Third edition of newsletter of PsiControl Mechatronics

1. news
1
Wevelgem-based West Flemish Traficon is a global market
leader in intelligent traffic detection systems. Since 1992 it
has been focusing on developing technology for safer and
smoother traffic.The company develops, produces and sells
intelligent equipment for incident detection in tunnels and
motorways as well as for vehicle detection at intersections.
Its current market comprises more than 60 countries.The
purpose of the in-house developed products is to analyze
traffic flows on the basis of real-time video images. In early
2010,Traficon launched its latest showpiece on crossroad
detection for pedestrians, the SafeWalk. For the production
of this innovation, it closely cooperates with PsiControl
Mechatronics.
‘Traficon’s SafeWalk is an intelligent video sensor that detects
pedestrians waiting at pedestrian crossings. Constant screening
of the sidewalks for pedestrians allows for the more dynamic
control of the traffic lights. Unnecessary waiting times, both for
pedestrians and drivers, can thus be reduced to a minimum.
On top of this, the intelligent detection system contributes to
a considerable improvement of the pedestrian’s safety’ stated
Geert Creus, Logistics Manager of Traficon.The new video
detection system for pedestrians combines stereovision
technology with intelligent image processing technology.
Two CMOS cameras used in a parallel set-up allow the
SafeWalk to convert 2D images into 3D information.
Embedded Traficon algorithms subsequently process the
information into a more accurate analysis of the presence of
pedestrians and their attitudes.Therefore,SafeWalk realizes
a more efficient traffic flow and helps to avoid delays. In
addition, it contributes towards higher pedestrian safety.
Traficon commissioned the entire production of the
SafeWalk sensor to PsiControl Mechatronics. We take
care of mounting the print boards, carry out a complete
functional test of the modules, read in the software and
perform final assembly.Our extensive know-how in the field
of test systems ledTraficon to also entrust the full design of
a state-of-the-art test system to PsiControl Mechatronics.
Consequently,not only are the print boards being tested,we
also carry out a complete functional test of the SafeWalk
in order to guarantee the highest quality level. Traficon’s
SafeWalk sensors are already in use in Germany,Ireland,the
Netherlands and the US.For further information,please visit
www.traficon.com.
ISSUE III - Q4 2010
Dear reader,
Enclosed you can find the third edition of our newsletter with information to keep you up-to-date with the latest developments at PsiControl
Mechatronics. Helped by a gradually improving economy, PsiControl Mechatronics has again had the wind in the sails since the second quarter
of this year.We are delighted to report an increase in our activities and new client projects in various sectors, such as compressors, railway
materials, textile machinery and HVAC (heating, ventilation and air conditioning).We also recently invested in a new machine for selective
soldering (the Ecoselect 2 of Erea GmbH).This new state-of-the-art soldering machine allows for the efficient placement of insertion components
within a highly limited tolerance.The machine combines speed with a very reliable quality level and we therefore take great pride in being able
to include this technological gem in our machine fleet.This issue of our newsletter also contains information about a project we are carrying
out for Traficon. Just like PsiControl Mechatronics,Traficon has its roots in West Flanders.The company is currently the world market leader in
intelligent traffic detection systems. Last but not least, you will find some information about our internal testing facilities in this bulletin.
We wish you pleasant reading!
Cathy Defoor
VP PsiControl Mechatronics
PsiControl Mechatronics, a lifelong partner ofTraficon, now also involved in its
new showpiece, the ‘SafeWalk’

2. Responsible editor:
Cathy Defoor, PsiControl Mechatronics, K. Steverlyncklaan 15, BE-8900Ypres
Tel +32 57 40 96 96, Fax +32 57 40 96 97
We welcome your feedback on this newsletter. Please email any comments to info@psicontrol.com
If you no longer wish to receive our newsletter, please send an email with ‘unsubscribe’ in the subject line to info@psicontrol.com
You can also contact PsiControl Mechatronics by telephone on +32 57 40 96 96 or visit our website www.psicontrolmechatronics.com
Are you looking for a ‘zero service’
quality controller?
New automation concepts require controllers to
remain active under all circumstances. Controllers in
hospitals, on oil rigs or at any far corner of the world
can simply never fail. Our engineers are used to de-
signing industrial electronics that remain functional
under heavy circumstances, 24/7 and for many deca-
des in a row. Based on many years of experience we
are able to provide solutions for several industries.
And thanks to a global network of clients, we also
have a world of experience with various standards
(CE, UL-CSA, etc.) We can therefore easily state that
creating designs to accomplish ‘zero service’ quality
levels is in our genes. We consider all specific requi-
rements of the product from the draft of the design.
Our internal testing facilities (EMC pre-compliance,
temperature, humidity and vibrations) considerably
reduce development
througput time and
also enable us to
offer excellent ser-
vice during your
product’s entire life
cycle.
Our test facilities include the following components:
• EMC pre-compliance
• Temperature and humidity testing
- IEC 60068-2-1: Cold test
- IEC 60068-2-2: Dry heat test
- IEC 60068-2-14:Test Nb:
gradual change of temperature test
- IEC 60068-2-30: Damp heat, cyclic (12 + 12h cycle)
- IEC 60068-2-78: Damp heat, steady state
• Vibration tests
- IEC 60068-2-6: Sine vibration
- IEC 60068-2-27: Shock
- IEC 60068-2-64: Random vibration
• Salt Mist tests
- IEC 60068-2-11: Salt spray
2
Visit PsiControl Mechatronics at the Midest 2010
(hall 6, standT185-13, Romanian pavilion)
Early November is the time for the 40th edition of the MIDEST, the most
important industrial fair for supplier companies. PsiControl Mechatronics
is sure to participate in this annual major event for industrial suppliers.
Together with our Romanian subsidiary PsiControl Mechatronics Srl we
will take the opportunity to highlight our subcontracting expertise in Elec-
tronic Manufacturing Services (EMS),and to draw specific attention to our
expertise in production and logistics provision of cables, electronic circuits
and complete mechatronics modules. We will also introduce the combi-
nation of our controller with several motorizations (step-by-step engines,
actuators, etc). And one of the latest developments we intend to show
in this respect is the sensorless homing motor control software. MIDEST
2010 will take place fromTuesday 2 November to Friday 5 November in
Hall 6 of the Paris-NordVillepinte Exhibition Centre.
For further information please visit www.midest.com.
www.midest.com
2nd > 5th
NOVEMBER
Paris Nord Villepinte - France
The world’s leading industrial subcontracting show