4월 24일 인더스트리솔루션이 개최했던 "AIDC/SCM SOLUTIONS FAIR 2014" 세미나 발표자료입니다. 주제 : 매직스트랩(Magic Strap)의 적용사례 발표자 : 한국무라타전자 송용준

1. Title 1
MAGICSTRAP®
Passive RFID technology
1
RFID Project
Technology Integrated Products Dept
New Business Development Group
Apr. 2014

2. What is
MAGICSTRAP® ?
2

3. ２ focused use case of MAGICSTRAP®
PCB traceability Small goods management
http://www.murata.com/products/rfid/pickup/index.html

4. 4
Turn your PCB into RFID tag.

5. ～From cradle to grave～
Track & trace PCB with RFID technology throughout the life-
cycle of electronic products.
5Confidential
Key concept of MAGICSTRAP® for PCB

6. 6

7. 7
Read range through plastic case
Note: Read range is expected under 2W ERP
condition from linear polarized antenna at 865MHz.
1.2m
X Z Y
1.2m
n/a0.9m
0.1m
1.4m
on PCB
No need to
disassemble !

8. 8
Use Case

9. 9
http://www.murata.com/products/rfid/tw/pdf/Magicstrap_RFID_Use_Case_Systronik_1_1.pdf
Improved production efficiency
by 80%
Early adopter of MAGICSTRAP®

10. 10Confidential
Mount
Reflow
Test Assembly
Test
Packaging
Real time monitoring
Cisco-Jabil
Manager
End customer
Lean WIP management
Remote monitoring(Transparency)
Item level traceability(Process parameters)
RFID is much
more efficient
than scanning
a bar code.
Jabil has improved its efficiency by approximately 80 percent

11. 11Confidential
Schneider
PCB identification: Laser marking
PCB Assembly and test: Sticker
Final Assembly test: HF RFID Tag
Laser:
Expensive
Slow
2D matrix code sticker:
High definition cameras
Manual work (attachment)
Need to be always located at the
same area to be read in line.
Inefficient
HF RFID tag:
Manual work
(attachment and removing)
Only MAGICSTRAP®

12. 12Confidential
Cerler
Whole box reading and automatic delivery note generation
Application: Shipment management system
Antenna
Antenna

13. 13Confidential
RFID
Reader/Writer
Before
Application: Calibration Data Management
Easy connection between Device and configuration
After
Config data: From Network analyzer (Auto)
Serial number : Input by manual.
Config data: From Network analyzer (Auto)
Serial number : From RFID (Auto)
RFID make data input process more efficient and
able to avoid data entry trouble.
SYSTRONIK
Manual input Automatically input by RFID

14. 14
Before
After
Printed Serial
Number on sticker
SYSTRONIK

15. 15
Collaboration at IPC, Electronica …
IPC Apex Expo 2013, San Diego, USA
Electronica 2012, Munich, Germany
Partners
The 2013 New Product
Introduction (NPI) Award for in the
labeling equipment from the
magazine of Circuits Assembly.

16. 16
Collaboration with Partner
PCB Embedded RFID
Benefits
Save space:
Takes up less space on the PCB than barcodes or dot matrix codes.
Versatile:
No optical contact necessary: reads through enclosures and packaging.

17. 17
Shipping Process
Before (Bar-code)
Operator input serial number by manually.
It spend much time and sometimes happen human error.
After (RFID)
Multiple reading serial number.Operator can generate shipment slip by
automatically to avoid human error and enjoy efficient working.

18. 18
Slip A
Slip B
Ship Date
Assy Date
Ship Date
Assy Date
Receiving Process
・Faster read rate.
・Multiple detection.
・Storage data
・Read and Write
・High Level Traceability
<Bar-code>
・Scan one by one
・Human error
・Incorrect paste
・If many PCB,,,,

19. Read / Write
19Confidential
No stop action
Multiple reading
Storage data
Long read range
No visibility
Bar code RFID
Benefit of “RFID”
RFID is capable of advancing your product and factory.

20. 20
- PCB for Service Part
PCB Inventory Management
PCB (1) PCB (3)PCB (2)
PCB (1)
PCB (2)
PCB (3)
Inventory Management
- PCB for mass production

21. When maintenance worker checks a operating history of Industrial tool
which doesn’t has a display, he has to open the product to get it’s
information. This is a bother.
Production history
-Serial number:123456789
-Date of manufacture:2/2/2002
-Previous maintenance date:1/2/2007
-Operating time:54321 hours
Confidential 21
Maintenance service

22. 22
Anti-counterfeit
Factory
CounterfeitStolen property
Protect
Factory of
counterfeit
Trace
ID
Registration
User
Protect Brand Value

23. ～Are you satisfied with current barcode sticker or RFID sticker?～
23Confidential
Ultra small tag will be suitable for your product!
24
Reader
Small product
Multiple reading
Embedding
Barcode sticker
RFID sticker
×
× ×
Key concept of ultra small tag

24. 24
Sales Trend (MURATA RFID)

25. 25
UHF MAGICSTRAP®

26. 26
What is UHF MAGICSTRAP® ?
- UHF MAGICSTRAP® is RFID IC module of UHF band .
- RFID IC is compliant with EPC C1G2(Global Standard)
- RF impedance matching network for smaller external antenna and
wider frequency bands
- An inductive coupling circuit for non-conductive connection
- ESD protection circuit
UHF RFID ICResin
LTCC
= Low Temperature Co-fired Ceramic
Adhesive or soldering
Inductive coupling
to the antenna
RF matching
circuit
ESD protection

27. Key Feature of MAGICSTRAP®
 The only RFID chip with antenna matching circuitry included
 The antenna only has to receive / refract the incoming RF.
Other functions are handled by MAGICSTRAP® .
27
Function of RFID tag Conventional Tag MAGICSTRAP®based tag
Reception / refraction of RF wave Antenna function Antenna function
Impedance matching Antenna function Done by MAGICSTRAP®
Fix center frequency and bandwidth Antenna function Done by MAGICSTRAP®
IC
IC
Antenna trace
PCB
MAGICSTRAP®
Impedance
matching circuits
IC Resin

28. MAGICSTRAP® is a devise
28
* EPC Gen2 / ISO 18000-6C is the industry standard for UHF RFID – see backup for more information
 Packaged EPC Gen2* RFID chip
3.2 x 1.6 x 0.55 mm
Supplied in tape & reel for standard SMT assembly line
Includes 3rd party’s Gen2 IC chip (bare die)
 Simple and minimally-intrusive antenna reference designs
provided by Murata for embedding onto the PCB design
MAGICSTRAP® antenna
reference designs

29. Four Reference Designs…
29
12mm
10mm 13mm
32mm0.25 cm2 0.5 cm2 4.2 cm21.2 cm2
Type 3Type 2Type 1 Type 4
 Choose appropriate design based on space available / range desired
 Range increases from Types 1 to 4 (see range chart on later slide)
5mm
5mm 10mm
5mm
1
http://www.murata.com/products/rfid/tech_guide/index.html

30. 0
1
2
3
4
5
6
5 10 15 20 25
FreeSpaceReadRange[m]
Length "L" on PCB [cm]
PC, TV, AV set Home
Appliances
LMobile
Phone
Digital
Camera
Predictable Read Range
 Read range depends on type selected and length of
PCB ground plane available
30
Type 1
Type 2
Type 3
Type 4
Note: distances measured with 4W EIRP reader,
6dBi circularly polarized antenna, at 915 MHz;
MAGICSTRAP® using NXP G2XL/M
2
http://www.murata.com/products/rfid/tech_guide/pdf/UHF_MAGICSTRAP_3216size_Technical_Data_Sheet_20121109.pdf

31. 31
Lineup of UHF MAGICSTRAP®
IC : NXP G2XM, 512bit user memory
P/N Type Z@866.5MHz Z@915MHz
-009 Type 1 15-j45 25-j45
-010 Type 2 12-j107 12-j107
-011 Type 3 25-j200 25-j200
-012 Type 4 80-j405 80-j420
L W T
LXMS31ACNA-*** 3.2mm 1.6mm 0.55mm

32. …For a Variety of PCBs
 IT – PC, data server, modem, mobile phone
 Automotive – Instrument panel, audio set
 Industry – Inverter, programmable
controller
 Home appliances
 Amusement
32
1

33. 33
Even NO antenna
MS can be read without antenna at close range.
On resin (Reference)
On metal (Reference)
On resin
On metal

34. 34
HF MAGICSTRAP®

35. 35
HF MAGICSTRAP®
HF MAGICSTRAP® is one the world smallest RFID Tag.
Compliant with ISO15693.
Antenna included.

36. New MAGICSTRAP®
with I2C wired interface
36

37. Power supply
Command & data
I2C interface
MPU
RFID
Reader/Writer
Bi-directional
Communication
Packaged products
WiredWireless
MAGICSTRAP® with I2C interface
For wireless setting, data logging, failure recording
37
Fill in “dip switch setting”
when products are powered-off
in carton box.
Apply “dip switch setting”
when products are
powered-on.
Rewritable
memory inside
New !

38. Confidential
RFID
AAA
Micro controller
BBB
Antenna
AAA
LXMS2HACNF-165
LXMS2HACNF-165
Read：AAA
Write：BBB
BBB
Read
Write
User memory：3.3kbit
Interface：・UHF RFID
・I2C
Read/write user memory via RFID
Read/write user memory via I2C
User memory
I2C
38
MAGICSTRAP® with I2C (MS-165)

39. Reference:
http://www.rfidjournal.com/article/view/9526
English
German
French
Setting configuration
by connecting PC
with cable.
Inventory of
each conditions
Inventory of
one condition
English
German
French
Setting configuration
via RFID without
opening the package
Previous MS-165
When the printer turn on, the printer gets
configuration data from RFID’s memory.
English
Confidential 39
Configuration

40. Demo video for I2C MAGICSTRAP®
40
Available on web site !
http://www.murata.com/products
/rfid/demonstration/unit.html#tab
Late stage configuration
by RFID technology !

41. Back up
41

42. 42
Green IT award from JEITA
http://www.murata.com/new/news_release/2013/0919b/index.html
Life-cycle traceability of electric products with MAGICSTRAP®
wll contribute the reduction of energy consumption of society.

43. 43
Collaboration with IC makes
http://www.murata.com/products/rfid/demonstration/index.html#tab
http://www.murata.com/products/rfid/pickup/pdf/Murata_Magicstrap_Product_Line_up_V2_1j.pdf

44. 44
Information on Murata web site
http://www.murata.com/products/rfid/index.html
Product Pickup Data Sheets &
Application Notes
Product Demonstration
Videos
Technical Articles &
Presentations
Partners
MAGICSTRAP®Tutorial
Link to MEA web site

45. 45
Take a R(F)IDe with me…
http://www.murata.com/products/rfid/index.html