Variant of first lab. How to generate a visual distress signal (what is popularly known as SOS)

1. Arduino Lab 1.1
LED Pattern - SOS

2. Pre-requisite
Arduino Lab 1.0
Same material, installation
Understanding of
- setup,
- loop,
- output,
- delay
- digitalWrite,pinMode
- High, Low

3. Setup
Define Pin 13 as LED
Set it as Output
Use a variable I
#define LED 13
int I;
void setup()
{
pinMode(LED,OUTPUT);
}

4. Loop
Blink led for 3 times. Each blink is for
100 msec
Blink led for 3 times. Each blink is for
300 msec now.
Remain in loop
This is SOS
dot-dot-dot-dash-dash-dash-dot-dot-dot......

5. Loop
void loop()
{
for(I=0;I<3;++I)
{
digitalWrite(LED,HIGH);
delay(100);
digitalWrite(LED,LOW);
delay(100);
}
for(I=0;I<3;++I)
{
digitalWrite(LED,HIGH);
delay(500);
digitalWrite(LED,LOW);
delay(500);
}
}

6. Logic
Well, part of the program is same as
first except that it is executed only for
3 times
and then it moves to next step which is
same except that delay is more and
again repeated for three times
And then back to previous step
Result is morse code for SOS

7. Query
You hear Morse code for SMS almost
every day for last so many years.
Guess where?

8. Contact Me
Have more ideas, queries, suggestions?
Contact me at -
Vinay Chaddha
email : vinay@open-embedded.info
SMS : 9811074026
know more about me at visualcv.com/
gvc3065

9. Check us online
Join our facebook page at
facebook.com/open.embedded
Buy products from myworld.ebay.in/
open.embedded