MASTERCAM X5 SURFACE POCKET PROGRAM

1. 1. Master cam 3d programming Surface rough pocket window will come
1.
1. Surface rough pocket
2. Create 3d model
3. Save model
4. Go to machine type - mill – default
5. Got to tool path- surface rough – pocket -ok
6. Enter nc name ( pocket)
7. Select drive surface – select work piece
8. Check containment –chain selection –ok
9. Entry point – ok
10. Select tool from library -( exmp- 10 end mill , 20 end mill )
11. Go to surface parameter – clearance , retract , feed plane give required value
12. Rough parameter – give stpdown value ( 0.2, 0.5 , 1 ) mm
13. Check pocketing parameter
14. Program will be generate automatically
15. Ok
2. Check program
1. Go to operation manager –tool path - Select program –go to back plot selected operation -
check tool , holder , work piece – then play