1. Resume of
Mohammad Shahin Manjurul Alam
House#287/288(4th Floor), Road#01, Block: Ta,
Section:12, Mirpur-12, Pallabi, Dhaka-1216, Bangladesh
Cell No : +88- 01818730583
Email: shahin.bsme@gmail.com
Career Goal
To be an efficient employee with strong desire, where it would be competent to make use of
the qualifications and skills through challenges and trigger myself through qualitative and
growth- oriented performance. I always like to take my profession as my challenge.
Educational Qualifications at a Glance
Bachelor of Science in Mechanical Engineering (BSME)
Passing Year: 2010
CGPA: 3.48 out of 4.00
Major Course: Refrigeration and Air Conditioning System, Power Plant Engineering,
IUBAT- International University of Business Agriculture and Technology, Dhaka.
Higher Secondary School Certificate (H. S. C.)
GPA: 4.20 (out of 5 scales)
Year: 2006
Major: Science
College: Mathbaria Govt. College
Board: Board: Barisal Education Board, Barisal.
Secondary School Certificate (S. S. C.)
GPA: 4.31
Year : 2004
Major: Science
School: K. M. Latif Institution, Perojpur
Board: Barisal Education Board, Barisal.
Personal Profile
1. Name : Mohammad Shahin Manjurul Alam
2. Father’s Name : Md. Shah Alam
3. Mother’s Name : Mrs. Hasi Alam
4. Date of Birth : 01/01/1988
5. Religion : Islam
6. Blood Group : A+
7. Marital status : Married
8. Passport No. : AB 4289507
9. Present Address : House#287/288, Road#1, Block-Ta, Mirpur-12, Pallabi, Dhaka-1216,
Bangladesh
10.E-mail address : shahin@sajetc.com, shahin.bsme@gmail.com
11.Mobile Number : +8801818730583
2. Language Skill
1 Fluent in English (both verbal & written)
2 Fluent in Bengali (both verbal & written)
3 Have the abilities in organization & conducting seminars, multimedia presentation and
report writing.
Professional Skill
1. Vibration Analysis
2. Dynamic Mass Balancing
3. IR Thermography (Mechanical, Electrical, Level Check)
4. Lube Oil Analysis
5. Welding Inspection
6. Visual Inspection
7. Video-Borescopic Inspection
8. Dye Penetrant Test
9. Magnetic Particle Test
10. Ultrasonic Testing
11. Phased Array Ultrasonic Testing
12. Radiography Testing
13. Eddy Current Testing
14. Hardness Testing
15. XRF/PMI Technology
16. NDT Instruments Training, Commissioning and Calibration
17. Condition Monitoring Instruments Training, Commissioning
18. After Sales Support
19. Training on NDT and Condition Monitoring Method
20. Measuring and Precision Equipments Training and Installation
Professional Experience
1. Reliability Engineer
(Condition Monitoring and Non-Destructive Testing Solution)
Organization: Saj Engineering & Trading Company
Duration: (January, 2013 – Present)
Responsible for: 1. Vibration Analysis 2. Dynamic Mass Balancing, 3. Oil Analysis 4. IR
Thermography 5. Video- Borescopic Inspection, 6. NDT Service (All Method)
7. Training 8. Presentation 9. Demonstration, 10. Techo-Commercial Proposal Submit
11. Consultancy
2. Sales & Service Engineer
(Condition Monitoring & Non-Destructive Testing Technology)
Organization: Saj Engineering & Trading Company
Duration: (January, 2011 – December, 2012)
Responsible for: 1. Sales 2. Service, 3. Training 4. Presentation 5. Demonstration,
6. Proposal submit 7. Customer Visit etc.
3. Experience:
1. Provide the training and installation of Olympus IPLEX-FX videoscope to Biman Bangladesh
Airlines
1. Provide training on Ultrasonic Testing and Phased Array Ultrasonic Testing equipments in
several industries.
2. Provide the training for CSI 2130 Vibration Analyzer to Training Institute for Chemical
Industries (TICI)
3. Doing Endoscopic Inspection in Linde Bangladesh
4. Vibration analysis of Ball Mill, Gear Box in Fresh Cement.
5. Vibration Analysis in Ghorashal Power Station
6. Dynamic Mass Balancing of ID Fan in Holcim Cement Bangladesh
7. Vibration Analysis in United Power Generation
8. Vibration Analysis in Power Plant and Suger Mills.
9. Dynamic Mass Balancing in Deshbandhu Rice Mill blower Fan
10. Vibration Analysis Service in Desh Energy Ltd.
11. Lube Oil Analysis Service in Linde Bangladesh Ltd.
12. Lube Oil Analysis Service in United Engineering & Power Services Ltd.
13. IR thermography in Several Textile industry
14. Provide Vibration Analysis Service in ECPV Power Ltd.
15. Provide the Borescopic Inspection Service in ECPV Roles Royce Engine.
16. Provide IR Thermography Service in Santos Sangu Gas Field (Level Check) and Garments
Industry (Electrical Inspection).
17. Video-Borescope Inspection of Turbine Combustion Chamber in Sirajganj 150MW PowerPlant
18. Vibration Analysis Service CSI 2130 in TK Paper Mill
19. Provide Vibration Analysis Service in Bangladesh Steel Re-rolling Mills (BSRM)
20. Provide Hardness Testing Service in Bangladesh Air Force.
21. Magnetic Particle Inspection in different Power Plants
22. Provide the video-borescopic inspection service and reporting for a boiler tube of an Oil
Tanker.
23. Ultrasonic Testing and Phased Array Ultrasonic Testing in several industries.
24. Lube Oil Analysis and reporting for different industries.
25. Installation and commissioning of CSI 5200 Oil Analyzer in KAFCO
26. Provide the training for Olympus MG2 series and 38DL-Plus Thickness Gage to MIST,
Meghna Petroleum and so many organization.
27. Conduct presentation in several government and private organization
28. Conducts seminar for Pertamina Lubricants in Dhaka, Comilla and Chittagong.
29. Prepared Tender Schedule (Bid) in many governments and private organizations.
30. Provide Training for CSI 9830 Thermal Image Camera at Atomic Energy Center.
31. Provide Training for precision surface grinding machine at Atomic Energy Center.
32. Provide Training for Olympus EPOCH 1000i Phased Array Ultrasonic Flaw Detector in Atomic
Energy Center.
33. Visit Bali, Indonesia for CSI 2140 and AMS Machinery Software training.
34. Provide NDT services in several industries.
35. Provide the Eddy Current Testing service in NEPC Power Plant for crank shaft.
36. Provide Eddy current testing service and report for Bismillah Aviation aircraft wheel hub.
37. Participate in BUET Industrial Exhibition for several times.
38. Making two company profiles Saj Engineering & Trading Company and Saj Industrial &
Inspection Company.
39. Visit Singapore for 2 times for the training of Olympus NDT and Remote Visual Inspection
Products
4. 40. Visit Singapore for 2 times for the training of Emerson Vibration Analysis Technology.
41. Provide the training for portable hardness tester in Renwick 1 & Jajneswar Company.
42. Provide Training, Installation and Commissioning of Refrigeration Demonstration Cycle Unit
in Military Institute of Science & Technology.
43. Provide Training, Installation and Commissioning of Olympus 38 DL Plus Thickness Gage in
Military Institute of Science & Technology
44. Supervise the radiography testing services in Meghnaghat Power Project.
45. Provide Training on MPI method and equipments in Bangladesh Power Development Board
46. Provide presentation on NDT in several national seminars.
47. Provide Phased Array UT basic training and Olympus Epoch 1000i training in PEB Steel
48. Provide Phased Array UT basic training and Olympus Epoch 1000i training in Bay Tech NDT
solution.
49. Provide Presentation and Demonstration on NDT and CM method and equipments in many
government and private organization.
50. Provide the Training on OmniScan SX and TOFD in Dhaka University of Engineering &
Technology
51. Provide the training UT Thickness Gage and UT Flaw Detector in Bangladesh Military
Academy.
52. Provide the Eddy Current Testing and MPI training in NovoAir Ltd.
53. Provide the training on IPLEX RX Videoscope in Dhaka University of Engineering &
Technology.
54. Face the meeting with different inspection companies like Bureau VERITAS, SGS, RINA,
Intertek etc.
55. Prepared the techno-Commercial Proposals for many industrial projects.
56. Prepared the Procedure for different NDT Method.
57. Prepare WPS, PQR and WPQR for Sarker Steel Ltd.
58. Sell 5 Units of CSI 2140 Machinery Health Analyzer.
59. Sell 15 Units of Ultrasonic flaw detector.
60. Sell 20 units of Ultrasonic thickness gage.
Computer Skill
1. Operating System : Windows 2008, , XP, Vista
2. Internet : Surfing, Browsing
3. Word Processor : Microsoft Word
4. Spreadsheet Analysis : Microsoft Excel, Microsoft Access.
5. Presentation Graphics : Microsoft PowerPoint,
6. Auto CAD : 2D
Adove Photoshop
Personal Attributes
1. Strong skill in communication.
2. Great public speaking capability.
3. Performing duty in any situation
5. Extra Curriculum Activities
1. Member of IUBAT Mechanical Engineering Society (ISME)
2. Member of Red Cross.
3. Life blood donor of Quantum Method.
Training and Certificates
1. Vibration Analysis ISO Category Level - I (Course Code: 2031) by Emerson Process
Management
2. Fundamentals of CSI 2130 (Course Code: 2072) by Emerson Process Management
3. Introduction to AMS Machinery Health Manager (Course Code: 2068) by Emerson
Process Management
4. Training CSI 2140 and AMS Machinery Health Analyzer, Bali, Indonesia.
5. ASNT Ultrasonic Testing Level- II
6. ASNT Eddy Current Testing Level -II
7. ASNT Magnetic Particle Testing Level-II
8. Radiography Testing Level I (ISO) & II (ASNT)
9. Lube Oil Analysis Basic Training by Spectro Scientific.
10. IR Thermography Basic Training by SAJ Engineering.
11. Three months training of PLC course.
12. Two months training on AUTO CAD (2D)
13. Two months general English course (British Council).
14. Four months IELTS course (Saifurs).
15. Four months phonetics course (Saifurs)
16. Basic Vibration Analysis Training in Singapore under Emerson Process Management.
17. Olympus NDT and Industrial Endoscope Product Training in Singapore under Olympus
Singapore Ltd. (2 times)
18. XRF/PMI Technology Training from Olympus, Singapor
19. OmniScan SX (Phased Array UT) and TOFD Training in Olympus Singapore
20. Participate NDT National Workshop arranged by Atomic Energy Center.
………………………..
Mohammad Shahin Manjurul Alam
(Date: 23. 05. 2016)