Fluton Valve India is a leading manufacturer of valves and coatings offering quality and cost-effective industrial PTFE lined ball valves, plug valve, diaphragm valve, flush bottom valave, FEP, PFA, PTFE and various other coatings and valve solutions to meet specific requirements of clients.
2. Introducing Coating And Valves
What is FEP Coating
•
FEP is a Fluorinated Ethylene Propylene
•
FEP coatings are extremely non-wetting and have a
very low coefficient of friction.
•
FEP coatings are often used in the food processing
industry.
3. What is PFA Coating ?
•
PFA offer similar properties to that of FEP but is
considered more of a premium resin.
•
PFA coatings share the useful properties of PTFE
as coefficient of friction and non reactivity but are
easily formable.
4. What is PEEK Coating ?
•
This is the only coating agent in the world that can
perform thin film processing(20-100μm) while keeping
the same PEEK resin performance.
•
This is a water based dispersion type, so it is
environment friendly.
5. What is PTFE Coating ?
•
The High Performance section of
Plastic
Coatings
applies
PTFE
coatings.
•
PTFE coating also known as Teflon
®, Xylan ®, Fluoroplastic or
Fluorocarbon coating, is normally
applied to components where a nonstick, dry lubricant or low friction
coating is required.
6. What is ETFE Coating ?
•
ETFE coatings provide excellent resistance to attacks
by chemicals and solvents that can cause rapid
deterioration of other plastics.
7. What is PVDF Coating ?
PVDF coating (polyvinylidene fluoride) is a chemical
resistant thick film barrier coating primarily used on
chemical processing equipment.
This coating is unaffected by most chemicals and
solvents and has excellent wear and abrasion
resistance.
8. What is ECTFE Coating ?
One of the most common types of
industrial coatings is ECTFE coatings,
which are sold under the Halar brand
name.
ECTFE is commonly used for primary
insulation and jacketing and in the
manufacture of gaskets which are
used for the storage of various
propellants used in the aerospace
industry, like liquid oxygen.
9. What is PTFE Lined Ball Valve ?
These valves are of very high quality construction with
the interior body, stem as well as the ball lined as an
individual component.
These valves are also protected from dangerous
elector-static discharge by anti static devices.
10. What is PTFE Lined Butterfly Valve ?
Butterfly Valve provides excellent chemical resistance
through the use of flouropolymer line body and disc.
11. What is PTFE Lined Flush Bottom Valve ?
PTFE Lined Flush Bottom Valves
that we provide have been
engineered for use in highly
corrosive liquid services.
This PTFE Lined Flush Bottom
Valve has a cast ductile iron body
with a flouropolymer lining that is
corrosion resistant.
12. What is PTFE Lined Plug Valve ?
PTFE Lined Plug Valves are lined with a noncorrosive polymer and are able to resist any type of
chemical at various temperatures.
Besides, the fluorocarbon lining is locked into the
valve body in a fully-lined valve.
13. What is PTFE Lined Check Valve (NRV) ?
PTFE Lined Check Valves (NRV)
are widely used for a number of
industrial purposes.
These PTFE Lined Check
Valves are better than other
conventional valves in terms of
functioning.
The PTFE Lined Check Valves,
provided by us, are light weight
and require no flange gaskets.
14. What is PTFE Lined Diaphragm Valve ?
PTFE Lined Diaphragm Valves are especially
engineered to match the tough work environment of
pharmaceuticals, corrosive industries, chemical
processing, etc.