Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
1. TIC insert Liners-double the service life
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small
adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a
whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear
effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
2. One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. C130 JAW PLATE QUARRY TYPE ONE PIECE
Material: Mn22%Cr2%Mo0.5% with TIC Insert
Fixed one piece Jaw Plate: MM1086204 (175mm + 50mm) 3628 kg/pcs
Swing one piece Jaw Plate: MM1031742 (150mm+25mm) 3053kg/pcs
Application: Perth Iron Mine, Australia
Use feedback: 256% longer service life than OME liner
If you want to get a longer service life of the liner, please contact me sales@bogvik.com
193. MM0383784 MM0383784 CONCAVE SEGMENT MIDDLE TIER DOUBLE@ SG6089
MM1381973 MM1381973 CONCAVE SGMNT LOW TIER 1 WCI M TO M@
FLS60-
89
MM1385333 MM1385333 CONCAVE CONCAVE BOTTOM SUPPORTED@ MH800
HP500/HP6/
OMNI etc
MM1385335 MM1385335 MANTLE SPECIAL MH800@ MH800
HP500/HP6/
OMNI etc
106666330
2
110666633
02
MANTLE SPECIAL SH@
MM1382005 MM1382005 MANTLE UPR@
104830974
1
48309741 BOWL LINER 7'
MM1424184 MM1424184 BOWL LINER STD F SPECIAL@
MM1424185 MM1424185 MANTLE STD F SPECIAL@
MM1359213 MM1359213 BOWL LINER SPECIAL F OS@
MM1359214 MM1359214 MANTLE SPECIAL F OS@
194. 705530850
7
770553085
06
MANTLE SH EF@
MM1174346 MM1174346 MANTLE F/M
MM1252691 MM1252691 BOWL LINER C
MM1252699 MM1252699 MANTLE C/EC
MM1278801 MM1278801 BOWL LINER M
MM1382002 MM1382002 MANTLE LOW
705520850
9
102807580
XX
BOWL LINER SH EF@
MM1275243
-019
MM1275243
-401
MANTLE LOW OS 2PC PART CORG 88 RBD
MM1275244
-019
MM1275244
-401
MANTLE LOW DBL OS 2PC PART CORG 90 RBD
104830469
8
110483046
99
BOWL LINER SY41/4ST, MEDIUM, XT710, 1040 1066665650
104830182 110483018 Bowl Liner
195. 8 28
106666569
5
110483073
78
BOWL LINER
Share pattern
with 1048307378
17-A40-
190-001
17-A40-
190
MANTLE UPPER
Share pattern
with 17-A40-190-005
MM1420210 MM1420210 MANTLE
MM1420224 MM1420224 BOWL LINER
105013740
1
710501374
01
Mantle
Share pattern
with MM0303025
TEREX CEDARAPIDS
Mantle STD 02-360-022-0003
Liner STD - C 02-360-023-0010
Liner STD - M 02-360-386-0010
Mantle FH - C 02-360-363-7001
Liner FH- C 02-360-364-7000
TEREX CEDARAPIDS EL JAY ROLLERCONE RC45 CLASSIC
196. Mantle 02-450-022-0004
Liner C 02-450-023-0010
Liner MF 02-450-386-0000
Mantle 02-450-527-8000
Liner F 02-450-530-8000
Liner EF 02-450-531-8000
Upper Radial 02-459-021-0001
Lower Radial 02-450-021-0001
Upper Thrust 02-450-155-7000
Lower Thrust 02-450-156-0000
Cap Mantle Nut 02450-015-000
Nut Mantle Hold Down 02450-014-0522
Washer Mantle Hold Down 02450-016-0520
Ring Sponge, Rubber 02-540-496-7000
Protector, Mantle Hold Down 02-450-015-0000
Capscrew, 1-1/4" NC X 2-1/2" 7025-186
Nut, Mantle Hold Down 02-450-014-0522
Locking key 41003-001-13
Washer, Mantle Hold Down 02-450-016-0520
O-Ring 00-420-002-4330
Seal Ring, upper 02-450-007-0001
Seal kit 02-450-470-0010
203. Rubber
Oring 6227-60 00-420-002-4330
Hopper MVP 380X 04800-302-84
Wedge Plate Lower
Seal
04800-300-10
Wedge Plate Upper
Seal
04800-300-12
Band Seal 04800-300-40
Head Seal 04800-300-13
Head Seal 05800-300-13
Main Frame Seal 04800-300-11
TEREX CEDARAPIDS MVP-450 & MVP-450X
Mantle STD 05400-300-20
Liner C 05400-300-15
Liner M 05400-300-16
Liner MF 05400-300-17
Mantle F 05400-300-21
Liner F 05400-300-18
Liner XF 05400-300-19
Mantle MC 05400-300-20-01
Upper Radial Bearing 02-540-021-0010
Lower Radial Bearing 02-540-077-0000
Lower Thrust Bearing 02-540-156-0000
204. TEREX CEDARAPIDS MVP-550 & MVP-550X
Mantle STD 06000-300-01
Liner C 06000-300-03
Liner M 06000-300-04
Liner MF 06000-300-05
Mantle F 06000-300-02
Liner F 06000-300-06
Liner XF 06000-300-07
Mantle MC 06000-300-01-01
Mccloskey Jaw Crusher Parts
Modle DESCRIPTION McCLOSKEY OEM NO.
J50 Moving Jaw 501-016-002
J50 Cheek plate 501-016-041
J50 Cheek plate 501-016-042
J50 Cheek plate 501-016-043
J50 Cheek plate 501-016-044