This is slide where we discuss the common mistake of a new reloader.

1. By: www.reloadingpresso.com

2. Reloading ammos has been a common hobby for most people who are
into shooting, most of the time they find it more practical to do so and felt
that they are in control since reloading your own ammos can give you the
freedom to choose different types of brands, tools and ingredients.
While some people might already be doing this for a longer time, some are
just new to the reloading process, and while they may seem too far from
each other, considering the expertise, there are still some mistakes that
can happen.
Reloading is supposed to be simple yet it could also have too many details
depending on the reloading press type that you’re using, from the simplest
single stage press to the progressive reloading presses that operates on
different stages at the same time.
And to further look at these common errors, here are the most common
reloading mistakes that you might want to avoid while working on your
ammos.

3. In reloading, used cases are usually recycled after shooting, while it may
sound economical for most; this is also where the danger comes in if they
don’t get inspected properly. Cases that have cracks or even slight dents
may have a huge effect when fired, not only they are less accurate, but
may also cause danger to the shooter.

4. There are times when a bullet may have the wrong amount of powder being
charged, this is why it is very important to check them always before seating
the bullet. Some reloading kits have automatic powder
measurement especially with the progressive type, getting one for your own
use will help you eliminate this kind of problem.
Included on most reloading presses are reloading manuals that includes
prescribed amount of powder to be used for each type of caliber you are
working on. Following these instructions promotes safety when firing your
guns.

5.  Inadequate seating: When the primers are not rightfully seated
on the primer pocket, this maycause some dangers since they will
be more sensitive to impact. Making sure that your primers are
properly placed in its position will give you accurate shooting.
 Too much seating: This is another important thing that must
be avoided. If the primer was pushed deeper than usual, this can
also cause dangers to the shooter. When in the process of placing
primers with your press, you must know when you have already
put enough pressure for it to seat properly on the primer pocket.

6. Cases need to be trimmed all the time to ensure proper usage
and action. One of the most common mistakes is using the wrong
size of case that leads to missed targets

7. To have accurate and well-made ammos, you must make sure that your bullets
are placed in the right manner on the mouth of the case. For most reloaders,
guiding your bullet before it reaches the die has been a practice. To double
check, having a good feel on your ready-made bullets is recommended.

8. Crimping is where you secure your bullets in the place that it won’t make
any movements. However, there are times that crimping is done
excessively, having a separate bullet seating and crimping process is
recommended.

9. On the other hand, bullets that are not properly crimped may cause
you some problems as it can leadto some troubles in your cartridge
case

10. Reloading is a great experience especially if you love the process of doing it plus
the benefit of saving compared to buying readymade bullets. However, in this case,
there are so many thing that you would like to carefully understand and learn in
order to avoid common mistakes that might lead you to danger. Getting a good
reloading handbook that includes complete information on reloading activities is
advised.
Investing on good reloading press equipment also saves you a lot of trouble and
errors in reloading your ammos; most of the time, these machines would include
accessories that will help you measure your components and the bullet itself. You
might also want to check on some help videos to further understand how the
reloading press works since they come in different types to help you choose the
best fit according to your needs.

11. Thank You
Get More Information on Reloading Press Tips.
Bought To You By
ReloadingPresso.com