Weitere ähnliche Inhalte
Ähnlich wie Technology Insight Report Coronary Stents
Ähnlich wie Technology Insight Report Coronary Stents (20)
Mehr von Prashant Nair (20)
Kürzlich hochgeladen (20)
Technology Insight Report Coronary Stents
- 1. Technology Insight Report
Coronary Stents
Cardiology has come a long way over the decades with huge
advances having been made in areas such as invasive surgery and
interventional cardiology. As a result cardiac patients have had the
option of undergoing preventive measures against what could
otherwise result in serious complications with angioplasty. In this
sphere of invasive surgery, the “Coronary Stent” has been one of
the most significant innovations. Little over 20 years on and
advances in the coronary stent in terms of material research and
coatings still continues. The patent filings related to innovations
around the coronary stent can reveal some great insights into this
breakthrough in medicine.
Disclaimer: This report should not be construed as business advice and the insights are not to be used as basis for investment or
business decision of any kind without your own research and validation. Gridlogics Technologies Pvt. Ltd. disclaims all warranties,
whether express, implied or statutory, of reliability, accuracy or completeness of results, with regards to the information contained
in this report.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 2.
Overview
Introduction to the Coronary Stent Angioplasty Procedure
A stent is a wire metal mesh tube used to prop open an artery during Percutaneous transluminal coronary
angioplasty. The stent is collapsed to a small diameter and put over a angioplasty (PTCA), usually simply
balloon catheter. It's then moved into the area of the blockage. When the called angioplasty, involves opening
balloon is inflated, the stent expands, locks in place and forms a scaffold. the blocked artery.
This holds the artery open. The stent stays in the artery permanently,
holds it open, improves blood flow to the heart muscle and relieves A typical angioplasty procedure
symptoms (usually chest pain). Within a few weeks of the time the stent follows the following steps:
was placed, the inside lining of the artery (the endothelium) grows over
the metal surface of the stent. • The surgeon threads a
narrow catheter (a tube)
Stents are used depending on certain features of the artery blockage. This containing a fiber optic
camera directly to the
includes the size of the artery and where the blockage is. Stenting is a
blocked vessel.
fairly common procedure; in fact, over 70 percent of coronary angioplasty
• The physician opens the
procedures also include stenting. blocked vessel using balloon
angioplasty, in which the
Source: http://www.americanheart.org/presenter.jhtml?identifier=4721 surgeon passes a tiny
deflated balloon through
A Brief History the catheter to the vessel.
From the time of the initial percutaneous balloon angioplasty, it was • The balloon is inflated to
theorized that devices could be placed inside the arteries as scaffolds to compress the plaque against
keep them open after a successful balloon angioplasty. This did not the walls of the artery,
flattening it out so that
become a reality in the cardiac realm until the first intracoronary stents
blood can once again flow
were successfully deployed in coronary arteries in 1986. The first stents through the blood vessel
used were self‐expanding Wallstents. The use of intracoronary stents was freely.
quickly identified as a method to treat some complications due to PTCA, • In order to keep the artery
and their use can decrease the incidence of emergency bypass surgery for open afterwards, surgeons
acute complications post balloon angioplasty. now most often employ a
device called a coronary
It was quickly realized that restenosis rates were significantly lower in stent, which is an
individuals who received an intracoronary stent when compared to those expandable metal mesh
who underwent just balloon angioplasty. A damper on the immediate use tube that is implanted
during angioplasty at the
of intracoronary stents was subacute thrombosis. Subacute thrombosis
site of the blockage. (A stent
rates with intracoronary stents proved to be about 3.7 percent, higher may be used as the initial
than the rates seen after balloon angioplasty. Post‐procedure bleeding opening device, in some
was also an issue, due to the intense combination of anticoagulation and cases, instead of balloon
anti‐platelet agents used to prevent stent thrombosis. angioplasty. It is not yet
clear if this approach is
Stent technology improved rapidly, and in 1989 the Palmaz‐Schatz significantly more beneficial
balloon‐expandable intracoronary stent was developed. Initial results with than PTCA plus optional
the Palmaz‐Schatz stents were excellent when compared to balloon stenting.)
angioplasty, with a significantly lower incidence of abrupt closure and
peri‐procedure heart attack. Late restenosis rates with
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 3.
Palmaz‐Schatz stents were also significantly improved when compared
with balloon angioplasty. However, mortality rates were unchanged
compared to balloon angioplasty. While the rates of subacute thrombosis
and bleeding complications associated with stent placement were high, by
1999 nearly 85% of all PCI procedures included intracoronary stenting.
In recognition of the focused training required by cardiologists to perform
percutaneous coronary interventions and the rapid progression in the
field of percutaneous coronary interventions, specialized fellowship
training in the field of Interventional Cardiology was instituted in 1999.
• Once in place, the stent
Source: pushes against the wall of
http://en.wikipedia.org/wiki/History_of_invasive_and_interventional_cardiology the artery to keep it open.
Complications occur in about 10% of
patients (about 80% within the first
day). In one report of 53 European
and Canadian medical centers, the
mortality rate from all causes four
years after PTCA was 4.1% Outcomes
are better in hospital settings with
experienced teams and backup.
Source:
http://adam.about.com/reports/000
003_9.htm
Ima
ge Source: http://www.medicinenet.com/coronary_angioplasty/article.htm
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 4.
Coronary Stents – Patent Landscape
Overview
Patent filings around the coronary stent hold great insights into
the innovation, research and development within the space. With
the help of Patent iNSIGHT Pro, we will analyze the full coronary
stent patent data to find answers to the following:
• What has been the IP publication trend for Coronary
Stents development in general?
• Who are the top assignees or key players in coronary
stent research and development?
• Which assignees hold the maximum inventions across
different application areas of coronary stents?
• How is the Assignee portfolio spread across different
material types?
• How is the innovation frequency across different stent
materials?
• What materials are being used for stents and how do
they compare across key application areas in the body?
• Which assignees hold the strongest patent portfolios for
coatings for stents?
• Who are the prolific innovators in stent technology and
how do their focus areas compare with each other?
• How are the records of top 5 assignees related based on
their cross‐citation relationships?
In order to analyze the stent records more effectively we
classified all the records along three lines:
• Innovations on Application Areas of the stent in human
body,
• Innovations on Materials used, and
• Innovations on Coatings used for stents.
To get a more accurate and all round perspective on these the
patent sets have been classified into these three categories.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 5.
Classifications by Application Areas
Arterial re‐stenosis or re‐thrombosis
Arteries in Abdomen
Arteries in Chest
Arteries in Kidney
Arteries in Thigh
Carotid Artery Stents
Treatment of Atherosclerosis
Treatment of Cancer
Classifications by Material Type
A. Metal Stents
Bare Metal‐ Stainless Steel
Bare Metal‐ Cobalt Chromium Alloy
Bare Metal‐ Magnesium Alloys
Bare Metal‐ Pure Iron
Bare Metal‐ Nickel‐Titanium Alloys
Bare Metal‐ Platinum Iridium
Bare Metal‐ Tantalum
Bare Metal‐ Titanium
Bio Degradable Metal Stents
Drug Coated/Eluting Stent‐ Current drug‐eluting
stents have three components:
i) The bare metal backbone, which serves as the
mechanical scaffold – this element affects
deliverability, access to side branch and surface area
over which the drug is delivered.
ii) A polymer or combination of polymers – this is a
critical component. It varies from manufacturer to
manufacturer. Concerns have been expressed over
the eventual degradation of the polymer and
whether that will lead to inflammation. The specific
polymer affects distribution kinetics of drug delivery.
iii) The specific drug – at the present time, there are
two approved drugs – Sirolimus and paclitaxel. The
release kinetics depends upon the specific drug
chosen and the polymer. Both fast‐ and slow‐release
formulations have been tested. Multiple other drugs
and drugs classes are being tested.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 6.
B. Non Metal Stents
Bio‐absorbable Non Polymer Stents
Bio‐absorbable Polymer Stents
Bio‐degradable Non Polymer Stents
Bio‐degradable Polymer Stents
Fabric or stent grafts.
C. Others
Co‐polymers
Silicone
D. Hybrid (metal & non‐metal)
Biocompatible materials may be configured into any number of
implantable medical devices including intraluminal stents.
• Biocompatible material may comprise metallic and non‐
metallic materials in hybrid structures. In one such structure,
a device may be fabricated with one or more elements
having an inner metallic core that is not degradable with an
outer shell formed from a polymeric material that is
biodegradable. Additionally, therapeutic agents may be
incorporated into the microstructure or the bulk material.
• Composite material stent comprising a metallic wire and a
biodegradable fiber (hybrid stent)
Source:
http://www.informaworld.com/smpp/content~content=a90972962
3&db=all
Classifications by Coatings
Endothelial Cells
The endothelium is the thin layer of cells that line the
interior surface of blood vessels, forming an interface
between circulating blood in the lumen and the rest
of the vessel wall.
Inorganic Carbon
Inorganic Gold
Inorganic Iridium Oxide
Inorganic Silicon Carbide
Porous Material
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 7. The Search Strategy
The first step is to create and define a patent set that will serve
as the basis of our analysis.
Class Description:
Using the commercial patent database, PatBase as our data
source, we used the following search query to create our A61f2/82: Devices providing
patent set: patency to, or preventing
collapsing of, tubular structures
of the body
((coronary or (drug w/2 eluting~) or artery))
AND
A61F2/84: Instruments
TAC=stent* specially adapted for their
AND placement or removal.
(IC= (A61F2/82 or A61F2/84 or A61F2/86 or A61F2/88 or
A61F2/90 or A61F2/92 or A61F2/94)) A61F2/86: Stents formed from
wire‐like elements.
The query resulted in 4100 unique families and a record set with A61F2/88: Formed as helical or
one publication per family was then prepared in which US, EP spiral coils (nets formed from
intersecting coils.
granted patents were preferred for being representative
members of their respective families.
A61F2/90: The wire‐like
elements forming a net
structure.
A61F2/92: Stents in the form of
a rolled‐up sheet expanding
after insertion into the vessel.
A61F2/94: Stents retaining
their form after locating in the
predetermined place.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 8. IP Activity or Publication Trend
What has been the IP publication trend for Coronary Stents
development in general?
How we did it?
When considering coronary stent patents as a whole, there is a Once the patents were
clear upward trend in IP publication. 1997 appears to be the year populated in Patent iNSIGHT
when research around the coronary stent really picked up Pro, the publication trend chart
momentum with about 100 records and climbed from there over was generated on a single click
the next 13 years to over 400 records in 2009. using the dashboard tool.
From the publication trend it appears the late 80’s and early 90’s Note: For the purpose of this IP
had some activity in this field but real pursuit for building IP publication trend, the
around the coronary stent happened only more recently in the classification of the records
into the 3 areas for coronary
last decade and has been quite consistent since.
stents was removed so the
trend displays IP activity for all
2007 would mark the peak publication mark in the trend with filings for coronary stents in
around 500 records for the year and a slight dip follow in the next general.
years. Going by the current trend for 2010, it seems IP activity
around coronary stents is still going strong.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 9.
Top Assignee Trends
Who have been the top assignees or the key players in Coronary
Stents?
Considering cumulative patent filing trends Boston Scientific has How we did it?
the most remarkable figures for IP publications for coronary
stents (that may also perhaps result from their acquisitive Once the patents were
strategy in the space – See Assignee Normalization in Appendix populated in Patent iNSIGHT
A). Abbott Labs, Johnson & Johnson with Medtronic Inc make up Pro, the assignee clean‐up
the next ranks in terms of IP publications. tools were used
• To locate assignees for
unassigned records,
While all these four companies have made consistent advances in
• To clean up records
growing their IP portfolio with coronary stent patents, Boston having multiple
Scientific appears to have made the biggest leaps from 2000 assignees.
onwards with over 660 records crossed for 2008. • To locate the correct
assignee names for US
Also, see full Assignee count table in following excel sheet: records using the US
assignments database.
• To normalize the
assignee names and
merge assignees that
Full Assignee table count resulted from a
merger or acquisition
or name change.
Please refer Appendix
A for more details on
Assignee
Normalisation.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 10.
Family Coverage of companies
Here we look analyze patent families to make a judgment of
filings across various patent offices.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 11.
How we did it?
The report also gives an overview of the filing trends of the key
A coverage analysis of the
assignees in these countries and the total number of forward selected patent portfolio was
citations received by each Assignee’s portfolio. done by using ‘Company 360°
Report’ tool in Patent iNSIGHT
Pro. The coverage analysis
included all family members of
4100 patents.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 12. Assignees vs Application Areas
Which assignees hold the maximum inventions across different
application areas of coronary stents?
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 13.
Abbott Labs dominate patent holdings for “Arterial Restenosis or
Rethrombosis” with 90 out of 230 patent records classified under
this application area with Johnson & Johnson, Medtronic Inc and How we did it?
Boston Scientific following with 49, 39 and 30 records
respectively. First the various application
areas of coronary stents were
For stents related to “Arteries in Chest, Boston Scientific heads identified by manual research.
the assignees with 117 out of a total 359 patents Then by using a combination of
semantic analysis tools such as
the clustering tools and
searching tools available in
Patent iNSIGHT Pro, patents
were categorized under the
different application areas.
Finally a co‐occurrence matrix
was generated to map the
application areas with the
assignees to identify which
assignees hold the strongest
portfolios in which application
areas.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 14. Assignees vs. Material Types
How is the Assignee portfolio spread across different material
types?
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 15.
In the above matrix leading patent holdings within each category How we did it?
of material type have been highlighted with stronger shades of
green for larger number of patents within that category. Boston First the various material types
used in coronary stents were
Scientific has a significant number of patents for Hybrid, Bio‐
identified by manual research.
Degradable Metal and Fabric stents with a majority of the total Then by using a combination of
patents for each of these material types. semantic analysis tools such as
the clustering tools and
Abbott Labs have an edge when it comes to co‐polymer based searching tools available in
stents, stainless steel and nickel titanium alloy stents while Patent iNSIGHT Pro, patents
Johnson & Johnson dominate the assignees chart when it comes were categorized under the
to Drug Coated / Eluting Stents with 96 out of a total 440 patents different material types.
for this category. Finally a co‐occurrence matrix
was generated to map the
material types with the
Looking purely at the total patents for each type of material
assignees to identify which
irrespective of the assignees, the material with maximum filings assignees hold the strongest
is co‐polymers with 691 records. portfolios in which material
types.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 16.
Materials Innovation Timeline
How has the innovation frequency varied across various materials
used in coronary stents?
With the dots representing patent publications / filings and the How we did it?
green lines indicating the timelines between the earliest and
First the various material types
latest filings across each material type, one can look into the
used in coronary stents were
relevance of each material type with respect to time. Bare metal identified by manual research.
Tantalum stents appear to be one of the earliest materials Then by using a combination of
adopted and one that innovators pursued the longest right till semantic analysis tools such as
present dat. Though there are long gaps in the timeline from the the clustering tools and
early days, the recent years have continued to see a lot of IP searching tools available in
activity. Patent iNSIGHT Pro, patents
were categorized under the
Similarly, Bio‐Absorbable Polymer Stents has visibly had a shorter different material types.
timeline with no new patents for this material type since 2007. The innovation time chart was
then generated using the
Co‐polymer stents however have received a lot of attention in
Patent iNSIGHT Pro dashboard.
the last decade and appear to be the material most assignees are
focusing on for the future.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 17. Key Application areas for different Stent Materials
What materials are being used for stents and how do they
compare across key application areas in the body?
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 18.
Material research is often largely dependent on the application How we did it?
area for which the stent is designed for. Stents being developed
for the treatment of cancer would have different requirements in The clusters of Application
terms of the best material choices as compared to arterial re‐ Areas and Material Types that
thrombosis. were created for the previous
analysis were correlated using
By comparison of the patent publications across different the co‐occurrence analyzer and
application areas for each material type, the matrix and chart can then the resulting matrix for
provide an insight into the material choices innovators are converted into a chart and a
heatmap.
leaning towards for these applications. For example, against
cancer treatment, the “Drug Coated / Eluting Stent” and “Co‐
polymers” have the most patents whereas “Co‐polymers” along
with a number of Metal Based stents are popular for Chest Artery
stents.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 20.
When it comes to innovations around developing coatings for How we did it?
stents Boston Scientific Corp leads the way for Endothelial Cells,
Inorganic Silicon Carbide, Inorganic Iridium Oxide and Porous First the various coatings used
Materials albeit marginally ahead of Johnson & Johnson in in coronary stents were
Porous Materials. Johnson & Johnson have a more patents when identified by manual research.
Then by using a combination of
it comes to Inorganic Carbon and Inorganic Gold coatings which is
of clustering and advanced
the research direction for coatings they seem to focus on. searching tools available in
Patent iNSIGHT Pro, patents
were categorized under the
different coatings. A co‐
occurrence matrix was further
generated to map the
assignees with coatings.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 21. Key Inventors Focus Areas
How we did it?
Who are the most prolific innovators in stent technology and how
We picked the top 3 inventors
do their interest compare with each other? and categorized their patents
using the auto cluster engine.
Robert Falotico of Johnson & Johnson, Stephen Pacetti of Abbott We then used the co‐
Labs and Jan Weber of Boston Scientific are found to be having occurrence analyzer to identify
maximum number of unique families in our search set. These the key areas of interest of the
three inventors account for a combined total of 163 unique 3 inventors and a co‐
families published for technology related to stent. occurrence matrix with heat
map was generated to observe
how these interests have
For a detailed chart which highlights their invaluable
evolved.
contributions within the space please download the chart in XLS
format here:
Key Inventors comparison table
Below is a timeline chart which provides and insight into the
interest areas pursued by one of the inventors Jan Weber.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 22.
Co-Citation Based Clustering
How are the records of top 5 assignees related based on their
cross‐citation relationships?
The map below shows patents of top 5 assignees clustered
together based on their cross citation linkages. In the map
patents that have a high degree of overlapping citations
have been clustered together. The map also shows the
various technologies these cluster of co‐citing patents are
dealing with.
Stent Crimping
(See Enlarged Image below)
Self expanding
Drug delivery
Bifurcated
Treating a vascular condition
S
Coiled Stent
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 24.
How we did it?
The VizMAP tool in Patent
iNSIGHT Pro was used for this
analysis. First the patents of
top 5 assignees were loaded on
the map. The map was then
analyzed in the co‐citation
mode. In this mode of analysis
the patents of the top 5
assignees got clustered
together based on co‐citing
patents. The patent viewer was
used to identify the
technologies these cluster of
co‐citing patents were talking
about. These technologies
were then labeled on the map
for every cluster.
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 25.
Portfolio Citation Analysis
The top 5 companies in the space have been aggressively
acquiring other firms that have promising and unique
technologies. Much of this M&A activity is based on the
ranking of the patent portfolios.
A portfolio that is frequently cited by many companies is
given a higher ranking usually in IP analysis. We randomly
selected two firms with relatively smaller patent portfolios
but with a higher degree of forward citations ‐ Medinol and
EV3 Inc.
Medinol’s patent portfolio contains 32 families in stent
technology. This portfolio has 604 forward citing records.
Also EV3’s patent portfolio has 18 families in stent
technology. This portfolio has 203 forward citing records.
You can also refer to the full forward citation table export
for a detailed description on these forward citing
documents.
Assignee Breakup of Medinol Ltd’s forward citations (single
generation):
Full Citation Table
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 26.
Assignee Breakup of EV3 Inc’s forward citations (single
generation): Full Citation Table
Full Citation Table
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 27. CLINIC FOUNDATION, COOK
INCORPORATED, WILLIAM
COOK EUROPE APS
Appendix A: Key Assignee Normalization Table
ABBOTT LABS
ADVANCED CARDIOVASCULAR SYSTEM, ABBOTT LABORATORIES,
PACETTI STEPHEN D, ABBOTT LAB VASCULAR ENTPR LTD,
BIOCOMPATIBLES UK LTD, BORGANKOW HARSHAD, ABBOTT LAB INC,
ABBOTT LAB, ABBOTT CARDIOVASCULAR SYSTEMS, BIOCOMPATIBLES
UK LTD CHAPMAN, ADVANCED CARRDIOVASCULAR SYSTE, ADVANCED
CARDIVASCULAR SYSTEMS, BIOCOMPATIBLES LTD, ADVANCED
CARDIOVASCULAR SYSTEMS, ABBOTT LAB VASCULAR ENTITIES L,
ADVANCED CARDIOVASULAR SYSTEMS, ADVANCED CARDIOVASCULAR
SYSTEMS INC
BOSTON SCIENTIFIC CORP
BOSTON SCIENT TECH INC, SCHNEIDER USA INC, SCHNEIDER INC,
ADVANCED STENT TECH INC, BOSTON SCIENT LTD, SCIMED LIFE
SYSTEMS INC, BOSTON SCIENTIFIC LIMITED, BOSTON SCIENT SCIMED
INC, ENDOTEX INTERVENTIONAL SYS INC, WEBER JAN, BOSTON SCIENT
SCIMED, CARDIAC PACEMAKERS INC, BOSTON SCIENT CORP, "Boston
Scientific Scimed, Inc.", BOSTON SCIENT SCRIMED INC, SCHNEIDER
EUROP AG, SCIMED LIFESYSTEMS INC, SCI MED LIFE SYSTEMS,
SCHNEIDER EUROP GMBH, ENDOTEX INTERVENTIONAL SYSTEM,
SCIMED LIFE SYTEMS INC, SMART THERAPEUTICS INC, TINI ALLOY
COMPANY, SCIMED LIFE SYSTEMS, BOSTON SCIENT SCIMED LIFE SYST,
BOSTON SCIENT SANTA ROSA CORP, BOSTON SCIMED INC, BOSTON
SCIENTIFIC SCIMED INC, ADVANCED STENT TECHNOLOGIES L
JOHNSON AND JOHNSON
CORDIS CORP, ETHICON INC, FISCHELL DAVID R, FISCHELL TIM A,
CONOR MEDSYSTEMS INC, JOHNSON AND JOHNSON MEDICAL KK,
FALOTICO ROBERT, ETHICON ENDO SURGERY INC, CORVITA CORP,
ISOSTENT INC, ISO STENT INC, ATRION MEDICAL PRODUCTS INC,
CORVITA EUROP, CORDIS CORPORTATION, CORDIS NEUROVASCULAR
INC, JOHNSON AND JOHNSON RES PTY LTD
MEDTRONIC INC
MEDTRONIC INC, MEDTRONIC AVE INC, TRANSVASCULAR INC,
MEDTRONIC VASCULAR INC, MEDTRONIC AVE, MEDTRONIC MINIMED
INC, INVATEC SRL, INVATEC S R 1, MEDTRONIC VASCULAR INC A
DELAWARE, MEDTRONIC VASSCULAR INC, Medtronic Inc., APPLIED
VASCULAR ENG INC, PERCUSURGE INC, MEDTRONIC INSTENT INC,
COREVALVE SA, ATS MED INC, VENTOR TECHNOLOGIES LTD
COOK GROUP
COOK WILLIAM EUROP, COOK INC, COOK WILLIAM A AUSTRALIA,
COOK BIOTECH INC, UNIV OREGON HEALTH and SCIENCE, WISLON
COOK MEDICAL INC, WILSON COOK MEDICAL INC, COOK CRITICAL CARE
INC, COOK UROLOGICAL INC, MED INST INC, WILLIAM COOK AUSTRALIA
PTY LTD, FALOTICO ROBERT, WILLIAMS A COOK AUSTRALIA PTY,
GLOBAL THERAPEUTICS INC, WILLIAM COOK EUROP AS, CLEVELAND
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 28.
Edwards Lifesciences AG
EDWARDS LIFESCIENCES CORP, EDWARDS LIFESCIENCES AG, WEST
WELDON DEAN
MED INSTITUTE INC
MED INST INC, COOK WILLIAM A AUSTRALIA, COOK INC, COOK
WILLIAM EUROP, DIERKING WILLIAM K, OHLENSCHLAEGER BENT
ORR DAVID E, RASMUSSEN ERIK E, ROEDER BLAYNE A, DIERKING
WILLIAM KURT, PETERSEN JESPER S
MEDINOL LTD
MEDINOL LTD, PINCHASIK GREGORY A, RICHTER JACOB, PINCHASIK
GREGORY
TERUMO CORPORATION
TERUMO CORP, JAPAN SCIENCE AND TECH AGENCY, IGAKI IRYO SEKKEI
KK, TOKUSEN KOGYO KK, VASCUTEK LTD
EV3 INC
INTRA THERAPEUTICS INC, EV3 INC, EV3 PERIPHERAL INC,
INTRATHERAPEUTICS INC
C R BARD INC
BARD INC C R
BIOTRONIK
BIOTRONIK MESS & THERAPIEG, BIOTRONIK MESS AND THERAPIEG,
BIOTRONIK VI PATENT AG, Biotronik Mess‐ und Therapiegeraete GmbH
& Co., Biotronik Mess‐und Therapiegeraete GmbH & Co.
Ingenieurbuero Berlin, BIOTRONIK GMBH AND CO KG, BIOTRONIK ME
UND THERAPIEGERAE, Biotronik Mess‐and Therapiegerate GmbH & Co.
Biotronik Mess‐ und Therapiegerate GmbH & Co. Ingenieurburo Berlin,
Biotronik Mess‐ und Therapiegeraete GmbH & Co. Ingenieurbuero
Berlin, BIOTRONIK MASS UND THERAPIEGER, Biotronik Mass‐und
Therapiegeraete GmbH & Co. Ingenieurbuero Berlin, Biotronik Mess ‐
und Therapiegeraete GmbH & Co. Ingenieurbuero Berlin, Biotronik
Mess‐ und Therapiegeraete GmbH & Co. Ingenieurbuero, Biotronik
Mess‐Und Therapiegeraete GmbH & Co.
XTENT INC
XTENT INC, XTENT INC A DELAWARE CORP
W L GORE and ASSOCIATES INC
GORE and ASSC, GORE ENTERPRISE HOLDINGS INC
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.
- 29.
Summary
Coronary Stents have been among the biggest breakthroughs in
healthcare and medicine having changed the lives of many since
its introduction in invasive surgery. While it’s still a comparatively
new technology considering it’s been around mostly in the last
decade there has been no signs of decline in the innovations and
advances that surround it especially in the current years. With
the research focus revolving around applications areas,
improving materials used and coatings for stents, there are a
number of different assignees and companies which spearhead
and lead initiatives within each area. The patent landscape which
has unfolded as we uncovered some basic insights into coronary
stent technology reveal this modern marvel of medicine is going
strong and we can only expect to see further improvements in
the near future.
About Patent iNSIGHT Pro
Patent iNSIGHT Pro™ is a comprehensive patent analysis platform
that allows you to accelerate your time‐to‐decision from patent
analysis activities. Designed from inputs by experienced patent
researchers, Patent iNSIGHT Pro easily blends into your existing
Research workflow. Patent iNSIGHT Pro is used by leading legal
services, Pharmaceutical & biotech, electronics companies and
research organization across US, Europe, South America and
India with more than 180 end users. Patent iNSIGHT Pro is
developed and marketed by Gridlogics, a research driven IT
Company specializing in providing intellectual property analysis
and visualization solutions to aid R&D and corporate strategy.
Gridlogics is headquartered in Pune, India and has a sales
presence in Delhi, Mumbai and USA.
For more information:
Visit us at: www.patentinsightpro.com
Or call us at: 1‐408‐786‐5524
Or mail us at: contact@patentinsightpro.com
© 2010 Gridlogics. All Rights Reserved.
Patent iNSIGHT Pro™ is a trademark of Gridlogics Technologies Pvt. Ltd.