Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.
ROOF TRUSSES
FINK TRUSS - W-TYPE

DRAWN BY
MICHAEL NAUTH
The roof triangle usually is isosceles (equal sides) and it extends from
wall to wall at its base. The two sides meet in t...
The slope or angle of the roof is stated as a unit rise (in ins.) over the
unit run (12”), in this case 7/12. The Span of ...
The top chords of the roof truss are placed above the roof triangle and
the bottom chord is placed below. The Span in then...
The centre of the compression webs run from the ¼ point on the top
chord to the ⅓ point on the bottom chord. N.B. The ¼ po...
The tension webs run from the peak to meet the compression web at the
bottom chord.
Triangular bearing blocks are placed between the top and bottom chords to
transfer roof load to the bottom chord and then ...
Gussets (metal or plywood) are applied to both sides of the truss to keep
the joints together. The truss plant applies met...
The components of the truss are labelled. The base of the truss triangle
is the sum of the Total Run and the Projection. T...
Using Similar Triangles, the length (X) of the Top Chord is determined.
X/42 = 13.89/12
X = (42 x 13.89)
12 = 48.615” or 4...
Nächste SlideShare
Wird geladen in …5
×

Fink truss (w type)

13.697 Aufrufe

Veröffentlicht am

Veröffentlicht in: Business, Technologie
  • The #1 Woodworking Resource With Over 16,000 Plans, Download 50 FREE Plans...  https://bit.ly/2SyPceJ
       Antworten 
    Sind Sie sicher, dass Sie …  Ja  Nein
    Ihre Nachricht erscheint hier
  • ➤➤
       Antworten 
    Sind Sie sicher, dass Sie …  Ja  Nein
    Ihre Nachricht erscheint hier
  • Dating direct: ❶❶❶ http://bit.ly/39pMlLF ❶❶❶
       Antworten 
    Sind Sie sicher, dass Sie …  Ja  Nein
    Ihre Nachricht erscheint hier
  • Dating for everyone is here: ❤❤❤ http://bit.ly/39pMlLF ❤❤❤
       Antworten 
    Sind Sie sicher, dass Sie …  Ja  Nein
    Ihre Nachricht erscheint hier
  • Uterine Fibroids Cure, Discover How To Eliminate Almost, All Uterine Fibroids Within 8 Weeks..  http://t.cn/Aig7c6mX
       Antworten 
    Sind Sie sicher, dass Sie …  Ja  Nein
    Ihre Nachricht erscheint hier

Fink truss (w type)

  1. 1. ROOF TRUSSES FINK TRUSS - W-TYPE DRAWN BY MICHAEL NAUTH
  2. 2. The roof triangle usually is isosceles (equal sides) and it extends from wall to wall at its base. The two sides meet in the centre at the peak.
  3. 3. The slope or angle of the roof is stated as a unit rise (in ins.) over the unit run (12”), in this case 7/12. The Span of the building is 6’, the total Run is ½ of the Span or 3’ (36”), and the Rise is 7” x 3 or 21”.
  4. 4. The top chords of the roof truss are placed above the roof triangle and the bottom chord is placed below. The Span in then divided into thirds and quarters in order to locate the ends of the webs.
  5. 5. The centre of the compression webs run from the ¼ point on the top chord to the ⅓ point on the bottom chord. N.B. The ¼ point is projected up from the Span or bottom chord.
  6. 6. The tension webs run from the peak to meet the compression web at the bottom chord.
  7. 7. Triangular bearing blocks are placed between the top and bottom chords to transfer roof load to the bottom chord and then to the walls. Compression webs longer than 6’ (1.8m) must be laterally braced.
  8. 8. Gussets (metal or plywood) are applied to both sides of the truss to keep the joints together. The truss plant applies metal plates with a hydraulic press. Plywood is ½” Douglas Fir and nails are 3” long and cleated over.
  9. 9. The components of the truss are labelled. The base of the truss triangle is the sum of the Total Run and the Projection. The hypotenuse of the unit triangle (unit length) and is calculated using Pythagoras’s theorem.
  10. 10. Using Similar Triangles, the length (X) of the Top Chord is determined. X/42 = 13.89/12 X = (42 x 13.89) 12 = 48.615” or 4’ ⅝”. Trusses are built on a flat surface and the pieces are cut to suit the layout marks.

×