2. Trans Tech Online Journals and Book Series
www.ttp.net and www.scientific.net are among the largest and fastest growing (over 300.000
new pages added in 2013) websites devoted entirely to the area of Materials Science and
Engineering related topics.
The sites feature the following online periodicals:
Materials Science Forum (32 vols./y)
Key Engineering Materials (30 vols./y)
Solid State Phenomena (12 vols./y)
Defect and Diffusion Forum (8 vols./y)
Diffusion Foundations (4 vols./y)
Journal of Nano Research (4 vols./y)
Advanced Materials Research (100+ vols./y)
Applied Mechanics and Materials (80+ vols./y)
Journal of Biomimetics, Biomaterials, and Tissue Engineering (4 vols./y)
Journal of Engineering Research in Africa (2 vols./y)
Advanced Engineering Forum (2-4 vols./y)
Nano Hybrids (4 vols./y)
Advances in Science and Technology (8-10 vols. every 2 y)
Trans Tech Book Series: Materials Science Foundations (2-4 vols./y)
Call for Guest Editors
We are always interested in suggestions for special topic volumes to be published in our periodicals “Materials
Science Forum”, “Key Engineering Materials”, “Solid State Phenomena” and “Defect and Diffusion Forum”.
To discuss further details, please contact Thomas Wohlbier, Editorial Director TTP, email: t.wohlbier@ttp.net
We are looking forward to hearing from you.
All titles now also available on CD and eBook, for details visit www.ttp.net
catalog-2013_bearbeitet.indd 2 16.09.2013 10:07:35
3. Materials Science & Engineering 2014
Adaptive, Active and Multifunctional Smart
Materials Systems
Eds. Pietro Vincenzini et al.
Advances in Science and Technology Vol. 77
The 55 peer-reviewed papers collected here together offer a plenitude
of up-to-date information on “Adaptive, Active and Multifunctional Smart
Materials Systems”. The papers are conveniently arranged into: Chapter
1: Smart Inorganic Materials Systems, Chapter 2: Stimuli Responsive
Polymers and Gels, Chapter 3: Luminescent and Chromogenic
Materials Systems, Chapter 4: Multifunctional Composites and Porous
Materials Systems, Chapter 5: Non-Volatile Memory Devices, Chapter
6: Multiferroics, Chapter 7: Metamaterials, Chapter 8: Graphene,
Chapter 9: Multifunctional Materials for Energy Harvesting, Chapter
10: Actively Moving Polymers.
Available in print (978-3-908158-63-9), 382 pages, 2013,
US$166.00/€120.00 also available on CD (978-3-908158-74-5) and
eBook (978-3-908158-85-1)
Advanced Building Materials and Structural
Engineering
Eds. B. Xu and H.Y. Li
Advanced Materials Research Vol. 461
These 188 papers, presented at the 2012 International
Conference on Building Materials and Structural Engineering
(BMSE2012), are divided into chapters devoted to:
1:Advanced Materials Engineering and Dynamic Systems,
2:Building Materials, Mechanical Engineering and the
Environment, 3:Materials Processing Technology and Mining
Engineering, 4:New Materials, Applications and Processes,
5:Biotechnology, Chemical and Materials Engineering and
6:Materials Science, Mechanics and its Application.
Available in print (978-3-03785-360-3), 890 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-183-5) and
eBook (978-3-03813-797-9)
Advanced Building Materials and Sustainable
Architecture
Eds. Yongbo Shao et al.
Applied Mechanics and Materials Vols. 174-177
The present volumes comprise papers which will provide comprehensive
information on the topics of Traditional Building Materials; Advanced
Building Materials; Architectural Design, Architectural Art and its
Theory; Building Technology and Science; Urban Planning and Design;
Landscape Planning and Design; Construction Project Management;
Architectural Environment and Equipment Engineering; Ecological
Architecture; Engineering Management and Engineering Education;
Monitoring and Control of Quality Engineering; Sustainable City and
Regional Development. The work’s up-to-date and state-of-the art
coverage of the worldwide state of these fields make it an invaluable
resource.
Available in print (978-3-03785-423-5), 3914 pages, 2012,
US$552.00/€400.00 also available on CD (978-3-03795-243-6) and
eBook (978-3-03813-837-2)
Advanced Composite Materials
Eds. Wenzhe Chen et al.
Advanced Materials Research Vols. 482-484
This extensive collection of papers constitutes an invaluable source
of information covering the current state of the art with regard to
manufacturing science and engineering, and focussing on Advanced
Composite Materials. These 534 peer-reviewed papers are
grouped into 12 chapters: CAD/CAM; Ceramic-Matrix Composites;
Coatings, Damage Mechanics; Design of Materials and Components,
Environmental Effects; Metal-Matrix Composites; Modelling; Non-
Destructive Evaluation; Polymer-Matrix Composites; Processing and
Manufacturing, Properties and Performance; Prototyping Reinforcement
Materials, Repair, Testing; Thermoplastic Composites; Nanotechnology.
Available in print (978-3-03785-373-3), 2790 pages, 2012,
US$552.00/€400.00 also available on CD (978-3-03795-196-5) and
eBook (978-3-03813-806-8)
Advanced Composite Materials and
Manufacturing Engineering
Eds. B. Xu and H.Y. Li
Advanced Materials Research Vol. 583
The proceedings of the International Conference on Advanced
Composite Materials and Manufacturing Engineering (CMME2012),
held on the 13 and 14th October 2012 in Beijing, China, comprise 94
peer-reviewed papers grouped into: Advanced Composite Materials
and Composite Properties of Materials; Materials and Mechanics
Studies in Manufacturing Engineering; Materials Engineering and
Materials Application Engineering.
Available in print (978-3-03785-522-5), 430 pages, 2012,
US$207.00/€150.00 also available on CD (978-3-03795-328-0) and
eBook (978-3-03813-448-0)
Advanced Computational Engineering and
Experimenting II
Eds. Andreas Öchsner and Holm Altenbach
Key Engineering Materials Vol. 553
This special issue of Key Engineering Materials contains selected
refereed papers presented at the Sixth International Conference on
Advanced Computational Engineering and Experimenting (ACE-X
2012) held at Kalyon Hotel (Istanbul), Turkey during the period 1st-
4th July, 2012.
Available in print (978-3-03785-682-6), 150 pages, 2013,
US$124.00/€90.00 also available on CD (978-3-03795-447-8) and
eBook (978-3-03826-063-9)
Advanced Design and Manufacturing Technology II
Eds. Dunwen Zuo, Hun Guo et al.
Advanced Materials Research Vol. 670
Special topic volume with invited peer reviewed papers covers
engineering materials, manufacture and production, automation and
control, environment-friendly design and manufacture, web/internet
technologies, artificial intelligence and smart computing in design and
manufacture, enterprise, management, and other related topics and so
on. This work will be invaluable to production and research engineers,
and also to research students and academics interested in the field.
Turkey during the period 1st-4th July, 2012.
Available in print (978-3-03785-638-3), 248 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-414-0) and
eBook (978-3-03826-020-2)
Advanced in Nanoscience and Technology
Ed. Hailin Cong
Advanced Materials Research Vol. 465
The proceedings of the International Conference on Advanced
Composite Materials and Manufacturing Engineering (CMME2012),
held on the 13 and 14th October 2012 in Beijing, China, comprise 94
peer-reviewed papers grouped into: Advanced Composite Materials and
Composite Properties of Materials; Materials and Mechanics Studies
in Manufacturing Engineering; Materials Engineering and Materials
Application Engineering.
Available in print (978-3-03785-367-2), 324 pages, 2012,
US$207.00/€150.00 also available on CD (978-3-03795-190-3) and
eBook (978-3-03813-800-6)
For full table of contents and descriptions of each title visit our web site at: www.ttp.net 3
catalog-2013_bearbeitet.indd 3 16.09.2013 10:07:35
4. Materials Science & Engineering 2014 Advanced Manufacturing Technologies and
Material Properties
Eds. Dunwen Zuo, Hun Guo, Ji Xu et al.
Advanced Materials Research Vol. 764
The present volume comprises a collection of peer-reviewed papers
covering engineering & technology, material science and technology
in manufacturing including artificial material, forming, novel material
fabrication, green manufacturing and other related topics. This work
will be invaluable to production and research engineers, and also to
research students and academics interested in the field.
Available in print (978-3-03785-769-4), 216 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-504-8) and
eBook (978-3-03826-150-6)
Advanced Manufacturing Technology and
Cutting Tools
Eds. Alan K.T. Lau
Advanced Materials Research Vol. 381
China is the world’s largest market for machine- and cutting-tools, so
advanced manufacturing technology and cutting tools can be expected
to enjoy not only a good market share but also huge opportunities
for development and advancement. The present volume contains 28
peer-reviewed papers selected from among the 60 (from academia
and industry) presented at the seminar on Advanced Manufacturing
Technology and Cutting Tools (SAMTCT2011) which was held during the
20-22th August 2011 in Shanghai (China). This work presents readers
with a broad overview of recent advances in the fields of manufacturing
technology and cutting tools.
Available in print (978-3-03785-314-6), 100 pages, 2012,
US$97.00/€70.00 also available on CD (978-3-03795-139-2) and
eBook (978-3-03813-770-2)
Advanced Materials
Eds. Jinglong Bu et al.
Advanced Materials Research Vols. 415-417
These volumes comprise papers, on the topic of “Advanced Materials”,
selected from the second International Conference on Advances in
Materials and Manufacturing (ICAMMP 2011) held on the 16-18th
December 2011 in Guilin, China. The 468 peer-reviewed papers are
grouped into the chapters: 1: Composites, 2: Micro / Nano Materials,
3: Iron and Steel, 4: Ceramic, 5: Metal Alloy Materials, 6: Biomaterials,
7: Optical/Electronic/Magnetic Materials, 8: Building Materials,
9: New Energy Materials and Environmental Materials,
10: Biomaterials and Chemical Materials, 11: Thin Films,
12: New Functional Materials, 13: Materials and Design.
Available in print (978-3-03785-325-2), 2520 pages, 2012,
US$414.00/€300.00 also available on CD (978-3-03795-149-1) and
eBook (978-3-03813-777-1)
Advanced Materials and Engineering Materials
Ed. Sally Gao
Advanced Materials Research Vols. 457-458
This conference provided a platform for the presentation of cutting-edge
work in the management of Advanced Materials and Engineering
Materials. The 292 papers are grouped into the chapters: 1:
Advanced Materials Science, 2: Engineering Research, 3: Materials
and Information Technology, 4: Materials Processing Technology,
5: Mechanical and Computer Control, 6: System Analysis and Industrial
Engineering, 7: Intelligent Mechatronics and 8: Signal Processing.
Available in print (978-3-03785-355-9), 1700 pages, 2012,
US$414.00/€300.00 also available on CD (978-3-03795-177-4) and
eBook (978-3-03813-794-8)
Advanced Materials and Nanotechnology
Eds. B. J. Ruck and T. Kemmitt
Materials Science Forum Vol. 700
The highly successful AMN conference series is the flagship of the
New Zealand MacDiarmid Institute; a virtual centre of research
excellence named after New Zealand’s 3rd Nobel Laureate, Professor
Alan MacDiarmid. The conference offers a broad interdisciplinary
overview of advanced materials and nanotechnology, and provides
an exciting forum within which to discuss new and exciting advances
in the field. The 55 peer-reviewed papers cover topics that are
related to nanotechnology, advanced materials, nanoelectronics,
superconductors, spintronics, nanoparticles, microfluidics, advanced
sensors, photovoltaics and nanobiology. The result is an excellent and
timely guide to these specialized topics.
Available in print (978-3-03785-263-7), 270 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-088-3) and
eBook (978-3-03813-665-1)
Advanced Materials and Processes II
Eds. Hongbing Ji et al.
Advanced Materials Research Vols. 557-559
These 507 peer-reviewed papers are grouped into the chapters:
Non-Ferrous Metal Materials; Iron and Steel; Composites; Micro/Nano
Materials; Optical/Electronic/Magnetic Materials; Building Materials
and Structural Mechanics; New Materials and their Application; Energy
Materials and Energy Storage Materials; Material Forming, Machining
and Joining; Material Preparation, Properties and Failure; Thin Films/
Surface Engineering/Coatings; Computer Application, Mathematical
Modeling and Analysis; Modeling, Simulation and Emulation; Product
Design, Manufacturing and Maintenance. This compilation offers
invaluable insights into current thinking concerning materials usage.
Available in print (978-3-03785-457-0), 2462 pages, 2012,
US$414.00/€300.00 also available on CD (978-3-03795-274-0) and
eBook (978-3-03813-871-6)
Advanced Materials and Structures IV
Eds. Mircea Nicoară et al.
Solid State Phenomena Vol. 188
The present volume contains the papers presented at the international
conference on Advanced Materials and Structures – AMS 2011, held in
Timisoara, Romania, in 2011. The conference aimed to cover the broad
domain of advanced materials in all of its important aspects: technology
of fabrication, property characterization, advanced applications,
investigation and mathematical modelling.
Available in print (978-3-03785-391-7), 450 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-213-9) and
eBook (978-3-03813-880-8)
Advanced Materials Design and Mechanics
Ed. Jing Guo
Advanced Materials Research Vol. 569
These are the proceedings of the 2012 International Conference on
Advanced Materials Design and Mechanics (ICAMDM 2012) held on
June 5-7th 2012 in Xiamen, China. The 167 peer-reviewed papers
are grouped into 5 chapters: Advanced Materials Design; Materials
Engineering; Manufacturing, Technology and Processing; Mechanical
Engineering; Applied Computer Technologies and Control.
Available in print (978-3-03785-480-8), 840 pages, 2012, US$
207.00/€150.00 also available on CD (978-3-03795-293-1) and eBook
(978-3-03813-896-9)
4 All titles now also available on CD and eBook, for details visit www.ttp.net
catalog-2013_bearbeitet.indd 4 16.09.2013 10:07:35
5. Materials Science & Engineering 2014
Advanced Materials Forum VI
Eds. Ana Maria Pires Pinto et al.
Materials Science Forum Vols. 730-732
This special collection of peer-reviewed papers covers a wide
range of Materials Science and Engineering topics, and contains
up-to-date information on the challenges to materials, as well as
making a contribution to the improvement of materials performance,
characterization and environmental sustainability.
Available in print (978-3-03785-493-8), 1250 pages, 2012,
US$414.00/€300.00 also available on CD (978-3-03795-305-1) and
eBook (978-3-03813-651-4)
Advanced Materials in Machine Design
Eds. A. Muc, M. Barski et al.
Key Engineering Materials Vol. 542
This book is a collection of papers concerning the application of
advanced materials in machine design. Depending on the scale at
which they are analyzed and used, we can talk about composites,
nano-composites, nano-materials and intelligent materials, e.g. such as
piezoelectric materials, magneto-restrictive materials, functional (Shape
Memory Alloys) materials. The efficient and effective use of materials in
design applications is directly connected with the good knowledge of the
static and fatigue strengths of the material. The detection and control of
damages and the study of their effects on the mechanical behavior of
materials (especially composite structures) become important practical
issues. Materials with multifield coupling properties are an important
aspect of modern science and technology with applications in many
industrial fields. The book is intended for researchers, engineers,
designers and students interested in advanced materials and their use
in the machine design and mechanical engineering.
Available in print (978-3-03785-586-7), 232 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-375-4) and
eBook (978-3-03813-967-6)
Advanced Materials in Microwaves and Optics
Ed. David Wang
Key Engineering Materials Vol. 500
The goal of this collection of peer-reviewed papers is to bring together
researchers from academia and industry, as well as practitioners, so
as to share ideas, problems and solutions related to the multifaceted
aspects of Advanced Materials in Microwaves and Optics.
Available in print (978-3-03785-273-6), 880 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-098-2) and
eBook (978-3-03813-681-1)
Advanced Materials Research II
Ed. Wu Fan
Advanced Materials Research Vols. 463-464
The objective of ICAMR 2012 was to provide a forum for the discussion
of new developments, recent progress and innovations in the field of
Materials Science. The papers are divided into twenty-two sections,
covering such topics as materials behaviour, casting and solidification,
coatings and surface engineering, composites, machining technology,
nanomaterials, biomedical manufacturing, sustainable manufacturing
processes, manufacturing planning and scheduling, modelling and
simulation, computer-aided design and engineering, semiconductor
materials engineering, laser-based manufacturing and mechanical and
electronic engineering control.
Available in print (978-3-03785-363-4), 1800 pages, 2012,
US$414.00/€300.00 also available on CD (978-3-03795-186-6) and
eBook (978-3-03813-799-3)
Advanced Materials Science and Technology
Eds. Shijie Zhu, Baorong Ni et al.
Materials Science Forum Vol. 750
The 8th International Forum on Advanced Materials Science and
Technology (IFAMST-8), was held in Fukuoka Institute of Technology,
Fukuoka City, Japan, August 1-4, 2012. The forum attracted about
200 attendees from 10 different countries. The proceedings include 79
peer reviewed papers covering a wide range of up-to-date materials
science topics.
Available in print (978-3-03785-660-4), 358 pages, 2013,
US$166.00/€120.00 also available on CD (978-3-03795-385-3) and
eBook (978-3-03826-041-7)
Advanced Materials XII
Eds. Shaheed Khan et al.
Key Engineering Materials Vols. 510-511
Advanced Materials XII is a compilation of selected peer-reviewed
papers. The ever-increasing changes and complexities that characterize
the present-day needs of industry have driven a growing demand for
technical information on advanced materials. The ultimate aim of this
publication is to present the latest information on recent progress,
achievements and innovations in the field of advanced materials
research and technology. The technical data presented here is likely to
aid scientists and researchers working in the field of advanced materials.
Available in print (978-3-03785-411-2), 650 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-226-9) and
eBook (978-3-03813-881-5)
Advanced Micro-Device Engineering III
Ed. Sumio Hosaka
Key Engineering Materials Vol. 534
The aim of this volume is to accelerate the exchange of information
on the best practices for CAD, CAM, Manufacturing, Mechanical
Engineering, Modeling and Simulation, etc. Engineers and scientists in
academia, industry and government here address the most innovative
research and development work, including technical challenges and
social and economic issues, and discuss their ideas, results, work-in-progress
and experience concerning all aspects of Computer-Aided
Design, Manufacturing, Modeling and Simulation.
Available in print (978-3-03785-539-3), 274 pages, 2013,
US$166.00/€120.00 also available on CD (978-3-03795-335-8) and
eBook (978-3-03813-920-1)
Advanced Multifunctional Electroceramics
Eds. Sean Li, Thiam Teck Tan and Danyang Wang
Key Engineering Materials Vol. 547
As a relatively recent phenomenon, Electroceramics have had a
profound impact on the so called “electronics revolution”. Ceramic
materials that have been specially formulated for specific electrical,
electromagnetic and optical properties can be tailored for their use
as insulators, ferroelectric materials, highly conductive ceramics,
electrodes, MEMS, energy convertors, sensors and actuators, etc.
The quest to push performance boundaries through further study into
the fundamental aspects of electroceramics and their commercial
applications is essential for the advancement of this science and
technology. These works show the latest knowhow and new insights
to the development of electroceramics.
Available in print (978-3-03785-631-4), 224 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-388-4) and
eBook (978-3-03826-012-7)
For full table of contents and descriptions of each title visit our web site at: www.ttp.net 5
catalog-2013_bearbeitet.indd 5 16.09.2013 10:07:35
6. Materials Science & Engineering 2014 Advanced Polymer Processing III
Ed. Weimin Yang
Key Engineering Materials Vol. 561
The book aims to exchange and share a number of experts and
scholars’s experiences and research results about all aspects of
polymer processing and modification technology; modern mold
technology; rapid prototyping technology, automobiles, home
appliances, electronic and aviation materials processing; materials
processing simulation technology; molding equipment and process data
acquisition and monitoring and other areas of new concepts. The book
further enhance the interrelationships between realms of processing
equipment, molding technology, mold design, mold manufacture and
materials modification, to raise the application level for polymer and
composite material in technologies such as cash manufacturing.
Available in print (978-3-03785-721-2), 734 pages, 2013,
US$276.00/€200.00 also available on CD (978-3-03795-472-0) and
eBook (978-3-03826-102-5)
Advanced Powder Technology VIII
Eds. Lucio Salgado et al.
Materials Science Forum Vols. 727-728
This special collection of peer-reviewed papers focuses on the powder
technology of metals, ceramics and composites. The 343 papers
are grouped into 3 chapters: 1 - Powder Metallurgy; 2 - Ceramics I;
3 - Ceramics II. The topics covered range over powder production,
ceramics processing, properties, powder compaction and sintering,
injection moulding and mechanical alloying. A special session dealt
with nanomaterials, fuel cells, storage energy materials, biomaterials,
sintering atmospheres, PM markets, characterization and applications.
Available in print (978-3-03785-490-7), 2080 pages, 2012,
US$552.00/€400.00 also available on CD (978-3-03795-303-7) and
eBook (978-3-03813-906-5)
Advanced Structural and Functional Materials
for Protection
Eds. Ma Jan and Santhiagu Ezhilvalavan
Solid State Phenomena Vol. 185
This collection of 37 papers describe materials for protecting civilians
and soldiers against vehicle collision, blast-damage, fragmentation and
unconventional attack. They also treat multi-functional materials for
enhancing civilian and soldier performance under extreme conditions.
The detailed topics include the atomic-layer deposition of thin inorganic
coatings into renewable packaging materials, the development of
woven enhanced silk fabric for ballistic protection, novel piezo-electric
tactile sensor materials having improved properties, enhancement of
the char resistance of expandable graphite-based intrumescent fire-retardant
coatings by using multi-wall carbon nano tubes for structural
steel, the development of new sol-gel surface-treatment formulations
for the bonded repair of aircraft and the laminated microstructure and
toughening mechanism of abalone shell.
Available in print (978-3-03785-365-8), 150 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-188-0) and
eBook (978-3-03813-698-9)
Advanced X-Ray Characterization Techniques
Eds. Zainal Arifin Ahmad et al.
Advanced Materials Research Vol. 620
X-ray applications and techniques are gaining importance and are
moving to the forefront of science. A powerful tool with many advantages,
X-ray applications and techniques present a route for rapid, hassle-free,
non-destructive, safe and accurate analysis. This book contains
a compilation of papers, all related to X-ray techniques, which are
applied in various areas of science and technology, namely in research
and industry. This publication aims to showcase the current diversity
and versatility of X-ray related techniques. With contributors from all
around the world, this publication of compiled papers will relate a host
of X-ray related techniques with aims and the eventual findings, all of
which are presented in a short and concise manner. It is believed that
this book will be a good scientific literature which provides clear and
important information on X-ray related ventures.
Available in print (978-3-03785-560-7), 550 pages, 2013,
US$248.00/€180.00 also available on CD (978-3-03795-356-3) and
eBook (978-3-03813-941-6)
Advancement of Materials and Nanotechnology II
Ed. Norlida Kamarulzaman
Advanced Materials Research Vol. 545
The objective of this special collection is to provide a platform for the
presentation of the latest progress achieved by materials scientists
in divers fields: such as the latest techniques in materials synthesis,
characterization and fabrication - plus the functionalities of materials
and devices. The papers are grouped into: Nanomaterials and
Nanostructures; Electrochemical Materials; Biology, Medical and
Pharmaceutical Materials and Technology; Metals and Alloys; Electrical
and Electronic Materials; Polymeric Materials and Composites; Devices
(Including MEMS and NEMS); Catalytic Materials; Semiconducting and
Superconducting Materials; Other Materials.
Available in print (978-3-03785-449-5), 436 pages, 2012,
US$207.00/€150.00 also available on CD (978-3-03795-259-7) and
eBook (978-3-03813-863-1)
Advances in Abrasive Technology XV
Eds. Y.F. Zhang et al.
Advanced Materials Research Vol. 565
This book brings together the latest developments in, and applications of,
abrasive technology. The topics covered include: grinding and grinding
wheels, truing and dressing techniques for grinding wheels, finishing,
lapping, honing and polishing, abrasive-jet machining, advances in
machining technologies, micro/nano-fabrication, as well as other novel
technologies and advanced studies relevant to abrasive technology
and precision manufacturing. This work will represent an invaluable
reference source for professionals in the precision manufacturing
field who wish to keep abreast of state-of-the-art developments in
abrasive technology and who are interested in understanding further
the fundamentals of this discipline.
Available in print (978-3-03785-467-9), 690 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-281-8) and
eBook (978-3-03813-883-9)
Advances in Crack Growth Modeling
Eds. Ferri Aliabadi and Pihua Wen
Key Engineering Materials Vol. 560
Crack growth is a complex phenomenon and difficult to model without
assumed simplifications. In recent years, there has been an increasing
realization that advanced computational methods such as the Finite
Element Method, the Boundary Element Method and Mesh Free
Methods can be used to simulate crack growth in complex structural
parts. This special issue contains original papers written by active
researchers in the field of computational fracture mechanics. The aim is
to inform those in the fracture mechanics community who might not be
at the forefront of computational research of the recent developments
and techniques available and the wide range of applications for which
solutions are now possible.
Available in print (978-3-03785-735-9), 170 pages, 2013,
US$124.00/€90.00 also available on CD (978-3-03795-482-9) and
eBook (978-3-03826-116-2)
6 All titles now also available on CD and eBook, for details visit www.ttp.net
catalog-2013_bearbeitet.indd 6 16.09.2013 10:07:36
7. Materials Science & Engineering 2014
Advances in Engineering Materials, Product and
Systems Design
Ed. Aleksandar Subic
Advanced Materials Research Vol. 633
This book presents some recent research efforts that provide new
insights into particular advances in engineering materials, product and
systems design. The featured research contributions stemming from
an international virtual engineering forum aim to inform future research
and development in relevant fields. This includes especially research
focused on design, materials and manufacturing of engineering
structures, components and systems for industrial applications,
including aerospace, automotive, bioengineering and sports.
Available in print (978-3-03785-585-0), 350 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-374-7) and
eBook (978-3-03813-966-9)
Advances in Engineering Plasticity XI
Eds. Guoxing Lu and Qingming Zhang
Key Engineering Materials Vols. 535-536
This special issue of peer review papers covers all aspects of
Engineering Plasticity and Its Applications. The primary objective was
to gather the current knowledge of an international group of scientists,
researchers and engineers from academic to industrial institutions and
to exchange original ideas, discuss new developments and disseminate
the latest research findings in the field of engineering plasticity.
Available in print (978-3-03785-548-5), 600 pages, 2013,
US$345.00/€266.00 also available on CD (978-3-03795-320-4) and
eBook (978-3-03813-929-4)
Advances in Fracture and Damage Mechanics X
Eds. Z. Tonković and M.H. Aliabadi
Key Engineering Materials Vols. 488-489
This collection of peer-reviewed papers covers a wide range of topics:
Fracture Mechanics, Failure analysis, corrosion, Creep, Non-linear
problems, Dynamic Fracture, Residual Stress, Environmental effects,
Crack Propagation, Repair Techniques, Composites, Ceramics,
Polymers, Metallic and concrete materials, Probabilistic Aspects, Risk
Analysis, Damage Tolerance, Fracture Control, Computer Modelling
Methods (Finite Elements, Boundary Elements and Meshless),
Microstructural and Multiscale Aspects. The work thus offers a timely
survey of these subjects.
Available in print (978-3-03785-218-7), 865 pages, 2012,
US$414.00/€300.00 also available on CD (978-3-03795-043-2) and
eBook (978-3-03813-676-7)
Advances in Fracture and Damage Mechanics XI
Eds. Li Qingfen, Li Yulong et al.
Key Engineering Materials Vols. 525-526
This volume covers a wide range of topics: Fracture Mechanics, Failure
Analysis, Composites, Multiscale Modeling, Micromechanics, Structural
Health Monitoring, Damage Tolerance, Corrosion, Creep, Non-Linear
Problems, Dynamic Fracture, Residual Stress, Environmental Effects,
Crack Propagation, Metallic and Concrete Materials, Probabilistic
Aspects, Computer Modeling Methods (Finite Element, Boundary
Element and Meshless), Microstructural and Multiscale Aspects.
Available in print (978-3-03785-463-1), 650 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-275-7) and
eBook (978-3-03813-877-8)
Advances in Functional and Electronic Materials
Eds. Lianjun Wang, Xiumei Wang et al.
Materials Science Forum Vols. 745-746
The collection of peer reviewed papers C-MRS 2012 meeting includes
137 papers selected from Symposium G: Bio- materials, Symposium
H: Functional crystal materials, Symposium J: Multiferroics materials,
Symposium K: Supercomputer materials and application, Symposium
M: Nano and ultra-fine materials, Symposium N: Advanced ceramic
materials, and Symposium U: Amorphous alloy and high entropy
materials.
Available in print (978-3-03785-607-9), 876 pages, 2013,
US$276.00/€200.00 also available on CD (978-3-03795-390-7) and
eBook (978-3-03813-988-1)
Advances in Manufacturing Systems
Eds. M. Marcos et al.
Key Engineering Materials Vol. 502
This book describes the most recent Advances in Manufacturing
Systems presented at the 4th Manufacturing Engineering Society
International Conference (MESIC2011), which was held during
September 2011 in Cadiz, Spain. Flexible, Intelligent and Emergent
Manufacturing Systems, Quality, Quality Control and Quality
Management, Production Engineering and Planning are, together with
others, the topics which can be found herein. The book is therefore
essential reading matter for manufacturing engineers working in the
fields mentioned.
Available in print (978-3-03785-358-0), 170 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-181-1) and
eBook (978-3-03813-688-0)
Advances in Materials and Materials Processing
Eds. Zhengyi Jiang, Xianghua Liu et al.
Advanced Materials Research Vols. 652-654
Selected, peer reviewed papers from the 2012 International Conference
on Advances in Materials and Manufacturing Processes (ICAMMP
2012), December 22–23, 2012, Beihai, China. The 508 papers are
grouped as follows: Chapter 1: Composites; Chapter 2: Micro/Nano
Materials and Ceramic; Chapter 3: Polymers and Biomaterials; Chapter
4: Optical/Electronic/Magnetic Materials; Chapter 5: Chemical Materials
and Technologies; Chapter 6: Energy Materials; Chapter 7: Iron and
Steel; Chapter 8: Metal Alloy Materials; Chapter 9: Materials for
Building and Structures; Chapter 10: Mechanics of Materials; Chapter
11: Environmental. Research, Friendly Materials and Recycling Waste
Technologies; Chapter 12: Surface Engineering/Coatings; Chapter
13: Materials Forming; Chapter 14: Materials Machining; Chapter 15:
Welding & Joining; Chapter 16: Laser Processing; Chapter 17: Casting
and Solidification; Chapter 18: Geology and Mineral Processing.
Available in print (978-3-03785-620-8), 2754 pages, 2013,
US$414.00/€300.00 also available on CD (978-3-03795-399-0) and
eBook (978-3-03826-001-1)
Advances in Materials and Processing - Challenges
and Opportunities
Eds. B.S.S. Daniel et al.
Advanced Materials Research Vol. 585
The volume covers a wide range of materials research and maintains
a good balance of theoretical and applied work. In keeping with the
present trend the number of papers in Nanomaterials in the highest with
a good number in Electronic Materials and Energy Storage Materials.
Reflecting the varied interests of the Department there are quality
papers on Metallurgical themes such as Metal Casting, Mechanical
Processing and Materials Joining.
Available in print (978-3-03785-526-3), 630 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-332-7) and
eBook (978-3-03813-827-3)
For full table of contents and descriptions of each title visit our web site at: www.ttp.net 7
catalog-2013_bearbeitet.indd 7 16.09.2013 10:07:36
8. Materials Science & Engineering 2014 Advances in Materials Development
Ed. B.S.S. Daniel
Materials Science Forum Vol. 736
This Festschrift is brought out to honor Professor Ray on his sixty-fifth
birthday for his significant contribution to materials development.
The collection of invited papers by his colleagues, past students and
collaborators which make up this volume reflect the varied interests in
materials science of the man himself.
Available in print (978-3-03785-558-4), 360 pages, 2013,
US$194.00/€140.00 also available on CD (978-3-03795-342-6) and
eBook (978-3-03813-939-3)
Advances in Materials Manufacturing Science and
Technology XIV
Eds. Tian Huang, Dawei Zhang et al.
Materials Science Forum Vols. 697-698
This book contains selected papers from the 14th International
Manufacturing Conference, IMCC2011, held in China. The papers
disclose the latest developments in the field of materials manufacturing
technology: from fundamentals to new technologies and applications.
In particular, these papers cover the topics of advanced manufacturing
technology and equipment, materials-forming science and technology,
digital manufacturing systems and management, modern design theory
and methodology, and MEMS and Ultra-precision machining.
Available in print (978-3-03785-237-8), 840 pages, 2012,
US$366.00/€265.00 also available on CD (978-3-03795-062-3) and
eBook (978-3-03813-663-7)
Advances in Materials Processing Technologies
Eds. M. Marcos and J. Salguero
Advanced Materials Research Vol. 498
This volume is aimed particularly at all manufacturing engineers working
in the title fields. This collection of peer-reviewed contributions covering
the most recent advances and innovative trends in Materials Processing
Technologies (MPT) should be required reading material for anyone
operating in the industry.
Available in print (978-3-03785-359-7), 300 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-182-8) and
eBook (978-3-03813-796-2)
Advances in Materials Processing X
Eds. Chuanzhen Huang et al.
Advanced Materials Research Vol. 500
This collection of selected peer-reviewed papers includes contributions
from all over the world. The topics covered include new developments
and applications in subtractive processes including advanced and non-traditional
processes and abrasive machining, micro/nano-fabrication,
material forming, and new techniques for the processing of materials
and understanding the underlying principles of materials performance
enhancement. This volume will be a valuable reference source for
researchers in the materials processing field who wish to understand
further the underlying mechanisms and this create new and practical
technologies, systems and processes. It should also be particularly
useful to practising engineers in materials processing who are
responsible for providing efficient and effective operations.
Available in print (978-3-03785-399-3), 770 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-220-7) and
eBook (978-3-03813-816-7)
Advances in Mechatronic Systems, Mechanics
and Materials
Eds. Jerzy Garus, Piotr Szymak et al.
Solid State Phenomena Vol. 196
The special collection of peer reviewed papers contains some new
results in mechatronic systems, mechanics and materials, as well as
in aspects of control and robotics in relevant technological applications.
Therefore, the book is divided into three main chapters: mechatronics,
control and robotics, and it contains the latest theoretical and practical
experiences of scientists and researchers from universities and
research centers. The main objective of this volume is the dissemination
of the scientific knowledge to better understanding of widely considered
mechatronic and material systems. We hope that the volume will be
a source of knowledge and inspiration to scientists, researchers and
practitioners.
Available in print (978-3-03785-618-5), 230 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-398-3) and
eBook (978-3-03813-999-7)
Advances in Metallic Materials and Manufacturing
Processes for Strategic Sectors
Ed. S.V.S. Narayana Murty
Materials Science Forum Vol. 710
The 108 peer-reviewed papers of this volume reflect the latest
developments in the field of materials and manufacturing technology;
ranging from fundamentals to new technologies and applications. In
particular, the papers cover the processing of advanced materials and
the characterization of performance in critical applications. This book
provides a valuable reference source for researchers in the fields of
materials and metallurgical engineering, or manufacturing science and
technology, who wish to further their understanding of the processing
of materials and the microstructure-mechanical property correlations
underlying mechanisms, and to create innovative and practical
techniques and processes. It should also be of particular interest to
manufacturing engineers.
Available in print (978-3-03785-317-7), 820 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-142-2) and
eBook (978-3-03813-670-5)
Advances in Nanoscience and Nanotechnology
Eds. S. Velumani and N. Muthukumarasamy
Advanced Materials Research Vol. 678
In this special issue, we have several papers that are addressing the
current status of the fundamental issues related to synthesis and the
diverse applications of semiconducting nanowires and nanotubes.
The papers related to nanocrystalline polymer materials presented
in chapter IV discusses the different aspects associated with the
synthesis and properties of polymer materials and provides good scope
for researchers to carry out further research on polymer materials.
Demonstration about the usage of specific nanocrystalline materials for
efficient drug delivery and antimicrobial activities are being discussed
in chapter V under the title nanostructured materials for biological
applications and will be an impetus for carrying out research in this
area. Finally, in the chapter VI papers related to sensors and devices
using nanostructured materials give an overview about the fabrication
of devices like, field effect transistors, gas sensors and solar cells
using nanomaterials.
Available in print (978-3-03785-654-3), 418 pages, 2013,
US$166.00/€120.00 also available on CD (978-3-03795-425-6) and
eBook (978-3-03826-035-6)
8 All titles now also available on CD and eBook, for details visit www.ttp.net
catalog-2013_bearbeitet.indd 8 16.09.2013 10:07:36
9. Materials Science & Engineering 2014
Advances in Non Conventional Materials Processing
Technologies
Eds. M. Marcos et al.
Materials Science Forum Vol. 713
This work presents the most recent Advances in Non-Conventional
Materials Processing Technologies presented at the 4th Manufacturing
Engineering Society International Conference (MESIC2011), held
during September 2011 in Cadiz, Spain. Here, Forming, Simulation,
Laser, Water-Jet, Rapid Prototyping, WEDM, Grinding and Additive
Manufacturing Technologies are, among others, the main topics to be
found in this book, which is aimed especially at manufacturing engineers
who work in the above fields.
Available in print (978-3-03785-357-3), 180 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-180-4) and
eBook (978-3-03813-673-6)
Advances in Optics Manufacture
Ed. Yuegang Fu
Key Engineering Materials Vol. 552
The Asia Pacific region has become a manufacturing hub for optical
components and optoelectronics. These optical devices are widely
used in imaging optical systems, such as various consumer and
scientific products, instruments and lighting systems, etc. The papers
cover most recent research results and are grouped as follows:
Chapter 1: Design and System; Chapter 2: Fabrication; Chapter 3:
Instrumentation; Chapter 4: Laser; Chapter 5: Measurement; Chapter
6: Optical Information Processing.
Available in print (978-3-03785-691-8), 608 pages, 2013,
US$276.00/€200.00 also available on CD (978-3-03795-453-9) and
eBook (978-3-03826-072-1)
Advances in Rolling Equipment and
Technologies II - ISARET2012 -
Eds. Li Wang et al.
Advanced Materials Research Vol. 572
This work describes the latest advances in, and applications of,
advanced rolling equipment and technology. The peer-reviewed articles
cover a broad range of topics: advanced rolling processes, equipment
and technologies of strip and plate; special rolling equipment and
technologies; advanced shearing and straightening equipment and
technologies; advanced testing instruments for rolling, shearing,
leveling processes and rolled-metal quality; advanced automatic control
technologies for rolling, shearing and leveling processes; mathematical
modeling and numerical simulation of rolling, shearing and leveling
processes; assembly and maintenance of rolling equipment. This book
will be a useful reference for professionals working in the field of rolling
equipment technology.
Available in print (978-3-03785-489-1), 440 pages, 2012,
US$166.00/€120.00 also available on CD (978-3-03795-302-0) and
eBook (978-3-03813-905-8)
Advances in Textile Engineering and Materials
Eds. Huawu Liu, Yongxin Yang et al.
Advanced Materials Research Vol. 627
The collection of peer reviewed papers presents some of the latest
research and technology on all aspects of textiles and materials. The
topics addressed in this publication span the entire spectrum of research
to applications for textile technology and textile materials. This book
contains the accepted manuscripts from the areas of Textile Materials,
Technology in Textile Industry, Textile Equipment, Apparel Design,
Future Trends in Textile and Apparel Industry, Engineering Materials
and Functional Materials, Engineering Education and Management.
Available in print (978-3-03785-575-1), 950 pages, 2013,
US$276.00/€200.00 also available on CD (978-3-03795-367-9) and
eBook (978-3-03813-956-0)
AEROTECH IV - Recent Advances in Aerospace
Technologies
Eds. R. Varatharajoo et al.
Applied Mechanics and Materials Vol. 225
Advances in aerospace technologies have set new standards in
the modern world and have become the benchmark for innovations
in various fields. This special collection covers aspects of research
in aerodynamics, aerospace structures and materials, propulsion,
aerospace design, flight performance, system performance, aerospace
management and operation, space systems and aerospace reviews.
Available in print (978-3-03785-506-5), 750 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-314-3) and
eBook (978-3-03813-311-7)
Anti-Fatigue Design and Manufacturing
Technologies I
Eds. Dunwen Zuo, Chuanzhen Huang et al.
Key Engineering Materials Vol. 499
The present volume comprises peer-reviewed papers covering CIMS
and manufacturing systems, advanced anti-fatigue design technologies,
finite-element analysis and structure optimization based upon anti-fatigue,
design and manufacturing of composite components, intelligent
mechatronics and robotics, compound machine tools, rapid prototyping,
printing (ex. embossing), PDM, ERP, CRM, FMS, PLM, logistics and
supply chain, RPM and other related topics. This work will be invaluable
to production and research engineers, and to research students and
academics interested in the field.
Available in print (978-3-03785-334-4), 410 pages, 2012,
US$199.00/€144.00 also available on CD (978-3-03795-157-6) and
eBook (978-3-03813-686-6)
Applied Crystallography XXII
Eds. Danuta Stróż and Grzegorz Dercz
Solid State Phenomena Vols. 203-204
The goal of this collection is to provide the opportunity for researchers
working in many different fields to showcase their latest achievements
in the arena of structural studies, as applied to the materials commonly
used in industry. Emphasis is placed on the methods and techniques
used in structural studies, as well as on the structures and properties
of divers materials including: metals and alloys, ceramics, polymers,
quasicrystals, nanomaterials and thin films. The book comprises 98
peer-reviewed papers which provide excellent up-to-date coverage
of the subject.
Available in print (978-3-03785-754-0), 466 pages, 2013,
US$276.00/€200.00 also available on CD (978-3-03795-490-4) and
eBook (978-3-03826-135-3)
Applied Electromagnetic Engineering for Magnetic,
Superconducting and Nano Materials
Eds. A.G. Mamalis, A. Kladas et al.
Materials Science Forum Vol. 721
The 7th Japanese-Mediterranean and Central European Workshop on
Applied Electromagnetic Engineering for Magnetic Superconducting
and Nano Materials, held on the 6th to 9th July 2011 in Budapest,
Hungary, provided a forum where specialists from universities,
research centers and industrial concerns in many countries worldwide
could establish cooperation, share knowledge and experience and
engender the cross-fertilization of new ideas and developments in
the design, analysis and utilization of new materials and optimisation
For full table of contents and descriptions of each title visit our web site at: www.ttp.net 9
catalog-2013_bearbeitet.indd 9 16.09.2013 10:07:36
10. Materials Science & Engineering 2014 techniques in the areas of applied electromagnetics, superconductivity,
nanomaterials and their industrial applications in modern technologies
in electricity/electronics, transportation, bioengineering, energy and
environment.
Available in print (978-3-03785-420-4), 350 pages, 2012,
US$218.00/€158.00 also available on CD (978-3-03795-240-5) and
eBook (978-3-03813-834-1)
Baltic Polymer Symposium
Eds. Janis Zicans and Remo Merijs Meri
Key Engineering Materials Vol. 559
The issue summarizes 22 selected papers of the XII international
conference Baltic Polymer Symposium 2012, held in Liepaja, Latvia,
from 19-22 of September, 2012. Since 2001 the event is annually
organized by technical universities of the three Baltic States. Baltic
Polymer Symposium 2012 in Liepāja was visited by participants not
only from the three Baltic States, but also by participants from Taiwan,
Germany, Finland, United Kingdom, Poland, Ukraine and Russia.
The scope of the proceedings comprises all aspects of modern
polymers science: synthesis, processing, recycling, composites,
nanotechnologies etc.
Available in print (978-3-03785-708-3), 150 pages, 2013,
US$124.00/€90.00 also available on CD (978-3-03795-457-7) and
eBook (978-3-03826-089-9)
Behaviour of Material and Composite Structures
Ed. Moussa Karama
Key Engineering Materials Vol. 498
Aerospace vehicle applications have always been at the cutting edge of
structures and materials research because of the essential requirement
for lightweight construction as well as the need to combine safety
with performance. New advanced materials, such as composites with
toughened thermosetting matrices, thermoplastic composites, and
metal-matrix or ceramic-matrix composites, are constantly proposed.
In addition to the ongoing challenge of developing new materials, many
research issues remain open regarding conventional metallic aero-structures.
These include life extension in aging aircraft, and proper
methods of vibration control. These 19 peer-reviewed papers gather
together the latest knowledge related to the “Behaviour of Material and
Composite Structures” title of this volume.
Available in print (978-3-03785-330-6), 250 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-154-5) and
eBook (978-3-03813-685-9)
Behaviour of Materials
Eds. Moussa Karama and Joël Alexis
Key Engineering Materials Vol. 550
The selection of articles in this special issue is dedicated to the
important topics pertaining to the understanding and determination
of the mechanical behaviour of engineering materials under different
regimes of loading.
Available in print (978-3-03785-673-4), 234 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-439-3) and
eBook (978-3-03826-054-7)
Bioceramics 23
Eds. Eyup Sabri Kayali et al.
Key Engineering Materials Vols. 493-494
The Symposium and Annual Meeting of the International Society for
Ceramics in Medicine, known as Bioceramics, provides a valuable
forum where scientists and clinicians working in the dental and medical
fields can discuss the exciting advances made in basic and applied
research, and promote new technologies and applications of ceramics
in medicine. These proceedings comprise 174 papers presented at the
23rd Symposium and Annual Meeting of the International Society for
Ceramics in Medicine (ISCM) held on November 6-9th, 2011 in Istanbul,
Turkey. In Bioceramics 23, the papers have been categorized into 21
of the most topical and essential themes of ceramics in medicine:
including characterization, design and processing technologies, tissue
engineering, nanotechnology, surface modification, composites, drug
delivery and interdisciplinary studies. The work will thus be of great help
in taking advantage of the merits of ceramics, and overcoming their
weakness in various applications involving polymers and metals.
Available in print (978-3-03785-255-2), 1000 pages, 2012,
US$414.00/€300.00 also available on CD (978-3-03795-080-7) and
eBook (978-3-03813-680-4)
Bioceramics 24
Eds. Kunio Ishikawa et al.
Key Engineering Materials Vols. 529-530
The proceedings of the 24th annual meeting of the International Society
for Ceramics in Medicine (Bioceramics 24), held in Japan, comprise 133
peer-reviewed papers arranged into 13 chapters: I. Advanced Calcium
Phosphate Ceramics; II. Porous Materials; III. Cements; IV. Coatings;
V. in vivo Studies and Clinical Application; VI. Cell Studies and Cell-
Material Interactions; VII. Composites; VIII. Drug Delivery Carriers; IX.
Dental Materials; X. Metals; XI. Zirconia and Alumina Ceramics; XII.
Nano-Materials; XIII. Sol-Gel Synthesis and Other Materials. They will
be of great help in exploiting the merits of ceramics and in overcoming
their weakness in applications involving polymers and metals.
Available in print (978-3-03785-517-1), 680 pages, 2013,
US$331.00/€240.00 also available on CD (978-3-03795-323-5) and
eBook (978-3-03813-437-4)
Biomaterials and Applications
Ed. Tawee Tunkasiri
Advanced Materials Research Vol. 506
These proceedings bring together the invited and contributed articles
presented at Chiang Mai International Conference on Biomaterials &
Applications (CMICBA 2011). The main emphasis of the conference was
placed on (a) biomaterials science and related disciplines, including
mathematics, physics, biology and chemistry, in conjunction with (b)
applications of biomaterials in areas such as life sciences, cosmetics,
agriculture and the environment.
Available in print (978-3-03785-406-8), 646 pages, 2012,
US$207.00/€150.00 also available on CD (978-3-03795-227-6) and
eBook (978-3-03813-821-1)
Biomedical Applications of Smart Technologies
Eds. Pietro Vincenzini et al.
Advances in Science and Technology Vol. 86
The 16 peer-reviewed papers collected here together offer a
plenitude of up-to-date information on “Biomedical Applications of
Smart Technologies”. The papers are conveniently arranged into:
Chapter 1: Active and Stimuli Responsive Materials, Chapter 2:
Medical Diagnostics and Imaging, Chapter 3: Tissue Engineering
and Regenerative Medicine, Chapter 4: Targeted Drug and Gene
Delivery.
Available in print (978-3-908158-72-1), 122 pages, 2013,
US$130.00/€95.00 also available on CD (978-3-908158-83-7) and
eBook (978-3-908158-94-3)
10 All titles now also available on CD and eBook, for details visit www.ttp.net
catalog-2013_bearbeitet.indd 10 16.09.2013 10:07:36
11. Materials Science & Engineering 2014
Bone and Biomaterials for Bone Tissue Engineering
Eds. Alessandra Bianco, Ilaria Cacciotti et al.
Key Engineering Materials Vol. 541
This Special Topic Volume comprises selected peer-reviewed papers
from the international scientific community on the topic of “Bone and
biomaterials for bone tissue engineering”. The volume covers some
relevant aspects spanning from bone tissue mechanics to scaffolding for
bone tissue engineering in terms of microstructure, biological evaluation,
fabrication technologies, surface modifications and coatings. The aim
of this collection was to provide an interdisciplinary panorama on this
emerging and promising biomedical field.
Available in print (978-3-03785-582-9), 150 pages, 2013,
US$110.00/€80.00 also available on CD (978-3-03795-364-8) and
eBook (978-3-03813-963-8)
Building Materials and Structural Engineering II
Eds. Zhiming Shi
Advanced Materials Research Vol. 743
Collection of selected, peer reviewed papers from the 2013 2nd
International Conference on Building Materials and Structural
Engineering (BMSE2013), May 24-25, 2013, Beijing, China. The
54 papers are grouped as follows: Chapter 1: Research on Building
Engineering and Building Materials; Chapter 2: Structures Engineering;
Chapter 3: Research on Applied Materials; Chapter 4: Related Topics.
Available in print (978-3-03785-753-3), 276 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-489-8) and
eBook (978-3-03826-134-6)
Characterization of Advanced Materials
Ed. R. Saravanan
Materials Science Forum Vol. 699
This special-topic volume includes two review articles written by eminent
scientists in India, plus original articles by researchers working in various
Indian research and academic institutions. The articles describe the
results of analyses carried out on important materials that are useful
to human society, and many characterization techniques have been
reported for the analysis of various types of material. It is expected
that this work will be very useful to scientists, researchers, academics,
scholars and students working at various levels in academic, research
and industrial institutions.
Available in print (978-3-03785-254-5), 320 pages, 2012,
US$166.00/€120.00 also available on CD (978-3-03795-079-1) and
eBook (978-3-03813-664-4)
Chinese Ceramics Communications II
Eds. Cheng Zhang et al.
Advanced Materials Research Vol. 412
Powders are the raw material for ceramics; the starting compositions
for preparing bulk or film products. In addition, powders are used
as additives to metals, polymers and composites. Whatever their
function, powders - their characteristics and performance - govern the
properties and quality of finished materials and products. Therefore, the
importance of powders, including their synthesis and testing, cannot
be overstated. The objective of this collection of peer-reviewed papers
was to provide a forum where researchers, engineers and students
could disseminate their latest research results and exchange views
concerning the latest developments in novel technologies for fabricating
and analyzing ceramic powders. This work is an essential guide to
the above topics.
Available in print (978-3-03785-323-8), 500 pages, 2012,
US$242.00/€175.00 also available on CD (978-3-03795-147-7) and
eBook (978-3-03813-776-4)
Chinese Ceramics Communications III
Eds. Jin Hu, Nanchun Chen et al.
Advanced Materials Research Vol. 624
Powders are root materials for ceramics, as the starting compositions to
prepare bulks or films. In addition, powders are usually used as additives
for metals, polymers and composites. In general, the characteristics and
performances of the powders dominate the properties and quality of final
materials or products. Therefore, the importance of powders, including
synthesizing and testing, will never be overstated. The objective of
2012 Workshop on the Synthesis, Characterization and applications
of inorganic powders, therefore, is to provide a forum for researchers,
engineers and students, to disseminate their latest research results and
exchange experimental views concerning the latest developments in
the novel technology to fabricate and analyze ceramic powders and
also the preparation and characterization of bulk ceramics. The present
Proceedings collected 73 papers presented in this Workshop.
Available in print (978-3-03785-567-6), 326 pages, 2013,
US$200.00/€145.00 also available on CD (978-3-03795-362-4) and
eBook (978-3-03813-948-5)
Complete set of CONGRESS of CIMTEC 2012
Eds. Pietro Vincenzini et al.
Advances in Science and Technology Vol. 77-86
These are the proceedings of the 4th International Conference on
“Smart Materials, Structures and Systems”. The conference was held
in Montecatini Terme, Italy on June 10-14, 2012. Indeed, the intensive
research carried out worldwide for creating higher forms of materials,
structures and systems by providing them with “life” functions, resulted
already in a high level of technology readiness with several applications
now emerging, which demonstrate smart materials technologies to
have matured well beyond the conceptual stage. Widespread use of
nanotechnology concepts and tools and the availability of multiscale
computational models coupled with the exponential growth of computer
capability are fuelling the rate of advancement of the field. This also is
increasingly taking advantage from the merging of materials science
and engineering from information deriving from a deeper understanding
of biological processes and from the highly effective evolutionary
solutions created by nature along million years.
Available in print (978-3-908158-73-8), 1594 pages, 2013,
US$690.00/€500.00 also available on CD (978-3-908158-84-4) and
eBook (978-3-908158-73-8)
Condensed Matter and Materials Physics
Eds. Prafulla K. Jha, Arun Pratap et al.
Advanced Materials Research Vol. 665
This collection highlights the frontiers of current research in condensed
matter and materials physics. Emphasis is placed upon the presentation
of current status of the condensed matter and materials physics that
could facilitate decisions and future directions of research. The book
comprises 56 peer-reviewed papers which provide an excellent and
up-to-date coverage of the subject.
Available in print (978-3-03785-625-3), 414 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-404-1) and
eBook (978-3-03826-006-6)
Cost-Affordable Titanium IV
Eds. M. Ashraf Imam, F. H. (Sam) Froes et al.
Key Engineering Materials Vol. 551
The diverse mix of papers presented here reflect the breadth of activities
in the cost affordable use of titanium and emerging applications. The
opening overview paper, by the editors, attempts to present a broad
view of present and projected titanium cost reduction, both in titanium
production and in subsequent processing. What is particularly clear
is that the impetus for broadening markets for titanium is very much
dependent on cost reduction methods, particularly cost sensitive
For full table of contents and descriptions of each title visit our web site at: www.ttp.net 11
catalog-2013_bearbeitet.indd 11 16.09.2013 10:07:36
12. Materials Science & Engineering 2014 industrial applications such as the auto industry. The papers are
grouped into four chapters and these are: Overview and Low Cost
Processing, Powder Consolidation and Characterization, Creative
Processing and Low Cost Materials and Properties.
Available in print (978-3-03785-677-2), 238 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-442-3) and
eBook (978-3-03826-058-5)
Damage Assessment of Structures X
Ed. Biswajit Basu
Key Engineering Materials Vols. 569-570
Damage assessment of structures is an emerging field and has
become increasingly important over the past decade or two. Diagnosis
and prognosis of structural damage plays an important role not just
in ensuring the structural integrity but also in optimizing the overall
life cycle cost including the cost for operation and maintenance. The
Special collection consists of a compilation 159 papers on all research
topics relevant to damage assessment of engineering structures and
systems including numerical simulations, signal processing of sensor
measurements, theoretical and experimental studies. Broad areas of
damage assessment covered in the publication include applications
to composite materials, civil infrastructure, mechanical devices and
machineries, renewable energy, sensors, signal processing, structural
health and condition monitoring.
Available in print (978-3-03785-796-0), 1330 pages, 2013,
US$370.00/€268.00 also available on CD (978-3-03795-522-2) and
eBook (978-3-03826-177-3)
Defects and Diffusion in Ceramics XIII
Ed. D.J. Fisher
Defect and Diffusion Forum Vol. 330
The increasingly pressing requirements of environmental and natural
resource protection, while achieving sustainable development, bring
more opportunities to the fields of civil engineering, architecture,
hydraulic engineering and infrastructure development. This book
highlights the latest developments in, and applications of, advanced
and sustainable materials, innovations in civil and hydraulic engineering,
innovations in architecture and building construction, and innovations
in bridge and underground engineering.
Available in print (978-3-03785-533-1), 272 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-337-2) and
eBook (978-3-03813-914-0)
Defects and Diffusion in Semiconductors XIV
Ed. David J.Fisher
Defect and Diffusion Forum Vol. 332
This 14th volume in the series covers the latest results in the field of
Defects and Diffusion in Semiconductor. The issue also includes some
original papers: An Experimental Study of the Thermal Properties of
Modified 9Cr-1Mo Steel; Physico-Mechanical Properties of Sintered
Iron-Silica Sand Nanoparticle Composites: A Preliminary Study; Defect
and Dislocation Density Parameters of 5251 Al Alloy Using Positron
Annihilation Lifetime Technique; A Novel Computational Strategy to
Enhance the Ability of Elaborate Search by Entire Swarm to Find the
Best Solution in Optimization of AMCs; Synthesis and Characterization
of Novel Nanoceramic Magnesium Ferrite Material Doped with
Samarium and Dysprosium for Designing – Microstrip Patch Antenna;
ZnO Varistor Defective Gd and Pr Ions; Injecting CO2 and Pumping Out
Saline Formation Water Simultaneously to Control Pressure Build-Up
while Storing CO2 in Deep Saline Aquifers; Studying the Effect of Low
α-Radiation Doses on CR-39 Polymers Using Positron Annihilation
Lifetime and Mechanical Properties.
Available in print (978-3-03785-605-5), 173 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-386-0) and
eBook (978-3-03813-986-7)
Defects and Diffusion Theory and Simulation III
Ed. D.J. Fisher
Defect and Diffusion Forum Vol. 321
This volume on materials engineering comprises a collection of
abstracts of recent scholarly papers and articles concerning a wide
variety of topics related to the effects of structural defects and diffusion
in many material areas, including thin-film manufacturing and facing
metals.
Available in print (978-3-03785-362-7), 180 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-185-9) and
eBook (978-3-03813-701-6)
Defects-Recognition, Imaging and Physics in
Semiconductors XIV
Eds. Hiroshi Yamada-Kaneta et al.
Materials Science Forum Vol. 725
This volume documents the latest understanding of many topics
of current interest in the science and technology of defects in
semiconductors. The investigation of defects in semiconductors is
a little different to that in other fields of materials science: in order to
observe defects in semiconductors and elucidate their physical nature,
a very wide range of tools and techniques has been introduced or
created; thanks to the inventive ideas of the researchers. This work
clearly reflects the lively state of defect investigation in semiconductors.
Available in print (978-3-03785-442-6), 324 pages, 2012,
US$166.00/€120.00 also available on CD (978-3-03795-261-0) and
eBook (978-3-03813-856-3)
Deformation and Fracture in Technological Processes
Eds. Y.-M Hwang et al.
Key Engineering Materials Vol. 528
This special collection of peer-reviewed papers focuses on mechanical
approaches to the experimental study and modeling of the deformation
processes and defect formation accompanying various technologies.
A series of papers was devoted to the processes of metal-forming.
Special attention was paid to the question of micro- and nano-structure
adjustment during processes such as extrusion and microtube press-bending.
Other papers covered models for damage accumulation and
healing, as well as fracture prediction during metal forming.
Available in print (978-3-03785-508-9), 224 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-316-7) and
eBook (978-3-03813-313-1)
Diffusion in Carbon Allotropes
Ed. D.J. Fisher
Defect and Diffusion Forum Vol. 339
Carbon has always been an essential feature of human civilisation
(not to mention the human constitution), whether as mere fuel, as an
expensive bauble or as an essential component of those two supporting
pillars (organic chemicals, steel) of the industrial revolution. Even since
its recognition as an element, 2¼ centuries ago, it has never ceased
to offer new surprises and properties. Just decades ago, students
had to contend with only two main forms, graphite and diamond, but
nowadays there is a plethora of nanotubes, fullerenes, graphenes,
etc. The present volume offers a compilation (over 400 items) of data
on mass diffusion, in all of the various known allotropes of carbon,
spanning some 6 decades.
Available in print (978-3-03785-772-4), 210 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-506-2) and
eBook (978-3-03826-153-7)
12 All titles now also available on CD and eBook, for details visit www.ttp.net
catalog-2013_bearbeitet.indd 12 16.09.2013 10:07:36
13. Materials Science & Engineering 2014
Diffusion in Materials - DIMAT 2011
Eds. I. Bezverkhyy et al.
Defect and Diffusion Forum Vols. 323-325
The International Conference on Diffusion in Materials (DIMAT)
is the benchmark conference series for diffusion in solids. DIMAT
2011 was organized by the University of Bourgogne in association
with CNRS, Dijon (France). The conference showcased new
results concerning theoretical tools as well as applied research
approaches. Diffusion processes affect all types of materials:
nanomaterials, materials for energy, metallurgy, glasses and
ceramics, but each requires its own numerical tools. This volume
comprises most of the contributions presented at DIMAT 2011:
4 plenary lectures delivered by famous high-level scientists plus 88
contributions in the form of keynote lectures, talks and posters.
Available in print (978-3-03785-397-9), 600 pages, 2012,
US$331.00/€240.00 also available on CD (978-3-03795-219-1) and
eBook (978-3-03813-703-0)
Diffusion in Solids and Liquids VII
Eds. Andreas Öchsner et al.
Defect and Diffusion Forum Vols. 326-328
This special issue of Defect and Diffusion Forum contains selected
refereed papers which were presented at the 7th International
Conference on Diffusion in Solids and Liquids (DSL-2011) held on the
26 to 30th June 2011 at the Hilton Vilamoura, Algarve, Portugal. The
goal of the conference was to provide a unique opportunity to exchange
information, to present the latest results and review burning issues
in contemporary diffusion research. Young scientists were especially
encouraged to attend the conference and to establish international links
with established scientists.
Available in print (978-3-03785-400-6), 760 pages, 2012,
US$414.00/€300.00 also available on CD (978-3-03795-221-4) and
eBook (978-3-03813-704-7)
Diffusion in Solids and Liquids VIII
Eds. Andreas Öchsner, Graeme E. Murch et al.
Defect and Diffusion Forum Vols. 334-335
This special issue contains selected peer-reviewed papers presented
at the Eighth International Conference on Diffusion in Solids and
Liquids (DSL-2012) held at the Hotel Kalyon Istanbul, Turkey during
the period 25th-29th June, 2012.The goal of the conference was to
provide a unique opportunity to exchange information, to present the
latest results as well as to review the relevant issues on contemporary
diffusion research. Young scientists were especially encouraged to
attend the conference and to establish international networks with
well-known scientists.
Available in print (978-3-03785-662-8), 424 pages, 2013,
US$276.00/€200.00 also available on CD (978-3-03795-429-4) and
eBook (978-3-03826-043-1)
Digital Design and Manufacturing Technology III
Ed. Yangyu Wang
Key Engineering Materials Vol. 546
China has become the manufacturing center of the world. Advanced
digital design and manufacturing technology can improve productivity
and reduce the costs of product development. It has become the
most important techniques to enhance ones competitiveness to win
advantage in the market. At the same time, it has a huge potential for
development and improvement. This volume contains 34 selected peer
reviewed papers from 2012 National Conference on Digital Design
and Manufacturing Technology (2012 DDMTC) which was held during
November 12-14, 2012, in Ningbo, P.R. China.
Available in print (978-3-03785-626-0), 190 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-405-8) and
eBook (978-3-03826-007-3)
Dislocation Reactions and Stacking-Fault Energies
Ed. D.J. Fisher
Defect and Diffusion Forum Vol. 329
Volume 329 of the journal, Defect and Diffusion Forum, comprises a
handy compilation of data on dislocation reactions, and stacking-fault
energies for a wide range of materials including carbon, carbides,
nitrides, oxides, silica, silicates and borides. It also contains original
papers on the Interaction with Vacancies in Tungsten, Defects in
Pure Aluminum and 3003 Aluminum Alloy, Nanocrystalline NiAl
Alloys Prepared by Mechanical Alloying, Activation Enthalpy for
Defect Formation in 5754 Alloys, Defect Analysis of 316LSS during
Powder Injection Moulding, Effect of Hydrogen on the Microhardness
of Tin Brass Heat Exchanger Tube, Nuclear and Electrical Methods
for Estimating the Activation Enthalpy of Defect Formation in 2024
Alloys, Artificial Ageing Effect on 2024 Alloy, Natural Convection Flow
Simulation of Nanofluid in a Square Cavity, Theoretical Models for Point
Defect Calculations, Diffusion Problem of New Phase Inclusion Growth
in Bounded Regions of Oversaturated Solid Solution, Pressureless
Sintering and Characterization of Al2O3-SiO2-ZrO2 Composites,
Electrical Properties of Zr-Doped La2O3 Nanocrystallites, Effect of Post-
Deposition Annealing on Optical Properties of Thermally-Evaporated
V2O5 Thin Film, Electrical Conductivity and Phase Transition Studies in
the ZrO2-CdO System, Growth of ZnO Thin Films on Silicon Substrates
by Atomic Layer Deposition, Observation of Dielectric Peaks in Glassy
Se70Te20Sn10 Alloy, Spin Hamiltonian Parameters for the Tetragonal
[Fe(CN)4Cl2]5- Complex in NaCl.
Available in print (978-3-03785-477-8), 284 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-290-0) and
eBook (978-3-03813-653-8)
Eco-Dyeing, Finishing and Green Chemistry
Eds. Jianzhong Shao et al.
Advanced Materials Research Vol. 441
EDFGC is an international conference series covering research and
development in the fields of textile dyeing/finishing and green chemistry.
With its theme of “Innovation, Eco-Textile and Sustainability”, the 2011
conference provided a platform for the presentation of research findings,
the exchange of innovative ideas and the seeking-out of opportunities
for collaboration, in the above fields, among both academics and
industrialists all over the world. The proceedings of EDFGC 2011
include Eco-Dyeing & Finishing, Functional Textiles, Green Chemistry
and Functional Chemicals, Pollution Control and Energy Conservation,
Fundamental Research and Test & Characterization.
Available in print (978-3-03785-343-6), 800 pages, 2012,
US$345.00/€250.00 also available on CD (978-3-03795-165-1) and
eBook (978-3-03813-786-3)
Eco-Materials Processing and Design XIII
Eds. Jing Sun, Lian Gao et al.
Materials Science Forum Vol. 724
This work brings together 465 peer-reviewed papers on Advanced
Materials and Engineering Technology. It will certainly promote the
development of these fields, strengthen international academic
cooperation and communication and engender the exchange of
research ideas. It provides the reader with a broad overview of the latest
advances in the field of advanced materials and engineering technology.
Available in print (978-3-03785-439-6), 500 pages, 2012,
US$276.00/€200.00 also available on CD (978-3-03795-258-0) and
eBook (978-3-03813-853-2)
Eco-Materials Processing and Design XIV
Eds. T. Kai, K. Mizuta, T. Nakazato et al.
Materials Science Forum Vol. 761
The collection of 34 peer reviewed papers covers the following
five topics: (A) Materials for energy conversion, solar cell and
For full table of contents and descriptions of each title visit our web site at: www.ttp.net 13
catalog-2013_bearbeitet.indd 13 16.09.2013 10:07:36
14. Materials Science & Engineering 2014 new energy, (B) Photocatalysis and semiconducting materials, (C)
Processing and design for eco-materials, (D) Bio-inspired materials
and hybrid materials, and (E) Porous and nanostructured materials.
Available in print (978-3-03785-714-4), 190 pages, 2013,
US$124.00/€90.00 also available on CD (978-3-03795-467-6) and
eBook (978-3-03826-095-0)
Electroactive Polymers: Advances in
Materials and Devices
Eds. Pietro Vincenzini et al.
Advances in Science and Technology Vol. 79
The 14 peer-reviewed papers collected here together offer a plenitude
of up-to-date information on “Electroactive Polymers: Advances in
Materials and Devices”. The papers are conveniently arranged into:
Chapter 1: EAP Materials and Analysis of Physical Mechanisms,
Chapter 2: Device Development and Applications.
Available in print (978-3-908158-65-3), 114 pages, 2013,
US$130.00/€95.00 also available on CD (978-3-908158-76-9) and
eBook (978-3-908158-87-5)
Electroceramics in Japan XV
Eds. K. Katayama, K. Kato, K. Shinozaki et al.
Key Engineering Materials Vol. 566
The major topics covered by this collection include dielectrics,
piezoelectric ceramics, ferroelectrics, lead free piezoelectric ceramics,
Li-ion battery related materials, secondary batteries, solid oxide fuel
cells, dye-sensitized solar cells, properties and processing of thin films,
magnetic ceramics, semiconductor ceramics, sensors, and ceramic
science and processing. The microstructure of materials varied between
single crystals, bulk ceramics, thin films, and nanocrystals. All papers
collected in this book were reviewed and cover the latest developments
in science and technology of electroceramics.
Available in print (978-3-03785-761-8), 328 pages 2013,
US$207.00/€150.00 also available on CD (978-3-03795-497-3) and
eBook (978-3-03826-142-1)
Electron Microscopy XIV
Eds. Danuta Stróż and Krystian Prusik
Solid State Phenomena Vol. 186
These are the proceedings of the XIV International Conference on
Electron Microscopy (EM2011) held in Wisła, Poland from the 26 to 30th
June 2011. The goal of the conference was to provide a forum where
researchers from many different countries could exchange their latest
advances in the field of structural studies, regarding the use of electron
microscopic techniques as applied to various materials. Plenary and
invited lectures offered overviews of exciting new developments which
highlighted the applications of new electron microscopic techniques
in physics, chemistry, materials science and in life and earth sciences.
The papers cover topics such as electron, holography, tomography,
HREM, STEM, EBSD, ED and precession techniques - as well as their
application to materials science and related disciplines.
Available in print (978-3-03785-381-8), 350 pages, 2012,
US$166.00/€120.00 also available on CD (978-3-03795-204-7) and
eBook (978-3-03813-699-6)
Electrophoretic Deposition: Fundamentals and
Applications IV
Eds. A. R. Boccaccini et al.
Key Engineering Materials Vol. 507
The contributions to this special collection cover a wide range of
subject areas related to EPD and reflect the impressive versatility of
that technique for materials processing. The topics discussed range
from theoretical studies of the fundamental mechanisms of EPD, to
novel techniques which exploit EPD for the efficient and cost-effective
fabrication of a variety of advanced materials.
Available in print (978-3-03785-379-5), 260 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-202-3) and
eBook (978-3-03813-692-7)
Embodying Intelligence in Structures and
Integrated Systems
Eds. Pietro Vincenzini et al.
Advances in Science and Technology Vol. 83
The 27 peer-reviewed papers collected here together offer a plenitude
of up-to-date information on “Embodying Intelligence in Structures
and Integrated Systems”. The papers are conveniently arranged into:
Chapter 1: Smart Materials, Sensors, Actuators, MEMS, Chapter 2:
Integration Technologies, Chapter 3: Smart Structures and Integrated
Systems, Chapter 4: Structural Health Monitoring and Control.
Available in print (978-3-908158-69-1), 254 pages, 2013,
US$166.00/€120.00 also available on CD (978-3-908158-80-6) and
eBook (978-3-908158-91-2)
Emerging Technology in Precision Engineering XIV
Eds. Tojiro Aoyama et al.
Key Engineering Materials Vols. 523-524
These 189 conference papers cover a wide variety of topical areas,
including: high-precision machining, non-conventional machining, CAD/
CAM technology, machine tools and control, MEMS/NEMS, precision/
medical devices, mechatronics, mechanical design and tribology,
metrology, green manufacturing, advanced molding and forming and
other related technologies. This work will certainly stimulate further
research and development in the field of precision engineering.
Available in print (978-3-03785-509-6), 1140 pages, 2012,
US$435.00/€315.00 also available on CD (978-3-03795-317-4) and
eBook (978-3-03813-314-8)
Energy and Environment Materials
Eds. Xinfeng Tang, Ying Wu, Yan Yao et al.
Materials Science Forum Vols. 743-744
The collection of peer reviewed papers from C-MRS 2012 meeting
includes 149 papers selected from Symposium A: Advanced energy
materials and technology, Symposium B: Thermoelectric materials,
Symposium C: Green building materials, Symposium D: Environment
functional materials, Symposium E: Photo-catalytic materials and its
application for energy and environment, and Symposium F: Solar
energy materials and technology.
Available in print (978-3-03785-606-2), 1002 pages, 2013,
US$276.00/€200.00 also available on CD (978-3-03795-389-1) and
eBook (978-3-03813-987-4)
Energy Efficient Technologies for Sustainability
Eds. R. Edwin Raj et al.
Advanced Materials Research Vol. 768
Energy is the major driving force for the economy of any nation. The
challenge for continuous generation of power to meet the ever growing
demand is a daunting task, especially due to limited resources. This
collection of peer reviewed papers contains original research articles
in different areas of energy efficient technologies such as: Alternate
Energy, Building Technologies, Automotive Technologies, Modeling and
Design, Manufacturing Systems and Power Systems. We hope that
the novel ideas presented in these papers will trigger more application
oriented research in relation with latest technology to conserve and
sustain energy.
Available in print (978-3-03785-782-3), 430 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-514-7) and
eBook (978-3-03826-163-6)
14 All titles now also available on CD and eBook, for details visit www.ttp.net
catalog-2013_bearbeitet.indd 14 16.09.2013 10:07:36
15. Materials Science & Engineering 2014
Engineering Applications of Nanoscience and
Nanomaterials
Eds. Ajay Bansal and Rajesh J. Tayade
Materials Science Forum Vol. 757
This Special Topic Volume is a result from contribution of thirty seven
experts from the international scientific community in the respective
field of research. It thoroughly covers various engineering applications
of nanomaterials in various fields such as catalysis, sun protective
materials, organic synthesis, sensor, coatings, energy efficient hear
transfer, thermoplastics, waste water treatment, electronic component,
solid oxide fuel cell and photocatalysis. It gives a comprehensive picture
of nanoscience and nanomaterials. This volume will provide the latest
and in-depth coverage on nanomaterials and their applications.
Available in print (978-3-03785-701-4), 306 pages, 2013,
US$166.00/€120.00 also available on CD (978-3-03795-461-4) and
eBook (978-3-03826-082-0)
Engineering Materials and Tribology
Ed. Irina Hussainova
Key Engineering Materials Vol. 527
The Baltic International Conferences on Materials Engineering and
Tribology were initiated 19 years ago and focus on materials issues
and tribological studies. During this period, BALTMATTRIB has become
an open forum where researchers and engineers can exchange ideas,
share thoughts and encourage development and cooperation in both
basic and applied research in the fields of materials science, powder
metallurgy, surface engineering and tribology.
Available in print (978-3-03785-500-3), 270 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-306-8) and
eBook (978-3-03813-660-6)
enviBUILD 2012
Eds. Miloš Kalousek, Martin Němeček et al.
Advanced Materials Research Vol. 649
Indoor quality of buildings has a direct impact on its inhabitants. The
design of a building needs should include a healthy environment and
if possible include application of building materials which are free
of harmful substances and allow a low energy design. The building
industry nowadays should concentrate on low energy buildings and put
emphasis on natural materials and renewable resources, so todays aim
is to decrease the energy requirements and contribute to a healthier
indoor environment in buildings and to sustainable development. The
peer reviewed papers are grouped as follows: Chapter 1: Near Zero
Energy Buildings; Chapter 2: Quality of Indoor Environment; Chapter
3: Heat Storage and Energy Savings; Chapter 4: Effective Ventilation;
Chapter 5: Integration of Renewable Energy Sources; Chapter 6:
Natural and Environmental Friendly Building Materials; Chapter 7:
Noise Protection; Chapter 8: Building Simulation.
Available in print (978-3-03785-596-6), 334 pages, 2013,
US$130.00/€94.00 also available on CD (978-3-03795-382-2) and
ebook (978-3-03813-977-5)
Environmental Degradation of Engineering Materials
& Materials Engineering and Technologies
Eds. Jerzy Labanowski and Andrzej Zieliński
Solid State Phenomena Vol. 183
The purpose of this collection is to disseminate the latest developments
in the field of the environmental degradation of structural materials,
hydrogen degradation, stress corrosion cracking, hydrogen and
corrosion fatigue. The result is an excellent guide to the experimental
study and modeling of environmentally-assisted cracking, advanced
materials technologies and case studies of materials failure in various
industrial applications.
Available in print (978-3-03785-320-7), 268 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-145-3) and
eBook (978-3-03813-696-5)
Fatigue Failure and Fracture Mechanics
Ed. Dariusz Skibicki
Materials Science Forum Vol. 726
The subjects covered by this special collection include the fatigue life
of elements of structures, research on low- and high-cycle fatigue,
fatigue under conditions of complex states of stress and strain, analysis
of fatigue loads, design taking fatigue into consideration, analysis of
random fatigue loads, experimental methods in the mechanics of
cracking, application of fracture mechanics to engineering issues, the
impact of structural, technological and functional factors upon the
fatigue of elements of structures, research methods and equipment.
This coverage makes the work a veritable handbook guide to the
subject matter.
Available in print (978-3-03785-487-7), 250 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-300-6) and
eBook (978-3-03813-903-4)
Ferrites and Ceramic Composites
Eds. Rajshree B. Jotania and Hardev S. Virk
Solid State Phenomena Vol. 202
The Ferrite term is used to refer to all magnetic oxides containing iron
as major metallic component. Ferrites are very attractive materials
because they simultaneously show high resistivity and high saturation
magnetization, and attract now considerable attention, because of the
interesting physics involved. Typical ferrite material possesses excellent
chemical stability, high corrosion resistivity, magneto-crystalline
anisotropy, magneto-striction, and magneto-optical properties. Ferrites
belong to the group of ferrimagnetic oxides, and include rare-earth
garnets and ortho–ferrites. Several new hard and soft ferrites, garnets
and their composite systems have been developed during recent
years, with very large potential applications, which include bio-sensors,
targeted drug delivery, magnetic imaging pigments, anti radar coating,
microwave components, transparent magnetic plastics, etc. From
physical point of view, ferrites present an extremely interesting class
of systems with challenging problems. Hence this special volume was
prepared with focus on some of these topics of interest to university
researchers and entrepreneurs in industry.
Available in print (978-3-03785-731-1), 224 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-479-9) and
eBook (978-3-03826-112-4)
Ferroics and Multiferroics
Eds. Hardev Singh Virk and Wolfgang Kleemann
Solid State Phenomena Vol. 189
Multiferroics: that is, materials which simultaneously exhibit both
ferromagnetism and ferroelectricity - and also often ferroelasticity -
now attract considerable attention because of the interesting physics
involved and their promise for important practical applications. Typical
multiferroics belong to the perovskite group of transition metal oxides,
and include rare-earth manganites and ferrites. Several new multiferroic
systems have been developed, during recent years, which exhibit
very strong coupling between the ferroelectric and magnetic degrees
of freedom. The present volume comprises both review articles, and
research papers on various themes; with very little overlap. The authors
of the review papers have generally kept in mind the unfamiliarity, of
the field of ‘Ferroics and Multiferroics’, to newcomers. They cover the
historical development of the field, and add their own contributions.
Available in print (978-3-03785-431-0), 290 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-250-4) and
eBook (978-3-03813-845-7)
For full table of contents and descriptions of each title visit our web site at: www.ttp.net 15
catalog-2013_bearbeitet.indd 15 16.09.2013 10:07:36
16. Materials Science & Engineering 2014 Frontier of Nanoscience and Technology II
Eds. Jimmy (C.M.) Kao et al.
Advanced Materials Research Vol. 528
This book comprises 62 peer-reviewed papers on the topics of
Nanoscience and Materials Technology, and has the aim of promoting
the development of Nanoscience and Materials Technology,
strengthening international academic cooperation and communications
and exchanging research ideas. This work provides readers with a
broad overview of the latest advances in the field of Nanoscience and
Materials Technology.
Available in print (978-3-03785-429-7), 310 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-248-1) and
eBook (978-3-03813-843-3)
Functional and Structural Materials II
Eds. Silvio de Barros et al.
Materials Science Forum Vol. 758
This special issue presents 21 selected peer reviewed papers from
the 2nd Brazilian Symposium on Functional and Structural Materials
(FUNCMAT 2013), held in Rio de Janeiro, Brazil, on April 25-26,
2013. These articles provide an up-to-date knowledge concerning
the field of functional and structural materials such as shape memory
alloys, geopolymers, piezoelectric ceramics and special alloys. The
articles therein deal with recent investigations on materials used
in manufacturing processes like machining, welding, coating and
adhesive bonding.
Available in print (978-3-03785-698-7), 200 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-458-4) and
eBook (978-3-03826-079-0)
Functional Materials and Nanotechnology
Eds. B. Xu and H.Y. Li
Advanced Materials Research Vol. 496
These are the proceedings of the International Conference on
Functional Materials and Nanotechnology (FMN2012), held on the
19 and 20th May, 2012, in Zhengzhou, P.R. China. They focus on
Functional Materials and Nanotechnology. The peer-reviewed papers
are divided into Chapter 1: Advanced Materials Engineering and
Nanotechnology; Chapter 2: Nanotechnology, Mechanics and Materials
Science; Chapter 3: Materials Applications, Green Chemistry and
Mining Engineering; Chapter 4: Materials, Biotechnology, Manufacturing
Engineering and Environment.
Available in print (978-3-03785-393-1), 560 pages, 2012,
US$207.00/€150.00 also available on CD (978-3-03795-215-3) and
eBook (978-3-03813-813-6)
Functional Nanocomposite Materials
Eds. Shuhui Yu, Rong Sun et al.
Materials Science Forum Vol. 722
In recent years, research and development has advanced greatly.
Materials made using nanoscale components add new functional
and structural properties: yielding nanocomposites and opening up
many applications. Such nanocomposites are of great importance for
a multitude of industrial uses and attract much research interest. This
special issue on Functional Nanocomposite Materials is a collection
of twelve papers whose contributors are at the Chinese University of
Hong Kong, the Hong Kong University of Science and Technology,
Tsinghua University, the University of Science and Technology of Beijing,
the Chinese Academy of Sciences Shenzhen Institute of Advanced
Technology, the Shenzhen Academy of Aerospace Technology, the King
Abdullah University of Science and Technology and Georgia Institute
of Technology. From these papers, readers can glean new research
ideas in nanocomposite materials, as well as sense the quality of the
work now going on; especially in the region of east Asia.
Available in print (978-3-03785-427-3), 110 pages, 2012,
US$138.00/€100.00 also available on CD (978-3-03795-246-7) and
eBook (978-3-03813-841-9)
Functional Nanomaterials and their Applications
Ed. Hardev Singh Virk
Solid State Phenomena Vol. 201
Functional nanomaterials are the basis of newly emerging
nanotechnologies for various device applications. Nanomaterials with
many kinds of morphologies and compositions have been extensively
investigated, and display various kinds of functionality in areas such
as electronic structure, optical effects, spin dynamics, and gas sensing.
Because of advanced characterization and new fabrication techniques,
nanomaterials are now central to multiple disciplines, including materials
science, chemistry, physics, engineering and medicine. This special
volume presents a detailed overview of recent research developments
on functional nanomaterials, including synthesis, characterization, and
applications.
Available in print (978-3-03785-700-7), 270 pages, 2013,
US$138.00/€100.00 also available on CD (978-3-03795-460-7) and
eBook (978-3-03826-081-3)
Functional Nanomaterials for Energy and
Environmental Applications
Eds. M.A. Shah, M. Amin Bhat et al.
Materials Science Forum Vol. 760
This special issue on the ‘Functional Nanomaterials for Energy and
Environmental Applications’ aims to assess the current status and
to identify future priority and directions in research, design and
applications for energy add environment. This special issue will provide
an opportunity and platform to promote mutual interaction, information
and collaborations on advanced functional materials.
Available in print (978-3-03785-722-9), 120 pages, 2013,
US$124.00/€90.00 also available on CD (978-3-03795-473-7) and
eBook (978-3-03826-103-2)
Fundamentals of Machine Design
Ed. Waldemar Karaszewski
Key Engineering Materials Vol. 490
A forum of researchers, educators and engineers involved in various
aspects of Machine Design provided the inspiration for this collection
of peer-reviewed papers. The resultant dissemination of the latest
research results, and the exchange of views concerning the future
research directions to be taken in this field will make the work of
immense value to all those having an interest in the topics covered.
The book reflects the cooperative efforts made in seeking out the best
strategies for effecting improvements in the quality and the reliability of
machines and machine parts and for extending their fields of application.
Available in print (978-3-03785-226-2), 348 pages, 2012,
US$207.00/€150.00 also available on CD (978-3-03795-051-7) and
eBook (978-3-03813-677-4)
Global Stone Congress
Eds. Luis Guerra Rosa et al.
Key Engineering Materials Vol. 548
The collection of peer reviewed papers on Stone covers several topics
and is conveniently divided into 6 chapters:- Resources, Exploration
and Exploitation- Manufacturing Processes, Tools and Optimization-
Environmental Management; Recycling and Valuation of Byproducts-
Characterization and New Products- Natural Stone in Architecture and
Design- Cultural, Economic and Social Issues.
Available in print (978-3-03785-653-6), 396 pages, 2013,
US$166.00/€120.00 also available on CD (978-3-03795-424-9) and
eBook (978-3-03826-034-9)
16 All titles now also available on CD and eBook, for details visit www.ttp.net
catalog-2013_bearbeitet.indd 16 16.09.2013 10:07:36