Shopping mall is a group of retail stores under one roof. Shopping malls offer many advantage over traditional market as it provides convenience to a large number of people. The design of shopping mall should consider the Vaastu Sastra and building bye-laws, based on which orientation of each floor is designed. With the increase in technology, the impact of natural light and shadow can be easily shown in the design. Solar study helps in visualizing how, shadow from different terrain and surrounding building affect the site.

1. Under the esteemed guidance
of
K.MOUNIKA
(Assistant professor in civil
Engineering
Under the esteemed guidance of
K.Mounika
(Assistant professor in civil Engineering)
5D MODELLING AND SOLAR STUDY OF SHOPPING COMPLEX

2. ABSTRACT
INTRODUCTION
LITERATURE REVIEW
METHADOLOGY
CONCLUSION
REFERENCE

3. Drafting,Planning,3D modelling, scheduling, Cost Estimation and Solar study of shopping
mall.
Shopping mall is a group of retail stores under one roof.
The floor plans of shopping complex develop by using building bye-laws and Vaasthu Shastra.
Revit is the richest software for BIM.(building information modelling)
With the increase in technology the impact of natural light and shadow can be easily shown at
any particular season.
Solar study helps in visualizing how, shadow from different terrain and surrounding building
affect the site.

4. BIM
BUILDING INFORMATION MODELING (BIM) IS A PROCESS INVOLVING THE
GENERATION AND MANAGEMENT OF DIGITAL REPRESENTATIONS OF PHYSICAL
AND FUNCTIONAL CHARACTERISTICS OF PLACES.

5.  Objective- providing solution for limitations of local or street shopping , dealing with
large crowds, waiting too long to buy something, availability at single place.
Convenience
 Relaxed Shopping
 Prestige Shopping
 Product knowledge

6. Increasing the growth of the organized retail sector.
Monumental increment in economic growth.
Employment generation by the organized retail sector.
Good competition means better production and services.
There are lots of people to meet.
You can try on/test out before the buying.
You can do so much more than just shop.
It is the one stop shop.

7. The Relationship between Shopping Mall Attributes, Customer Satisfaction and Positive Word-Of-Mouth Volume
12 Issue 3 Version 1.0 March 2012- Chi Bo WONG, Hing Cheong NG, Kelly Ka Li WONG & Man Ho WONG
–
In this study observed that malls have become the place where senior citizens walk in comfort and security, where
parents lead their young to Santa Clauses, where singles court, where teenagers socialize and where everybody
consumes.
3D,4D and 5D Building Information Modeling for Commercial Building Projects -Somnath D. Khochare , Ashish
P. Waghmare 1,2 PG-Student,Dr .D. Y. Patil School of Engineering and Technology,Lohegaon,Pune
The consumers are attracted to malls because of the presence of well-known anchors - department stores with
recognized names. Anchors generate mall traffic that indirectly increases the sales of lesser-known mall stores.

8. Modelling and Project Planning Of a Structure by Implementing 5D BIM Technique Vol. 4, Issue 4, April 2016 -
Mudasir Amin Chowdary Professor and Head (P.G) Student, Dept. of Civil Engineering, NCET, VTU, Bangalore,
India
With everything from groceries and vegetables to footwear, apparels, cosmetics, furnishings & home decors
available underneath one roof, a growing middle class with higher disposable incomes is heading for the malls
considering it as “a one stop destination
Solar Shading and Building Energy Use-Marie-Claude Dubois
Influence of Solar Shading and Orientation on Indoor Climate-Marcelino Januário Rodriguês, Faculty of
Engineering, Department of Construction Sciences, Lund University
 International journal of Emerging Engineering Technology and Science
http://www.ijeets.org - Energy Analysis of Residential Building Using BIM

9.  Lighting solar studies produce single images that show shadow cast from the sun position in the active view.
 Evaluate the impact of natural light and shadows on the building and sites.

11.  The project consists of planning and estimation of the 5 storeys shopping
mall in plot area of (200000 sq. foots)
 Built up area: 113000 sq. f00ts
 Height of mall: 68’
 Rear side set back distance:22’
 Column size: 18”
 Flat slab is provided by considering shuttering problems and for better
architectural view.
 Floor space index: 2.82
GEOMETRIC DETAILS OF PROJECT

12. PLANNING
• VAASTU SASTRA
• BUILDING BYE LAWS
DRAFTING
• AUTODESK CAD
3D
MODELLING
• AUTODESK REVIT
SOLAR
STUDY
• AUTODESK REVIT

13.  The likes of software like AUTOCAD and REVIT are increasing more as it gives architectural
engineer and construction professional the insight and tools to more efficient plan design
construct and manage building.
 The parking is kept in basement so as to reduce the space occupied and the flow of traffic is
kept is concern.
 The 3d modelling of first floor,ground floor, and basement with the components is done.
 The 3d modelling of remaining floor and exterior solar study will be done soon.

15.  JOURNAL REFERENCE
Modelling and Project Planning Of a Structure by Implementing 5D BIM Technique- Mudasir
Amin Chowdary, Dr. Rajendra ,Vijay
Influence of Solar Shading and Orientation on Indoor Climate- Marcelino Januário Rodriguês
3D,4D and 5D Building Information Modeling for Commercial Building Projects- Somnath D.
Khochare , Ashish P. Waghmare
 BUILDING BYE-LAWS- Dr.N.KUMARA
 VAASTHU SASTRA