1. CURRICULM VITAE
(11TH SEPTEMBER)
OBJECTIVE
Experience practical understanding of applying theoretical concepts in the working of general problems so as to gain the ability of
contemplating academic knowledge for being able to have realistic advantages. Moreover expertizing over my skills so as to utilize them for
diverse understanding of my discipline.
EDUCATIONAL CREDENTIALS
B. Tech in Civil Engineering – National Institute of Warangal – 8.28 CGPA – 4th semester.
12th – C.B.S.E. – Guwahati – Maharishi Vidya Mandir Senior Secondary School – 91.6% - 2013.
10th – C.B.S.E. – Guwahati – Maria’s Public School – 91.2% - 2011. Expertise
AREA OF EXPERTISE - Mix Design; LABORTARY & FIELD test of concrete, cement and aggregates; SCC; AutoCAD; Matlab;
STAAD.Pro; C++; communication & writing.
SUMMER INTERNSHIP
NCCBM (National Council of Cement and Building Material) – July 2016 – NCB Bhavan, Hyderabad. In the division of "Cement Research and
Independent Testing (CRT)" the following work has been carried out:
NDT (Non Destructive Test)
o Schmidt Rebound Hammer Test
o Ultrasonic Pulse Velocity Test
Test on HARDENED CONCRETE
o Compression Test (used Compression testing machine)
o ACCELERATED CURING Test
Test on CEMENT
o Sieve Analysis Test and Blaine Air Permeability Test
o Autoclave Test and Le Chatelier EXPANSION Test
Test on AGGREGATES
o Wet sieve analysis
o Combined grading
Preparation of MIX DESIGNS
o without use of admixtures (for both crushed sea sand and river sand)
o using chemical admixture (GLENIUM ACE)
o using mineral admixture (fly ash, ggbs, silica flumes)
o casted FIBER REINFORCED CONCRETE (steel, glass)
Design and Testing of SCC (Self Compacting Concrete)
o Slump flow by Abrams cone
o V funnel and V funnel at T5 minutes
o L box and U box
Other test: lime reactivity test; marsh cone test; depth of carbonation test
RESEARCH PROJEST: COMPARISON OF MIX DESIGN CODES (IN PROGRESS)
Comparison of various Mix Design codes in the casting of cubes by taking three grades of concrete into consideration (M30, M50 and M70) and
keeping the other parameters same like grade of OPC, exposure, maximum nominal size of aggregate, type of coarse aggregate, zone of sand,
specific gravity, percentage absorption and moisture and the quality of mineral and chemical admixtures same.
Later a comparative study on strength variation with respect to different parameters for 1, 3, 7, 14, 28 and 56 days will be made. Moreover a
user interface design will be created for the above purpose using a Database Management System. Further study on microscopic structure will
also be done using SEM.
The design codes worked upon are:
Indian Standard Recommended method IS 10262 (2009)
ACI Committee 211 Method
DOE Method
SUPERVISOR: Dr. P. Rathish Kumar, M. Tech. in (Structural Engineering), Ph.D. (India), Dr. Engineering (Japan).
Associate Professor in Structural Division, Department of Civil Engineering, Associate Dean Planning and Development,
National Institute of Technology, Warangal, INDIA. Phone: 9849670347. Email id: rateeshp@gmail.com
SOFTWARE SKILLS
Auto-CAD 2D and 3D - Autodesk - 2016.
Matlab - The MathWorks, Inc. - 2015.
STAAD.Pro V8i SS5 - Bentley - 2014.
Programming Language - Turbo C++, Dev C++.
RISHAVBAISHYA
Hyderabad,INDIArishav.b151@gmail.com+91–9949928869
2. EXPERIENCE & FIELD SKILLS
Concrete Lab
Fineness, Specific Gravity, Standard Consistency, initial and final setting time of Cement.
Fineness modulus, percentage of voids, bulk density, specific gravity of Coarse and Fine aggregates.
Workability test - Slump cone test, compaction factor test, Vee - Bee consistometer test.
Preparing and curing concrete cubes for test and determination of compressive strength.
Study of stress strain characteristics of concrete and test for its TENSILE strength.
Material Testing Lab
Tension test on mild steel to study its stress strain characteristics using U.T.M.
Torsion test on a shaft using torsion testing machine and study the relationship between Young's Modulus, Rigidity Modulus and Poisson's Ratio.
Bending test on simply supported beam, propped cantilever beam and continuous beam.
Compression test under axial loading.
Geotechnical Engineering Lab
Specific gravity, grain size distribution by sieve analysis and determination of ATTERBERG limits.
Determination of Field Density by Sand Replacement Method and Core Cutter Method
Constant Head and Variable Head Permeameter Test
Direct Shear test, Unconfined Compression test, Triaxial Compression test and Consolidation test.
Proctor's Standard Compaction TestEngineering
Geology Lab
Crystallography
Mineralogy – Metallic and Non-metallic
Identification of Igneous, Sedimentary and Metamorphic rocks
STRENGTHS
o Punctuality – have excellent attendance record in both school and college.
o Team work skills – served as an executive member for an association to organise its programs.
o Dedicated – to the responsibilities by all means.
o Adaptability – among people with varied interest and regional background as being an INDIAN.
o Self-motivated – the sole reason for all my success.
WORKSHOP & CERTIFICTE COURSES
Bridge Design Workshop by Axis'15 in association with Ark Techno solutions - September 2015.
Auto CAD 2D & 3D - Computer Education Centre, Guwahati - Grade A as per Computer Society of Indian Standards - Training duration 15/06/2015 to 15/07/2015.
STAAD.Pro - CADD Centre Training Services, Guwahati - A160664231 - Training duration 01/06/2016 to 15/06/2016
ACHIVEMENTS
Certificate of Appreciation and Memento - Most Passionate & Dedicated Executive Member - Civil Engineering Association - NIT Warangal – April 2016.
Participation Certificate - Inter School Sports & Games Competition - CBSE Cluster 1, East Zone KHO-KHO Tournament - 9th November to 11th November 2010
- 19 years age group - recognised by The Ministry of Youth Affairs & Sports, Government of India.
Merit Scholarship Certificate - National Institute of Warangal – 1st & 2nd year - 2014 - 2016.
Certificate of Merit - Maria's Public School - Conduct - 2006 - 2007.1st position in Group A - Late Amulya Kakati (Bhaiti) Memorial Drawing Competition -
organised by Nabasuraj Yuba Sangha - 2004.
Certificate of Participation - Game Dome & DSLR Workshop - SpringSpree - NIT Warangal - 2015.
EXTRA – CURRICULAR ACTIVITIES
Executive Member – Civil Engineering Association – NIT Warangal – 2015 – 2016.
Hobbies
o Learning Software – MATLAB solely learnt by reading e-books and following video clips.
o Travelling – Trip to Mumbai was a learning experience, getting involved with the local lifestyle.
o Listening Music – it’s an addiction.
PERSONAL PROFILE
LinkedIn Profile: https://in.linkedin.com/in/rishavbaishya
Date of Birth 11th May 1994.
Address – 2511, 1k Mega Hostel, NIT Warangal, Hanamkonda, Warangal, Telangana, INDIA, PIN – 506004.
Languages known – English, Hindi and Assamese.
Gender – Male.
Reference available on requests