CENTRAL PHILIPS

1. Connected To: 192.168.1.3 - 1-23
+++ 0055-3333-0810-0001 2010-05-18 +2+ 15:37+ #0030 VDU010 >
<dinars:0,21
DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server,
U=Unit
DESTINATION
TREE CODE ANALYSIS RESULT NUMBER ID NUMBER
0 21 Trunk access code 0 D 0
0 21 Trunk access code *3 D 49
0 21 Trunk access code *6 D 48
0 21 Trunk access code *7 D 48
0 21 Trunk access code *852 D 26
0 21 Trunk access code *855 D 24
0 21 Trunk access code *887 D 8
0 21 Trunk access code *888 D 17
0 21 Trunk access code *889 D 18
EXECUTED
<didest:49
DEST TREE FST-DT SND-DT ACC-REP ROUTE-TABLE DELAY-SEIZURE NUMB-PLAN
49 - 0 0 - - D 0 -
EXECUTED
<didest:48
DEST TREE FST-DT SND-DT ACC-REP ROUTE-TABLE DELAY-SEIZURE NUMB-PLAN
48 18 1 0 0 48 D 0 0
EXECUTED
<dinars:19
Error 8: Non existing value of parameter 1
REJECTED
<dinars:0,21
DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server,
U=Unit
DESTINATION
TREE CODE ANALYSIS RESULT NUMBER ID NUMBER
0 21 Trunk access code 0 D 0
0 21 Trunk access code *3 D 49
0 21 Trunk access code *6 D 48
0 21 Trunk access code *7 D 48
0 21 Trunk access code *852 D 26
0 21 Trunk access code *855 D 24
0 21 Trunk access code *887 D 8
0 21 Trunk access code *888 D 17
0 21 Trunk access code *889 D 18
EXECUTED
<didest:49
DEST TREE FST-DT SND-DT ACC-REP ROUTE-TABLE DELAY-SEIZURE NUMB-PLAN
49 19 1 0 0 49 D 0 0
EXECUTED
<dinars:19;
Error 8: Non existing value of parameter 1
REJECTED
<dirota:49
ROUTE-TABLE UNIT SEQUENCE-TABLE
49 1 1
NORMAL EXTENSION OPERATOR PRIORITY EXTENSION
ROUTE PREF TRFC SMART ROUTE PREF TRFC SMART ROUTE PREF TRFC SMART

2. - - - - - - - - 9 p 1 No
EXECUTED
<chrota:?
Change route table
CHROTA: <ROUTE-TABLE>[,[<USER-TYPE>][,<SEQ-TABLE/ZONE>][,<UNIT>]];
When USER-TYPE is omitted, all user types will be adapted.
When SEQUENCE-TABLE is omitted, 1 will be assumed.
By means of additional parameters the route table data is to be given.
<chrota:49,?
USER-TYPE : User type code (0..2)
0 = normal extension
1 = operator
2 = priority extension
<chrota:49
Enter route table data <ROUTE>,<PREF-CODE>,<TRFC>[,<SMART-BOX-EM>]: ^X
Message 222: Command aborted
<dirout:9
ROUTE UNIT BSPT GEN-OPTS GEN-TONE CV CC-TABLE
9 1 - 000000000000000 222222 0 -
INC-OPTS TONE-AND-DDI-OPTS TREE A-QUEUE OVE SCNE
00000000000 000000000 - 16 - -
OUT-OPTS ATF
100000 0
NO INCOMING DIGIT CONV. ON THIS ROUTE (USE DIDGCO FOR OUTGOING DIGIT CONV.)
SEQ BUNDLE
0 49
EXECUTED
<dibndl:49
BUNDLE BSPT ROUTE UNIT DIR-AND-NEG OPTIONS CON-AND-SIG-TYPE ALL-CALLS
49 - 9 1 0 - 0000100000000000 0 0 -
NO LINES ASSIGNED TO THIS BUNDLE
EXECUTED
<dinars:0,21
DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server,
U=Unit
DESTINATION
TREE CODE ANALYSIS RESULT NUMBER ID NUMBER
0 21 Trunk access code 0 D 0
0 21 Trunk access code *3 D 49
0 21 Trunk access code *6 D 48
0 21 Trunk access code *7 D 48
0 21 Trunk access code *852 D 26
0 21 Trunk access code *855 D 24
0 21 Trunk access code *887 D 8
0 21 Trunk access code *888 D 17
0 21 Trunk access code *889 D 18
EXECUTED
<didest:49
DEST TREE FST-DT SND-DT ACC-REP ROUTE-TABLE DELAY-SEIZURE NUMB-PLAN
49 19 1 0 0 49 D 0 0
EXECUTED

3. <dinars:19
Error 8: Non existing value of parameter 1
REJECTED
<dirout:9
ROUTE UNIT BSPT GEN-OPTS GEN-TONE CV CC-TABLE
9 1 - 000000000000000 222222 0 -
INC-OPTS TONE-AND-DDI-OPTS TREE A-QUEUE OVE SCNE
00000000000 000000000 - 16 - -
OUT-OPTS ATF
100000 0
NO INCOMING DIGIT CONV. ON THIS ROUTE (USE DIDGCO FOR OUTGOING DIGIT CONV.)
SEQ BUNDLE
0 49
EXECUTED
<chrtcg:?
Change route characteristics general
CHRTCG: <ROUTE>,<GEN-OPTS>,<GEN-TONE>[,[<CV>][,[<BSPT>][,<CC-TABLE-NR>]]];
If CV is omitted, the projected default value is assumed.
<dirout:8
ROUTE UNIT BSPT GEN-OPTS GEN-TONE CV CC-TABLE
8 1 - 011111101110110 441444 0 -
INC-OPTS TONE-AND-DDI-OPTS TREE A-QUEUE OVE SCNE
10100000000 114699999 81 16 - -
OUT-OPTS ATF
001000 0
NO INCOMING DIGIT CONV. ON THIS ROUTE (USE DIDGCO FOR OUTGOING DIGIT CONV.)
SEQ BUNDLE
0 8
EXECUTED
<chrtcg?
Error 212: Question mark at illegal position
REJECTED
<chrtcg:?
Change route characteristics general
CHRTCG: <ROUTE>,<GEN-OPTS>,<GEN-TONE>[,[<CV>][,[<BSPT>][,<CC-TABLE-NR>]]];
If CV is omitted, the projected default value is assumed.
<chrtcg:9,?
GEN-OPTS: General route options. Format: PQRSTUVWXYZ[A[B[C[D]]]]
(For all options: 0 = No, 1 = Yes)
P = data protection applied X = time-break check
Q = assistance required Y = time-break enabled
R = add-on allowed Z = CNND translation
S = toll-ticketing on route A = Network priority/Force release possible
T = impulse post dialling allowed B = line park allowed
U = keytone post dialling allowed C = QSIG segmenting allowed
V = enquiry on trunk allowed D = Closed number scheme presentation
W = flexible operator assistance available
<chrtcg:9,011111101110110,?

4. GEN-TONE: General route tone types. Format: PQRSTU
P = tone type before answer (2..5)
Q = tone type after answer (2..5)
R = tone type during hold conditions (0..3)
S = tone type for COB before answer (0..6)
T = tone type for COB after answer (0..6)
U = tone for special recall of operator (0..5)
Tone types are:
0 = moh or no tone 4 = internal ring back tone
1 = moh or waiting tone 5 = external ring back tone
2 = no tone 6 = busy tone
3 = waiting tone
<chrtci:?
Change route characteristics incoming
CHRTCI: <ROUTE>,<INC-OPTS>,<TONE-AND-DDI-OPTS>[,[<TREE>][,[<A-QUEUE>]
[,<BSPT>]]];
When <INC-OPTS> 'DDI-traffic on route' = Yes, then <TREE> is required.
<chrtci:9,?
INC-OPTS: Options for incoming traffic. Format: PQRSTUV[WXYZ] (0 = No, 1 = Yes)
P = DDI-traffic on route
Q = Break-in protection
R = Transit allowed
S = Malicious Call Trace allowed
T = Announcement allowed
U = Answer before announcement
V = Calling party control
W = DDI-delay time required (omit if P = No)
X = DDI-barred check on inc. calls (omit if P = No)
Y = DDI-call waiting required (omit if P = No)
Z = Socotel shortened protocol (omit if P = No)
<chrtci:9,10100000000,?
TONE-AND-DDI-OPTS: Incoming tone types and DDI characteristics.
Format: PQ[RSTUVWX]
P = busy tone before answer for release (0 = No, 1 = Yes)
Q = busy tone after answer for release (0 = No, 1 = Yes)
R = DDI dial tone to be sent to external (0..4)
S = Traffic class (0..7)
T = Action when DDI to busy extension (0..9)
U = Action when DDI dial time out (0..9)
V = Action when DDI ringing time out (0..9)
W = Action when DDI to unallocated number (0..9)
X = Action when unsuccessful DDI call (0..9)
DDI dial tone 0..4 is (parameter R):
0 = no tone 2 = external dial tone 4 = external ring tone
1 = internal dial tone 3 = internal ring tone
Actions 0..9 are (parameters T..X):
0 = busy tone 4 = cob and send answer 8 = op. or no act.
1 = nu tone 5 = op. or busy tone 9 = operator or night extension
2 = clear backward 6 = op. or nu tone
3 = no action 7 = op. or clr back
<chrtci:9,10100000000,114699999,81
EXECUTED
<dinars:81
DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server,
U=Unit
DESTINATION
TREE CODE ANALYSIS RESULT NUMBER ID NUMBER
81 10 Internal number 2 D -
81 10 Internal number 3 D -
81 91 Network access code 403 D 21

5. 81 132 PVN user channel address 4998 U 1
81 132 PVN user channel address 4999 U 1
EXECUTED
<chrtco:?
Change route characteristics outgoing
CHRTCO: <ROUTE>,<OUT-OPTS>,<ATF>[,<BSPT>];
<chrtco:9,?
OUT-OPTS: Outgoing route options. Format PQRST[U] (0 = No, 1 = Yes)
P = Direct switch through
Q = Break-in protection on outgoing calls
R = D-button allowed
S = Transit allowed
T = Source identification
U = Insert or append close sign
<chrtco:9,001000,?
ATF: Automatic trunk find (0..2)
0 = no ATF
1 = ATF by camp on busy
2 = ATF by automatic ring back
<chrtco:9,001000,0
EXECUTED
<dirout:9
ROUTE UNIT BSPT GEN-OPTS GEN-TONE CV CC-TABLE
9 1 - 011111101110110 441444 0 -
INC-OPTS TONE-AND-DDI-OPTS TREE A-QUEUE OVE SCNE
10100000000 114699999 81 16 - -
OUT-OPTS ATF
001000 0
NO INCOMING DIGIT CONV. ON THIS ROUTE (USE DIDGCO FOR OUTGOING DIGIT CONV.)
SEQ BUNDLE
0 49
EXECUTED
<dibndl:49
BUNDLE BSPT ROUTE UNIT DIR-AND-NEG OPTIONS CON-AND-SIG-TYPE ALL-CALLS
49 - 9 1 0 - 0000100000000000 0 0 -
NO LINES ASSIGNED TO THIS BUNDLE
EXECUTED
<asbndl:?
Assign bundle to route
ASBNDL: <ROUTE>,<BUNDLE>;
<chbndc:?
Change bundle characteristics
CHBNDC: <UNIT+BUNDLE>,<DIR-AND-NEG>,<OPTIONS>,<CON-AND-SIG-TYPE>
[,[<ALL-CALLS>][,<BSPT>]];
If ALL-CALLS is omitted no maximum to the number of allowed calls for the
bundle will be applied.
<chbndc:49,?
DIR-AND-NEG: Bundle direction and negotiation rule. Format P[Q]
P = bundle direction (0..2):
0 = incoming, 1 = outgoing, 2 = both way

6. Q = ISDN or QSIG negotiation rule (0..2):
Should be omitted when the bundle signalling type is non-ISDN and non-QSIG.
For ISDN:
0 = any B-channel, 1 = exclusive B-channel, 2 = preferred B-channel
For QSIG:
1 = exclusive B-channel, 2 = preferred B-channel
<chbndc:49,22,0000100000000000,?
CON-AND-SIG-TYPE: Bundle connection and signalling type. Format PQ.
P = connection type (0..5):
0 = four wire tie line 1 = two wire pstn line 2 = two wire tie line
3 = digital pstn line 4 = digital tie line 5 = virtual connection
Q = signalling type (0..22)
INCOMING OUTGOING INCOMING OUTGOING
0 = Impulse Impulse 1 = Impulse/KT sensitive Impulse
2 = Keytone Keytone 3 = MFC-R2 Keytone
4 = KeytoneCli KeytoneCli 5 = Keytone after answer Keytone
6 = DPNSS-x DPNSS-x 7 = DPNSS-y DPNSS-y
8 = MFP MFP 9 = MF-socotel MF-socotel
10 = DASS DASS 11 = MFE MFE
12 = Not used Not used 13 = MFC-CSS1 MFC-CSS1
14 = ISDN-a ISDN-a 15 = ISDN-b ISDN-b
16 = DPNSS-PVN DPNSS-PVN 17 = DPNSS-x DPNSS-VM-x
18 = DPNSS-y DPNSS-VM-y 19 = Virtual lines Virtual lines
20 = QSIG-a QSIG-a 21 = QSIG-b QSIG-b
22 = QSIG-PVN QSIG-PVN 23 = CCIS CCIS
24 = SIP_TRK SIP_TRK
<chbndc:49,22,0000100000000000,420
EXECUTED
<dibndl:49
BUNDLE BSPT ROUTE UNIT DIR-AND-NEG OPTIONS CON-AND-SIG-TYPE ALL-CALLS
49 - 9 1 2 2 0000100000000000 4 20 -
NO LINES ASSIGNED TO THIS BUNDLE
EXECUTED
<asline:?
Assign line to bundle
ASLINE: <BUNDLE>,<LINE>,<SHELF>,<BRD>,<CRT>[,<B-CHANNEL>];
If B-CHANNEL is omitted and the EHWA identifies an ISDN trunk circuit then all
B-channels of that circuit are assigned to the bundle.
<asline:49,0015,11,9,0,16
Error 6: Parameter 6 out of range
REJECTED
<177
Error 219: No colon at position 7 encountered
REJECTED
<asline:49,0017,11,9,0,17
EXECUTED
<dibndl:49
BUNDLE BSPT ROUTE UNIT DIR-AND-NEG OPTIONS CON-AND-SIG-TYPE ALL-CALLS
49 - 9 1 2 2 0000100000000000 4 20 -
SEQ SHELF BRD CRT B-CH LINE
0 11 9 0 12 0012
1 11 9 0 13 0013
2 11 9 0 14 0014
3 11 9 0 15 0015
4 11 9 0 17 0017
Access shared by multiple bundles
EXECUTED

7. <diserv:11,9,0,12&&17
SHELF BRD CRT B-CH B-CH-STATUS
11 9 0 12 free
11 9 0 13 free
11 9 0 14 free
11 9 0 15 free
11 9 0 17 free
EXECUTED