Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.

Dental Cement

  • Als Erste(r) kommentieren

Dental Cement

  1. 1. Dental luting cement <ul><li>Bond Strength </li></ul><ul><li>Strength </li></ul><ul><li>Flow (viscosity) </li></ul><ul><li>Wetting </li></ul><ul><li>Film thickness (<25 microns ) </li></ul><ul><li>Solubility </li></ul><ul><li>Working,Setting time </li></ul><ul><li>Esthetic </li></ul>*Complication dr shabeel pn
  2. 2. Dental luting Cement <ul><li>Zinc phosphate </li></ul><ul><li>Polycarboxylate </li></ul><ul><li>Glass ionomer </li></ul><ul><li>RMGI cement </li></ul><ul><li>Resin cement </li></ul>
  3. 3. Zinc phosphate <ul><li>Over 100 yrs of clinical experience </li></ul><ul><li>Routine application </li></ul><ul><li>Post-op sensitivities </li></ul><ul><li>Low hardness </li></ul><ul><li>High solubility </li></ul><ul><li>pH </li></ul><ul><li>No bond with tooth </li></ul>
  4. 4. Polycarboxylate <ul><li>Molecular bonding to tooth substance (2MPa) </li></ul><ul><li>Cost </li></ul><ul><li>Low F ¯ release </li></ul><ul><li>Low post-op sensitivities </li></ul><ul><li>Low hardness </li></ul><ul><li>solubility </li></ul>
  5. 5. Glass ionomer <ul><li>Molecular bonding to tooth substance </li></ul><ul><li>F ¯ release </li></ul><ul><li>Cost-Eff. </li></ul><ul><li>Minimal dimentional change </li></ul><ul><li>Occa. post-op sensitivities </li></ul><ul><li>Sensitive to water </li></ul><ul><li>Limited application (ceramics) </li></ul>(High caries risk) (3-5MPa)
  6. 6. RMGI <ul><li>Molecular bonding to tooth substance </li></ul><ul><li>F ¯ release </li></ul><ul><li>Low solubility </li></ul><ul><li>Fewer post-op sensitivities </li></ul><ul><li>Application ? (ceramics,composite) </li></ul>(>10MPa)
  7. 7. Resin cement <ul><li>High adhesive quality (18-20MPa) </li></ul><ul><li>⇧ Retention </li></ul><ul><li>High hardness </li></ul><ul><li>Low solubility </li></ul><ul><li>All metal, ceramic,composite (indirect) </li></ul><ul><li>Occa. Post-op sensitivities </li></ul>
  8. 8. Adhesive quality <ul><li>Non-adhesive (zinc phosphate) </li></ul><ul><li>Micromechanical bonding (resin cement) </li></ul><ul><li>Molecular adhesion (polycarboxylate,GI,RMGI) </li></ul>
  9. 9. Dental Cement <ul><li>Zinc phosphate </li></ul><ul><li>Polycarboxylate </li></ul><ul><li>Glass ionomer </li></ul><ul><li>RMGI cement </li></ul><ul><li>Resin cement </li></ul>Conventional Adhesive
  10. 10. Advantage conventional cement <ul><li>Easy handling </li></ul><ul><li>Moisture tolerance </li></ul><ul><li>No pre-Tx steps </li></ul><ul><li>Routine for metal base </li></ul>
  11. 11. Advantage resin cement <ul><li>Excellent mechanical properties </li></ul><ul><li>High bond strength with pre-Tx step </li></ul><ul><li>High aesthetics/translucency </li></ul><ul><li>Suitable for Ceramic, Porcelain, Composite,Metal </li></ul>
  12. 12. Resin cement <ul><li>Matrix </li></ul><ul><li>Primer </li></ul><ul><li>Filler </li></ul><ul><li>Coupling agent </li></ul>
  13. 13. Resin cement <ul><li>Matrix - Dimethacrylate </li></ul><ul><li>Primer- Dicrylate </li></ul><ul><li>Filler - Quartz, silica </li></ul><ul><li>Coupling agent- Silane dimethacrylate </li></ul>
  14. 14. <ul><li>Total etch Rely X ARC , Variolink II ,Calibra ,C&B </li></ul><ul><li>Self-etch Panavia F </li></ul><ul><li>Self-Adhesive Rely X Unicem </li></ul>Resin cement
  15. 15. Adhesion <ul><li>Dentin/enamel (micromachanical bond) </li></ul><ul><li>Porcelain (hydrofluoric acid,Ammoniumfluoride acid)+ silane </li></ul><ul><li>Metal (sandblasting)(metal bonding adhesive) </li></ul><ul><li>Fiber post </li></ul>
  16. 16. Adhesion <ul><li>Dentin/enamel (micromachanical bond) </li></ul><ul><li>Porcelain (hydrofluoric acid,Ammoniumfluoride acid)+ silane </li></ul><ul><li>Metal (sandblasting)(metal bonding adhesive) </li></ul><ul><li>Fiber post </li></ul>
  17. 17. Adhesion <ul><li>Dentin/enamel (micromachanical bond) </li></ul><ul><li>Porcelain (hydrofluoric acid,Ammoniumfluoride acid)+ silane </li></ul><ul><li>Metal (sandblasting)(metal bonding adhesive) </li></ul><ul><li>Fiber post </li></ul>
  18. 18. Adhesion <ul><li>Dentin/enamel (micromachanical bond) </li></ul><ul><li>Porcelain (hydrofluoric acid,Ammoniumfluoride acid)+ silane </li></ul><ul><li>Metal (sandblasting)(metal bonding adhesive) </li></ul><ul><li>Fiber post </li></ul>
  19. 19. Why are fiber post? <ul><li>Clinical success rate: Less root fracture than with metal posts: Dentine-like flexural strenght avoids the “wedge” effect of stiff and hard metal posts. </li></ul>metal fiber post <ul><li>Esthetics : the new post is translucent and does not shine through ceramic or composite restorations </li></ul><ul><li>3. Easy and conservative removal with drills if endodontic re-treatment is required </li></ul>further advantages : no corrosion, easy cutting of over-length, light-translucent... root fracture! no local peak forces, no root fracture
  20. 20. Resin cement <ul><li>Bond strength > Zinc phosphate 10 times </li></ul><ul><li>↑ Retention </li></ul><ul><li>Reinforced ceramic - base Crown </li></ul><ul><li>Adhesive system (micromachanical bond-tooth) </li></ul><ul><li>(chemical bond-porcelain,metal) </li></ul><ul><li>Low solubility </li></ul><ul><li>↓ leakage </li></ul>
  21. 21. Pre-treatment procedure
  22. 22. Pre-treatment procedure
  23. 23. Pre-treatment procedure
  24. 24. Polymerization <ul><li>Light-cured/Dual cure (2 vials - Base,Catalyst) </li></ul><ul><li>Self cure/auto cure </li></ul><ul><li>Dual cure </li></ul>
  25. 25. Adhesion <ul><li>Dentin/enamel (micromachanical bond) </li></ul><ul><li>Porcelain (hydrofluoric acid,Ammoniumfluoride acid)+ silane </li></ul><ul><li>Metal (sandblasting)(metal bonding adhesive) </li></ul><ul><li>Fiber post </li></ul>Adhesive cement bonding to tooth ,alloy structure
  26. 26. <ul><li>Anesthetic </li></ul><ul><li>Isolate (pack cord) </li></ul><ul><li>Light cure 2-3 sec </li></ul><ul><li>Include 3-5 shades,silane </li></ul><ul><li>Remove solvent- can inhibit setting of resin cement </li></ul><ul><li>Excess bonding – poor fit,low strength </li></ul><ul><li>Temp NE </li></ul>Clinical Tips
  27. 27. Shade <ul><li>Opaque – veneer + Tetracycline </li></ul><ul><li>Clear (translucent) </li></ul><ul><li>Vita shade </li></ul>

    Als Erste(r) kommentieren

    Loggen Sie sich ein, um Kommentare anzuzeigen.

  • MamitoAlbokhity

    Mar. 14, 2019
  • NadaMansy1

    Jun. 6, 2019
  • MohdRasydan2

    Jul. 20, 2019
  • anjalipatel174

    Jul. 28, 2019
  • ShivangiJagmohan

    Aug. 30, 2019
  • PriyankaAgarwal253

    Sep. 14, 2019
  • DrHamadButaiban

    Oct. 30, 2019
  • ShivanshVerma7

    Jan. 21, 2020
  • Kamelzordok

    Feb. 11, 2020
  • JitendraSingh850

    May. 1, 2020
  • SecatHan

    May. 18, 2020
  • FatimaAlAhmed2

    May. 20, 2020
  • NeginYazdani1

    May. 21, 2020
  • AlrubayeRQ

    May. 21, 2020
  • andrewbanda14

    Aug. 1, 2020
  • MariemMohamed11

    Dec. 12, 2020
  • SirajIdan

    Feb. 1, 2021
  • MousaMostafa1

    Mar. 17, 2021
  • SarahElbeltagy

    Mar. 18, 2021
  • FizaKhan94

    Jul. 19, 2021

Aufrufe

Aufrufe insgesamt

50.070

Auf Slideshare

0

Aus Einbettungen

0

Anzahl der Einbettungen

47

Befehle

Downloads

2.139

Geteilt

0

Kommentare

0

Likes

123

×