Resume of QA QC-Welding Engineer with 5+ years of exp
SivakumarDhanapalan Resume@Inspector
1. Curriculum vitae
SIVAKUMAR . D E-mail id:
shiva_12b@yahoo.co.in
shivaaa83@gmail.com
More than 15 years’ of Experience in Inspection of Piping, Structural, Jack up Drilling Rigs,
Ship, Transportation Barges, Pontoons And other marine equipment’s related to oil &
gas works including , Pressure Testing, Operation, and Maintenance, with Exceptional
knowledge in Commissioning
Educational Qualification:
D.M.E [Diploma in Mechanical Engineering]
1st
class from Technical Board of Education and Training.
Additional Qualification:
CSWIP 3.1 Certificate
ASNT Level II – Non Destructive Testing
Penetrant Testing
Magnetic Particle Testing
Ultrasonic Testing
Radiographic Testing
RTFI (Reviewing film for shop fabricated and Field weld joints for CS and SS)
FAMILIAR WITH CODES
ASME sec V, sec VIII, Sec IX, ANSI/ASME B 31.3, ASME B 31.1
AWS-CWI, International standards & codes for constructions and Inspections
CAREER HIGHLIGHT
To be successful Power sector, Oil and Gas sector, Chemical professional by utilizing my
knowledge & skills to the best possible extent for the organization in an encouraging
environment
Experienced in Onshore and Offshore project for Oil & Gas and Marine industries
Trainings Undergone
General safety and basic firefighting course
Safety induction
Hot work procedure
Management programs for supervisors
PTW
TBOSIET
PROJECTS
2. Curriculum vitae
SIVAKUMAR . D E-mail id:
shiva_12b@yahoo.co.in
shivaaa83@gmail.com
Presently working in Doha Petroleum, DOPET as a Welding
Inspector & piping inspector
CLIENTS;-
• Qatar Petroleum ,
• Occidental Petroleum of Qatar Ltd.
• Raslaffan Liquefied Natural Gas Co.
• Maersk Oil Qatar,
• Dolphin Energy,
• Total E&P Qatar, Oryx GTL Limited,
• Qatar Fertilizer Company (QAFCO)
CLIENT APPROVEL AND WORKS INVOLVED EPC PROJECTS IN DOPET,
• QATAR RLOC PROJECT;-INSTALLATION OF NEW SOUR WATER PRE-FILTERS
AND FILTERS PROJECT AT RAS LAFFAN OLEFINS COMPANY LTD RLOC
QCHAMP CLIENT QATAR PROJECT DURATION 2 MONTH (01.03.2016 TO
23.05.2016 )
• QATAR RAS GAS PROJECT ;- FLARE ELIMINATION AT START UP OF TRAIN-
4/5 PROJECT NON SHUT DOWN WORK FOR TRAIN-5( RAS GAS , TRAIN 6,
QATAR CLIENT ) ( 01.11.2015 TO 28.02.2016)
• QATAR RAS GAS PROJECT;- MP STEAM HEADER REPLACEMENT STEAM LINE
PIPE 40”DIA MODIFICATION SHUT DOWN PROJECT ONE MONTH SHUT
DOWN (RAS GAS , TRAIN 6, QATAR CLIENT) From (05.10.2015 to 25.10.2015)
• QATAR TOTAL PROJECT;-;- PRODUCED WATER TREATMENT AND CRUDE
OIL DESALTING PROJECT AT HALUL OFFSHORE (CLIENT M/S TOTAL E & P
(02.05.2015 TO 27.09.2015)
• QATAR PETROLEUM PROJECT :- EPIC FOR INJECTION OF KHUFF GAS TO
ARAB-D GAS CAP USING NORTH FIELD INJUCTION STATION-PHASE 1
( QATAR PETROLEUM ) Shut Down Project From (05.04.2015 (to) 30.04.2015)
3. Curriculum vitae
SIVAKUMAR . D E-mail id:
shiva_12b@yahoo.co.in
shivaaa83@gmail.com
• CONSTRUCTION WORKS FOR (QATAR GAS)QG2 MECHANICAL TIE-
INS EARLY WORK FOR FLARE REDUCTION PROJECT (COLD TAPING
QATAR GAS) Shut Down Project From (01.03.2015 (to) 31.03.2015)
March 2012 – May 2013 Mechanical / Piping Inspector
Company: GS Engineering and Construction Co.Ltd
Clients: ABU DHAI Oil Refining Company (TAKREER)
Project: Ruwais Refinery Explanation.
August 2006 – May 2011 Piping and Structural Inspector
KEPPEL KAZAKHSTAN LLP, Aktau, Kazakhstan
Client: AGIP KCO (ENI Group)
Project: Caspian offshore Oil Exploration, Pre-Fabrication for Offshore-hook-Up and
Commission, Kazakhstan development experimental Program
Activities: Piping, Pipe Racks, Barges, Pontoons, Jack up, Platforms.
June 2005 – July 2006 QC Inspector
Veeson Energy System Private Limited
Clients: Bharat Heavy Electricals Limited, India
Project: Boiler, Water wall, Arrangement, Duct & damper, Shell, Feed Piping
Main Contractor: BHEL (Bharat Heavy Electricals Limited)
Client: NTPC (National Thermal Power Corporation)
April 2003 – April 2004 QC Inspector
Bharat Heavy Electricals Limited
Client : NTPC (National Thermal Power Corporation), India.
4. Curriculum vitae
SIVAKUMAR . D E-mail id:
shiva_12b@yahoo.co.in
shivaaa83@gmail.com
Projects: Bharath Heavy Electricals Ltd. (BHEL), Trichy, India – Fabrication of Heavy steel
structures.
Responsibilities:
• Identification of Raw materials and Review of Material Test Certificates
• Review Welding Procedure Specification, Procedure Qualification Record and Welder
Qualification Record, Welding Machine Certificate.
• Ensure welding consumables are procured in accordance with specification.
• Assist and provide training section for welder
• Conduct Welder Qualification Test and record the parameter’s and qualified upon Soundness of
weld by NDT and Mechanical Testing.
• Establish and Witness Mechanical testing for Plate and Pipe i.e., Tensile-test, Bend-test, Charpy-
test and Hardness test. Correlate test result with specification and corresponding codes and
standards.
• Ensure Joint-Configuration in accordance with corresponding WPS.
• Monitoring Pre-heating, Inter-pass temperature and Post-weld heat treatment & check proper
Pre-heating and Inter-pass temperature are maintained in accordance with WPS using
appropriate Thermo-chalk.
• Calculate heat input to ensure proper cooling rate, which may affect the mechanical properties
and metallurgical structure of the weld and heat-affected-zone.
• Provide technical guidance for welding sequence and distortion control.
• Carry out Stage-wise Visual inspection before welding, during welding, after welding and
dimension inspection as per Specification.
• Co-ordinates welding section and assist to solve technical problem.
Familiar with SMAW, GMAW, FCAW, SAW and TIG
NDE
• Review NDE procedure and ensure the procedure is implemented.
• Monitor NDE activities and evaluate the result in accordance with specification.
• Familiar with Liquid Penetrate Test, Magnetic Particle Test, Radiographic Testing and
Ultrasonic Testing.
• Perform and issue certification of new brands of Penetrant by (Quality and Sensitivity test).
• Ensure NDE equipment’s are calibrated.
• Ensure all NDE activities are performed in accordance with safety regulation.
• Review NDE reports.
Offshore Experience
5. Curriculum vitae
SIVAKUMAR . D E-mail id:
shiva_12b@yahoo.co.in
shivaaa83@gmail.com
• Fit up, dimensional inspection; weld visual inspection, heat treatment and NDT of piping,
storage tank, coded vessels and structural works.
• Interpretation of RT films.
• Witness of WQT’s and preparation of certificates.
• Carrying out and witness NDT activities PT, RT, MT, UT and preheat and post heat weld
treatment.
• Material inspection (plates, pipes, fittings, valves, welding consumables etc, ) verification of
MTC’s,
• Preparation of documents and getting approval from Third party and client.
• Involving in inspection of Painting of piping, storage tanks and structure.
• Familiar with ASME, API, & BS Code & standards.
• Witnessing of hydro test of vessels and piping as per ASME VIII, ASME 31.3.
• Attending weekly quality meetings with client and contractors, subcontractor’s quality
representative and solving project quality related problems.
• Proactively assisted team members, interacting positively to ensure timely, quality completion
of critical project’s within deadline.
• Assists & co-ordinate with welding engineering regards to PQR&WPQ Qualification.
• Evaluates and proposes welding methods to be used in order to maximize/eliminates weld
repair.
• Implementation of weld procedures & process.
• Monitors & Minimizes/eliminates weld repair
• Ensure equipment integrity and Internal & External Inspection of static equipment such as
vessels, heat exchangers, furnaces, Heaters, fin-fan coolers, steam boiler and process piping.
• Witness pressure test of equipment.
• Witness performance test of Pressure relieving Valves and Pressure vessel safety valves.
• To coordinate with NDT technicians and interpret results of testing.
• To participate in preparing inspection work packages / for plant shutdown and ensure effective
shutdown execution
• Pipeline laying and Riser Tie-in’s (including subsea tie-in spool installation)
Work also in GRE Glass reinforce Epoxy pipe line,
I am approved GRE/GRP Pipeline Inspector by(QATAR TOTAL PROJECT )
• Check Receiving inspection of GRE /GRP pipe and Fittings materials certificate & Test
Certificates
• GRE pipes, Bends, Nipple & coupling are handling & storage in yard properly.
• Visually inspect pipe outside. Checking pipe production lot, pressure ratings ensure with
material certificate.
6. Curriculum vitae
SIVAKUMAR . D E-mail id:
shiva_12b@yahoo.co.in
shivaaa83@gmail.com
• Inspecting Adhesive & Epoxy thread past expire date and all keep in proper packing with
appropriate temperature in storage area. Check that packing material list and materials
certificate.
• Maintaining incoming material inspection records.
• Check the qualification of bonder certificate
• Check the bonding surfaces preparation
• As per client specification check the adhesive applied end of the pipe pushed into the
bushing,
Fixed and then tempera.
PERSONAL DETAILS:
Name : D.Sivakumar
D.O.Birth : 05.12.1983
Nationality : Indian
Language : Hindi, Tamil, Malayalam, English, Russian
Father Name : Dhanapalan
New passport : L 7717347
Date of Expiry 04-03-2024
Qatar No : +97450087022
Residence No :+91-8270168011
Marital Status : Married
Nearest Airport : Trichy