Dense Phase Pressure Conveying Systems are particularly suitable for systems, which convey materials at high capacities over long distances, to multiple destinations.

1. http://www.khodiyarinfratech.com/dense-phase-system.html
Dense phase system manufacturer India, Bucket Elevator, SS Storage silo, ahmedabad, Gujarat
Khodiyar Infratech - Manufacturer and exporter of Dense phase system, Bucket Elevator, SS Storage silo,
Dust suppression system, Cement storage silo, Jumbo bag unloading system, Fly ash storage silo, dust
collector, ahmedabad, Gujarat, India. http://www.khodiyarinfratech.com/dense-phase-system.html
Dense Phase System Manufacturing India
Dense Phase Pressure Conveying Systems generally use compressed air at above 1 Bar g to push
materials from a Pressure Vessel (also known as a sender unit or pressure pot) through a pipeline to
the destination where the air and product are separated by a filter or other system. The product
extrudes through the pipeline, initially at low velocity, and gradually accelerating towards the
destination.
o Systems generally operate on a batch basis as follows: (simplified) <<
o Fill the sender unit with product to be conveyed.
o Pressurize with compressed air
o Open discharge valve until the product has been conveyed out.
o Close discharge valve and refill vessel.
A panel of valves and sensors are used to control the air pressures and velocities at all parts of the
system to ensure smooth reliable conveying of the product.
Applications ::
Dense Phase Pressure Conveying Systems are particularly suitable for systems, which convey materials
at high capacities over long distances, to multiple destinations. Most systems include several air control
valves and the high pressure compressed air supply is able to overcome the pressure drop generated
by the most difficult materials, while also providing controlled conveying for friable materials. The
lower convey velocities also extend the service life for systems conveying abrasive materials.
Convey Rates : High, up to 100 tonnes/hr or higher
Convey Velocities: Low, 1-10 m/s
Convey Distances: High, up to 500m or longer
Air Mover : Compressor (Screw, rotary, reciprocating)
Operating Pressure: Up to 8 Bar g
Material/Air Ratios:
high, up to 150 kg/kg
Note All values approximate, refer Nu-Con for advice about how to convey your product.
Options ::
To optimise the system various techniques are used to reduce compressed air consumption and cost,
and additional options for specialised applications are available:

2. Air injectors to fluidise materials to reduce friction
Pulsed air injection to break up the product flow into discrete slugs
Line Boosters to assist conveying along convey route
Vibration to loosen cohesive powders prior to conveying
Twin vessels to provide continuous conveying
In-Line sifting, sampling, delumping, metal detection and magnetic separation systems
Stepped convey lines to reduce terminal velocities, abrasion and degradation
Stainless Steel construction for sanitation or corrosion resistance
Demountable and polished designs to USDA 3A standards for ease of cleaning.
For more details please visit our website: http://www.khodiyarinfratech.com/dense-phase-system.html