2. • „CEMCOR Kork“ is a
natural cork sheet as
backing material
• „CEM 40 grey“ is a
mineral composite layer
with an embedded glass
fibre mat
• „CEM 50 black“ is a
mineral top coat that is
electrically conductive
3. Surface preparation:
The walls, the concrete
and steel surfaces must
be free of oil, grease,
paint, coatings and any
loose separating
substances.
octopus coating GmbH 3
4. Application of
“CEMCOR Kork” and
“CEM 40 grey” to
vertical surfaces
octopus coating GmbH 4
5. Application of the
natural cork sheets
to the wall by
hammering
octopus coating GmbH 5
6. Spread levelling grit
on uneven surfaces
for subsequent
installation of the
cork sheets
"CEMCOR"
octopus coating GmbH 6
7. Flattening and
levelling of the grit
octopus coating GmbH 7
8. Coating of the cork
sheets on the wall
with CEM 40 grey
octopus coating GmbH 8
9. Paint the edges of
the sheets with CEM
40 grey before the
installation of the
cork sheets
octopus coating GmbH 9
10. Place the cork
sheets on the grit
and push them to the
wall
octopus coating GmbH 10
11. Paint the edges and
joints with CEM 40
grey
octopus coating GmbH 11