1. The complete integrated manufacturing solution
Inventor+InventorCAM
www.InventorCAM.com
SolidCAM - The Leaders in Integrated CAM
InventorCAM2008 R12
Getting started
2009
3. 3
Inventor+InventorCAM = The complete integrated manufacturing solution
InventorCAM 4
2.5D Milling 10
Feature Recognition 14
3D Milling 16
High Speed Machining 20
MULTI-Sided Machining 24
SIm. 5-axis Machining 28
Turning 32
MILL-TURN 36
Wire Cut 42
Training Materials 44
System requirements 45
4. 4
• Don’t go for less. Go for full integration.
InventorCAM is the Certified integrated CAM-Engine for Inventor.
InventorCAM provides seamless, single-window integration and full
associativity to the Inventor design model. All machining operations are
defined, calculated and verified, without leaving the Inventor window.
InventorCAM is used in the mechanical manufacturing, electronics, medical,
consumer products, machine design, automotive and aerospace industries,
mold, tool and die and rapid prototyping shops.
Today successful manufacturing companies are using integrated CAD/
CAM systems to get to market faster and reduce costs. With InventorCAM’s
seamless single-window integration in Inventor, any size organization can
reapthebenefitsof theintegratedInventor + InventorCAMmanufacturing
solution.
InventorCAM supports the complete set of manufacturing technologies.
Following is a brief description of the main InventorCAM modules.
InventorCAM
5. 5
Inventor+InventorCAM = The complete integrated manufacturing solution
• 2.5D Milling
InventorCAM provides both interactive and automated powerful 2.5D
milling operations on Inventor models. InventorCAM offers one of the
best pocketing algorithms in the market. Full tool path control and powerful
algorithms ensure that the user can manufacture the way he needs to.
Operations can be easily re-ordered, rotated, mirrored, etc. InventorCAM’s
automatic feature-recognition and machining module automates the
manufacturing of parts with multiple drills and complex holes.
All your needs for successful production machining are provided directly
inside Inventor with an easy and straightforward interface. InventorCAM is
successfullyusedinproductionenvironmentsbythousandsof manufacturing
companies and job shops.
• 3D Milling
InventorCAM’s 3D Milling can be used both for prismatic parts and for
complex 3D models. For prismatic parts InventorCAM analyzes the model
and automatically recognizes pockets and profiles to be machined using
Z-constant machining strategies. For complex 3D models, InventorCAM
offers powerful 3D machining, including integrated rest material options.
6. 6
• 3+2 Axis Multi-Sided Machining
With InventorCAM, programming and machining of multi-sided parts on
4- and 5-Axis machining centers is efficient and profitable. InventorCAM
is an industry leader in this type of machining. InventorCAM rotates the
Inventor model to the user-defined machining planes and automatically
calculates all necessary shifts and tilts for the 3D machining coordinate
systems.
InventorCAM enables flexible set-ups and reduces the need for special
clamping jigs. You can define your 2.5D and 3D machining operations on any
face and check them using InventorCAM’s advanced tool path verification.
The output is ready-to-run programs for your 4/5-axis CNC-machine.
• Simultaneous 5-Axis Machining
Simultaneous 5-axis machining is becoming more and more popular due to
the need for reduced machining times, better surface finish and improved
life span of tools. InventorCAM utilizes all the advantages of Simultaneous
5-Axis machining and together with collision control and machine
simulation, provides a solid base for your 5-axis solution.
7. 7
Inventor+InventorCAM = The complete integrated manufacturing solution
InventorCAM provides intelligent and powerful 5-axis machining strategies,
including swarfing and trimming, for machining of complex geometry parts
including mold cores and cavities, aerospace parts, cutting tools, cylinder
heads, turbine blades and impellers. InventorCAM provides a realistic
simulation of the complete machine tool, enabling collision checking
between the tool and the machine components.
• High Speed Machining (HSM) Module
InventorCAM HSM is a very powerful and market-proven high-speed-
machining module (HSM) for molds, tools and dies and complex 3D
parts. The HSM module offers unique machining and linking strategies for
generating high-speed toolpaths.
InventorCAM’s HSM module smooths the paths of both cutting moves and
retracts wherever possible to maintain a continuous machine tool motion–
an essential requirement for maintaining higher feedrates and eliminating
dwelling.
With InventorCAM HSM module, retracts to high Z levels are kept to a
minimum. Angled where possible, smoothed by arcs, retracts do not go any
higher than necessary – thus minimizing aircutting and reducing machining
time.
Any HSM 3D machining strategy can be controlled by specifying the
surface slope-angle to be machined or by specifying the machining
boundary. InventorCAM HSM module provides a comprehensive set of
boundary creation tools, including Silhouette boundaries, Cutter Contact
Area boundaries, Shallow boundaries, Theoretical Rest Area boundaries,
Rest Area boundaries and User-defined boundaries.
InventorCAM HSM module is a powerful solution for all users who demand
advanced high speed machining capabilities. It can also be used to improve
the productivity of older CNC’s with reduced air-cutting and smoothing
arcs that maintain continuous machine tool motion.
8. 8
The result of HSM is an efficient, smooth, and gouge-free tool path. This
translates to increased surface quality, less wear on your cutters, and a longer
life for your machine tools.
With demands for ever-shorter lead and production times, lower costs
and improved quality, High Speed Machining (HSM) is a must in today’s
machine shops.
• Turning and Mill-Turn
InventorCAMhasaverystrongcapabilityinturning,groovingandMill-Turn.
As in milling, a rest-machining capability is built in all turning operations.
InventorCAM supports all machine turning cycles. InventorCAM provides
special support for the advanced machining technologies of ISCAR’s Turn-
Groove tools.
9. 9
Inventor+InventorCAM = The complete integrated manufacturing solution
A powerful integrated Mill-Turn capability enables the turning and milling
operations to be programmed in the same environment. Access to the
complete 2.5-5 axis milling is available. InventorCAM provides support for
up to 5-Axis (XYZCB) Turn-Mill CNC machines including back-spindle
operations.
• 2/4 Axis Wire-EDM
InventorCAM Wire EDM handles profiles and tapers with constant and
variable angles, as well as 4-axis contours. InventorCAM’s intelligent
algorithms prevent the falling of material pieces by automatic pocket
processing. InventorCAM provides full user control of stop-points and of
wire cutting conditions at any point of the profile or taper.
10. 10
2.5D Milling
The 2_5D_Milling_1_IV.prz example illustrates the use of InventorCAM 2.5D Milling to
machine the cover part shown above. The machining is performed on a 3-axis CNC
machine in two setups, one for the top faces and one for bottom faces.
The following InventorCAM operations are created to perform the machining:
• Top face machining (FM_profile_T1)
This Face Milling operation performs the machining of the top face of
the cover. An end mill of Ø20 is used. The machining is performed in
two passes - rough and finish. A machining allowance of 0.2 mm remains
unmachined at the floor, after the rough pass, and is removed during the
finishing pass.
• External faces machining (F_profile1_T2; F_profile2_T2)
These operations perform the profile machining of the external contour of
the cover. An end mill of Ø16 is used. The Clear offset option is used at the
roughing stage to perform the machining in a number of equidistant offsets
from the machining geometry. The machining allowance is left unmachined
during the roughing operation and removed at the finishing stage.
• Bolt seats machining (F_profile3_T3)
This operation is used to remove the material at the bolt seat areas. An end
mill of Ø8 is used for the operation.
11. 11
Inventor+InventorCAM = The complete integrated manufacturing solution
• Bottom face machining (FM_profile4_T1)
This Face Milling operation performs the machining of the bottom face
of the cover. This operation uses the second Coordinate system; it means
that the second setup has to be performed at the CNC machine before
the machining. The used tool and the machining strategy are similar to the
FM_profile_T1 operation.
• Internal faces roughing (P_profile5_T2; P_profile6_T2)
These Pocket operations perform the rough machining of the internal faces
of the cover. An end mill of Ø16 is used. The rough machining is divided
into two operations to perform the machining with the optimal tool path
The machining allowance is left unmachined for further finish operations.
• Internal faces rest machining (P_profile6_T4)
This operation uses the rest material machining technique in order to
machine the areas left inaccessible for the large tools used in the previous
operations. An end mill of smaller diameter (Ø8) is used.
• Internal faces finishing (F_profile5_T4; F_profile7_T4)
These operations perform the wall finishing of the internal pocket area of
the cover part. An end mill of Ø6 is used.
• Floor faces finishing (F_profile7_T3; P_profile6_T4_1)
These operations perform the floor finishing of the internal pocket area of
the cover part. End mill tools of Ø6 and Ø8 are used.
• Slot machining (S_slot_T5)
This Slot Milling operation performs the machining of the groove at the
bottom face of the cover. An end mill of Ø1.5 is used.
• Holes machining D_drill_T6; D_drill_T7
These Drill operations perform the сenter drilling and drilling of the four
holes of Ø5 located at the bottom face of the cover.
• Threaded holes machining (D_drill1_T6; D_drill1_T8; D_drill1_T9)
These Drill operations perform the сenter drilling, drilling and threading of
the M2 holes located at the pads.
12. 12
2.5D Milling
The 2_5D_Milling_2_IV.prz example illustrates the use of InventorCAM 2.5D Milling to
machine the part shown above. The machining is performed on a 3-axis CNC machine
in two setups, using two InventorCAM Coordinate systems.
The following InventorCAM operations are created to perform the machining:
• Upper faces machining (F_profile_T1; F_profile1_T1)
These Profile operations remove the bulk of material performing the rough
and the finish machining of upper faces. An end mill of Ø16 is used. The
Clear offset option is used at the roughing stage to perform the machining
in a number of equidistant offsets from the machining geometry.
• Step faces machining (F_profile2_T1)
This operation performs the rough and finish machining of the step faces
using the Profile operation. An end mill of Ø16 is used.
• External contour machining (F_profile3_T1)
This operation performs the rough and finish machining of the external
model faces. An end mill of Ø16 is used.
13. 13
Inventor+InventorCAM = The complete integrated manufacturing solution
• Connector pocket machining (P_profile4_T1; P_profile5_T2;
F_profile13_T2; F_profile6_T2; P_profile4_T3
A number of Profile and Pocket operations are used to perform the rough
and finish machining of the connector pocket. End mill tools of Ø10; Ø3
and Ø4 are used. The Rest material strategy is used in the last operation to
complete the machining of the connector faces.
• Machine screw head areas (F_profile7_T3)
This operation performs the rough and finish machining of the screw head
areas. An end mill tool of Ø4 is used.
• Top and Bottom face machining (FM_profile1_T1;
FM_facemill1_T1)
Two Face Milling operation enable you generate the tool path for roughing
and finishing of the top and bottom faces. Note that the second operation
is used with the second Coordinate System, it means that the second setup
has to be performed at the CNC machine before the machining.
• Internal faces roughing (P_profile11_T1; P_profile12_T1)
These Pocket operations perform the roughing of the complex pocket
formed by the internal faces of the part. An end mill tool of Ø10 is used.
• Internal faces roughing (F_profile11_T3; F_profile12_T3;
P_profile8_T3; F_profile9_T3)
These Pocket and Profile operations perform the finish machining of the
wall and floor faces if the complex pocket roughed at the previous stage. An
end mill tool of Ø4 is used.
• Holes machining (D_drill_T4; D_drill1_T4; D_drill2_T4; D_drill_T5;
D_drill1_T6; D_drill2_T7;
These Drill operations perform center drilling and drilling of holes located
on the cover part faces.
14. 14
Feature Recognition
The drill_pocket_recognition_IV.prz example illustrates the use of InventorCAM
Automatic Feature Recognition to machine the mold base part shown above. The
machining is performed on a 3-axis CNC machine.
The following InventorCAM operations are created to perform the machining:
• Top face machining (FM_facemill_T1)
This Face Milling operation performs the machining of the top face of the
cover. A face mill of Ø40 is used.
• Pockets machining (PR_selected_faces_T2)
This Pocket Recognition operation automatically recognizes all the pocket
areas in the model and performs their machining. An end mill of Ø20
is used. The Open Pocket machining is used to perform the approach
movement from an automatically calculated point outside of the material.
The tool descends to the necessary depth outside of the material and then
moves horizontally into the material. A special machining strategy is applied
to the through pockets; they are deepened in order to completely machine
the pocket.
15. 15
Inventor+InventorCAM = The complete integrated manufacturing solution
• Center Drilling (DR_drill_r_T3)
This Drill Recognition operation automatically recognizes all the hole
features available for the machining with the current Coordinate System and
performs the center drilling of all the holes in the mold base. An spot drill
of Ø10 is used. The drilling depth is customized for each group of holes.
• Drilling (DR_drill_r1_T4; DR_drill_r2_T5; DR_drill_r3_T4;
DR_drill_r4_T6, DR_drill_r5_T7, DR_drill_r6_T8)
These Drill Recognition operations perform the machining of all the
hole features automatically recognized in the mold base. InventorCAM
automatically recognized the Upper Level and Drill depth from the model.
The through holes are extended in order to completely machine the holes.
16. 16
3D Milling
The 3D_Milling_1_IV.prz example illustrates the use of InventorCAM 3D Milling for the
machining of the mold core shown above.
The following InventorCAM operations are created to perform the machining:
• Roughing (3DR_target_T1)
This operation removes the bulk of material using the Contour roughing
strategy. An end mill of Ø20 is used. The machining is performed at the
constant-Z levels defined, using the Step down value of 5 mm. A machining
allowance of 0.5 mm remain unmachined for further finish operations.
• Rest material machining (3DR_target_T2)
This operation performs the rest material machining of the areas that
were inaccessible to the tool in the previous operation. An end mill tool of
smaller diameter (Ø16) is used. The Contour roughing strategy is utilized
in combination with the Rest material mode of the Working area definition
in order to obtain optimal and effective tool path removing the cusps left
after the previous operation. A machining allowance of 0.5 mm remains
unmachined for further finish operations.
17. 17
Inventor+InventorCAM = The complete integrated manufacturing solution
• Steep areas finishing (3DF_CZ_target_T3)
This operation performs the Constant-Z finishing of the steep areas of
the core. With this strategy, InventorCAM machines a number of planar
sections, parallel to the XY plane, using profile machining. A ball nose
mill of Ø10 is used. The machining is performed for the steep areas, with
inclination angle from 30° to 90°
• Shallow areas finishing (3DF_CS_target_T3)
This operation performs the Constant Stepover finishing of the shallow
areas of the core. With this 3D Milling strategy InventorCAM generates
a number of tool paths, at specified constant offset (Step over) from each
other, measured along the surface. The machining is performed for the
shallow areas, with inclination angle from 0° to 32°. A ball nose mill of Ø10
is used.
• Parting surface finishing (3DF_Lin_target_T3)
This operation performs the Linear finishing of the parting surface of the
core. In linear finishing, InventorCAM generates a line pattern on a 2D
plane above the model and then projects it on the 3D Model. The Step over
value determines the constant distance between adjacent lines of the linear
pattern, created on the 2D plane before being projected. A ball nose mill of
Ø10 is used. The defined Drive/Check surfaces enable you to perform the
machining of the parting surfaces only, avoiding unnecessary contact with
the already machined faces.
18. 18
3D Milling
The 3D_Milling_2_IV.prz example illustrates the use of InventorCAM 3D Milling for
prismatic part machining.
The following InventorCAM operations are created to perform the machining:
• Roughing (3DR_target_T1)
These operations remove the bulk of material using the Contour roughing
strategy. An end mill of Ø14 is used. The Open Pocket machining is used
to perform the approach movement from an automatically calculated point
outside of the material. The tool descends to the necessary depth outside
of the material and then moves horizontally into the material. A machining
allowance of 0.2 mm remain unmachined on floor and wall faces for further
finish operations.
• Rest material machining (3DR_target_T2; 3DR_target_T3)
At this stage the rest material machining is performed for the corner areas,
that were inaccessible by the tool in the previous operation. The machining
is performed in two operations using end mills of Ø8 and Ø5, in order
to minimize the tool load. The Contour roughing strategy is utilized in
combination with the Cut only in Rest material option in order to obtain
optimal tool path A machining allowance of 0.2 mm remain unmachined
on the floor and wall faces for further finish operations.
19. 19
Inventor+InventorCAM = The complete integrated manufacturing solution
• Vertical walls finishing (3DF_CZ_target_T4)
This operation performs the Constant-Z Wall finishing of the vertical walls
areas of the part. With this strategy, InventorCAM generates a number of
profile passes along the Z-axis, with a constant Step down. An end mill of
Ø4 is used.
• Horizontal floor finishing (3DF_CZ_target_T4_1)
This operation performs the Constant-Z Floor finishing of the horizontal
floor areas of the part. With this strategy, InventorCAM generates a number
of pocket passes on the horizontal faces, parallel to the XY-plane of the
current Coordinate System. An end mill of Ø4 is used.
20. 20
High Speed Machining
The hsm_1_IV.prz example illustrates the use of several InventorCAM High Speed
Machining (HSM) strategies to machine the mold cavity shown above.
The following InventorCAM operations are created to perform the machining:
• Rough machining (HSM_R_Cont_target_T1A)
This operation performs contour roughing of the cavity. An end mill of
Ø20 is used with a Step down of 3 mm. A machining allowance of 0.5 mm
remain unmachined for further semi-finish and finish operations.
• Rest roughing (HSM_RestR_target_T2A)
This operation performs rest roughing of the cavity. A bull nosed tool of
Ø12 and corner radius of 2 mm is used with a Step down of 1.5 mm to
remove the steps left after the roughing. The same machining allowance as
in roughing operation is used.
• Steep faces semi-finishing (HSM_CZ_target_T3A)
This operation performs Constant Z semi-finishing of the steep faces (from
40° to 90°). A ball nosed tool of Ø10 is used for the operation. A machining
allowance of 0.25 mm remain unmachined for further finish operations.
The Apply fillet surfaces option is used to add virtual fillets that will smooth
the tool path at the corners.
21. 21
Inventor+InventorCAM = The complete integrated manufacturing solution
• Shallow faces semi-finishing (HSM_Lin_target_T3A)
This operation performs Linear semi-finishing of the shallow faces (from
0° to 42°). A ball nosed tool of Ø10 is used for the operation. A machining
allowance of 0.25 mm remain unmachined for further finish operations.
The Apply fillet surfaces option is used.
• Corners rest machining (HSM_RM_target_T4A)
This operation uses the Rest Machining strategy for semi-finishing of the
mold cavity corners. The semi-finishing of the model corners enables you
to avoid tool overload in the corner areas during further finishing. A ball
nosed tool of Ø6 is used for the operation. A virtual reference tool of
Ø12 is used to determine the model corners where the rest machining is
performed. A machining allowance of 0.25 mm remain unmachined for
further finish operations.
• Steep faces finishing (HSM_CZ_target_T5A)
This operation performs Constant Z finishing of the steep faces (from 40°
to 90°). A ball nosed tool of Ø8 is used for the operation. The Apply fillet
surfaces option is used.
• Shallow faces finishing (HSM_Lin_target_T5A)
This operation performs Linear finishing of the shallow faces (from 0° to
42°). A ball nosed tool of Ø8 is used for the operation. The Apply fillet
surfaces option is used.
• Corners rest machining (HSM_RM_target_T6A)
This operation uses the Rest Machining strategy for finishing of the model
corners. A ball nosed tool of Ø4 is used for the operation. A virtual
reference tool of Ø10 is used to determine the model corners where the
rest machining is performed.
• Chamfering (HSM_Bound_target_T7)
This operation uses the Boundary Machining strategy for the
chamfering of upper model edges. A taper tool is used for the operation.
The chamfer is defined by the external offset of the drive boundary and by
the Axial thickness parameter.
22. 22
High Speed Machining
The hsm_2_IV.prz example illustrates the use of several InventorCAM HSM strategies to
machine the electronic box shown above.
The following InventorCAM operations are created to perform the machining:
• Rough machining (HSM_R_Cont_target1_T1A)
This operation performs the contour roughing of the part. An end mill
of Ø30 is used with a Step down of 10 mm to perform the roughing. A
machining allowance of 0.5 mm remain unmachined for further semi-finish
and finish operations.
• Rest roughing (HSM_RestR_target1_T2A)
This operation performs the rest roughing of the part. A bull nosed tool
of Ø16 and corner radius of 1 mm is used with a Step down of 5 mm to
remove the steps left after the roughing. The same machining allowance as
in the roughing operation is used.
• Upper faces machining (HSM_CZ_target_T3A)
This operation performs Constant Z finishing of the upper vertical model
faces upto a certain depth. A bull nosed tool of Ø12 and corner radius of
0.5 mm is used.
23. 23
Inventor+InventorCAM = The complete integrated manufacturing solution
• Bottom faces machining (HSM_CZ_target_T3A_1)
This operation performs Constant Z finishing of the bottom vertical model
faces. A bull nosed tool of Ø12 and corner radius of 0.5 mm is used.
• Flat faces machining (HSM_CZF_target1_T3A)
This operation performs Horizontal Machining of the flat faces. A bull
nosed tool of Ø12 and corner radius of 0.5 mm is used.
• Inclined faces machining (HSM_CZ_target1_T4A)
This operation performs Constant Z Machining of the inclined faces. A
taper mill of 12° angle is used to perform the machining of the inclined face
with large stepdown (10 mm). Using such a tool enables you to increase the
productivity of the operation.
24. 24
MULTI-Sided Machining
The multi_sided_machining_1_IV.prz example illustrates the use of InventorCAM Multi-
sided machining to machine the manifold plate shown above, using a 5-axis CNC
Machine. The initial stock for this example comes from casting.
The following InventorCAM operations are created to perform the machining:
• Top face machining (FM_profile_T1)
This Face Milling operation performs the machining of the top face of the
cover. An end mill of Ø16 is used. The machining is performed in two passes
- rough and finish. A machining allowance of 0.2 mm remain unmachined
at the floor after the rough pass and removed during the finishing pass.
Position #1 of the Machine Coordinate system is used for the operation.
• Front hole machining (D_drill_T2; D_drill_T3; D_drill_T4;
F_profile1_T1)
These operations are used for the front hole machining using Position #2
of the Machine Coordinate system. The Drill operations perform center-
drilling and two steps drilling of the hole. The Profile operation is used for
the machining of the connector faces around the hole.
25. 25
Inventor+InventorCAM = The complete integrated manufacturing solution
• Left hole machining (D_drill1_T2; D_drill1_T3; D_drill1_T4;
F_profile2_T1)
These operations are used for the left hole machining using Position #3
of the Machine Coordinate system. The sequence of the Drill and Profile
operations is similar to the sequence used for the front hole machining.
• Back hole machining (D_drill2_T2; D_drill2_T3; D_drill2_T4;
F_profile3_T1)
These operations are used for the left hole machining using Position #4
of the Machine Coordinate system. The sequence of the Drill and Profile
operations is similar to the sequence used for the front hole machining.
• Right hole machining (D_drill3_T2; D_drill3_T3; D_drill3_T4;
F_profile4_T1)
These operations are used for the left hole machining using Position #5
of the Machine Coordinate system. The sequence of the Drill and Profile
operations is similar to the sequence used for the front hole machining.
• Top holes machining (P_profile5_T5; D_drill4_T2; D_drill4_T6;
D_drill4_T7; D_drill5_T2; D_drill5_T8; F_profile6_T5)
These operations are used for the machining of the holes located on the top
faces of the model. Position #1 of the Machine Coordinate system is used
for all the operations.
26. 26
MULTI-Sided Machining
The multi_sided_machining_1_IV.prz example illustrates the use of InventorCAM Multi-
sided machining to complete the machining of the clamp part shown above, using a
5-axis CNC Machine.
The following InventorCAM operations are created to perform the machining:
• Top face machining (FM_profile1_T1)
This Face Milling operation machines the top inclined face of the clamp.
Machine Coordinate system #1 (Position #2) is used for the operation.
• Back face machining (FM_profile2_T1)
This Face Milling operation machines the back inclined face of the clamp.
Machine Coordinate system #1 (Position #3) is used for the operation.
• Front face machining (FM_profile3_T1)
This Face Milling operation machines the front inclined face of the clamp.
Machine Coordinate system #1 (Position #4) is used for the operation.
27. 27
Inventor+InventorCAM = The complete integrated manufacturing solution
• Openings machining (F_profile4_T1)
This Profile operation machines two openings, located on the front inclined
face of the clamp. Machine Coordinate system #1 (Position #4) is used for
the operation.
• Slot machining (P_profile5_T2; P_profile6_T2)
These Pocket operations machines the slot faces located on the top inclined
face of the clamp, using the Contour strategy. Machine Coordinate system
#1 (Position #2) is used for the operation.
• Hole machining (P_profile7_T2; D_drill_T3 D_drill_T4)
These operations machine the inclined counterbore hole, located on the top
inclined face of the clamp. Machine Coordinate system #1 (Position #5) is
used for the operation.
• Bottom face machining (FM_profile8_T1)
This Face Milling operation machines the bottom inclined face of the clamp.
Machine Coordinate system #2 (Position #1) is used for the operation.
28. 28
SIm. 5-axis Machining
The sim_5_axis_1_IV.prz example illustrates the use of the InventorCAM Sim. 5 axis
module for turbine blade machining.
The following Sim. 5 axis operations are used to perform the semi-finish and finish
machining of the turbine blade:
• Blade Semi-finishing
(5X_selected_faces_T1; 5X_selected_faces_T2)
The first operation provides the semi-finish of the turbine blade, using a
bull nosed tool of Ø16 with a corner radius of 4 mm. A combination of
the Parallel Cuts strategy and Spiral Cutting method is used to perform the
spiral machining of the blade.
The tool tilting is defined using the Tilted relative to cutting direction option,
with lag angle of 20°. The tool contact point is defined at the front tool face.
This combination of parameters enables you to perform the machining by
the toroidal surface of the tool.
Gouge checking is performed to avoid the possible collisions of the tool
with the planar surface of the blade base. The remaining material will be
machined at a later stage, using a special tilting strategy.
29. 29
Inventor+InventorCAM = The complete integrated manufacturing solution
The second Sim. 5-axis operation provides semi-finishing of the blade
area, close to the blade base. This area was not machined in the previous
operation because of the gouge protection. A bull nosed tool of Ø8, with
a corner radius of 2 mm, is used for the operation. Similar to the previous
operation, a combination of the Parallel Cuts strategy and Spiral Cutting
method is used to perform the spiral machining of the blade.
The tool tilting is defined using the Tilted relative to cutting direction option,
with a lag angle of 20°. In addition to the lag angle, a side tilting angle of 10°
is defined to avoid the gouging of the planar face of the blade base.
• Blade finishing (5X_selected_faces_T3)
This operation performs the finishing of the blade. A bull nosed tool of
Ø8, with a corner radius of 2.5 mm, is used for the operation.
The tool tilting is defined using the Tilted relative to cutting direction option
with a lag angle of 20°. In addition to the lag angle, a side tilting angle of 10°
is defined to avoid the gouging of the planar face of the blade base.
30. 30
SIm. 5-axis Machining
The sim_5_axis_2_IV.prz example illustrates the use of the Sim. 5 axis operation for an
aerospace part machining.
A number of Sim. 5 axis operations are defined in order to perform the finish machining
of the inclined faces of the aerospace frame and their adjacent fillets. The inclined faces
are forming an undercut area that cannot be machined using 3 axis milling; we have to
use 5 axis milling, with the appropriate tilting strategy, to machine the inclined faces.
• Inclined walls finishing
(5X_selected_faces1_T1; 5X_selected_faces2_T1;
5X_selected_faces3_T1)
These operations perform the finish machining of the inclined walls.
A ball nosed tool of Ø4 is used for the operation.
The Parallel Cuts strategy is used to generate a number of cuts parallel to the
XY plane of the coordinate system.
The tool tilting is defined using the Tilted relative to cutting direction option
with a lag angle of 90°. These parameters enable you to perform the
machining with the side face of the tool.
31. 31
Inventor+InventorCAM = The complete integrated manufacturing solution
• Fillet machining
(5X_selected_faces4_T1; 5X_selected_faces5_T1;
5X_selected_faces6_T1)
These operations perform the finish machining of the fillets adjacent to
the walls.
A ball nosed tool of Ø4 is used for the operation.
The Project curves strategy is used to generate a single pencil milling pass,
machining the fillets.
The Tilted through curves tilting strategy is used to perform a smooth
transition between different tool axis orientations.
32. 32
Turning
The turning_1_IV.prz example illustrates the use of the InventorCAM Turning for the
machining of the part shown above.
The following Turning operations are used to perform the machining of the part:
• External Roughing (TR_profile_T1A)
This operation is used to generate the tool path for the external faces
roughing. An External roughing tool is used for the operation. The Long
Process type is chosen for the operation to perform the machining in
longitudinal direction. The Rough Work type is chosen for the operation;
with this Work type the rough machining is performed in a number of
equidistant passes.
• Facial Turning (TR_profile1_T1A)
This operation is used to generate the tool path for the front face machining.
An External roughing tool is used for the operation. The Face Process type is
chosen for the operation to perform the machining in facial direction. The
Rough work type is chosen for the operation; with this work type the rough
machining is performed in a number of equidistant passes.
• Drilling (DRILL__T2A)
This Drill operation is used to perform the rough machining of the hole. A
U-Drill tool of Ø28 is used for the operation.
33. 33
Inventor+InventorCAM = The complete integrated manufacturing solution
• External Finishing (TR_profile_T3A)
This Turning operation is used to perform the external faces finishing.
The Profile Work type is chosen to generate the finishing pass. An External
roughing tool is used for the operation.
• Internal Turning (TR_profile2_T4A)
This Turning operation is used to perform the internal faces finishing.
The Profile Work type is chosen to generate the finishing pass. An Internal
roughing tool is used for the operation.
• External Grooving (GR_profile3_T5A)
This Grooving operation is used to perform rough and finish machining
of the external groove faces. An External grooving tool is used for the
operation.
• Internal Grooving (GR_profile4_T6A)
This Grooving operation is used to perform rough and finish machining
of the internal groove faces. An Internal grooving tool is used for the
operation.
• External Threading (TH_profile5_T7A)
This Threading operation is used to perform the machining of the external
thread with the minimal diameter of 56 mm and pitch of 1.5 mm. An
External threading tool is used for the operation.
• Internal Threading (TH_profile6_T8A)
This Threading operation is used to perform the machining of the internal
thread with the maximal diameter of 33.5 mm and pitch of 1.5 mm. An
Internal threading tool is used for the operation.
• Parting (GR_profile7_T9A)
This Grooving operation is used to perform the parting (cut-off) of the
machined part from the stock bar. The Cut Work type is used for the
operation. An External grooving tool is used for the operation.
34. 34
Turning
The turning_2_IV.prz example illustrates InventorCAM functionality for Rest Material
machining, during longitudinal and facial rough/finish turning operations, performed on
the wheel part shown above.
The following Turning operations are used to perform the machining of the part:
• External Roughing (TR_profile_T1A)
This operation is used to generate the tool path for the external faces
roughing. An External roughing tool is used for the operation. The Long
Process type is chosen for the operation to perform the machining in the
longitudinal direction. The Rough Work type is chosen for the operation;
with this Work type the rough machining is performed in a number of
equidistant passes.
• External Rest Material Roughing (TR_profile_T2A)
This operation utilizes the Rest Material option to perform the machining
of the areas left unmachined after the previous operation. These areas were
unmachined because of the orientation and geometry of the tool used in
the previous operation. In this operation a tool with opposite orientation is
used to machine the part, moving in the positive Z-direction.
35. 35
Inventor+InventorCAM = The complete integrated manufacturing solution
• External Finishing (TR_profile1_T3A)
This Turning operation is used to perform the external faces finishing.
The Profile Work type is chosen to generate the finishing pass. An External
Contour tool is used for the operation to avoid leaving unmachined areas
during the external finish.
• Facial Roughing (TR_profile2_T4A)
This operation is used to generate the tool path for the front face roughing.
An External roughing tool is used for the operation. The Face Process type is
chosen for the operation to perform the machining in facial direction. The
Rough work type is chosen for the operation; with this work type the rough
machining is performed in a number of equidistant passes.
• External Rest Material Roughing (TR_profile2_T5A)
This operation utilizes the Rest Material option to perform the machining
of the areas left unmachined after the previous operation. These areas were
unmachined because of the orientation and geometry of the tool used in
the previous operation. In this operation the tool with opposite orientation
is used to machine the part, moving in the positive X-direction.
• External Facial Finishing (TR_profile2_T4A_1)
This Turning operation is used to perform the front face finishing. The
Profile Work type is chosen to generate the finishing pass. An External
roughing tool is used for the operation.
• External Rest Material Finishing (TR_profile2_T5A_1)
This operation utilizes the Rest Material option to perform the machining
of the areas left unmachined after the previous finishing operation. These
areas were unmachined because of the orientation and geometry of the
tool used in the previous operation. In this operation the tool with opposite
orientation is used to machine the part, moving in the positive X-direction.
The Profile Work type is chosen to generate the finishing pass.
• Hole machining (DRILL__T6A)
This Drill operation is used to perform the machining of the hole. A
U-Drill tool of Ø40 is used for the operation.
36. 36
MILL-TURN
The mill_turn1_IV.prz example illustrates the use of the InventorCAM Mill-Turn
module for the machining of the optical part shown above, on a 4-axis Mill-Turn CNC-
Machine.
The following Turning and Milling operations are used to perform the machining of the
part:
• Turning
(TR_profile1_T1; TR_profile1_T1_1; DRILL__T7; TR_profile10_T8)
These turning operations are used to generate the tool path for the rough
and finish machining of the external and internal cylindrical faces.
• Facial Milling (F_profile2_T2; D_drill3_T6; D_drill4_T6)
These operations perform the machining of the screw slot and four holes
using InventorCAM capabilities for facial milling. Position #1 of Coordinate
System #1 is used to perform the facial machining.
• Machining of the side faces (P_profile3_T3)
This Pocket operation is used to perform the machining of the side faces of
the model. The Contour strategy is used in combination with a negative Wall
offset value in order to generate an overlapping tool path that completely
machines the faces.
CoordSys Position #3 is used for the operation. The Transform option is
used to create a circular pattern of operations around the revolution axis.
37. 37
Inventor+InventorCAM = The complete integrated manufacturing solution
• Drilling on the side face (D_drill_T4)
This Drill operation is used to perform the machining of two holes located
on the side face of the model. CoordSys Position #3 is used for the
operation.
• Slot machining (F_profile5_T2)
This Profile operation is used to perform the machining of the slot using
indexial 4-axis milling.
Position #4 of Coordinate System #1 is used for the operation.
An end mill of Ø2.5 is used for the operation.
• Radial holes machining
(D_drill1_T5; P_profile6_T2; D_drill2_T5; P_profile7_T2)
These Drill and Pocket operations are used to perform the machining of
three counterbore holes located on the cylindrical face.
Position #5 and Position #6 of Coordinate System #1 are used for the
operations.
• Pocket machining (P_profile9_T2)
This Pocket operation is used to perform the simultaneous 4-axis machining
of the pocket, wrapped on the external face of the part. Position #2 of
Coordinate System #1 is used to perform the pocket machining. An end
mill of Ø2.5 is used for the operation.
The Wrap option, chosen during the machining geometry definition, enables
you to define the wrapped geometry of the pocket directly on the solid
model.
The Contour strategy is chosen for the pocket machining.
38. 38
Mill-Turn
The mill_turn_2_IV.prz example illustrates the use of the InventorCAM Mill-Turn
module for the machining of the console part shown above on a 5-axis Mill-Turn CNC-
Machine.
The following Turning and Milling operations are used to perform the machining of the
part:
• Turning (TR_profile_T1)
This turning operation is used to generate the tool path for the rough and
finish machining of the external cylindrical faces.
• Indexial milling (F_profile6_T2)
This Profile operation is used to perform the machining of the cube
sides using the InventorCAM indexial milling capabilities. Position #2 of
Coordinate System #2 is used for the operation. The Transform option is
used to create a circular pattern of operations around the revolution axis in
order to machine all the cube faces.
An end mill of Ø16 is used for the operation.
• Horizontal faces machining (F_profile1_T2)
This Profile operation is used to perform the indexial milling of the
horizontal faces at the front part of the console. Position #4 of Coordinate
System #1 is used for the operation.
39. 39
Inventor+InventorCAM = The complete integrated manufacturing solution
The Transform option is used to create a circular pattern of operations
around the revolution axis in order to machine both sides of the console’s
front part.
• Inclined faces machining (F_profile3_T2; F_profile4_T2)
These Profile operations are used to perform the machining of the inclined
faces using the B-axis. CoordSys positions #5 and #6 are used for these
operation.
An end mill of Ø16 is used for the operations.
• Cylindrical face machining (F_profile2_T2A)
This Profile operation is used to perform the machining of the cylindrical
face at the front part of the console. Position #4 of Coordinate System #1
is used for the operation.
An end mill of Ø16 is used for the operations.
• Pocket machining (P_profile9_T3)
This Pocket operation is used to perform the machining of the pocket
located on the inclined faces, using the B-axis. Position #5 of Coordinate
System #1 is used for the operation.
An end mill of Ø6 is used for the operation.
• Inclined faces machining (F_profile7_T2; F_profile8_T2)
These Profile operations are used to perform the machining of the inclined
faces on the cube, using the B-axis. CoordSys positions #7 and #8 are used
for the operation.
An end mill of Ø16 is used for the operation.
• Hole machining (D_drill_T4; D_drill1_T5; D_drill2_T6; D_drill3_T6)
These Drill operations are used to perform the machining of the inclined
faces on the cube, using the B-axis. CoordSys positions #4, #6, #7 and #8
are used for the operations.
40. 40
mill-Turn - 2 spindles
The back_spindle_IV.prz example illustrates the use of the InventorCAM Back Spindle
functionality for the machining of the connector part shown above, on a 5-axis Mill-
Turn CNC-Machine.
The following Turning and Milling operations are used to perform the machining of the
part:
• Turning and front side milling (TR_profile_T1A; TR_profile_T1A_1;
DRILL__T2A; F_profile1_T3A; TR_profile2_T4A)
These operations are used to perform turning and facial milling of the front
faces of the connector. Position #1 of Coordinate System #1 is used for
the operation. The back spindle is not used in these operations; only the
main spindle is used.
• Indexial machining of the middle part
(F_profile6_T5A; D_drill2_T6A; D_drill2_T7A; F_profile7_T8A)
These Profile and Drill operations are used to perform the machining of
the pads and holes located around the cylindrical surface, in the middle
part of the connector. Position #5 of Coordinate System #1 is used for
the operation. The Back Spindle Connect operation is defined before these
operations, enabling the combined use of both spindles (main and back) in
these operations.
41. 41
Inventor+InventorCAM = The complete integrated manufacturing solution
• Indexial machining of the back part
(P_profile8_T9A; D_drill3_T10A)
These Profile and Drill operations are used to perform the machining of
the pads and holes located around the conical surface, in the middle part
of the connector. Position #6 of Coordinate System #1 is used for the
operation. The Back Spindle MoveBack operation is defined before these
operations, causing the retract of the back spindle, so that these operations
are performed with the main spindle only.
• Turning and back side milling
(TR_profile9_T1B; F_profile10_T11A; DRILL_T12A; TR_profile11_
T13A; F_profile12_T14A; D_drill4_T15A; D_drill4_T16A)
These operations are used to perform turning and facial milling of the
back faces of the connector. Position #1 of Coordinate System #1 is used
for turnings operation. Position #4 of Coordinate System #1 is used for
milling operations. The Back Spindle Transfer operation is defined before
these operations, causing the transfer of the part from the main spindle to
the back spindle. The machining is performed on the part clamped in the
back spindle.
42. 42
Wire Cut
The wire_cut_IV.prz example illustrates the use of the InventorCAM Wire Cut module
for the plate part machining.
The following Wire Cut operations are used to perform the machining of the part:
• Central cut machining (F_profile4)
This Profile operation is used to machine the central through cut. The
Later option is used for the Auto Stop technology, generating a postponed
separate sub-operation preventing the material dropping.
• Front cut machining (F_profile5)
This Profile operation is used to machine the through cut located in the
front area of the part. The Later option is used for the Auto Stop technology,
generating a postponed separate sub-operation preventing the material
dropping.
• Cylindrical holes machining (F_profile7)
This Profile operation is used to machine two through cylindrical holes,
located on the top face of the model.
43. 43
Inventor+InventorCAM = The complete integrated manufacturing solution
• Countersink machining (A_profile8; F_profile8)
The Angle operation is used to machine the six countersink cones of 90°.
The insertion points of the wire are chosen close to the hole centers,
where the preparatory drilling is performed. The Angle operation tool path
is generated in such a way so as to obtain the necessary diameter of the
cylindrical part of the hole (8.1 mm) at the necessary depth (4.45 mm).
The Profile operation performs the machining of the cylindrical part of the
countersink hole.
44. 44
Training Materials
The following training courses are suitable both for InventorCAM frontal training and
for self study.
• Milling Training Course: 2.5D Milling
• Milling Training Course: 3D Milling
• Turning Training Course
• Turn-Mill Training Course
• Advanced Training Course
These documents are available in the following format: PDF for on-line use +
Examples
The following user guides for InventorCAM are available.
• Milling User Guide
• HSM User Guide
• Sim. 5-axis User Guide
• Turning User Guide
• Wire Cut User Guide
The PDF versions of user guides are available for download from the Download area of
InventorCAM Web site: www.InventorCAM.com.
On-line help, based on these user guides, is available within InventorCAM.
45. 45
Inventor+InventorCAM = The complete integrated manufacturing solution
System requirements
• Microsoft® Windows XP Professional with Service Pack 2 (recommended),
Microsoft® Windows XP Professional x64 Edition, Windows 2000 with Service
Pack 3 or 4
• Intel® Pentium™, Intel® Xeon™, Intel® Core™, Intel® Core™2 Duo, Intel®
Core™2 Quad, AMD® Athlon™, AMD Athlon™ X2 Dual-Core - class processor
(emphasized processors are recommended).
• 1 GB RAM or more (2 GB or more recommended for large CAM-Parts
machining)
• An OpenGL workstation graphics card (512 MB RAM recommended) and
driver
• Mouse or other pointing device
• CD drive
• Internet Explorer version 6 if you are using the InventorCAM online help
• For viewing InventorCAM User Guides and Training Courses, Adobe Acrobat
version 8.1.2 or higher is recommended.