1. IOT IN SECURITY CAMERA AND
DOOR UNLOCK SYSTEM
GUIDED BY:
M.CHANDRA SEKHAR M.TECH
Asst.Prof & HOD of CSE
BHUMA SHOBHA NAGIREDDY MEMORIAL
COLLEGE OF ENGINEERING AND TECHNOLOGY
COMPUTER SCIENCE AND ENGINEERING
PRESENTED BY:
S.TARANNUM
2. CONTENT:
โขIntroduction
โขHow does it work?
โขSystem Architecture
Raspberry Pi-3Model B
GSM module/Android app
Wi-Fi Module
Camera Module
โขFlowchart and Algorithm
โขConclusion
3. INTRODUCTION
โข The purpose of this project is to design a system which
will control door by using smart phone operated by
Mobile device.
โข This system mainly consists of Web camera to detect
guest, Raspberry Pi Model B3 which have inbuilt Wi-Fi
module and a Mobile device for interfacing with system.
6. Smart Door Security System has modules like
โข Raspberry Pi-3Model B
โข GSM module/Android app
โข Wi-Fi Module
โข Camera Module
7. Fig.2, Raspberry Pi-3Model B
Raspberry Pi-3Model B:
โข Raspberry Pi-3Model is the third generation Raspberry Pi
โข It does not have storage drive but one can use SD card for
storing operating system as well as for booting and long term
process
8. GSM module/Android app
โข GSM is Global System for Mobile communication is used for digital mobile
telephony system. GSM modules used to establish communication between
a computer and a GSM system.
โข The Global System for Mobile communication is used to alert the user by
sending and receiving the messages as controlled by sensors and Raspberry
pi.
Fig.3, Operating Door lock using Android App
9. Wi-Fi Module
โข Wi-Fi is a technology for wireless local area networking
with devices based on the IEEE 802.11 standards.
โข This system uses Wi-Fi module on both side at user
side for accessing the door from anywhere and also at
Raspberry pi to control system.
10. โข The Camera Module is a great accessory for the Raspberry Pi,
allowing users to take pictures and record video in full HD.
โข Raspberry Pi-3Model B has in-built Camera interface (CSI).
โข To capture the picture, we need to save file as camera.py and
need proper and correct python coding.
Camera Module
Fig.4;Locating camera port and connect the camera
11. FLOWCHART & ALGORITHM
Flow of working of the system and flow of the programme are shown in these
following steps:
Steps Included:
๏ถ Start.
๏ถ Initialization of Raspberry pi, Camera, Sensors.
๏ถ If any person comes, camera captures the picture/image and sends to the
userโs mobile device.
๏ถ User gets notification and opens/closes door according to his/her
convenience.
๏ถ If system crashes
๏ถ Backup plan(biometric)
๏ถ End.
12.
13.
14. โข This system mainly consists of Web camera to detect guest, Raspberry
Pi Model B3 which have inbuilt Wi-Fi module and a Mobile device for
interfacing with system
Proposed system
โข Proposed system is cheap, reliable and components are easily available.
Existing system
15. ADVANTAGES
โข Necessary action can be taken in short span of time.
โข For Future Enhancement - Retina Scanner can be used
instead of biometric.
16. CONCLUSION
โข It is also portable and easily upgradable. System provides
Security locks for door.
โข The security level is increased due to the usage of Raspberry
Pi-3Model B which sends the images to the user.