1. Product Work Log
Name___Tamra Summers__________________________________________________ Date
___________08/20/11_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
August 20,2011 Research for project
3:00pm-3:30pm This is going to be cool
because I love
working on cars.
Commentary:
My project facilitator and I researched
ideas for my senior project. My dad
actually came up with the idea of
restoring a hood because he had a extra
hood.

2. Name___Tamra Summers__________________________________________________ Date
___________08/28/11_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
August 28,2011 Sand on the hood
4:00pm-5:30pm This was a long tiring
process. My arms are
really sore.
Commentary:
Today I got the hood outside to start
sanding. The sanding process is to take
the red paint off and smooth down
rough patches.

3. Name___Tamra Summers__________________________________________________ Date
___________09/3/11_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
September 3,2011
1:00pm-1:30pm Search for hood scoop There was so many to
choose from. My
facilitator and I finally
Commentary: found the perfect one.
I searched the internet for a hood scoop
to go on the hood. I paid $170 for a cal
induction hood. This gives the car a
racing look.

4. Name___Tamra Summers__________________________________________________ Date
___________09/11/11_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
September 11,2011
12:00pm-1:45pm Learn about welding and practice Welding is very
difficult and takes a
steady hand. It is also
Commentary: very dangerous and
requires much
Today I learned about the welder. I got attention for my
the hood scoop but the hole in the hood safety.
was too big. So I needed to weld metal
around the edges so the scoop can fit. I
learned about the safety today and
practiced a little.

5. Name___Tamra Summers__________________________________________________ Date
___________09/24/11_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
September 24,2011 Welding Day!!
3:00pm-4:15pm It was time consuming
and made me very
nervous because I
Commentary: didn’t want to mess
everything up.
Today I weld the metal to the hood.
After all the practice my weld turned
out good. After the weld is done I let it
dry for a few days.

6. Name___Tamra Summers__________________________________________________ Date
___________10/8/11_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
October 8,2011 More sanding
5:00pm-6:30pm Very Very Tiring!!!!
Next time take breaks.
Commentary:
Today I sand down the weld to make it
smooth. Since I am sanding the weld it
requires a really tough grid of sand
paper. I use the sand grinder to help
speed up the process.

7. Name___Tamra Summers__________________________________________________ Date
___________10/22/11_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
October 22,2011 Bondo cracks and dips Mixing the bondo was
2:00pm-3:00pm fun.
I will have to use the
Commentary: bondo more than once
just like sanding.
After the weld is smooth I go around it Doing a hood requires
with some bondo. Bondo is body filler. lots of sanding.
I also go all over the hood where there
are dents or cracks. After I finish I must
let it air dry for a few days.

8. Name___Tamra Summers__________________________________________________ Date
___________10/30/11_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
October 30,2011
3:00pm-4:00pm Sand The hood more Sooo tired of sanding.
Commentary:
After the body filler has had plenty of
time to dry I now go to sand it down so
it is smooth.

9. Name___Tamra Summers__________________________________________________ Date
___________02/4/12_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
February 4 ,2011 Wet sand then primer
1:00pm-3:00pm Everything was going
too good.
A problem was bound
Commentary: to happen.
Today I spray primer and wet sand
because it’s warmer now. I use a low
grid. I squirt water on the hood and
hood scoop then sand. This is the final
step of sanding. I place the scoop in the
hood but found a problem. It doesn’t
sit even on the hood.

10. Name___Tamra Summers__________________________________________________ Date
___________02/11/12_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
February 11,2011
1:00pm-3:30pm Fix the hood scoop to fit the hood The longest process
ever, but had to be
done so it would fit
Commentary: perfect.
To make the scoop sit level on the
hood I had to use body filler to add to
the edges. By adding the bondo a little
at a time it makes it thinker therefore
sitting on the hood perfectly without
any gaps.

11. Name___Tamra Summers__________________________________________________ Date
___________02/25/12_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
February 25,2011
2:00pm-3:00pm Sand down the scoop then primer It wasn’t too bad
sanding.
Commentary:
From the bondo on the edges I had
resand the scoop. Then wet sand it
again. After I finish I do one more coat
of primer on the hood and scoop. Then
drilled holes for the scoop to be bolted
on the hood.

12. Name___Tamra Summers__________________________________________________ Date
___________03/3/12_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
March 3,2011
12:00pm-1:00pm Research for paint Boy am I lucky I have
my dad to save my
project.
Commentary:
Today I searched for colors to paint the
hood, but found out I can’t paint unless
it’s 70 degrees or hotter. In march it’s
not quiet hot enough and don’t have
time to wait till hotter weather. My dad
gave me the idea to wrap it. It’s one big
design that covers the hood and scoop
that sticks on like a sticker.

13. Name___Tamra Summers__________________________________________________ Date
___________03/6/12_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
March 6,2011
3:00pm-3:30pm Research for a design
Commentary:
I asked my dad what design he would
want on the hood because I want to
put the hood on his car. He wanted a
reaper. So I searched everywhere for
the perfect picture. After I found it I
sent it to AAA Digital Imaging to do
the sticker. The company is giving me a
great deal.

14. Name___Tamra Summers__________________________________________________ Date
___________03/10/12_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
March 10,2011
1:00pm-3:50pm Put the sticker on This was really hard. I
had to place the
sticker on without
Commentary: having any bubbles.
One wrong move and
it could have been a
I drove to AAA Digital imaging to help disaster.
place the sticker on. Since they were
professionals I needed some assistance.
We wrapped the scoop first. It was
hard getting the sticker to go along
with the curves. Then we did the hood
last.

15. Name___Tamra Summers__________________________________________________ Date
___________03/11/12_____
Product __Restore Mustang Hood
_____________________________________________________________________
Date/Time: Activity: Comment/Suggestions:
March 11,2011
4:00pm-4:30pm Place the hood on the car I am very proud of
myself for not only
completing my project
Commentary: because it turned out
really good. I barley
needed any help from
After all my hard work of restoring a my facilitator because
old hood it looks like new. With the I have learned over
custom look from the sticker it gives the years from my
the car a great look. My facilitator dad. Over all I had a
helped me bolt down the hood. I am great time restoring
now ready to present my senior the hood for the
project. benefit of my dad.