The Status of the Regulatory and Economic Landscape for Innovation in Big Pha...
The Status of the Regulatory and Economic Landscape for Innovation in Big Pha...
 
Three-dimensional Ultrasound: Techniques and Applications in Obstetrics
Three-dimensional Ultrasound: Techniques and Applications in ObstetricsThree-dimensional Ultrasound: Techniques and Applications in Obstetrics
Three-dimensional Ultrasound: Techniques and Applications in Obstetrics
 
The Science of What's In the Bottle: Factors Which Influence pH of White Wine
The Science of What's In the Bottle: Factors Which Influence pH of White WineThe Science of What's In the Bottle: Factors Which Influence pH of White Wine
The Science of What's In the Bottle: Factors Which Influence pH of White Wine
 
The Science of What’s in the Bottle: Factors Which Influence pH of White Wine
The Science of What’s in the Bottle: Factors Which Influence pH of White WineThe Science of What’s in the Bottle: Factors Which Influence pH of White Wine
The Science of What’s in the Bottle: Factors Which Influence pH of White Wine
 
$ANF Tear Sheet
$ANF Tear Sheet$ANF Tear Sheet
$ANF Tear Sheet
 
$ANF Valuation Model
$ANF Valuation Model$ANF Valuation Model
$ANF Valuation Model
 
Death prompts a review of gene therapy vector
Death prompts a review of gene therapy vectorDeath prompts a review of gene therapy vector
Death prompts a review of gene therapy vector
 
Prenatal exposure to isotretinoin
Prenatal exposure to isotretinoinPrenatal exposure to isotretinoin
Prenatal exposure to isotretinoin
 
Rock Health Demo Day June 2012
Rock Health Demo Day June 2012Rock Health Demo Day June 2012
Rock Health Demo Day June 2012
 
Rock Health Demo Day Notes
Rock Health Demo Day NotesRock Health Demo Day Notes
Rock Health Demo Day Notes
 
BoxWorks SuperSession: “The Future of Healthcare and the Cloud”
BoxWorks SuperSession: “The Future of Healthcare and the Cloud”BoxWorks SuperSession: “The Future of Healthcare and the Cloud”
BoxWorks SuperSession: “The Future of Healthcare and the Cloud”
 
May 2013 EHR Market Share
May 2013 EHR Market ShareMay 2013 EHR Market Share
May 2013 EHR Market Share
 
Predictive Analytics in Venture Investing
Predictive Analytics in Venture InvestingPredictive Analytics in Venture Investing
Predictive Analytics in Venture Investing
 

“Reduction of an Aldehyde or Ketone”

  • 1. Lindsay Meyer Chris Devigny Laboratory Report, Final – 8 March 2006 University of Notre Dame CHEM 21224 Spring 2006 Title of Experiment: “Reduction of an Aldehyde or Ketone” Purpose: The purpose of completing this laboratory experiment was to devise a method for reducing an aldehyde or ketone based on: a substrate, reagent(s), and reaction mechanisms. Equation: Procedure: Reagents were obtained: 9-fluorenone = 1.034g; sodium borohydride = 0.543g. An initial TLC was taken for the purposes of determining reaction progress. Ether was chosen as the solvent and added in the amount of roughly 10mL. The reaction was performed in an Erlenmeyer, which was kept cool on ice. The mixture was mechanically stirred on high for 45 mins, with the progress being monitored every 10-15 mins. While it is likely that the reaction did not go to completion as the “dots” never converged to signal the formation of 9-fluorenol, the progress was notable. Due to time constraints, the reaction was halted. Weak hydrochloric acid (3.0M) was added to the mixture to decompose the excess sodium borohydride. Water, in an equivalent amount was also added to extract the organic product. The aqueous layer was removed and the ether layer was Roto-vapped to collect the crude product, 9-fluorenol, which had a distinct yellow color. An initial melting point was experimentally determined to be: 70- 72°C. Recrystallization was not performed since it would have been irrelevant and futile in producing a product with an enhanced –OH character. Observations/Data/Interpretations: Mass 9-fluorenone = 1.034g Mass sodium borohydride = 0.534g MP1 = 70-72°C Color = bright yellow IR = see attached; showed a broad, but weak peak at 3209, in the –OH region. Another peak occured at 1715, in the carbonyl region. The rest of the IR showed the aromatic stretch. -- Stoichiometric Calculations Number of moles start = 1.0g C13H8O * 1 mol C13H8O / 180g C13H8O = 0.0056mol C13H8O
  • 2. Theoretical Yield = 0.0056mol C13H8O * (4mol C13H10O / 1mol C13H8O) * (178g C13H10O / 1 mol C13H10O) = 3.95g C13H10O Moles NaBH4 start = 0.0056mol C13H8O * 1mol NaBH4 / 4mol C13H8O) = 0.014mol NaBH4 Grams NaBH4 start = 0.014mol NaBH4 * 37.84g NaBH4 / 1mol NaBH4 = 0.5298g NaBH4 -- The melting point of the product, what was to be 9-fluorenol, was lower than the expected value for the reagent, 9-fluorenone. A critical appraisal of the experimental techniques showed that the correct quantities of reagents were used (see stoichiometric calculations above). The disparity was likely introduced in the sodium borohydride, a reagent that quickly decomposes in air. Taking reagent from a weigh boat near the balance was a poor idea, because it had probably been saturated and rendered useless, in terms of reactivity. This explains the melting point of the “product” – a figure that was less than the expected melting point of the starting material. Impurities were introduced which ultimately lowered the melting point. The “peak” we see in the –OH region, could possibly be due to residual water in the product. The sodium borohydride was mostly to blame in this experiment in terms of error. In the future, recalling this unfruitful experience, will serve as a helpful reminder to take care in controlling reagents, especially those that decompose. However, the process that was used to reduce the ketone to an alcohol was in principle correct. The methodology was sound, a good solvent was chosen, and the measurements were correct. The final “product” – as it was obtained from Roto-vapping off the ether solvent, was likely mostly reagent 9-fluorenone, based on the melting points and an IR of functional groups. The carbonyl peak was very distinct and large, whereas the alcohol peak was not distinct, and may have been due to water. The unknown factor in this experiment was the extent to which sodium borohydride decomposed. It seems that nearly all of it was useless, based on the amount of –OH character seen in the IR spectrum. Repeating this experiment under much tighter controls would prevent any future problems regarding reagent reactivity. With the developed procedure, future attempts would most likely produce 9-fluorenol, the alcohol, in much higher yields. This could be determined again, with an IR, and taking a melting point. The theoretical melting point for 9-fluorenol is 152-158°C and we would expect the melting point to be slightly under that value (to account for unavoidable impurities introduced experimentally). Recrystallization would also be utilized, to help purify the product further. In this trial, recrystallization was not attempted as it would not have been useful. The –OH character was so weak, that perhaps recrystallization would have introduced additional impurities that would have degraded the alcoholic nature of the product. Although this is debatable, it is certainly a delicate balance and again – very unnecessary since there wasn’t a lot of physical 9-fluorenol product to purify. Essentially, the entire procedure was one extended purification of 9-fluorenone, and recrystallization would not have rendered any more alcohol product, from the predominating ketone.