3. VISTA 1600C EPON OLT Quick Start Manual
1.Physical Connection for VISTA 1600C
� Open the VISTA 1600C packet. Take out the serial-port console cable
accessory with the equipment.
� Connect the DB-9 plug of the serial-port console cable with the DB-9 plug
of the computer serial-port. Make sure they are firmly connected.
Figure 1-1 Connection for serial port of computer
� Connect the RJ-45 plug of the serial-port console cable with the CONSOLE
port of VISTA 1600C.
Figure 1-2 Connection for serial port of VISTA 1600C
2.Configuration of console setting
� Start the computer;
� Run the HyperTerminal. Click “Start” — “All Program” — “Accessories” —
“Communication” — “Hyper Terminal”;
Page 3 of 11 pages
4. VISTA 1600C EPON OLT Quick Start Manual
Figure 2-1 Configuration of console setting 1
� Input this connection name in popped-out window, such as “VISTA 1600C”.
Then click “OK”.
Figure 2-2 Configuration of console setting 2
� Choose the serial-port number in popped-out window, such as “COM1”.
Then click “OK”.
Page 4 of 11 pages
5. VISTA 1600C EPON OLT Quick Start Manual
Figure 2-3 Configuration of console setting 3
� Configure the properties of the chosen serial-port in the popped-out
configuration window. Detailed configuration is as Figure 2-4. Then click
“OK” to enter the interface of Command Configuration of VISTA 1600C.
Figure 2-4 Configuration of console setting 4
� Log in the interface of VISTA 1600C OLT command line through the
network management IP address of TELNET OLT. The default IP address is
192.168.0.200 .
Page 5 of 11 pages
6. VISTA 1600C EPON OLT Quick Start Manual
3.Configuration of VISTA 1600C
� Log in VISTA 1600C
********************************************************************
*******
* DONYAN TECH VISTA 1600C(Version R1.2-2965)
*
*
*
* Copyright(c) 1998-2009 Donyan Network Technologies Co., Ltd. All rights
reserved.*
* Without the owner’s prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
*
*
********************************************************************
*******
Login authentication
(none) login: root //Default user name of VISTA 1600C is “root”
Password:**** //Default password of VISTA 1600C is “epon”
� Configure the timeout of login in General Mode
(none)>terminal timeout 30 0 // Set the timeout of login as 30 min
%Success
� Display the information of OLT fans in General Mode
(none)>display faninfo
Index Status
1 active
2 active
3 active
4 active
� Display the information of OLT powers in General Mode
(none)>display powerinfo
Index PowerStatus FuseStatus
1 normal active
2 abnormal active
� Enter to VISTA 1600C Privileged Mode
(none)>enable // Enter to VISTA 1600C Privileged
Mode
Page 6 of 11 pages
7. VISTA 1600C EPON OLT Quick Start Manual
� Display the information of OLT system in Privileged Mode
(none)#display olt info
Device Model : VISTA 1600C
Device Name : (none)
System Time : Mon Jun 7 14:44:12 2010
InBand IP Address : 192.168.254.100
InBand IP Mask Length : 24
InBand MAC : 00:1d:2b:01:02:c5
OutBand IP Address : 192.168.0.200
OutBand IP Mask Length : 24
OutBand MAC : 0.0.0.0
OLT UpTime : 0 days 01h:03min:20s
OLT Manufacture Date : 2008-3-20
OLT Serial Number : V0.1
OLT Hardware Version : MCBSN:VISTA 1600C-No1234
OLT Boot Software Version : Linux version 2.4.19prelBuild05-17-10
OLT Firmware Version : V2.2.0-r131-b20100525
OLT Application Software Version : R1.2-2965
Switch Version : Managed(stackable) dev-build: root@localhost.localdomain
2010-05-18 10:45:33 +08
OLT Alarm Status : critical
OLT Temperature : 50.0
OLT Boot Type : warmReset
OLT Boot Source : localBackup
� Display the temperature of VISTA 1600C OLT device
(none)#display temperature
OLT device temperature: 50.0
� Set date and time for VISTA 1600C OLT device
(none)#date 2010/6/7-14:57:30
%set success
� Enter to VISTA 1600C Global Configuration Mode
(none)#configure //Enter to VISTA 1600C Global Configuration
Mode
%Enter configuration node. End with Ctrl+Z or command “quit” & “end”
Page 7 of 11 pages
8. VISTA 1600C EPON OLT Quick Start Manual
� Display the current version information of VISTA 1600C
(none)(config)#display interface pon 1/1
PON Name :pon-822607872
PON Type :pON02
PON Serial Number : 001d2b01027a
PON Optic Vendor Name : Teknovus
PON Port Admin Status : enable
PON Port Operation Status : ready
PON Hardware Version : 3723.0001
PON Firmware Version : 0225
PON DBA Grant Cycle : 15 (65.5us)
PON DBA Discovery Period : 1000ms
PON DBA Discovery Window : 16319 Byte
PON Encrypt Mode : none
PON Encrypt Key Exchange Time : 0s
PON Max Distance : 20Km
PON Max Llid Entries : (210)
PON Port Loopback Command : disable
PON Loopback Timeout : 60(seconds)
PON Long Frame Pass : enable
//Display the basic information of specified oun
(none)(config)#display interface onu 1/1/1
ONU Name : onu-1092092160
ONU Type : VISTA B04
ONU Status : ready
ONU Mac : 00:1d:2b:02:4c:45
ONU Uptime : 0 days 1 hours 18 minutes 4 seconds
ONU Chipset Id : 3715
ONU Hardware Version : 4d15
ONU Boot Software Version : 0140
ONU Firmware Software Version : 0225
ONU Application Software Version : 0225
ONU Personality Version : R225
ONU Distance : 9m
ONU Encrypt Mode : none
ONU Encrypt Key Exchange Time : 0s
ONU MAC Limit(link 0) :64
ONU Unknown MAC : drop
ONU Capability :
FEC Capability : unknown
Number of Gigabyte Ethernet Ports : 0
Number of Fast Ethernet Ports : 4
Page 8 of 11 pages
9. VISTA 1600C EPON OLT Quick Start Manual
Fast Ethernet Ports : 1 2 3 4
Number of Upstream Queues : 1
Maximum Queues per Port, Upstream : 20
Number of Downstream Queues : 1
Maximum Queues per Port, Downstream : 20
� Display running status of all VISTA 1600C PON cards
(none)(config)#display interface pon
Index Name SerialNum OperStatus FwVer GrantCycle(65.5us)DiscoveryPeriod EncryptMode ExchangeTime
1/1 pon-822607872 001d2b010469 ready 0225 15 1000 none 0s
1/2 pon-823132160 001d2b010469 ready 0225 15 1000 none 0s
1/3 pon-823656448 001d2b0104cf ready 0225 15 1000 none 0s
1/4 pon-824180736 001d2b0104cf ready 0225 15 1000 none 0s
� Display status of ONU
(none)(config)#display interface oun
Index Name Type Mac Uptime ChipId HwVer SwVer PersVer
Status
1/1/1 onu-1092092160 VISTA B04 00:1d:2b:02:4c:45 4876 3715 4d15 0225 R225
ready
1/1/2 onu-1092616452 VISTA B04 00:1d:2b:02:14:33 4877 3715 4d15 0225 0225
ready
1/1/3 onu-1092616448 VISTA B04 00:1d:2b:02:2a:2c 4862 3715 4d15 0225 R225
ready
1/1/4 onu-1092092160 VISTA B04 00:1d:2b:02:2a:74 4862 3715 4d15 0225 R225
ready
1/1/5 onu-1092616960 VISTA B04 00:1d:2b:02:2d:24 4862 3715 4d15 0225 R225
ready
� Display the port information of ONU interface
//Display the port information of ONU 1/1/1
(none)(config)#display interface onu 1/1/1
Index Enable linkstatus SpdDxMode FlowCtrlEnable MacLimit
1/1/1/1 enable linkdown half-10M disable 64
1/1/1/2 enable linkdown half-10M disable 64
1/1/1/3 enable linkdown half-10M disable 64
1/1/1/4 enable linkup full-10M disable 64
%Total :4
� Configure the network management IP address of VISTA 1600C
//Configure the outband IP address and subnet mask of VISTA 1600C
(none)(config-mgmt)#outband ipaddr 192.168.0.200/24
Page 9 of 11 pages
10. VISTA 1600C EPON OLT Quick Start Manual
It will lost connection to take effect.
CONFIRM: Are you sure ?(y/n) [n] y
%Success
//Configure the outband network management gateway of VISTA 1600C
(none)(config-mgmt)#gateway 192.168.0.1
� Rename the hostname
//Rename the hostname from default name “none” to “VISTA 1600C”
(none)(config-mgmt)#device name VISTA 1600C
� Save the current configuration information of ONU
VISTA 1600C#write config onu
ONUID onu id: 1/1/1-1/10/64
PONID onu id: 1/1-1/10(Each ONU under the pon will be saved.)
VISTA 1600C#write config oun 1/1
….
%Save ONU configuration to flash Success.
%Success
� Restore VISTA 1600C ONU to default configuration
// Restore VISTA 1600C ONU to default configuration
VISTA 1600C(config-if-onu*1/4/1)#oun restore
WARNING : This will restore onu default config ! Continue?(y/n) [y]
restore …… ok
CONFIRM : Reboot onu? (y/n) [y]
%Success
� Restart PON card of VISTA 1600C
VISTA 1600C(config-mgmt)#reboot pon 1/4
WARNING : Unsaved config will be lost after reboot ! Continue?(y/n) [y]
Note that reboot pon port will cause the pon card to reset.
Reboot success.
%Success
� Restart ONU
VISTA 1600C(config-mgmt)#reboot onu 1/1/1
WARNING: Unsaved config will be lost after reboot ! Continue?(y/n) [y]
Reboot success.
%Success.
Page 10 of 11 pages
11. VISTA 1600C EPON OLT Quick Start Manual
� Restart the VISTA 1600C system
VISTA 1600C#reboot
WARNING : System will reboot ! Continue?(y/n) [y]
System now is rebooting, please wait.
Page 11 of 11 pages