SlideShare verwendet Cookies, um die Funktionalität und Leistungsfähigkeit der Webseite zu verbessern und Ihnen relevante Werbung bereitzustellen. Wenn Sie diese Webseite weiter besuchen, erklären Sie sich mit der Verwendung von Cookies auf dieser Seite einverstanden. Lesen Sie bitte unsere Nutzervereinbarung und die Datenschutzrichtlinie.
SlideShare verwendet Cookies, um die Funktionalität und Leistungsfähigkeit der Webseite zu verbessern und Ihnen relevante Werbung bereitzustellen. Wenn Sie diese Webseite weiter besuchen, erklären Sie sich mit der Verwendung von Cookies auf dieser Seite einverstanden. Lesen Sie bitte unsere unsere Datenschutzrichtlinie und die Nutzervereinbarung.
Essential Parts of the Diffractometer• X-ray Tube: the source of X Rays• Incident-beam optics: condition the X-ray beam before it hits the sample• The goniometer: the platform that holds and moves the sample, optics, detector, and/or tube• The sample & sample holder• Receiving-side optics: condition the X-ray beam after it has encountered the sample• Detector: count the number of X Rays scattered by the sample
Instrumentation• Production of X-Rays• Collimator• Monochromator Filter Crystal monochromator• Detector Photographic methods Counter methods
The wavelength of X rays is determined by the anode of the X-ray source.• Electrons from the filament strike the target anode, producing characteristic radiation via the photoelectric effect.• The anode material determines the wavelengths of characteristic radiation.• While we would prefer a monochromatic source, the X-ray beam actually consists of several characteristic wavelengths of X rays. K L M
Bragg’s law is a simplistic model to understand what conditions are required for diffraction. λ = 2d hkl sin θ θ θ d hkl d hkl• For parallel planes of atoms, with a space dhkl between the planes, constructive interference only occurs when Bragg’s law is satisfied. – In our diffractometers, the X-ray wavelength λ is fixed. – Consequently, a family of planes produces a diffraction peak only at a specific angle θ. – Additionally, the plane normal must be parallel to the diffraction vector • Plane normal: the direction perpendicular to a plane of atoms • Diffraction vector: the vector that bisects the angle between the incident and diffracted beam• The space between diffracting planes of atoms determines peak positions.• The peak intensity is determined by what atoms are in the diffracting plane.
Laue photographic method• In his first experiments, Max von Laue (Nobel Prize in Physics in 1914) used continuous radiation (with all possible wavelengths) to impact on a stationary crystal. With this procedure the crystal generates a set of diffracted beams that show the internal symmetry of the crystal. In these circumstances, and taking into account Braggs Law, the experimental constants are the interplanar spacings d and the crystal position referred to the incident beam. The variables are the wavelength λ and the integer number n:n λ = 2 dhkl sin θnh,nk,nl• Thus, the diffraction pattern will contain (for the same spacing d) the diffracted beams corresponding to the first order of diffraction (n=1) of a certain wavelength, the second order (n=2) of half the wavelength (λ/2), the third order (n=3) with wavelength λ/3, etc. Therefore, the Laue diagram is simply a stereographic projection of the crystal
The Laue method in transmission mode The Laue method in reflection mode Laue diagram of a crystal
When x-rays are scattered from a crystal lattice, peaks of scattered intensity are observed which correspond to the following conditions:1.The angle of incidence = angle of scattering.2.The pathlength difference is equal to an integer number of wavelengths.The condition for maximum intensity contained in Braggs law above allow us to calculate details about the crystal structure, or if the crystal structure is known, to determine the wavelength of the x-rays incident upon the crystal.
X-radiation for diffraction measurements is produced by a sealed tube or rotating anode. H2O In H2O Out• Sealed X-ray tubes tend to operate at 1.8 to 3 kW.• Rotating anode X-ray tubes produce much more flux because they operate at 9 to 18 kW. Be Cu ANODE Be window – A rotating anode spins the anode at 6000 window rpm, helping to distribute heat over a e- larger area and therefore allowing the XRAYS XRAYS tube to be run at higher power without FILAMENT (cathode) melting the target. metal• Both sources generate X rays by striking the anode target wth an electron beam (vacuum) (vacuum) glass from a tungsten filament. – The target must be water cooled. – The target and filament must be contained in a vacuum. AC CURRENT
Most of our powder diffractometers use the Bragg-Brentano parafocusing geometry.• A point detector and sample are moved so that the detector is always at 2θ and the sample surface is always at θ to the incident X-ray beam.• In the parafocusing arrangement, the incident- and diffracted-beam slits move on a circle that is centered on the sample. Divergent X rays from the source hit the sample at different points on its surface. During the diffraction process the X rays are refocused at the detector slit. F: the X-ray source• This arrangement provides the best DS: the incident-beam divergence-limiting slit SS: the Soller slit assembly combination of intensity, peak shape, S: the sample and angular resolution for the widest RS: the diffracted-beam receiving slit number of samples. C: the monochromator crystal AS: the anti-scatter slit
What is X-ray Powder Diffraction (XRD)X-ray powder diffraction (XRD) is a rapid analyticaltechnique primarily used for phase identification of acrystalline material and can provide information on unitcell dimensions.The analyzed material is finely ground, homogenized,and average bulk composition is determined.
Fundamental Principles of X-ray Powder Diffraction (XRD) Max von Laue, in 1912, discovered that crystalline substances actas three-dimensional diffraction gratings for X-ray wavelengthssimilar to the spacing of planes in a crystal lattice. X-ray diffraction is now a common technique for the study ofcrystal structures and atomic spacing. X-ray diffraction is based on constructive interference ofmonochromatic X-rays and a crystalline sample. These X-rays are generated by a cathode ray tube, filtered toproduce monochromatic radiation, collimated to concentrate, anddirected toward the sample. The interaction of the incident rayswith the sample produces constructive interference (and adiffracted ray) when conditions satisfy Braggs Law (nλ=2d sin θ).
This law relates the wavelength of electromagnetic radiation tothe diffraction angle and the lattice spacing in a crystalline sample. These diffracted X-rays are then detected, processed and counted. By scanning the sample through a range of 2θangles, all possiblediffraction directions of the lattice should be attained due to therandom orientation of the powdered material. Conversion of the diffraction peaks to d-spacings allowsidentification of the mineral because each mineral has a set ofunique d-spacings. Typically, this is achieved by comparison of d-spacings with standard reference patterns.
All diffraction methods are based on generation of X-rays in anX-ray tube. These X-rays are directed at the sample, and thediffracted rays are collected. A key component of all diffraction is the angle between theincident and diffracted rays. Powder and single crystal diffractionvary in instrumentation beyond this.
Applications of XRD• XRD is a nondestructive technique• To identify crystalline phases and orientation• To determine structural properties:• Lattice parameters (10-4Å), strain, grain size, expitaxy, phase composition, preferred orientation (Laue) order- disorder transformation, thermal expansion• To measure thickness of thin films and multi-layers• To determine atomic arrangement• Detection limits: ~3% in a two phase mixture; can be~0.1% with synchrotron radiationSpatial resolution: normally none
Applications•X-ray powder diffraction is most widely used for the identificationof unknown crystalline materials (e.g. minerals, inorganiccompounds). Determination of unknown solids is critical to studiesin geology, environmental science, material science, engineeringand biology. Other applications include• characterization of crystalline materials• identification of fine-grained minerals such as clays and mixedlayer clays that are difficult to determine optically• determination of unit cell dimensions measurement of samplepurity
With specialized techniques, XRD can be used to:• determine crystal structures using Rietveld refinement• determine of modal amounts of minerals (quantitative analysis)• make textural measurements, such as the orientation of grains, in apolycrystalline sample• characterize thin films samples by: determining lattice mismatch between film and substrate and to inferring stress and strain determining dislocation density and quality of the film by rocking curve measurements measuring superlattices in multilayered epitaxial structures determining the thickness, roughness and density of the film using glancing incidence X-ray reflectivity measurements
Strengths and Limitations of X-ray Powder Diffraction (XRD)?Strengths Powerful and rapid (< 20 min) technique for identification of anunknown mineral In most cases, it provides an unambiguous mineral determinationMinimal sample preparation is required XRD units are widely available Data interpretation is relatively straight forward
Limitations Homogeneous and single phase material is best foridentification of an unknown Must have access to a standard reference file of inorganiccompounds (d-spacings, hkls) Requires tenths of a gram of material which must beground into a powder For mixed materials, detection limit is ~ 2% of sampleFor unit cell determinations, indexing of patterns for non-isometric crystal systems is complicated Peak overlay may occur and worsens for high anglereflections