Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.

Flat crush test fixture and cutter

4 Aufrufe

Veröffentlicht am

The Flat Crush Test evaluates the resistance of flutes in corrugated board to a crushing force applied perpendicular to the surface of the board. Low flat crush values may reflect poor formation of the corrugations, Substandard materials, or damage to the corrugations after they are formed.
The Flat Crush Test requires the use of the Flat Crush Test Fixture to prevent lateral movement of the upper portion of the test piece during compressions and also the Flat Crush Test Cutter which can cut through the corrugated structure, leaving clean cut edges at right angles to the faces.

Veröffentlicht in: Business
  • Als Erste(r) kommentieren

  • Gehören Sie zu den Ersten, denen das gefällt!

Flat crush test fixture and cutter

  1. 1. Manufactured by IDM Instruments Pty. Ltd. Email: idm@idminstruments.com.au Phone: +61 397086885 F0011 – Flat Crush Test Fixture C0032 – Flat Crush Test Cutter Copyright 2020 IDM Instruments Pty Ltd. All Rights Reserved TESTING INSTRUMENTS FOR A MEASURABLE DIFFERENCE... www.idminstruments.com.au/catalogue Issue #1
  2. 2. Corrugated Fibreboard IDM Instruments Pty Ltd. 10 - 11 Colrado Court, Hallam, Victoria 3803, Australia Tel: +61 03 9708 6885 Fax: +61 3 9708 6770 idm@idminstruments.com.au www.idminstruments.com.au Worldwide Supply Copyright 2020 IDM Instruments Pty Ltd. All Rights Reserved Product Description F0011 – Flat Crush Test Fixture C0032 – Flat Crush Test Cutter The Flat Crush Test evaluates the resistance of flutes in corrugated board to a crushing force applied perpendicular to the surface of the board. Low flat crush values may reflect poor formation of the corrugations, Substandard materials, or damage to the corrugations after they are formed. The Flat Crush Test requires the use of the Flat Crush Test Fixture to prevent lateral movement of the upper portion of the test piece during compressions and also the Flat Crush Test Cutter which can cut through the corrugated structure, leaving clean cut edges at right angles to the faces. AS/NZS 1301.429s TAPPI T825 Applications Standards Features • Changeable blades • Easy operation • 4 pin location points Dimensions • F0011: o Height: 62 mm o Radius: 97 mm o Weight: 1.5 kgs • C0032: o Height: 120 mm o Radius: 130 mm o Weight: 2 kgs • Easy to use • Fast results • Accurate Benefits

×