370410176 moshell-commands

Moshell (Basic command)
1. momt ( 전체 MO Tree 파악하기 )
2. moshell 169.254.1.10 , lt all (RBS 접속 )
3. cvcu, cvls, cvset, cvrm, cvmk (cv 관련 )
4. acc 0 manualrestart (Restart RBS )
5. st mme , st fdd , get mme ipaddress ( MME, cell 상태 )
6. st cell , bl , deb ( Cell Block, Unblock )
7. pr AntennaUnit , lpr RfBranch, stde , st riport ( RU 점검 )
8. diff (Compare MO)
9. al , ala , alt ( Alarm Check )
10. lga , lgx, lg ( alarm log 등 log 보기 )
11. get . tac ( tac 확인 )
12. get . earfcn ( Center 주파수 확인 )
13. get . band ( 주파수 Bandwidth 확인 )
14. get . feature ( Feature 확인 )
15. inv ( license State 확인 )
16. get sync ( Clock 상태 확인 )
17. get . ntp NTP (동기 서버 ) 확인
18. get 1 , readclock ( 시간 확인 )
19. ue print -admitted ( 몇 call 결렸는지 확인 )
20. appsh oper , appsh data <{udp|gtp}> <sid> (bearer 정보 )
21. get extemal , get term , get point , get . relation (Handover 확인)
22. get . ipaddress , get . vid (IP Address 및 VLAN ID 확인 )
23. cabr , caba ( 장애발생시 확인 )
24. cabx , lhsh BXP_3_1 fui get vswr ( VSWR 확인 )
25. cabx , lhsh BXP_0_1 warpA read DL_PM_PA0_C0 ( 실재 출력 확인 )
26. get . Power ( 출력 타겟 확인하기 )
27. pr security ( Security 확인 )
28. get systemc ( System constant : customer 공개금지 )
29. get . nooftx , noofrx ( ANT나 전송 모드 선택 )
30. pr anr ( ANR 설정 )
31. license server , get . fingerprint (License 관리 )
32. acc IpAccessHostEt ping (ping 확인 )
33. Statistics DATA
34. get . inac , set Rcs=1 tInactivityTimer ( Inactivity timer )
35. get upgr stat, pr upgrade ( Upgrade 확인 )

ENB03> momt
110328-16:10:46 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/2764
--------------------------------
MO classes under ManagedElement
--------------------------------
ENodeBFunction[1] (systemCreated)
AdmissionControl[1] (systemCreated)
AirIfLoadProfile[0-24]
AnrFunction[1] (systemCreated)
AnrFunctionEUtran[1] (systemCreated)
AnrFunctionGeran[1] (systemCreated)
AnrFunctionUtran[1] (systemCreated)
Cdma2000Network[0-1]
Cdma2000FreqBand[0-18]
Cdma2000Freq[0-64]
ExternalCdma2000Cell[0-64]
EUtraNetwork[1] (systemCreated)
EUtranFrequency[0-24]
ExternalENodeBFunction[0-256]
ExternalEUtranCellFDD[0-24]
ExternalEUtranCellTDD[0-24]
TermPointToENB[0-1]
EUtranCellFDD[0-24]
Cdma2000FreqBandRelation[0-32]
Cdma2000CellRelation[0-64]
Cdma2000FreqRelation[0-64]
EUtranFreqRelation[0-8]
EUtranCellRelation[0-64]
GeranFreqGroupRelation[0-16]
GeranCellRelation[0-64]
UeMeasControl[1] (systemCreated)
PmUeMeasControl[0-1]
ReportConfigA1Prim[1] (systemCreated)
ReportConfigA1Sec[1] (systemCreated)
ReportConfigA5[1] (systemCreated)
ReportConfigA5Anr[1] (systemCreated)
ReportConfigB2Cdma2000[1] (systemCreated)
ReportConfigB2Geran[1] (systemCreated)
ReportConfigB2Utra[1] (systemCreated)
ReportConfigEUtraBadCovPrim[1] (systemCreated)
ReportConfigEUtraBadCovSec[1] (systemCreated)
ReportConfigEUtraBestCell[1] (systemCreated)
ReportConfigEUtraBestCellAnr[1] (systemCreated)
ReportConfigEUtraIntraFreqPm[0-2]
UtranFreqRelation[0-16]
UtranCellRelation[0-64]
EUtranCellTDD[0-24]
Understand the entire MO Tree
DU
RU

[~]$ moshell 169.254.1.10
####################################################################
# Welcome to MoShell 8.0r #
# Finn Magnusson, Jan Pettersson #
# http://utran01.au.ao.ericsson.se/moshell #
# Contact: Finn.Magnusson@ericsson.com #
# David.Smith@ericsson.com #
####################################################################
Checking ip contact...OK
HELP MENU : h
BASIC MO COMMANDS : m
OTHER MO COMMANDS : n
OTHER COMMANDS : o
PM COMMANDS : p
QUIT : q
169.254.1.10> lt all
110323-21:50:44 169.254.1.10 8.0r stopfile=/tmp/2920
Checking MOM version...ERBS_NODE_MODEL_B_1_40
Using MOM version: ERBS_NODE_MODEL_B_1_40_COMPLETE
Parsing MOM (cached): /home/Administrator/moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz .....................................................Done.
Using paramfile /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt
Parsing file /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt ............................................................................Done.
Fetching IOR file...Done.
Connecting to 10.0.0.165:56834 (CorbaSecurity=OFF, corba_class=2, java=1.6.0_23, jacoms=R73D19, jacorb=R73D01)
**** Welcome to the Simple Mo Browser (version 3.0)!
Trying file=C:/cygwin/home/Administrator/moshell_logfiles/logs_moshell/tempfiles/20110323-215038_1808/ior1808
**** Test Construction OK
****
$mobrowser_pid = 3436
Connected to 169.254.1.10 (SubNetwork=ONRM_ROOT_MO_R,SubNetwork=TEST,MeContext=ENB04,ManagedElement=1)
Last MO: 1043. Loaded 1043 MOs. Total: 1044 MOs.
ENB04>
Connect to RBS
1. Have laptop setting same as left.
2. Enter moshell 169.254.1.10 for connection.
3. Enter lt all
1. The above is a access method when you connect directly to LNB PORT in the station.
2. In case of access through LSM, use (10.0.0.163)

ENB02> cvcu
===================================================================================================
110326-10:42 CV Name Upgrade Package Release
===================================================================================================
Startable: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Loaded: RU_SW_Change_R25S-alarmc_cdmaHOcell33 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Executing: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Last created: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
-------------------------------------------------------------------------------------------------------------------
Current UpgradePkg: UpgradePackage=R9AS CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
AutoCreatedCV: Disabled
Countdown status: Deactivated
Ongoing CV activity: 0 (IDLE)
Rollback status: Rollback is off
=================================================================================================
ENB02> cvls
==================================================================================================
110326-10:42 CV Name Upgrade Package Release
==================================================================================================
Startable: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Loaded: RU_SW_Change_R25S-alarmc_cdmaHOcell33 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Executing: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Last created: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
-------------------------------------------------------------------------------------------------------------------
Current UpgradePkg: UpgradePackage=R9AS CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
AutoCreatedCV: Disabled
Countdown status: Deactivated
Ongoing CV activity: 0 (IDLE)
Rollback status: Rollback is off
===================================================================================================
UP name ProductData CVs LMs PrDate LastCV state Release CompatIndex
===================================================================================================
InitialUP 0_0 0 0 0 IDLE, ONLY_DELETEABLE
Virtual_2_of_CXP102051/10_R5EA CXP102051/10_R5EA 0 0 100906 IDLE, ONLY_DELETEABLE L11A
Virtual_0_of_CXP102051/12_R8AA CXP102051/12_R8AA 1 0 110216 110314 IDLE, ONLY_DELETEABLE L11B
Virtual_1_of_CXP102051/12_R7AK CXP102051/12_R7AK 4 0 110203 110315 IDLE, ONLY_DELETEABLE L11B (LSV59.3-3-CPP_8.0.2)
R9BE%2 CXP102051/10_R9BE/2 29 192 101207 110323 IDLE, UPGRADE_COMPLETED L11A.0.1.0 (EP30-CPP_8.0.0.3) CXP102051%1-R4
R9AS CXP102051/12_R9AS 16 200 110303 110325 IDLE, UPGRADE_COMPLETED L11B (LSV59.3-4-CPP_8.0.2) CXP102051%1-R4
==================================================================================================
CV Name Creation Date UpgradePackage Release Type Operator Comment
==================================================================================================
BasicCV_CXP102106%10_R9BE%2 2010-12-07 13:28 CXP102051/10_R9BE/2 L11A.0.1.0 other unknown none
LTE_Initial 2010-12-07 13:33 CXP102051/10_R9BE/2 L11A.0.1.0 other ProductionTest ProductionTest
L11A-artiza-vlanoff 2011-03-01 02:26 CXP102051/10_R9BE/2 L11A.0.1.0 other cwcho none
===================================================================================================
>>> Total: 50 CV's, 6 UP's
ENB03>
CV
※ What is CV ?
Similar to system restoration point of Windows.
It has all Parameter and Version information for rollback
to the previous status promptly in case of failure to
reduce no service time. ( Maximum number of CVs
stored in each station is 50.)
CV type: Manual rollback point (Made by user)
Installation rollback point (Automatically
created during upgrade)
System rollback point (Automatically
created by system)
Startable : Display CV activated at the time of reset
Loaded :
Executing : Display CV currently in operation
Last created : Display CV created most recently
1. Current CV check: cvcu
2. Entire CV check: cvls
3. CV change: cvset ( Select certain CV among saved
4. CV creation: cvmk
5. CV deletion: cvrm
6. CV creation & startable change: cvms
7. reset: acc 0 manualrestart <┛
y <┛
3 <┛
0 <┛
0 <┛
6. pol 5 5 <┛

Restart RBS
ENB03> acc 0 manualrestart
The node has been restarted on a different CV: from OptimizedUDPDL2 to selfconfig_autocreated2.
Rereading MOM and MIB...
Last MO: 835. Loaded 835 MOs. Total: 836 MOs.
Checking MOM version...ERBS_NODE_MODEL_B_1_40
Using MOM version: ERBS_NODE_MODEL_B_1_40_COMPLETE
Parsing MOM (cached): /home/Administrator/moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz ....................................................Done.
Parsing file /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt ...........................................................................Done.
Call Action manualrestart on following 1 MOs ?
===================================================================================
0 ManagedElement=1
INFO: The RBS node ENB03 will be restarted on CV: selfconfig_autocreated2
===================================================================================
Call action manualrestart on 1 MOs. Are you Sure [y/n] ? y
================================================================================================================
Proxy MO Action Nr of Params
================================================================================================================
0 ManagedElement=1 manualRestart 3
Parameter 1 of 3, restartRank (enumRef-RestartRank):
Enter one of the following integers: 0:RESTART_WARM, 1:RESTART_REFRESH, 2:RESTART_COLD, 3:RESTART_COLDWTEST: 3
Parameter 2 of 3, restartReason (enumRef-RestartReason):
Enter one of the following integers: 0:PLANNED_RECONFIGURATION, 1:UNPLANNED_NODE_EXTERNAL_PROBLEMS, 2:UNPLANNED_NODE_UPGRADE_PROBLEMS, 3:UNPL
ANNED_O_AND_M_ISSUE, 4:UNPLANNED_CYCLIC_RECOVERY, 5:UNPLANNED_LOCKED_RESOURCES, 6:UNPLANNED_COLD_WITH_HW_TEST,
7:UNPLANNED_CALL_PROCESSING_DEGRA DATION, 8:UNPLANNED_LOW_COVERAGE, 30:UPGRADE_BOARD_RESTART: 0
Parameter 3 of 3, restartInfo (string): 0
>>> Return value = null
===============================================================================================================
Total: 1 MOs attempted, 1 MOs actioned
ENB03>
ENB03> pol 5 5
Waiting 5 seconds before starting to poll...
No contact to port 80, retrying in 1 second...
CORBA.OBJECT_NOT_EXIST Polling for 0m41s, MO service not ready, retrying in 5 seconds...
MO service is ready.
ENB03>
1. acc 0 manualrestart
2. y
3. 3
4. 0
5. 0
pol 5 5
Use it when you want to know
when the signal resumes after
disconnection.
pol 5: interval 5: wait time
169.254.1.10> polu 5 5
110331-12:35:07 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_30_COMPLETE
stopfile=/tmp/2168
No ongoing activity on the UpgradePackage MOs.
169.254.1.10> pol 5 5
stopfile=/tmp/2168
MO service is ready.
169.254.1.10>

eNB3> lst mme
110310-16:38:07 10.0.0.164 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/4728
===================================================================================
Proxy Adm State Op. State MO
===================================================================================
536 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,TermPointToMme=LGERMME01
===================================================================================
Total: 1 MOs
eNB3> lst fdd
===================================================================================
===================================================================================
854 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtranCellFDD=33
879 0 (LOCKED) 0 (DISABLED) ENodeBFunction=1,EUtranCellFDD=32
===================================================================================
Total: 3 MOs
eNB3> st sector
===================================================================================
===================================================================================
1030 1 (UNLOCKED) 0 (DISABLED) SectorEquipmentFunction=S1
1036 1 (UNLOCKED) 1 (ENABLED) SectorEquipmentFunction=S3
===================================================================================
Total: 3 MOs
eNB3> get mme ipaddress
=================================================================================================================
MO Attribute Value
=================================================================================================================
TermPointToMme=LGERMME01 ipAddress1 4.2.0.132
TermPointToMme=LGERMME01 usedIpAddress 4.2.0.132
=================================================================================================================
Total: 1 MOs
MME , CELL Status
To check MME status
Check CELL status
Same command lst cell
MME Node addition method
cr ENodeBFunction=1,TermPointToMme=LGERMME02
lget ENodeBFunction=1,TermPointToMme=LGERMME02
lset ENodeBFunction=1,TermPointToMme=LGERMME02 ipAddress1 xxx.xxx.xxx.xxx
deb LGERMME02
MME IP modification method (From
station side)
ENB03> get mme ip
ENB03> bl mme
ENB03> set mme ipAddress1 100.100.100.150
ENB03> deb mme
ENB03> lst mme

ENB03> st cell
===================================================================================
===================================================================================
147 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=bb-1,CellDeviceSet=1
===================================================================================
ENB03> deb 879
Deblock following 1 MOs ?
===================================================================================
879 ENodeBFunction=1,EUtranCellFDD=32
===================================================================================
Deblock 1 MOs. Are you Sure [y/n] ? y
====================================================================================
Id MO administrativeState Result
====================================================================================
879 EUtranCellFDD=32 1 >>> Set.
====================================================================================
Total: 1 MOs attempted, 1 MOs set
ENB03> bl 879
Block following 1 MOs ?
===================================================================================
879 ENodeBFunction=1,EUtranCellFDD=32
===================================================================================
Block 1 MOs. Are you Sure [y/n] ? y
Block, Unblock
Unblock Cell no. 32, currently
blocked.
Check Cell status.
Block Cell no. 32, currently
unblocked.

RU Check
ENB03> lk fdd
===============================================================================
Proxy Adm State Op. State MOs linked to 476:EUtranCellFDD=31
===============================================================================
476 1 (UNLOCKED) 0 (DISABLED) EUtranCellFDD=31
477 EUtranCellFDD=31,UeMeasControl=1
480 EUtranCellFDD=31,UeMeasControl=1,ReportConfigEUtraBestCell=1
479 EUtranCellFDD=31,UeMeasControl=1,ReportConfigEUtraBadCovSec=1
478 EUtranCellFDD=31,UeMeasControl=1,ReportConfigEUtraBadCovPrim=1
147 AntennaUnitGroup=1,RfBranch=1
149 AntennaUnitGroup=1,RfBranch=2
123 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,RiPort=DATA_1
126 1 (UNLOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=A
130 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=B
138 1 (UNLOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=A
141 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=B
127 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=RXA_IO
125 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=RXB_IO
140 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=RXA_IO
142 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=RXB_IO
===============================================================================
Total: 20 MOs
eNB3> st aux
===============================================================================
===============================================================================
122 1 (UNLOCKED) 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1
===============================================================================
Total: 2 MOs
eNB3> st ru
===============================================================================
===============================================================================
63 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,GeneralProcessorUnit=1
124 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru
136 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru
===============================================================================
Total: 5 MOs
eNB3> lh ru vii
110331-15:41:29 169.254.1.10 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/
Please enter Node Password:
Checking available boards on node...
...
Created following board-groups: all, allp, mp, bp, tu, coremp, ommp, scb, sxb, scx, sccpmp
, et, etmfg, etmfx, aal2ap, aal2ncc, aal2cpsrc, aal2rh, xp, rax, tx,gcpu.
>>> Type "bp" to view available board-groups and "bp <group>" to view group contents.
============================================================
$ lhsh BXP_0_1 vii
BXP_0_1: Indicated states:
BXP_0_1: Red:
BXP_0_1: Default (off)
BXP_0_1: Green:
BXP_0_1: Default (steady light)
BXP_0_1: Yellow:
===========================================================
$ lhsh BXP_3_1 vii
BXP_3_1: Indicated states:
BXP_3_1: Red:
BXP_3_1: Green:
BXP_3_1: Default (steady light)
BXP_3_1: Yellow:
$

ENB03> st de
===================================================================================
===================================================================================
119 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,DeviceGroup=dul
146 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=bb-1
147 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=bb-1,CellDeviceSet=1
160 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=du-1
161 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=du-1,RicmDeviceSet=1
211 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru
213 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,TrDeviceSet=tr
===================================================================================
Total: 17 MOs
ENB03> st riport
===================================================================================
===================================================================================
126 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=B
127 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=C
136 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=E
139 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
142 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
157 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=F
209 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_1
210 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_2
===================================================================================
Total: 18 MOs
RU Check

RU Check
ENB03> pr AntennaUnit
===================================================================================
Proxy MO
===================================================================================
184 Equipment=1,AntennaUnitGroup=1
187 Equipment=1,AntennaUnitGroup=1,AntennaUnit=1
===================================================================================
Total: 6 Mos
ENB03> pr rfport
===================================================================================
Proxy MO
===================================================================================
212 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=RXB_IO
215 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=B
216 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=A
217 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=RXA_IO
===================================================================================
Total: 24 Mos
ENB03> pr branch
===================================================================================
Proxy MO
===================================================================================
185 Equipment=1,AntennaUnitGroup=1,RfBranch=2
===================================================================================
Total: 6 MOs
AntennaUnitGroup MO

ENB03> st fdd
===================================================================================
===================================================================================
===================================================================================
Total: 3 MOs
ENB03> diff 854 879
=====================================================================================================
MO EUtranCellFDD=33 EUtranCellFDD=32
=====================================================================================================
redirectionInfoRefPrio1 Cdma2000Network=1,Cdma2000FreqBand=1,Cdma2000Freq=400
sectorFunctionRef SectorEquipmentFunction=S3 SectorEquipmentFunction=S2
mappingInfo.mappingInfo SIB8 1 (MAPPED_SI_1) 0 (NOT_MAPPED)
EUtranCellFDDId 33 32
administrativeState 1 (UNLOCKED) 0 (LOCKED)
availabilityStatus 0 (NO_STATUS) 8 (OFF_LINE)
noOfUsedTxAntennas 1 -1
operationalState 1 (ENABLED) 0 (DISABLED)
physicalLayerCellIdGroup 11 10
cellId 33 32
physicalLayerSubCellId 0 2
=====================================================================================================
Compare MO

ENB02> al
Resolving the alarm service in OMS...
Simple Alarm Client initialized...
Starting to retrieve active alarms
Nr of active alarms are: 9
================================================================================================
Sever Specific Problem Cause Mo-Reference
================================================================================================
Maj Disconnected equipment_malfunction HwUnit=SCU
Maj ResourceAllocationFailure configuration_or_customizing_error EUtranCellFDD=21
Maj TU Synch Reference Loss of Signal loss_of_signal Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
Min Emergency Unlock of Software Licensing alarm_indication_signal Licensing=1
Min HwFault equipment_malfunction Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
Min HwFault equipment_malfunction Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
Min Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
>>> Total: 9 Alarms (0 Critical, 5 Major)
ENB02> ala
Resolving the alarm service in OMS...
Simple Alarm Client initialized...
Starting to retrieve active alarms
Nr of active alarms are: 9
================================================================================================
Sever Specific Problem Cause Mo-Reference
================================================================================================
Maj Disconnected equipment_malfunction HwUnit=SCU
Maj TU Synch Reference Loss of Signal loss_of_signal Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
Min Emergency Unlock of Software Licensing alarm_indication_signal Licensing=1
Min HwFault equipment_malfunction Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
Min HwFault equipment_malfunction Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
Min Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
Alarm Id : SubNetwork=ONRM_ROOT_MO_R,SubNetwork=TEST,MeContext=ENB02_4
Event Time : 2011. 3. 10 $ 9:51:13
Perceived Severity : Major
Check Alarm
Brief check of Alarm al
Detailed check of Alarm ala
Check Alarm by the hour alt

ENB03> lga
Startdate=19661031.231320, Enddate=20110329.074624
....................Get /c/logfiles/alarm_event/ALARM_LOG.xml /home/Administrator/moshell_logfiles/logs_moshell/tempfiles/20110328-161024_2612/alarmLog2
764.xml ... OK
=======================================================================================================
Timestamp (UTC) S Problem Cause MO-reference
=======================================================================================================
2011-03-28 01:53:03 AL m Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
2011-03-28 02:42:20 AL * Synch Reference Not Reliable clock_synchronisation_problem Synchronization=1
2011-03-28 02:42:20 AL * Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
2011-03-28 05:52:58 AL M ServiceUnavailable underlying_resource_unavailable EUtranCellFDD=31
2011-03-28 05:53:37 AL * ServiceUnavailable underlying_resource_unavailable EUtranCellFDD=31
2011-03-28 06:23:23 AL M TU Synch Reference Loss of Signal loss_of_signal
Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
2011-03-28 06:23:47 AL M Synch Reference Not Reliable clock_synchronisation_problem Synchronization=1
2011-03-28 06:24:31 AL * Synch Reference Not Reliable clock_synchronisation_problem Synchronization=1
2011-03-28 06:27:18 AL M System Clock in Holdover Mode replaceable_unit_problem Synchronization=1
ENB03> lg
***************************************************************************************
lg[acdefghilmnopqrstuvwxyz] [-l <logdirectory|logfile|zipfile>] [-m <minustime>] [-p <plustime>] [-s <startdate>] [-e <enddate>] [-g
<boardgroup >] [-n <nodefilter>] [|<unixcmds>]
***************************************************************************************
Fetching and processing of node logs
All options can be combined together, except options "d","w","x","f" which can only be combined with the options "r" and "c".
Log Options:
************
- a: Alarm log (ALARM_LOG.xml). History of alarms raising and ceasing.
- x: Active alarms (ALARM_LOG.xml). Snapshot of alarms active on a specific date/time given in -m/-s option.
- e: Event log (EVENT_LOG.xml). History of MO events.
- v: Availability log (CELLO_AVAILABILITY2_LOG.xml). History of node/board/program restarts.
- s: System log (/c/logfiles/systemlog). History of node/board/program restarts.
- p: Post Mortem Dumps (/c/pmd) and LTE ENodeB error files (/c/logfiles/troubleshooting/error). History of board/program crashes. PMD files are
saved permanently in moshell_logfiles/logs_moshell/pmdfiles/<nodeaddress>/pmd .
- u: Upgrade log (Trace.log and Trace.log_old). History of system upgrades.
- d: Downtime log. History of node outages.
- o: MO command log (CORBA_AUDITTRAIL_LOG.xml). History of MO write commands (set/action/create/delete).
- q: MO command log in "trun" format (CORBA_AUDITTRAIL_LOG.xml). Useful for recovering configuration data which was not saved to CV before node
Check log

ENB03> get . tac
==========================================================================================================
=======
MO Attribute Value
==========================================================================================================
=======
Security=1 targetMonitorPortActive true
EUtraNetwork=1,ExternalENodeBFunction=Samsung,ExternalEUtranCellFDD=4506-18-1 tac 4
EUtraNetwork=1,ExternalENodeBFunction=Samsung,ExternalEUtranCellFDD=4506-18-2 tac 4
EUtraNetwork=1,ExternalENodeBFunction=Samsung,ExternalEUtranCellFDD=Samsung tac 4
EUtraNetwork=1,ExternalENodeBFunction=NSN,ExternalEUtranCellFDD=NSN tac 52
EUtraNetwork=1,ExternalENodeBFunction=ENB02,ExternalEUtranCellFDD=4506-2-21 tac 4
EUtraNetwork=1,ExternalENodeBFunction=ENB02,ExternalEUtranCellFDD=4506-2-22 tac 4
EUtraNetwork=1,ExternalENodeBFunction=ENB02,ExternalEUtranCellFDD=ENB02 tac 4
EUtraNetwork=1,ExternalENodeBFunction=1,ExternalEUtranCellFDD=43 tac 4
EUtraNetwork=1,ExternalENodeBFunction=1,ExternalEUtranCellFDD=42 tac 4
EUtraNetwork=1,ExternalENodeBFunction=1,ExternalEUtranCellFDD=4506-4-41 tac 4
EUtranCellFDD=33 dlInterferenceManagementActive true
EUtranCellFDD=33 tac 2
EUtranCellFDD=33 ulInterferenceManagementActive true
==========================================================================================================
=======
Total: 14 Mos
ENB04> eset1 EUtranCellFDD tac 4
Set following 3 attributes?
============================================================================================================
762 EUtranCellFDD=41 tac
============================================================================================================
Set 3 attributes. Are you Sure [y/n] ? y
============================================================================================================
=====
Id MO Attribute Value Result
============================================================================================================
=====
762 EUtranCellFDD=41 tac 3 >>> Set.
784 EUtranCellFDD=43 tac 3 >>> Set.
Check Tac
TAC : Tracking Area Code

ENB04> get . earfcn
110322-21:48:28 10.0.0.165 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/2744
=================================================================================================================
MO Attribute Value
=================================================================================================================
EUtranCellFDD=41 earfcndl 2600
EUtranCellFDD=41 earfcnul 20600
=================================================================================================================
Total: 3 MOs
Check Center frequency
Check frequency allocation
information
LGU+ Center Frequency
889.0Mhz(DL) : 2600
844.0Mhz(UL) : 20600
set EUtranCellFDD earfcnul 21400
set EUtranCellFDD earfcndl 3400
LGU+ Center Freq
889.0Mhz(DL) : 2600
844.0Mhz(UL) : 20600
set EUtranCellFDD earfcnul 20600
set EUtranCellFDD earfcndl 2600
Attribute 1 of 8, earfcndl (long): 3400
Attribute 2 of 8, earfcnul (long): 21400

ENB02> get . band
=================================================================================================
MO Attribute Value
=================================================================================================
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz CapacityChannelBandwidthId 10MHz
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz capacityUnitChannelBandwidth Number of 10000kHz licenses
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz keyIdChannelBandwidth CXC4010718
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz licenseCapacityChannelBandwidth 1
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz licenseStateChannelBandwidth 1 (ENABLED)
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz CapacityChannelBandwidthId 15MHz
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz capacityUnitChannelBandwidth Number of 15000kHz licenses
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz keyIdChannelBandwidth CXC4010719
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz licenseCapacityChannelBandwidth 1
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz licenseStateChannelBandwidth 1 (ENABLED)
Licensing=1,CapacityLicenses=1,UlBasebandCapacity=1 UlBasebandCapacityId 1
ENodeBFunction=1 dlTransNwBandwidth 1000
ENodeBFunction=1 ulTransNwBandwidth 1000
EUtraNetwork=1,ExternalENodeBFunction=4506-3,ExternalEUtranCellFDD=4506-3-31 dlChannelBandwidth 10000
EUtraNetwork=1,ExternalENodeBFunction=4506-3,ExternalEUtranCellFDD=4506-3-31 ulChannelBandwidth 10000
EUtranCellFDD=21 dlChannelBandwidth 10000
EUtranCellFDD=21 prsBandwidth 4 (N100)
EUtranCellFDD=21 ulChannelBandwidth 10000
EUtranCellFDD=22,EUtranFreqRelation=3 allowedMeasBandwidth 6
Cdma2000Network=1,Cdma2000FreqBand=1 Cdma2000FreqBandId 1
Cdma2000Network=1,Cdma2000FreqBand=1 hrpdBandClass 4 (BAND_CLASS_4)
AdmissionControl=1 dlTransNwBandwidth 1000
AdmissionControl=1 ulTransNwBandwidth 1000
SectorEquipmentFunction=S1 fqBand 0
================================================================================================
Total: 24 MOs
Check frequency bandwidth
Use for frequency Bandwidth
check
Downlink to no. 21 Cell
downlink bandwidth is
10Mhz
Uplink to no. 21 Cell
bandwidth is 10Mhz
Bandwidth change
get . dlchannel
get . ulchannel
lst cell
bl 865
set EUtranCellFDD=31 dlChannelBandwidth 5000
set EUtranCellFDD=31 ulChannelBandwidth 5000
get . Channelband
lst cell
deb 865
get 865

ENB02> get . feature
==========================================================================================
MO Attribute Value
==========================================================================================
Licensing=1,OptionalFeatures=1 OptionalFeaturesId 1
Licensing=1,OptionalFeatures=1,SharedNetworkSupport=1 featureStateSharedNetworkSupport 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Dl64Qam=1 featureStateDl64Qam 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,MixedMode=1 featureStateMixedMode 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,IntraLTEHandover=1 featureStateIntraLTEHandover 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,CsfbForLimitedDualRadioUE=1 featureStateCsfbForLimitedDualRadioUE 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,AirIfLoadGenerator=1 featureStateAilg 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RetSupport=1 featureStateRetSupport 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Anr=1 featureStateAnr 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Aisgv2FwDownload=1 featureStateAisgv2FwDownload 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,InterFrequencyLTEHandover=1 featureStateInterFrequencyLTEHandover 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,Irc=1 featureStateIrc 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,MultiErabsPerUser=1 featureStateMultiErabsPerUser 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,WcdmaSessionContinuity=1 featureStateWcdmaSessionContinuity 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RbsEventStreamer=1 featureStateEventStreaming 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,OtdoaSupl=1 featureStateOtdoaSupl 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RlcUm=1 featureStateRlcUm 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,PmInitiatedUeMeasurements=1 featureStatePmInitiatedUeMeasurements 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,TimeAndPhaseSynchWithGPS=1 featureStateTimeAndPhaseSynchWithGPS 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,AgpsSupl=1 featureStateAgpsSupl 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,InterFrequencySessionContinuity=1 featureStateInterFrequencySessionContinuity 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,UePosCellId=1 featureStateCellId 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RetCascading=1 featureStateRetCascading 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,VswrSupervision=1 featureStateVswrSupervision 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,DualAntDlPerfPkg=1 featureStateDualAntDlPerfPkg 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,IntraLTEHODataFwd=1 featureStateIntraLTEHODataFwd 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,GsmSessionContinuity=1 featureStateGsmSessionContinuity 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,TmaSupport=1 featureStateTmaSupport 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Cdma2000SessionContinuity=1 featureStateCdma2000SessionContinuity 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RetConfigurationMgt=1 featureStateRetConfigurationMgt 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,MaximumCellRange=1 featureStateMaximumCellRange 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,QosAwareScheduler=1 featureStateQosAwareScheduler 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,CsfbToGsmWcdma=1 featureStateCsfbToGsmWcdma 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Drx=1 featureStateDrx 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,EcsCsfb=1 featureStateEcsCsfb 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Ul16Qam=1 featureStateUl16Qam 1 (ACTIVATED)
IpSec=1 featureState 0 (DEACTIVATED)
=========================================================================================
Total: 37 MOs
Check Feature (Major functions)
Status check command to see if Feature(major functions) are
ACTIVATED or DEACTIVATED
For example) Certain function
(ANR : Auto Neighbor
relation) is DEACTIVATED,
thus will not work.
When the function is
DEACTIVATED, it is impossible to
have MIMO configuration.
When the function is
DEACTIVATED, SIB5 doesn’t go
down.

ENB02> inv
=================================================================================================================
Feature keyId licenseState featureState serviceState description
=================================================================================================================
AgpsSupl=1 CXC4010963 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
AirIfLoadGenerator=1 CXC4010955 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
Aisgv2FwDownload=1 CXC4011036 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
Anr=1 CXC4010620 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) Automated Neighbour Relations
Cdma2000SessionContinuity=1 CXC4010614 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) CDMA2000 Session continuity, coverage triggered
CsfbForLimitedDualRadioUE=1 CXC4010949 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
CsfbToGsmWcdma=1 CXC4010956 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
Dl64Qam=1 CXC4010610 1 (ENABLED) 1 (ACTIVATED) 1 (OPERABLE) 64-QAM DL
Drx=1 CXC4010912 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
DualAntDlPerfPkg=1 CXC4010609 1 (ENABLED) 1 (ACTIVATED) 1 (OPERABLE) Dual Antenna DL Performance Package
EcsCsfb=1 CXC4011034 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
GsmSessionContinuity=1 CXC4010618 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) GERAN Session continuity, coverage triggered
SharedNetworkSupport=1 CXC4010960 0 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
TimeAndPhaseSynchWithGPS=1 CXC4010917 0 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
TmaSupport=1 CXC4010621 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) TMA Support
UePosCellId=1 CXC4010841 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
Ul16Qam=1 CXC4010611 1 (ENABLED) 1 (ACTIVATED) 1 (OPERABLE) 16-QAM UL
VswrSupervision=1 CXC4010799 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) VSWR
WcdmaSessionContinuity=1 CXC4010616 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) WCDMA Session continuity, coverage triggered
===============================================================================================================
===============================================================================================================
Capacity keyId licenseState licenseCapacity capacityUnit hardLimit percentileConf
===============================================================================================================
ChannelBandwidth=10MHz CXC4010718 1 (ENABLED) 1 Nr of 10000kHz licenses
ChannelBandwidth=1p4Mhz CXC4010721 0 (DISABLED) 0 Nr of 1400kHz licenses
ChannelBandwidth=3MHz CXC4010722 0 (DISABLED) 0 Nr of 3000kHz licenses
ConnectedUsers=1 CXC4010608 1 (ENABLED) 500 Nr of Connected Users 200 90
DlBasebandCapacity=1 CXC4010623 1 (ENABLED) 173 Mbit/s 65535 90
DlPrbCapacity=1 CXC4011039 1 (ENABLED) 65535 Nr of PRBs 65535 90
OutputPower=40Watt CXC4010625 1 (ENABLED) 6 Nr of 40 Watt Licenses
OutputPower=60Watt CXC4010626 1 (ENABLED) 6 Nr of 60 Watt Licenses
UlBasebandCapacity=1 CXC4010624 1 (ENABLED) 56 Mbit/s 65535 90
UlPrbCapacity=1 CXC4011040 1 (ENABLED) 65535 Nr of PRBs 65535 90
================================================================================================================
Check license State
Use for License Status Check

ENB02> get sync
=================================================================================================================
39 SystemFunctions=1,Licensing=1,OptionalFeatures=1,TimeAndPhaseSynchWithGPS=1
=================================================================================================================
TimeAndPhaseSynchWithGPSId 1
featureStateTimeAndPhaseSynchWithGPS 0 (DEACTIVATED)
keyIdTimeAndPhaseSynchWithGPS CXC4010917
licenseStateTimeAndPhaseSynchWithGPS 0 (DISABLED)
serviceStateTimeAndPhaseSynchWithGPS 0 (INOPERABLE)
=================================================================================================================
60 TransportNetwork=1,Synchronization=1
=================================================================================================================
SynchronizationId 1
degradationIsFault 0 (DEGR_NOT_FAULT)
nodeSystemClock 2 (LOCKED_MODE)
syncRefActivity i[8] = 1 2 1 1 1 1 1 1
syncRefPriority i[8] = 1 2 0 0 0 0 0 0
syncRefStatus i[8] = 0 3 0 0 0 0 0 0
syncReference [8] =
>>> syncReference = Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
>>> syncReference = IpSystem=1,IpAccessHostEt=1,IpSyncRef=1
>>> syncReference =
>>> syncReference =
>>> syncReference =
>>> syncReference =
>>> syncReference =
>>> syncReference =
userLabel
=================================================================================================================
114 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
=================================================================================================================
TuSyncRefId GPS
administrativeState 1 (UNLOCKED)
availabilityStatus 2 (FAILED)
operationalState 0 (DISABLED)
reservedBy [1] =
>>> reservedBy = TransportNetwork=1,Synchronization=1
userLabel
=================================================================================================================
960 IpSystem=1,IpAccessHostEt=1,IpSyncRef=1
=================================================================================================================
IpSyncRefId 1
administrativeState 1 (UNLOCKED)
availabilityStatus 0 (NO_STATUS)
cachedIpAddress
ntpServerIpAddress 172.30.108.217
operationalState 1 (ENABLED)
reservedBy [1] =
>>> reservedBy = TransportNetwork=1,Synchronization=1
syncStatus 2 (OK)
userLabel
=================================================================================================================
Total: 4 MOs
값 상태
0 UNKNOWN_MODE
1 STARTUP_MODE
2 LOCKED_MODE
3 HOLD_OVER_MODE
4 FREE_RUNNING_MODE
5 FAILED_MODE
6 LOSS_OF_TRACKING_MODE
7 NOT_APPLICABLE
Check Clock status
Set Priority
값 상태
0 FAILED
1 DEGRADED
2 LOSS_OF_TRACKING
3 OK
4 REF_PATH_FAILED_A
5 REF_PATH_FAILED_B
6 NOT_RELIABLE
7 LOW_QUALITY
3 Normal Lock status
ACTIVE : 2, INACTIVE : 1
값 상태
0 NO_STATUS
1 IN_TEST
2 FAILED
4 POWER_OFF
8 OFF_LINE
16 OFF_DUTY
64 DEGRADED
128 NOT_INSTALLED
256 LOG_FULL
544 DEPENDENCY_LOCKED
1056 DEPENDENCY_FAILED
2080 DEPENDENCY_SHUTTINGDOWN
Free Running→ Loss of tracking
LOCK → Hold over →
No impact on calls Cell operation stat disable

Check Sync data
0 UNKNOWN_MODE
1 STARTUP_MODE
The system clock is starting up.
2 LOCKED_MODE
The system clock signal on the Timing Unit is locked: a synchronization
reference is used to generate the system clock, the clock accuracy is 50 ppb
or better.
3 HOLD_OVER_MODE
The system clock signal on the Timing Unit has holdover quality: no
synchronization reference is used to generate the system clock, the clock
accuracy is 50 ppb or better.
4 FREE_RUNNING_MODE
The system clock signal on the Timing Unit is free-running: no
synchronization reference is used to generate the system clock, the clock
accuracy is 4.6 ppm or better.
5 FAILED_MODE
The system clock signal on the Timing Unit is failed: there is fault in
generating the system clock, no guarantee of clock accuracy level.
6 LOSS_OF_TRACKING_MODE
The frequency of the system clock is at its upper or lower limit.
7 NOT_APPLICABLE
The system clock signal on Timing Unit is not applicable: the TUB or the CBU
is not present.
0 FAILED
Synchronization reference cannot perform its required tasks.
1 DEGRADED
Capability of the synchronization reference to perform its required tasks is
degraded, for example, because of high bit error rate. This value is applicable
only for synchronization references that carry traffic, that is, for ET physical
path terminations.
2 LOSS_OF_TRACKING
The algorithm for system clock regulation cannot follow the synchronization
reference signal either because of the poor quality of the signal or because of
a HW fault.
3 OK
Synchronization reference is capable of performing its required tasks.
4 REF_PATH_FAILED_A
Synchronization reference cannot be distributed on plane A.
5 REF_PATH_FAILED_B
Synchronization reference cannot be distributed on plane B.
6 NOT_RELIABLE
No NTP packets are received from the server. This value is only used for IP
synchronization references.
7 LOW_QUALITY
The time stamp packets received from the NTP server are not reliable and the
synchronization algorithm cannot lock to IP reference. This value is only used
for IP synchronization references.
0 NO_STATUS
No other availability status for this resource is currently present.
1 IN_TEST
The resource is undergoing a test procedure. Tests that do not exclude additional users can be present in any operational sta te or administrative state.
2 FAILED
The resource has an internal fault that prevents it from operating. The operational state is disabled.
4 POWER_OFF
The resource requires power to be applied and is not powered on. The operational state is disabled.
8 OFF_LINE
The resource requires a routine operation to be performed to place it online and make it available for use. The operation may be manual, automatic, or both. The
operational state is disabled or enabled.
16 OFF_DUTY
The resource has been made inactive by some internal control process in accordance with a predetermined time schedule. Under normal conditions the control process
can be expected to reactivate the resource at some scheduled time, and it is therefore considered to be optional. The operational state is enabled or disabled.
64 DEGRADED
The service available from the resource is degraded in some respect, such as in speed or operating capacity. However, the res ource remains available for service, either
because some services are satisfactory or because degraded service is preferable to no service at all. The operational state is enabled.
128 NOT_INSTALLED
The resource represented by the managed object is not present, or is incomplete. For example, a plug-in unit is missing, a cable is disconnected, or a software module is
not loaded. The operational state is disabled.
256 LOG_FULL
This indicates a log full condition. Currently not used.
544 DEPENDENCY_LOCKED
The administrative state of a resource that this resource depends on is locked or the availability status of the other resour ce is dependency locked. The operational state is
disabled.
1056 DEPENDENCY_FAILED
The availability status of a resource that this resource depends on is failed or dependency failed. The operational state is disabled.
2080 DEPENDENCY_SHUTTINGDOWN
The administrative state of a resource that this resource depends on is shutting down or the availability status of the other resource is dependency shutting down. The
operational state is disabled.

ENB02> get . ntp
=============================================================================================
MO Attribute Value
=============================================================================================
ManagedElementData=1 ntpBurstFlagPrimary true
ManagedElementData=1 ntpBurstFlagSecondary false
ManagedElementData=1 ntpBurstFlagThird false
ManagedElementData=1 ntpMaxPollPrimary 1024
ManagedElementData=1 ntpMaxPollSecondary 1024
ManagedElementData=1 ntpMaxPollThird 1024
ManagedElementData=1 ntpMinPollPrimary 16
ManagedElementData=1 ntpMinPollSecondary 64
ManagedElementData=1 ntpMinPollThird 64
ManagedElementData=1 ntpServerAddressPrimary 10.0.0.19
ManagedElementData=1 ntpServerAddressSecondary 0.0.0.0
ManagedElementData=1 ntpServerAddressThird 0.0.0.0
ManagedElementData=1 ntpServiceActivePrimary true
ManagedElementData=1 ntpServiceActiveSecondary false
ManagedElementData=1 ntpServiceActiveThird false
IpAccessHostEt=1 ntpDscp 46
IpAccessHostEt=1 ntpServerMode 0 (DISABLED)
IpAccessHostEt=1,IpSyncRef=1 ntpServerIpAddress 172.30.108.217
EUtranCellFDD=21,UeMeasControl=1 measurementPriority 0 (ANR_PRIO)
EUtranCellFDD=21,UeMeasControl=1,ReportConfigEUtraIntraFreqPm=1 reportAmountPm 0
EUtranCellFDD=22,UeMeasControl=1 measurementPriority 0 (ANR_PRIO)
EUtranCellFDD=23,UeMeasControl=1 measurementPriority 1 (PM_PRIO)
EUtranCellFDD=23,UeMeasControl=1,ReportConfigEUtraIntraFreqPm=1 reportAmountPm 0
==============================================================================================
Total: 8 MOs
Check NTP (Synchronization Server)
Have StatisticsData
based on the server
Sync clock based on
the server

ENB04> get 1
============================================================================
1 ManagedElementData=1
============================================================================
ManagedElementDataId 1
autoConfigurationAllowed true
autoConfigurationStatus 0 (IDLE)
daylightSavingTime false
docLibSystemDefined
docLibUserDefined
documentServerAddress
hdVolumeCFreespace 658620416
hdVolumeCSize 1203199488
logonServerAddress
minimumHdVolumeCFreespace 200
nodeLocalTimeZone GMT
nodeUTCTime 1300866547000
nodeUniqueID
ntpBurstFlagPrimary true
ntpBurstFlagSecondary false
ntpBurstFlagThird false
ntpMaxPollPrimary 1024
ntpMaxPollSecondary 1024
ntpMaxPollThird 1024
ntpMinPollPrimary 16
ntpMinPollSecondary 64
ntpMinPollThird 64
ntpServerAddressPrimary 10.0.0.19
ntpServerAddressSecondary 0.0.0.0
ntpServerAddressThird 0.0.0.0
ntpServiceActivePrimary true
ntpServiceActiveSecondary false
ntpServiceActiveThird false
piuGroupEscalationType 4 (WARM_AT_PIU_RESTART)
swServerUrlList
===========================================================================
Total: 1 MOs
ENB04> readclock
$ readclock
Date: 2011-03-23 UTC Time: 07:49:12. Wednesday
Check time
Laptop time (2011.03.22 16:49:25)
Check time Data
eNB time (2011.03.23 07:49:12)
JST, KST Standard
time
ENB02> ntpconfig info
$ ntpconfig info
Primary server: 10.0.0.19
No secondary server found
No tertiary server found
NTP synchronized 2011-03-23 08:48:59
NTP changed server 2011-03-23 08:32:11 10.0.0.19
NTP clock stepped 2011-03-23 08:31:51 2011-03-23 08:31:51.127->2011-03-23 08:31:51.129 (src 10.0.0.19
$

ENB02> ue print -admitted
$ ue print -admitted
CellId #UE:s #Bearers
31 2 2
32 2 2
33 1 1
Check how many calls were made
By default, when there is a call in UE 1,
Bearers display 1 as well.
Command to check how many calls are in
operation
ENB03> ue print -ue -allcell
$ ue print -ue -allcell
CellId RacUeRef BbUeRef {traceRef,interfaces,traceDepth,ipAddress} TypeOfActiveTrace SetByColi CTSess
31 20 520100256 X CRUT false 43711
31 23 520100416 X CRUT false 43714
32 17 536877568 X CRUT false 21863
32 19 536877728 X CRUT false 21865
33 169 553654880 X CRUT false 170
$ /home/Administrator/moshell/commonjars/connect: connection timed out
$

ENB02> appsh oper
$ appsh oper
egr_sid: ipIf | host | ipDA | dstPort | status
None found
0 UDP sessions in operational
egr_sid: laid | ipDA | teid | status
18 : 0 | 4.3.0.148 | 2487747802 | ok
21 : 0 | 4.2.0.150 | 3235900547 | ok
22 : 0 | 4.2.0.150 | 3620931837 | ok
23 : 0 | 4.2.0.150 | 988112966 | ok
24 : 0 | 4.2.0.150 | 2032833662 | ok
5 GTP sessions in operational
$
ENB02> appsh data 6
110318-20:05:42 10.0.0.163 8.0s ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/5752
$ appsh data 6
appsh data <{udp|gtp}> <sid>
ENB02> appsh data gtp 21
$ appsh data gtp 4
ipInterfaceIndex = 0
hostIndex = 1
ipInterfaceIndex_old = 7
hostIndex_old = 31
remoteIpAddress = 4.2.0.150
receiveTEID = 1671200888
dscp = 20
clientInternalSwitchAddress = 02:00:01:03:00:03
serverInternalSwitchAddress = 02:00:01:02:00:03
internalVLANID = 10
sessionId = 4
ENB02> appsh data gtp 22
$ appsh data gtp 5
ipInterfaceIndex = 0
hostIndex = 1
ipInterfaceIndex_old = 7
hostIndex_old = 31
remoteIpAddress = 4.2.0.150
receiveTEID = 615576315
dscp = 46
clientInternalSwitchAddress = 02:00:01:03:00:03
serverInternalSwitchAddress = 02:00:01:02:00:03
internalVLANID = 10
sessionId = 5
How to check bearer information
Check TEID in S1 side to distinguish default /
dedicated bearer

ENB02> get . term
=================================================================================================================
MO Attribute Value
=================================================================================================================
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1 ExchangeTerminalIpId 1
TermPointToMme=LGERMME02 TermPointToMmeId LGERMME02
EUtraNetwork=1,ExternalENodeBFunction=4506-3,TermPointToENB=4506-3 TermPointToENBId 4506-3
EUtraNetwork=1,ExternalENodeBFunction=4506-4,TermPointToENB=4506-4 TermPointToENBId 4506-4
TermPointToMme=Samsung2 TermPointToMmeId Samsung2
TermPointToMme=LGERMME01 TermPointToMmeId LGERMME01
TermPointToMme=Samsung1 TermPointToMmeId Samsung1
=================================================================================================================
Total: 7 MOs
ENB02> get . relation
=================================================================================================================
MO Attribute Value
=================================================================================================================
EUtranCellFDD=22,EUtranFreqRelation=3 EUtranFreqRelationId 3
=================================================================================================================
Total: 1 Mos
ENB02> get . external
=================================================================================================================
MO Attribute Value
=================================================================================================================
HwUnit=SCU,AlarmPort=14 activeExternalAlarm false
EUtraNetwork=1,ExternalENodeBFunction=4506-3 ExternalENodeBFunctionId 4506-3
EUtraNetwork=1,ExternalENodeBFunction=4506-3,ExternalEUtranCellFDD=4506-3-31 ExternalEUtranCellFDDId 4506-3-31
EUtraNetwork=1,ExternalENodeBFunction=4506-4 ExternalENodeBFunctionId 4506-4
=================================================================================================================
Total: 24 MOs
Handover
Inter eNB connection information for X2
Handover
Inter cell information for X2 Handover
eNB information for Handover

ENB02> get . ipaddress
==========================================================================================
MO Attribute Value
==========================================================================================
Security=1 aAServerIPAddressList s[0] =
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 ownIpAddressActive 0.0.0.0
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 ownIpAddressPassive 0.0.0.0
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=2 ownIpAddressActive 10.0.0.163
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=2 ownIpAddressPassive 0.0.0.0
UpgradePackage=R20HN ftpServerIpAddress 192.168.10.10
UpgradePackage=InitialUP ftpServerIpAddress FTP_ServerIP_Address
UpgradePackage=CXP102051/10_R9BE/2 ftpServerIpAddress 10.0.0.36
UpgradePackage=R9AS ftpServerIpAddress 169.254.1.11
UpgradePackage=R7AK ftpServerIpAddress 169.254.1.11
Ip=1 nodeIpAddress 10.0.0.163
Ip=1,EthernetLink=1 ipAddress 169.254.1.10
Ip=1,IpHostLink=1 ipAddress 10.0.0.163
IpAccessHostEt=1 ipAddress 4.2.0.18
IpAccessHostEt=1,IpSyncRef=1 cachedIpAddress
EUtraNetwork=1,ExternalENodeBFunction=4506-3,TermPointToENB=4506-3 ipAddress 4.2.0.34
EUtraNetwork=1,ExternalENodeBFunction=4506-3,TermPointToENB=4506-3 usedIpAddress 0.0.0.0
EUtraNetwork=1,ExternalENodeBFunction=4506-4,TermPointToENB=4506-4 ipAddress 4.2.0.50
EUtraNetwork=1,ExternalENodeBFunction=4506-4,TermPointToENB=4506-4 usedIpAddress 0.0.0.0
TermPointToMme=Samsung2 ipAddress1 4.3.0.140
TermPointToMme=Samsung2 usedIpAddress 0.0.0.0
TermPointToMme=Samsung1 usedIpAddress 4.3.0.132
===========================================================================================
Total: 19 Mos
10.0.0.164> get . vid
===========================================================================================
MO Attribute Value
===========================================================================================
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 vid 900
===========================================================================================
Total: 1 MOs
Check IP Address, v-LAN id
Check station IP address
Check MME IP address
Check O&M IP address

Checklist in case of failure
ENB03> cabr
====================================================================================================
Pos Date and Time Domain OS Process Errorcode Cause (PMD ID)
====================================================================================================
0001 00-00-00 00:00:00 Processor BASIC 0x00000003 Error log was cleared at last restart. Power on restart
0001 11-03-28 01:26:04 Processor BASIC Cs_boardManager_proc 0xB0AD0002 Board manager restart. Restart ordered by system manager
0001 11-03-28 01:26:12 Processor BASIC bmLoaderClientHelper 0xB0AD0001 Board manager restart. Mismatch of files in flash, goto backup
0001 11-03-28 01:26:48 Processor BACKUP bmLoaderClientHelper 0xB0AD0001 Board manager restart. Reset after backupmode
0001 11-03-28 01:27:40 Processor BASIC Cs_boardManager_proc 0xB0AD0006 Board manager restart. Restart ordered by system manager
---------------------------------------------------------------------------------------------------------------
ENB02> caba
=====================================================================================================
Pos Date and Time Domain OS Process Errorcode Cause (PMD ID)
=====================================================================================================
0001 00-00-00 00:00:00 Processor BASIC 0x00000003 Error log was cleared at last restart. Power on restart
---------------------------------------------------------------------------------------------------------------
$

Check VSWR
ENB01> cabx
============================================================================================================
====================
SMN APN PORT BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR
============================================================================================================
====================
0 1 BXP_0_1 RUS01B5 steady 16hz off KRC11864/2 R1C 20100923 C823763459
--------------------------------------------------------------------------------------------------------------------------------
ENB01> lhsh BXP_4_1 fui get vswr
110110-18:33:56 10.0.0.162 8.0n ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/5096
$ lhsh BXP_3_1 fui get vswr
vswr: 28.5[dB]
ENB01> cabx
===============================================================================================
===============================================================================================
--------------------------------------------------------------------------------------------------------------------------------
ENB01> lhsh BXP_3_1 fui get vswr
$ lhsh BXP_3_1 fui get vswr
vswr: 28.5[dB]
ntpServerIpAddress 172.30.108.217
Check O&M IP address

Check current output
ENB02> cabx
==============================================================================================
=============================================================================================
0 1 BXP_2_1 RUS01B5 steady off off KRC11864/2 R1C 20101103 C823863785
0 1 BXP_5_1 RUS01B5 steady off off KRC11864/2 R1C 20100913 C823738900
--------------------------------------------------------------------------------------------------------------------------------
ENB02> lhsh BXP_2_1 warpA read DL_PM_PA0_C0
$ lhsh BXP_2_1 warpA read DL_PM_PA0_C0
Value 0x002DE4FF (3007743) read from address 0x00000B8F.
$
Value 0x003BB172 (3912050) read from address 0x00000B90.
$
Value 0x003888B1 (3705009) read from address 0x00000B91.
$
Value 0x002E0F80 (3018624) read from address 0x00000B92.
If there is a value here, you
can see there is TX output.
Provide accurate output value
a. p_c0 = p_reg_c0*(2^14)/(15*81920) = p_reg_c0 * 16384 / 1228800
b. p_c1 = p_reg_c1*(2^14)/(15*81920) = p_reg_c1 * 16384 / 1228800
c. p_c2 = p_reg_c2*(2^14)/(15*81920) = p_reg_c2 * 16384 / 1228800
d. p_c3 = p_reg_c3*(2^14)/(15*81920) = p_reg_c3 * 16384 / 1228800
Total = p_c0 + p_c1 + p_c2 + p_c3
(Total / 2914^2) * 60 W

Check output target
How to change station output
ENB03> get . power
ENB03> set EUtranCellFDD=43 partOfRadioPower 20 ( Command that modify from 60% of 43.7dBm to 20%.
ENB03> st cell
ENB03> bl cell
ENB03> deb cell
ENB04> get . power
============================================================================================
MO Attribute Value
============================================================================================
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt CapacityOutputPowerId 60Watt
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt capacityUnitOutputPower Number of 60 Watt Licenses
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt keyIdOutputPower CXC4010626
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt licenseCapacityOutputPower 6
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt licenseStateOutputPower 1 (ENABLED)
HwUnit=SAU powerDistrFaultIndicator 1 (NOT_AVAILABLE)
Subrack=1 maxPowerDissipation -1
Subrack=1 powerMeasurements Struct{5}
>>> 1.currentLeft = -1
>>> 2.currentRight = -1
>>> 3.distributedPower = 0
>>> 4.voltageLeft = -1
>>> 5.voltageRight = -1
HwUnit=PDU-1 powerDistrFaultIndicator 1 (NOT_AVAILABLE)
HwUnit=SCU powerDistrFaultIndicator 1 (NOT_AVAILABLE)
SubrackProdType=ROJ999999_* maxPowerDissipation 0
HwUnit=PDU-2 powerDistrFaultIndicator 1 (NOT_AVAILABLE)
EUtranCellFDD=43 maximumTransmissionPower 437
EUtranCellFDD=43 partOfRadioPower 60
EUtranCellFDD=43 partOfSectorPower 60
SectorEquipmentFunction=S2 confOutputPower 40
SectorEquipmentFunction=S2 sectorPower 0
PowerSupply=1 PowerSupplyId 1
PowerDistribution=1 PowerDistributionId 1
=============================================================================================
Total: 16 MOs
Use when you check
output value

ENB04> pr security
===================================================================================
Proxy MO
===================================================================================
57 SystemFunctions=1,Security=1
962 ENodeBFunction=1,SecurityHandling=1
===================================================================================
Total: 2 MOs
ENB04> get 962
============================================================================================
962 ENodeBFunction=1,SecurityHandling=1
===========================================================================================
SecurityHandlingId 1
cipheringAlgorithms 14 (EEA0)
countWrapSupervisionActive true
integrityProtectionAlgorithms 8 (EIA2)
rbIdSupervisionActive false
============================================================================================
Total: 1 MOs
ENB04>
Check Security
Check whether Security should be used during handset
connection to RRC.
Enter get 962 (value confirmed in the above) to check detailed
information.
True: Use Security during RRC connection.
False: Do not use security during RRC connection.

ENB04> parsemom moshell/jarxml/
ERBS_NODE_MODEL_A_9_2.xml.cache.gz* ERBS_NODE_MODEL_B_1_30_COMPLETE.xml.gz* jacoms.jar*
ERBS_NODE_MODEL_A_9_2.xml.gz* ERBS_NODE_MODEL_B_1_40.xml.cache.gz jacorb.jar*
ERBS_NODE_MODEL_A_9_53.xml.cache.gz* ERBS_NODE_MODEL_B_1_40.xml.gz lmids.txt
ERBS_NODE_MODEL_A_9_53.xml.gz* ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz* lmids.txt.old2.gz*
ERBS_NODE_MODEL_A_9_53_COMPLETE.xml.cache.gz ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.gz* moshellrc*
ERBS_NODE_MODEL_A_9_53_COMPLETE.xml.gz* MGW_R2.xml.cache.gz moshellrc.bak*
ERBS_NODE_MODEL_B_1_30.xml.cache.gz MGW_R2.xml.gz* updata.txt*
ERBS_NODE_MODEL_B_1_30.xml.gz cppdata.txt uptomom.txt
ERBS_NODE_MODEL_B_1_30_COMPLETE.xml.cache.gz* event/
ENB04> parsemom moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.gz
Parsing MOM: moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.gz .................................Done.
Caching MOM to: moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache .....Done.
Compressing to: moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz ...Done.
Parsing file /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt ............................................................................Done.
ENB04> get systemc
=================================================================================================
964 ENodeBFunction=1,SystemConstants=1
=================================================================================================
SystemConstantsId 1
systConstants 38:0,125:3,204:100,213:200,242:1,70:90,73:86,195:10,27:-20,256:0,258:0,229:19600
=================================================================================================
1036 SupportSystemConfiguration=1
==================================================================================================
SupportSystemConfigurationId 1
==================================================================================================
Total: 2 MOs
ENB04>
Check System constant ※ don’t open to customer
1. Put Complete mom file in C:cygwinhomeAdministratormoshelljarxml.
2. Enter command ( parsemom moshell/jarxml/ ) and select tab key to display Complete mom in the folder.
3. Drag and paste, then select Enter.
4. Able to check system constant status at the time of entering get systemc.
Complete mom is changed at the time of version upgrade,
and it needs constant upgrade.

SISO/SIMO:
Set system constant value as 125:1
Set Tx Ant number as 1
EUtranCellFDD=21 noOfTxAntennas 1
EUtranCellFDD=21 noOfRxAntennas 1
Transmit Diversity
Set system constant value as 125:2
Configure Licensing=1,OptionalFeatures=1,DualAntDlPerfPkg=1 featureStateDualAntDlPerfPkg 1 (ACTIVATED) //DualAntDlPerfPkg License Enable
SM
Set system constant value as 125:3 // Operate as Transmit Diversity or SM(Large CDD), according to channel environment
Configure Licensing=1,OptionalFeatures=1,DualAntDlPerfPkg=1 featureStateDualAntDlPerfPkg 1 (ACTIVATED) //DualAntDlPerfPkg License Enable
TM(Transmission mode) check and set ANT
number ENB02> get systemc
============================================================================
============================================================================
SystemConstantsId 1
systConstants 38:0,125:3,204:100,213:200,242:1,70:90,73:86,195:10,27:-20,256:0,258:0,229:19600
============================================================================
============================================================================
============================================================================
Total: 2 Mos
eNB3> get . antenna
==============================================================================
MO Attribute Value
==============================================================================
AntennaUnitGroup=1 AntennaUnitGroupId 1
AntennaUnitGroup=1,AntennaUnit=1 AntennaUnitId 1
AntennaUnitGroup=1,AntennaUnit=1 mechanicalAntennaTilt 0
EUtranCellFDD=31 noOfUsedTxAntennas 2
=============================================================================
Total: 3 MOs
ENB02> get . nooftx
=============================================================================
MO Attribute Value
=============================================================================
=============================================================================
Total: 3 MOs
TM (Transmission Mode) : Set transmission
mode.
3: MIMO
2: SIMO
1: SISO
Numbur of TX ANT is currently 1
To check RX ANT number: get . noofrx

ENB04> get systemc
======================================================================================================
======================================================================================================
SystemConstantsId 1
systConstants
======================================================================================================
======================================================================================================
======================================================================================================
Total: 2 MOs
ENB04> acl systemc
======================================================================================================
======================================================================================================
746 SystemConstants=1 resetSystConst 1
746 SystemConstants=1 writeSystConst 2
776 SupportSystemConfiguration=1 configureSupportSystem 1
======================================================================================================
ENB04> acc 746 writeSystConst
Call Action writesystconst on following 1 MOs ?
===================================================================================
===================================================================================
Call action writesystconst on 1 MOs. Are you Sure [y/n] ? y
======================================================================================================
======================================================================================================
746 SystemConstants=1 writeSystConst 2
Parameter 1 of 2, name (string): 125
Parameter 2 of 2, value (string): 3
======================================================================================================
TM(Transmission mode)
Check and set ANT
number

ENB04> pr anr
===================================================================================
Proxy MO
===================================================================================
29 SystemFunctions=1,Licensing=1,OptionalFeatures=1,Anr=1
973 ENodeBFunction=1,EUtranCellFDD=41,UeMeasControl=1,ReportConfigEUtraBestCell=1,ReportConfigEUtraBestCellAnr=1
978 ENodeBFunction=1,EUtranCellFDD=41,UeMeasControl=1,ReportConfigA5=1,ReportConfigA5Anr=1
1006 ENodeBFunction=1,AnrFunction=1
1007 ENodeBFunction=1,AnrFunction=1,AnrFunctionGeran=1
1008 ENodeBFunction=1,AnrFunction=1,AnrFunctionUtran=1
1009 ENodeBFunction=1,AnrFunction=1,AnrFunctionEUtran=1
===================================================================================
Total: 11 MOs
ENB04> get ENodeBFunction=1,AnrFunction=1,AnrFunctionEUtran=1
=================================================================================================================
1009 ENodeBFunction=1,AnrFunction=1,AnrFunctionEUtran=1
=================================================================================================================
AnrFunctionEUtranId 1
anrInterFreqState 0 (DEACTIVATED)
anrIntraFreqState 1 (ACTIVATED)
anrUesEUtraIntraFDecr 10
anrUesEUtraIntraFIncrAnr 20
anrUesEUtraIntraFIncrHo 100
anrUesEUtraIntraFMax 20
anrUesEUtraIntraFMin 1
anrUesThreshInterFDecr 10
anrUesThreshInterFIncrAnr 20
anrUesThreshInterFIncrHo 100
anrUesThreshInterFMax 20
anrUesThreshInterFMin 1
cellAddRsrpThresholdEutran -1440
cellAddRsrqThresholdEutran -1920
hoAllowedEutranPolicy true
x2SetupPolicy true
=================================================================================================================
Total: 1 MOs
ENB04> mom . cellAddRsrpThresholdEutran
####################################################################################################################################
MO Class Attribute Type Flags
####################################################################################################################################
AnrFunction cellAddRsrpThresholdEutran long deprecated
------------------------------------------------------------------------------------------------------------------------------------
Deprecated: Since L11B. Replaced by AnrFunctionEUtran::cellAddRsrpThresholdEutran.
Threshold value for reported power for a cell to be automatically added as neighbor.
Takes effects: Immediately.
Unit: 0.1 dBm
Resolution: -
Range: -1440 to 0, Default=-1440
************************************************************************************************************************************
AnrFunctionEUtran cellAddRsrpThresholdEutran long
------------------------------------------------------------------------------------------------------------------------------------
Threshold value for reported power for a cell to be automatically added as neighbor.
Takes effects: Immediately.
Unit: 0.1 dBm
Resolution: -
Range: -1440 to 0, Default=-1440
************************************************************************************************************************************
Configure
ANR

Manage and apply License
ENB03> license server
$ license server
License Server : 000101d4
Latest PV : 3
License Key File : Installed, Mon Mar 14 14:19:58 2011
Sequence Number : 1008
Node Identity State : 1
Unique Logical Name : eNB3
Validation Start : Sat Mar 26 13:17:56 2011
Validation Interval : 1 Day
Emergency Status : Deactivated
Emergency State : 2
Emergency Counter : 1
Emergency State Time : Tue Mar 8 09:56:59 2011
Emergency Time Limit : 7 Days
$ /home/Administrator/moshell/commonjars/connect: connection timed out
$
ENB03> get . fingerprint
=========================================================================
MO Attribute Value
=========================================================================
Licensing=1 fingerprint eNB3
=========================================================================
Total: 1 MOs
4.7.1 Problem Description
License keys are required in combination with any given enabled feature in order to allow full access to a feature.
The following Command Line Interface (COLI) command printouts must be taken from DUL if they are not already collected:
- license server (License Server details)
- license client (License Client details)
- License sub –a (Feature status information)
- license lkf (Status of license key file)
- license key (License key information)
All files in the /c/license/ directory must be transferred by FTP, binary mode, from the node.
Save the output in an attachment called “license_files.zip”
169.254.1.10> acc RbsConfiguration=1 setUniqueLogicalName
stopfile=/tmp/2748
Call Action setuniquelogicalname on following 1 MOs ?
================================================
776 ENodeBFunction=1,RbsConfiguration=1
================================================
Call action setuniquelogicalname on 1 MOs. Are you Sure [y/n] ? y
================================================
Proxy MO Action
Nr of Params
================================================
776 RbsConfiguration=1
setUniqueLogicalName 1
Parameter 1 of 1, uniqueLogicalName (string): eNB1
!!! Exception failure: org.omg.CORBA.COMM_FAILURE: vmcid: 0x0 minor
code: 0 completed: Maybe
================================================
How to enter Fingerprint
 New Sequence Number
must be bigger than
existing value.

ENB03> acl 6
==========================================================================
==========================================================================
6 Licensing=1 setEmergencyState 0
6 Licensing=1 updateLicenseKeyFile 4
==========================================================================
ENB04> acc 6 updateLicenseKeyFile
Call Action updatelicensekeyfile on following 1 MOs ?
==========================================================================
6 SystemFunctions=1,Licensing=1
==========================================================================
Call action updatelicensekeyfile on 1 MOs. Are you Sure [y/n] ? y
==========================================================================
==========================================================================
6 Licensing=1 updateLicenseKeyFile 4
Parameter 1 of 4, userId (string): lte
Parameter 2 of 4, password (string): lte
Parameter 3 of 4, ipAddress (string): 169.254.1.12
Parameter 4 of 4, sFile (string): eNB4_101224_004441.xml
==========================================================================
ENB02> inv
==========================================================================
Feature keyId licenseState featureState serviceState
description
==========================================================================
AgpsSupl=1 CXC4010963 1 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
AirIfLoadGenerator=1 CXC4010955 1 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
169.254.1.10> license lkf
$ license lkf
License Key File Status : 2 (LKF_ERROR)
Additional Info : Faulty fingerprint in the license key file.
$
1. Upload license file(.xml) to FTP
2. Enter nmsadm if file to OSS-RC’s UAS(10.0.0.19) (Use FTP,
ID ; nmsadm, PW: nms275)
2. Put the file into My Computer (169.254.1.12) (Use FTP, ID:
lte, pw: lte
3. Follow MOshell command procedure.
Manage and apply License
Check with these commands if there is
any error after applying License.

Check ping
ENB03> get . ipadd
=====================================================================
MO Attribute Value
=====================================================================
UpgradePackage=R9AS ftpServerIpAddress 169.254.1.11
UpgradePackage=R9BE%2 ftpServerIpAddress 192.168.10.10
Ip=1 nodeIpAddress 10.0.0.164
Ip=1,EthernetLink=1 ipAddress 169.254.1.10
Ip=1,IpHostLink=1 ipAddress 10.0.0.164
IpAccessHostEt=1 ipAddress 4.2.0.34
IpAccessHostEt=1,IpSyncRef=1 cachedIpAddress
ENodeBFunction=1 ipAddress 4.2.0.34
ENodeBFunction=1 x2IpAddrViaS1Active true
EUtraNetwork=1,ExternalENodeBFunction=ENB02,TermPointToENB=ENB02 ipAddress 4.2.0.18
EUtraNetwork=1,ExternalENodeBFunction=ENB02,TermPointToENB=ENB02 usedIpAddress
=====================================================================
Total: 20 MOs
ENB03> acc IpAccessHostEt ping
Call Action ping on following 1 MOs ?
=====================================================================
721 IpSystem=1,IpAccessHostEt=1
=====================================================================
Call action ping on 1 MOs. Are you Sure [y/n] ? y
=====================================================================
=====================================================================
721 IpAccessHostEt=1 ping 1
Parameter 1 of 1, host (string): 4.2.0.35
>>> Return value = 4.2.0.35 no answer
======================================================================
When ping comes back normally:
>>> Return value = 4.3.0.18 is alive
ENB03> acc ipoam ping
Call Action ping on following 1 MOs ?
================================================================
662 IpOam=1
================================================================
Call action ping on 1 MOs. Are you Sure [y/n] ? y
=================================================================
===================================================================
662 IpOam=1 ping 1
>>> Return value = no answer from * / 10.0.0.19
===================================================================

Statistics DATA
pm_data에 Statisticsdata is
accumulated in pm_date of station,
O&M Server calls every 15 minutes.

370410176 moshell-commands

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Was ist angesagt?

Was ist angesagt? (20)

Ähnlich wie 370410176 moshell-commands

Ähnlich wie 370410176 moshell-commands (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

370410176 moshell-commands